乙炔-氧气混合气体强爆轰参数的理论估算与实验研究

 针对非定常的气相强爆轰过程,建立了气相爆轰的理论计算模型,结合C-J理论和多方气体物态方程,对乙炔-氧气混合气体的强爆轰参数进行了理论估算,并在激波管中开展了化学计量比的乙炔-氧气混合气体的强爆轰实验。对比研究表明：爆速的理论估算值与实验值符合较好,证实了采用C-J理论估算气相强爆轰参数的可行性,计算数据具有一定的参考价值。     

拐角空间中悬浮铝粉尘爆轰后效的三维数值模拟

建立三维的铝粉-空气两相爆轰计算模型,采用时-空守恒元解元（CE/SE）方法求解,并开发了悬浮铝粉尘爆轰的三维数值模拟程序.基于消息传递接口（MPI）技术实现了程序的并行化设计.通过对激波管问题以及爆轰管中铝粉-空气两相爆轰实验的模拟验证程序的可靠性.对拐角空间中左侧浓度为368 g·m^-3的铝粉-空气混合物两相爆轰及其在拐角空间右侧和下方空气域内形成的冲击波和温压效应开展数值模拟,获得复杂空间内爆轰波或冲击波的传播、反射以及绕射过程.结果表明：两相爆轰在离铝粉尘区域2 m远的空气域内产生的后效冲击波能达到2.66 MPa的固壁反射压力,火球燃烧范围会超出初始铝粉尘区域约0.8 m,并且造成初始铝粉尘区域附近1.5 m范围内空气的温度高达1 600 K.模拟程序可用于铝粉尘爆轰的后效研究,对工业安全及其防护具有指导意义.     

一种准二维柱面爆炸波加载装置的设计与验证

基于竖直爆轰管和径向Hele-Shaw Cell,设计并搭建了一套准二维柱面爆炸波加载装置,可以实现对Hele-Shaw Cell内部材料界面的径向冲击加载.竖直爆轰管内部的预混气体在底部点燃后,形成向上传播的冲击波,冲击波冲破爆轰管开口与Hele-Shaw Cell底板开孔之间的隔膜后,被Hele-Shaw Cell...     

Investigating shock-wave transient processes in explosives by means of synchrotron radiation

The results from studying the transient processes induced by a shock in porous TATB, obtained using an original and tested method based on employing the soft X-ray component of synchrotron radiation, are presented. The method enables us to determine the parameters of a shock-wave striker, the distribution of velocity and density behind the front of the shock and detonation wave, and the characteristics of flow after a shock wave is reflected from a rigid wall, all in one experiment. Trials with charges 1.8 and 1.9 g/cm³ in density show that modes such as the absence of detonation and initiation in direct and reflected shock waves, are possible depending on the loading conditions.     

凝聚炸药爆轰波在高声速材料界面上的折射现象分析

凝聚炸药爆轰在边界高声速材料约束下传播时,爆轰波会在约束材料界面上产生复杂的折射现象.本文针对凝聚炸药爆轰波在高声速材料界面上的折射现象展开理论和数值模拟分析.首先通过建立在爆轰ZND模型上的改进爆轰波极曲线理论给出爆轰波折射类型,然后发展一种求解爆轰反应流动方程的基于特征理论的二阶单元中心型Lagrange计算方法来数值模拟典型的爆轰波折射过程.从改进爆轰波极曲线理论和二阶Lagrange方法数值模拟给出的结果看出,凝聚炸药爆轰波在高声速材料界面上的折射类型有四种:反射冲击波的正规折射、带束缚前驱波的非正规折射、带双Mach反射的非正规折射、带λ波结构的非正规折射.     

Direct detonation initiation with thermal deposition due to pore collapse in energetic materials – towards the coupling between micro- and macroscale

In this work we investigate the initiation of detonations in energetic materials through thermal power deposition due to pore collapse. We solve the reactive Euler equations, with the energy equation augmented by a power deposition term. The deposition term is partially based on previous results of simulations of pore collapse at the microscale, modelled at the macroscale as hotspots. It is found that a critical size of the hotspots exists. If the hotspots exceed the critical size, direct initiation of detonation can be achieved even with a low power input, in contrast to the common assumption that a sufficient power is necessary to initiate detonation. We show that sufficient power is necessary only when the size of the hotspots is below the critical size. In this scenario, the so-called ‘explosion in the explosion’, the initial ignition does not lead to a detonation directly, but detonation occurs later as a result of shock-to-detonation transition in the region processed by the shock wave generated by the initial ignition.     

