Development and application of liquid and gas-chromatographic speciation techniques with element specific (ICP-MS) detection to the study of anaerobic arsenic metabolism

Following the observation of volatile hydride and methylated arsenic species in the gases released from sewage treatment facilities and municipal landfills, we have developed a method for investigating the production of such gases by an anaerobic organism. Here we report the application of high performance ion chromatography (HPIC), hydride generation gas chromatography (HG-GC), and purge and trap gas chromatography (PT-GC), coupled with inductively-coupled plasma mass spectrometry (ICP-MS) to study the formation of ionic and volatile arsenic compounds produced in a batch culture of the anaerobic methanogen Methanobacterium formicicum. In this time course experiment we observed arsenite, mono- and dimethylated arsenic acid, arsine, mono-, di- and trimethylarsine, as well as a currently unknown volatile arsenic species.     

Determination of trimethylsilanol in the environment by LT-GC/ICP-OES and GC-MS

The combination of element-specific investigation by low temperature gas chromatography coupled on-line with inductively coupled plasma optical emission spectroscopy (LT-GC/ICP-OES) and gas chromatography using mass spectrometry detection (GC-MS), as an additional analytical technique for molecular identification, was employed for the determination of volatile organosilicon species. Gaseous and liquid samples from waste deposit sites, waste composting tanks and sewage-disposal plants were investigated. It was frequently possible to identify the labile silanol compound trimethylsilanol as a dominant silicon species in waste disposal and waste composting gases. The results presented give rise to the assumption that trimethylsilanol is a volatile product of the degradation of organosilicon materials under special environmental conditions. Received: 24 July 1997 / Revised: 8 October 1997 / Accepted: 21 October 1997     

Antimony biomethylation by mixed cultures of micro-organisms under anaerobic conditions

The volatile antimony compound trimethylantimony (TMA) was detected in headspace gases over anaerobic soil enrichment cultures spiked with potassium antimony tartrate. The presence of TMA was variable (12 positives from 104 cultures) and dependent upon both the inoculum source (environmental sample) and enrichment culture conditions. Positives for TMA formation were obtained with variable frequency for four of the six soils tested and for three types of enrichment culture, designed to encourage growth of nitrate-reducing, methane-producing or fermentative bacteria. The identity of the volatile antimony compound produced in each of the three types of enrichment culture was confirmed by gas chromatography–mass spectrometry and gas chromatography–atomic absorption spectroscopy. There was no evidence of any other volatile antimony compound in the headspace gases. These data suggest that the capability to generate TMA is widely distributed in the terrestrial environment and is attributable to different metabolic types of micro-organisms. © 1998 John Wiley & Sons, Ltd.     

Identification of extracellular arsenical metabolites in the growth medium of the microorganisms apiotrichum humicola and scopulariopsis brevicaulis

The separation and identification of some of the arsenic species produced in cells present in the growth medium when the microorganisms Apiotrichum humicola (previously known as Candida humicola) and Scopulariopsis brevicaulis were grown in the presence of arsenicals were achieved by using hydride generation–gas chromatography–atomic absorption spectrometry methodology (HG GC AA). Arsenite, monomethylarsonate, dimethylarsinate and trimethylarsine oxide were detected following incubation with arsenate. With arsenite as a substrate, the metabolites were monomethylarsonate, dimethylarsinate and trimethylarsine oxide; monomethylarsonate afforded dimethylarsinate and trimethylarsine oxide, and dimethylarsinate afforded trimethylarsine oxide. Trimethylarsine was not detected when the arsenic concentration was 1 ppm.     

Bioaccumulation and excretion of arsenic compounds by a marine unicellular alga,polyphysa peniculus

Polyphysa peniculus was grown in artificial seawater in the presence of arsenate, arsenite, monomethylarsonate and dimethylarsinic acid. The separation and identification of some of the arsenic species produced in the cells as well as in the growth medium were achieved by using hydride generation–gas chromatography–atomic absorption spectrometry methodology. Arsenite and dimethylarsinate were detected following incubation with arsenate. When the alga was treated with arsenite, dimethylarsinate was the major metabolite in the cells and in the growth medium; trace amounts of monomethylarsonate were also detected in the cells. With monomethylarsonate as a substrate, the metabolite is dimethylarsinate. Polyphysa peniculus did not metabolize dimethylarsinic acid when it was used as a substrate. Significant amounts of more complex arsenic species, such as arsenosungars, were not observed in the cells or medium on the evidence of flow injection–microwave digestion–hydride generation–atomic absorption spectrometry methodology. Transfer of the exposed cells to fresh medium caused release of most cell–associated arsenicals to the surrounding environment.     

