糖苷基季铵盐与十二烷基硫酸钠复配性能的研究

研究了糖苷基季铵盐(CAPG)与十二烷基硫酸钠(K12)复配体系的稳定性、表面活性、泡沫性能和润湿性能.结果表明:CAPG与K12复配体系的稳定性好,并表现出很好的协同增效作用.当n(CAPG)∶ (K12)等于0.1∶ 1,0.3∶ 1,0.5∶ 1时,复配体系的临界胶束浓度(cmc)分别为0.081 mmol/L,0.065 mmol/L,0.054 mmol/L,大大低于单一组分的cmc,临界胶束浓度时的表面张力(γcmc)比单一组分略低,起泡力和泡沫稳定性均好于单一组分,润湿力比K12略低,但比CAPG好得多.     

烷基糖苷-十二烷基甜菜碱复配性能及无机盐的影响

考察了非离子型表面活性剂烷基糖苷(APG)和两性表面活性剂十二烷基甜菜碱(BS-12)之间的复配性能,测定了不同摩尔比的APG和BS-12复配体系的表面张力、泡沫和乳化性能,并且研究了无机盐对复配体系表面活性的影响。结果表明,与单独任一表面活性剂体系相比,APG和BS-12复配体系具有较好的表面活性,呈现明显的协同增效作用;在摩尔比为3∶7时,复配体系的表面活性最高、起泡性能最好、形成的泡沫和乳状液最稳定,协同增效作用最显著。此外,无机盐的加入提高了复配体系的表面活性,当NaCl浓度为0.03mol/L时,表面张力和临界胶束浓度最小,表面活性最高;而对于无机盐,其离子价态越高,提高表面活性程度越明显;相比之下,阳离子提高复配体系表面活性的能力大于阴离子。     

芳基油酸酰胺羟丙基磺基甜菜碱的合成及性能

合成了3种具有不同疏水基团的新型磺基甜菜碱两性表面活性剂,通过红外光谱对它们的结构进行了表征。 用滴体积法测定表面活性剂水溶液在25 ℃下的表面张力,从而确定其临界胶束浓度(cmc)及临界胶束浓度下的表面张力(γcmc);采用罗氏泡沫仪考察了浓度、温度对其泡沫性能的影响;采用分水时间法考察了其乳化性能。 结果表明,随着芳环在烷基链中的体积增大,cmc以及γcmc增大,饱和吸附面积Amin增大,而饱和吸附量Γmax减小。 3种表面活性剂的起泡性随浓度增大而增加,到一定值后趋于稳定;泡沫稳定性随浓度增大逐渐增强;起泡性随着温度的升高而显著增加,泡沫稳定性随温度升高而显著降低。 3种表面活性剂的乳化能力随浓度增大而逐渐增强然后趋于稳定。     

醇醚糖苷与纳米膨润土颗粒稳定乳状液的协同作用

以表面活性剂醇醚糖苷(AEG)和纳米膨润土颗粒(NPT-2)为乳化剂,制备了油酸甲酯乳状液,考察了AEG与NPT-2的配比对乳液体系稳定性和乳液粒径的影响,并通过表面张力和zeta电位测量对二者复配稳定乳液的机理进行了讨论。结果表明,单一使用表面活性剂AEG或者纳米膨润土颗粒NPT-2均不能得到稳定的油酸甲酯乳状液,将二者复配则乳液的稳定性有显著提高。固定AEG量逐渐增加NPT-2乳液粒径先增大后又减小,固定NPT-2量逐渐增加AEG,乳液体系粒径逐渐变小;AEG与NPT-2复配前后体系的表面张力曲线"滞后"现象及zeta电位的升高表明,AEG分子在纳米颗粒NPT-2上发生了吸附,协同稳定乳状液。     

烷基糖苷-十二烷基甜菜碱复配性能及无机盐的影响

本文考察了非离子型表面活性剂烷基糖苷（APG）和两性表面活性剂十二烷基甜菜碱（BS-12）之间的复配性能,测定了不同摩尔比的APG和BS-12复配体系的表面张力、泡沫和乳化性能,并且研究了无机盐对复配体系表面活性的影响情况。研究结果表明,APG和BS-12复配体系与单独任一表面活性剂体系相比具有较好的表面活性,两者具有明显的协同增效作用,且在摩尔比为3:7时,复配体系的表面活性最高、起泡性能最好、形成的泡沫和乳状液最稳定,协同增效作用最显著。此外,无机盐的加入提高了复配体系的表面活性,当NaCl浓度为0.0     