Determination of trimethylsilanol in the environment by LT-GC/ICP-OES and GC-MS

The combination of element-specific investigation by low temperature gas chromatography coupled on-line with inductively coupled plasma optical emission spectroscopy (LT-GC/ICP-OES) and gas chromatography using mass spectrometry detection (GC-MS), as an additional analytical technique for molecular identification, was employed for the determination of volatile organosilicon species. Gaseous and liquid samples from waste deposit sites, waste composting tanks and sewage-disposal plants were investigated. It was frequently possible to identify the labile silanol compound trimethylsilanol as a dominant silicon species in waste disposal and waste composting gases. The results presented give rise to the assumption that trimethylsilanol is a volatile product of the degradation of organosilicon materials under special environmental conditions.     

Observations on toxicologically relevant arsenic in urine in adult offspring of families with Balkan Endemic Nephropathy and controls by batch hydride generation atomic absorption spectrometry

The aim of this study was to develop a method for the characterization of internal exposure to arsenic, which is thought to play a role in the development of a kidney disease, known as Balkan Endemic Nephropathy, typical for a district in Bulgaria, and to investigate whether the As body burden differs in the offspring versus control individuals. For this case study, an analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate, and dimethylarsinate) in urine by batch-type hydride generation atomic absorption spectrometry was developed. Optimization experiments for levelling off the sensitivity of inorganic arsenic and its mono- and dimethylated species in dilute HCl–L-cysteine medium were performed. The limit of detection for hydride forming arsenic fraction was 0.5?ng As, i.e. 0.25?µg?L^?1 in 10?mL of 1?+?4 v/v diluted urine. The relative standard deviation was typically 1.5–1.8% for aqueous solution and 2–6% for urine samples at 1.0?µg?L^?1 As. The sample throughput rate was 15?h^?1. No statistical correlation and cross-correlation between individuals case-control and sex at 95% confidence were found: controls (n?=?99), mean 3.5?±?2.1 (SD), range 0.9–10.4, median 3.0?µg?L^?1 As and cases (n?=?102), mean 3.6?±?2.2 (SD), range 0.5–11.0, median 3.2?µg?L^?1 As. On the basis of this study, arsenic can be excluded as a factor involved in BEN development.     

Determination of arsenic species in human urine using HPLC with on-line photooxidation or microwave-assisted oxidation combined with flow-injection HG-AAS

An improved analytical procedure is presented for the separation and simultaneous determination of hydride-forming (toxic) and not hydride-forming (non-toxic) arsenic species in human urine. Separation was performed by cation-exchange chromatography using a new solid phase type based on the continuous bed chromatography (CBC) technology. This column permits by a factor of 4 higher flow rates than conventional columns resulting in a drastical reduction of retention times without any loss of resolution. Using this type of column, arsenobetaine (AsBet), arsenocholine (AsChol), and dimethylarsinic acid (DMA) were separated from the more toxic arsenic species arsenous acid (As(III)), arsenic acid (As(V)), and methylarsonic acid (MA) within only 4 min. The HPLC system was coupled via a flow injection system and either a UV or a microwave (MW) reactor to the HG-AAS instrument. UV photolysis and MW digestion were used to transform AsBet and AsChol to hydride-forming species and to make them accessible to HG-AAS. UV photolysis turned out to be more suitable for this application than MW digestion, because the latter technique led to peak broadening and poorer performance. The described procedure was applied to the determination of arsenic species in urine samples of non-occupationally exposed persons before and 12 h after seafood consumption. Detection limits were about 1 μg/L for each arsenic species. After consumption, the AsBet and DMA excretion increased by at least a factor of 150 for AsBet and by a factor of 6 for DMA, respectively, while the excretion of the other species did not increase significantly. This invalidates the use of total urinary arsenic as well as total hydride-forming arsenic as an indicator for exposure to inorganic arsenic. Received: 12 August 1998 / Revised: 30 October 1998 / Accepted: 24 November 1998     

Speciation of inorganic and organic arsenic in marine sediments from La Coru?a estuary

The speciation of As(III), As(V), MMA and DMA in marine sediments from La Coruña estuary is described. The arsenic species have been separated by ion-exchange chromatography and detected by hydride generation atomic absorption spectrometry (HGAAS). The redox potential has been determined in order to relate the concentration of arsenic species to this parameter.     

Speciation of volatile antimony compounds in culture headspace gases of Cryptococcus humicolus using solid phase microextraction and gas chromatography–mass spectrometry

Direct analysis of the volatile antimony compounds stibine (SbH₃), monomethylantimony, dimethylantimony (Me₂Sb) and trimethylantimony (Me₃Sb) using solid phase microextraction (SPME) with polydimethylsiloxane fibres and gas chromatography–mass spectrometry (GC–MS) is described. The best analyte to background signal ratio was achieved using a 20 min extraction time. Antimony species were separated using a 3% phenylmethylsilicone capillary column operated at a column pressure of 70 kPa, a flow rate of 1.4 ml min^?1 and temperature ramping from 30 to 36 °C at 0.1 °C min^?1. Cryogenic focusing of desorbed species was required to achieve resolution of antimony species. The optimized SPME–GC–MS method was applied to the analysis of headspace gases from cultures of Cryptococcus humicolus incubated with inorganic antimony(III) and (V) substrates. The headspace gases from biphasic (aerobic–anaerobic) biomass‐concentrated culture incubations revealed the presence of SbH₃, Me₂Sb and Me₃Sb. Stibine was the major antimony species detected in cultures amended with inorganic antimony(V). Me₃Sb was the sole volatile antimony species detected when cultures were amended with antimony(III). Copyright © 2002 John Wiley & Sons, Ltd.     

Methylated arsenic species in estuarine porewaters

Inorganic arsenic, monomethylarsenic and dimethylarsenic species have been observed in samples of sediment porewater collected from the Tamar Estuary in South-West England. Porewater samples were collected using in situ dialysis. The arsenic species were separated by hydride generation and concentrated by liquid nitrogen trapping, prior to analysis by directly coupled gas chromatography-atomic absorption spectroscopy. The predominant dissolved arsenic species present was inorganic arsenic (5-62 m?g dm^?3). However, this is the first time significant concentrations of methylated arsenic species have been quantified in estuarine porewaters (0.04–0.70 m?g dm^?3), accounting for between 1 and 4% of the total dissolved arsenic. The presence of methylated arsenic compounds in porewaters is attributed to in situ environmental methylation, although the possibility of methylated arsenic species being derived from biological debris cannot be excluded.     

Analysis of gaseous arsenic species and stability studies of arsine and trimethylarsine by gas chromatography-mass spectrometry

A rapid method based on gas chromatography-mass spectrometry was developed for analysis of four volatile arsenic species: arsine, monomethylarsine (MMA), dimethylarsine (DMA) and trimethylarsine (TMA). With the proposed method gaseous arsenic species could be determined in less than 2 min and no pre-treatment for gas phase samples was needed, which minimized the risks of species conversion before analysis. The detection limits for different species were 24–174 pg. The standards for arsine, MMA and DMA were prepared by reaction between arsenic acid, monomethylarsonic acid or dimethylarsinic acid with tetrahydroborate(III) and nitric acid. The effect of pH on recovery of different arsine species was examined and is discussed. The TMA was obtained commercially as liquid. Also stability of inorganic (arsine) and organic (TMA) gaseous arsenic species in air was studied as a function of time.     