无机盐介导的月桂酰谷氨酸钠界面性能研究

以月桂酰谷氨酸钠(SLG)为研究对象,分析NaCl、KCl对SLG表面活性、泡沫及乳化性能的影响。结果显示：当NaCl与SLG的摩尔比为1:20时,临界胶束浓度(cmc)无明显变化,泡沫体积略微增大,乳化性能无变化。当NaCl与SLG的摩尔比为2∶1时,cmc降低65%,泡沫体积降低30%,乳液出现了分层,乳化粒子变大。当KCl与SLG的摩尔比为1:20时,对cmc的影响不大,泡沫体积基本不变,乳液稳定性无变化。当KCl与SLG的摩尔比为2∶1时,cmc值降低62.5%,泡沫体积降低17.8%,乳液静置后分层,乳化粒子聚集。因此可知,无机盐对于SLG表面活性具有一定的正面效应,但是会降低其泡沫及乳化性能,NaCl相较于KCl影响更明显。     

系列磺丁基甜菜碱的表征及表面活性

用FT-IR、1H NMR和元素分析对自制的3种磺丁基甜菜碱(SBm-4)的结构进行了表征,研究了它们的表面性能、泡沫性能和乳化性能。 获得SB12-4的cmc为2.20×10-3 mol/L,γcmc为31.48 mN/m;SB14-4的cmc为2.80×10-4 mol/L,γcmc为29.68 mN/m;SB16-4的cmc为2.30×10-5 mol/L,γcmc为32.06 mN/m。 3种磺丁基甜菜碱的cmc值随着烷基链长增加逐渐减小,γcmc先减小后增加,三者的起泡性随浓度增加而增加,到一定值后保持不变;泡沫稳定性随浓度增加逐渐增强,起泡性随着温度的增加有缓慢增加趋势,泡沫稳定性随温度增加逐渐降低。 3种表面活性剂的乳化能力随浓度增加先增加后降低。     

十二烷基伯胺盐酸盐与十二烷基聚氧乙烯硫酸钠复配体系中的表面性质

研究了十二烷基胺盐酸盐(DAC)和十二烷基聚氧乙烯硫酸钠(AES)复配体系的表面性质与胶束化行为.发现该体系在广泛的复配比例区间和温度区间内保持了极为优异的表面活性,测定了该体系的临界胶束浓度(cmc)与其对应的表面张力(γcmc)的具体值,并研究了温度、pH值和离子强度等环境因素对相关体系的影响.     

十二醇聚氧乙烯醚的表面性能及在水悬浮剂中的应用

探讨了十二醇聚氧乙烯醚(AEO)的EO链长对其临界胶束浓度(cmc)、表面张力(γcmc)、胶束生成自由能(ΔGm)、分子面积(Acmc)和亲水亲油平衡(HLB)值等表面性能的影响;同时研究了不同EO链长的AEO对质量分数25%代森锰锌水悬浮剂(SC)的流变性能[黏度、储能模量(G’)、流动点时的应变(γflow)、触变性]和物理贮存性能(热贮前悬浮率、热贮后悬浮率和倾倒性)的影响.结果发现,AEO的cmc,γcmc,ΔGm,Acmc和HLB值随着EO链长的增加而增大;AEO能够明显改善代森锰锌SC的黏度,以AEO-9所制备的SC黏度最小,且AEO的EO链长越长,所对应的SC结构恢复越慢,恢复慢的样品其倾倒残留率过高;G’和γflow能反映SC内部结构变化,可作为评价农药SC物理稳定性流变学指标.     

三联阳离子表面活性剂的合成及复配性能

以环氧氯丙烷、叔胺、甘油为主要原料,水为溶剂,经过开环、季铵化反应,合成了新型三联季铵盐阳离子表面活性剂(Ⅲ-12-4),得率为86.9%。采用质谱和元素分析测试技术对产物结构进行表征,证明所得产物即为目标产物。通过采用DCA-315型表面张力及动态接触角分析仪对表面张力的测定研究了其与十二烷基硫酸钠(SDS)复配体系的表面化学性质,稳态荧光探针法考察了微极性变化,还得到了胶束聚集数。结果表明,复配体系与单一体系相比,具有更低的临界胶束浓度(cmc)和降低表面张力的效能,表现出协同效应。当n(Ⅲ-12-4)∶n(SDS)=3∶7时,复配体系的临界表面张力(γcmc)和临界胶束浓度分别为16.95mN/m和1.33×10-5mol/L,并且胶束聚集数只有SDS的1/6,混合胶束结构紧密,微极性降低。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.