Biomethylation of Arsenic in an Arsenic-rich Freshwater Environment

Arsenic circulation in an arsenic-rich freshwater ecosystem was elucidated to detect arsenic species in the river water and in biological samples living in the freshwater environment. Water-soluble arsenic compounds in biological samples were extracted with 70% methanol. Samples containing arsenic compounds in the extracts were treated with 2 mol dm³ of sodium hydroxide and reduced with sodium borohydride. The detection of arsenic species was accomplished using a hydride generation/cold trap/cryofocus/gas chromatography-mass spectrometry (HG/CT/CF/GC-MS) system. The major arsenic species in the river water, freshwater algae and fish are inorganic arsenic, dimethylarsenic and trimethylarsenic compounds, respectively. Trimethylarsenic compounds are also detected in aquatic macro-invertebrates. The freshwater unicellular alga Chlorella vulgaris, in a growth medium containing arsenate, accumulated arsenic and converted it to a dimethylarsenic compound. The water flea Daphnia magna, which was fed on arsenic-containing algae, converted it to a trimethylarsenic species. © 1997 by John Wiley & Sons, Ltd.     

Determination of arsenic species in oyster tissue by microwave‐assisted extraction and liquid chromatography–atomic fluorescence detection

A method for the determination of arsenic species in oyster tissue is established. The extraction of arsenic species is carried out by using low‐power microwaves. Quantitative extraction is obtained at a power of 40 W, and in 5 min, using the extracting agent methanol/water (1 + 1). The measurements are carried out using liquid chromatography–UV irradiation–hydride generation–atomic fluorescence detection (LC–UV–HG–AFS). Three arsenic species were detected in oyster tissue: arsenobetaine (AsBet) (87%), a probable arsenosugar (AsS) (4.9%), and dimethylarsinate (DMA) (4.7%). No influence of the clean‐up, the microwave field or the IR drying system on the stability of the arsenic compounds was observed. The extracts can be kept stable up to 3 days at 4 °C. The performance of the method is proved on fresh samples, as they are usually analysed in routine laboratories. Copyright © 2001 John Wiley & Sons, Ltd.     

Investigation into the determination of trimethylarsine in natural gas and its partitioning into gas and condensate phases using (cryotrapping)/gas chromatography coupled to inductively coupled plasma mass spectrometry and liquid/solid sorption techniques

Speciation of trialkylated arsenic compunds in natural gas, pressurized and stable condensate samples from the same gas well was performed using (Cryotrapping) Gas Chromatography-Inductively Coupled Plasma Mass Spectrometry. The major species in all phases investigated was found to be trimethylarsine with a highest concentration of 17.8 ng/L (As) in the gas phase and 33.2 μg/L (As) in the stable condensate phase. The highest amount of trimethylarsine (121 μg/L (As)) was found in the pressurized condensate, along with trace amounts of non-identified higher alkylated arsines. Volatile arsenic species in natural gas and its related products cause concern with regards to environment, safety, occupational health and gas processing. Therefore, interest lies in a fast and simple field method for the determination of volatile arsenicals. Here, we use simple liquid and solid sorption techniques, namely absorption in silver nitrate solution and adsorption on silver nitrate impregnated silica gel tubes followed by total arsenic determination as a promising tool for field monitoring of volatile arsenicals in natural gas and gas condensates. Preliminary results obtained for the sorption-based methods show that around 70% of the arsenic is determined with these methods in comparison to volatile arsenic determination using GC-ICP-MS. Furthermore, an inter-laboratory- and inter-method comparison was performed using silver nitrate impregnated silica tubes on 14 different gas samples with concentrations varying from below 1 to 1000 μg As/m³ natural gas. The results obtained from the two laboratories differ in a range of 10 to 60%, but agree within the order of magnitude, which is satisfactory for our purposes.     

Speciation of major arsenic species in seawater by flow injection hydride generation atomic absorption spectrometry

Arsenic present at 1 μg L^–1 concentrations in seawater can exist as the following species: As(III), As(V), monomethylarsenic, dimethylarsenic and unknown organic compounds. The potential of the continuous flow injection hydride generation technique coupled to atomic absorption spectrometry (AAS) was investigated for the speciation of these major arsenic species in seawater. Two different techniques were used. After hydride generation and collection in a graphite tube coated with iridium, arsenic was determined by AAS. By selecting different experimental hydride generation conditions, it was possible to determine As(III), total arsenic, hydride reactive arsenic and by difference non-hydride reactive arsenic. On the other hand, by cryogenically trapping hydride reactive species on a chromatographic phase, followed by their sequential release and AAS in a heated quartz cell, inorganic As, MMA and DMA could be determined. By combining these two techniques, an experimental protocol for the speciation of As(III), As(V), MMA, DMA and non-hydride reactive arsenic species in seawater was proposed. The method was applied to seawater sampled at a Mediterranean site and at an Atlantic coastal site. Evidence for the biotransformation of arsenic in seawater was clearly shown.     

Determination of inorganic arsenic species As(III) and As(V) by high performance liquid chromatography with hydride generation atomic absorption spectrometry detection

The paper presents the principles and advantages of a technique combining high performance liquid chromatography and hydride generation atomic absorption spectrometry (HPLC-HGAAS) applied to speciation analysis of inorganic species of arsenic As(III) and As(V) in ground water samples. With separation of the arsenic species on an ion-exchange column in the chromatographic system and their detection by the hydride generation atomic absorption spectrometry, the separation of the analytical signals of the arsenic species was excellent at the limits of determination of 1.5 ng/ml As(III) and 2.2 ng/ml As(V) and RSD of 4.3% and 7.8% for the concentration of 25 ng/ml. The hyphenated technique has been applied for determination of arsenic in polluted ground water in the course of the study on migration of micropollutants. For total arsenic concentration two independent methods: HGICP-OES and HGAAS were used for comparison of results of real samples analysis.     

Arsenic speciation in some environmental samples: a comparative study of HG–GC–QFAAS and HPLC–ICP–MS methods

Some water and soil extracts polluted with arsenic, and a sewage sludge certified for total arsenic have been analysed by high‐performance liquid chromatography–inductively coupled plasma–mass spectrometry (HPLC–ICP–MS) and hydride generation–gas chromatography– quartz furnace atomic absorption spectrometry (HG–GC–QFAAS techniques.) Detection limits in the range of 200–400 and 2–10 ng l⁻¹ respectively allowed the determination of inorganic [As(III), As(V)] and methylated (DMA, MMA, TMAO) arsenic species present in these samples. Results obtained by both methods are well correlated overall, whatever the arsenic chemical form and concentration range (8–10 000 μg l⁻¹). Comparison of these results enabled us to point out features and disadvantages of each analytical method and to reach a conclusion that they are suitable for arsenic speciation in these environmental matrices. Copyright © 2000 John Wiley & Sons, Ltd.     

Speciation of arsenic of liquid and gaseous emissions from soil in a microcosmos experiment by liquid and gas chromatography with inductively coupled plasma mass spectrometer (ICP-MS) detection

Gas chromatography and high-performance liquid chromatography coupled to a double focusing sectorfield ICP-MS as sensitive element specific detector are used for the speciation of arsenic of liquid and gaseous emissions from soil samples, which were equilibrated in a microcosmos experiment. Speciation of liquid samples was performed by HPLC and hydride generation was used as introduction system to ICP-MS. An online prereduction step was introduced to enhance the sensitivity for As(V). A home-built and laboratory-ready transfer line from GC to ICP-MS is presented and quantification of As in gaseous emissions was performed by external calibration via hydride generation. The microcosmos experiment revealed only low production rates of organoarsenic compounds and reflected a limited capability of the biovolatilization experiment for the simulation of natural systems. Received: 2 December 1998 / Revised: 3 February 1999 / Accepted: 5 February 1999     

Evaluation of atomic fluorescence spectrometry as a sensitive detection technique for arsenic speciation

The potential of coupling anion-exchange high-performance liquid chromatography, hydride generation and atomic fluorescence spectrometry (HPLC–HG–AFS) for arsenic speciation is considered. The effects of hydrochloric acid and sodium tetrahydroborate concentrations on signal-to-background ratio, as well as argon and hydrogen flow rates, were investigated. Detection limits for arsenite, dimethylarsinic acid (DMA), monomethylarsonic acid (MMA) and arsenate were 0.17, 0.45, 0.30 and 0.38 μg l⁻¹, respectively, using a 20-μl loop. Linearity ranges were 0.1–500 ng for As(III) and MMA (as arsenic), and 0.1–800 ng for DMA and As(V) (as arsenic). Arsenobetaine (AsB) was also determined by introducing an on-line photo-oxidation step after the chromatographic separation. In this case the limits of detection and linear ranges for the different species studied were similar to the values obtained previously for As(V). The technique was tested with a human urine reference material and a volunteer's sample. © 1998 John Wiley & Sons, Ltd.