Recovery and suppression of the detonation of hydrogen-air mixtures at an obstacle with orifices

A numerical simulation of the interaction of detonation waves with an obstacle having orifices and an analysis of the results were performed. The calculations were conducted using the 3D GasDynamicTool code for a model gas with parameters of detonation corresponding to a hydrogen-air stoichiometric mixture under normal conditions. Within the framework of the assumptions made, it was shown that, upon interaction with a perforated partition, a detonation wave experiences disintegration accompanied by the formation of unsteady jets of detonation products, with each one being preceded by a shock wave. The simulations demonstrated that the reinitiation of detonation downstream from the partition is determined by the dynamics of the ignition caused by the interaction between the converging shock waves formed ahead of the jets outflowing from neighboring orifices.     

Formation of detonation waves in channels and interaction of the waves with penetrable screens

Two-dimensional channel flows with shock waves resulting from the detonation of a combustible gas mixture are considered. Conditions for detonation and the parameters of the shock waves are determined. The feasibility of reducing the shock wave intensity and loads on the structure by mounting a set of mesh screens in the channel is investigated. The numerical computation of detonation initiation in an air-hydrogen mixture and subsequent passage of shock waves through the mesh screens is carried out. Basic quantitative characteristics of shock wave reduction depending on the mesh screen penetrability and mutual arrangement of variously penetrable screens are obtained.     

隔板深度对激波聚焦起爆影响的数值模拟研究

考虑几何结构参数对激波聚焦触发爆轰波的复杂影响,对H2/Air预混气的环形射流激波聚焦起爆现象开展了数值模拟研究,详细分析了不同隔板深度条件下的激波聚焦过程、流场演化特征以及爆轰波参数变化规律。研究结果表明,凹腔内激波聚焦诱导的局部爆炸以及隔板前缘处射流形成"卷吸涡"是引起爆轰波触发的两个重要机制,而隔板深度是影响环形射流激波聚焦起爆性能的关键因素。随着隔板深度的增加,凹腔内激波聚焦的强度逐步增强,回传的能量损失有所减小,进而导致爆燃转爆轰的距离与时间显著缩短。此外,当隔板深度由1 mm逐渐增加至3 mm时,爆轰波自持传播稳定性呈现出先降低后升高的变化趋势,产生这一现象的主要原因是爆轰波强度与三波点运动的相互作用。     

The effects of mixture preburning on detonation wave propagation

Pressure gain combustion in the form of continuous detonations can provide a significant increase in the efficiency of a variety of propulsion and energy conversion devices. In this regard, rotating detonation engines (RDEs) that utilize an azimuthally-moving detonation wave in annular systems are increasingly seen as a viable approach to realizing pressure gain combustion. However, practical RDEs that employ non-premixed fuel and oxidizer injection need to minimize losses through a number of mechanisms, including turbulence-induced shock-front variations, incomplete fuel-air mixing, and premature deflagration. In this study, a canonical stratified detonation configuration is used to understand the impact of preburning on detonation efficiency. It was found that heat release ahead of the detonation wave leads to weaker shock fronts, delayed combustion of partially-oxidized fuel-air mixture, and non-compact heat release. Furthermore, large variations in wave speeds were observed, which is consistent with wave behavior in full-scale RDEs. Peak pressures in the compression region or near triple points were considerably lower than the theoretically-predicted values for ideal detonations. Analysis of the detonation structure indicates that this deflagration process is parasitic in nature, reducing the detonation efficiency but also leading to heat release far behind the wave that cannot directly strengthen the shock wave. This parasitic combustion leads to commensal combustion (heat release far downstream of the wave), indicating that it is the root cause of combustion efficiency losses.     

低温下JB-9014钝感炸药DSD参数研究

 爆轰冲击波动力学（Detonation Shock Dynamics,DSD）是目前研究爆轰波非理想传播的有效途径。利用DSD的广义几何光学模型,研究了大长径比药柱中爆轰波非理想传播现象,根据-30 ℃下直径为10～30 mm药柱的直径效应实验数据,利用遗传算法确定了低温下JB-9014钝感炸药的DSD参数。由DSD参数计算得到了JB-9014药柱中的定态波形和爆速,计算结果与实验结果符合。     

铝粉-空气混合物爆燃转爆轰过程及爆轰波结构

 在长为32.4 m、内径为0.199 m的大型长直水平管道中,对铝粉-空气两相流的燃烧转爆轰（DDT）过程及爆轰波结构进行了实验研究。对铝粉-空气混合物弱点火条件下DDT过程不同阶段的特征进行了分析,实验结果显示混合物经历了缓慢反应压缩阶段、压缩波加速冲击波形成阶段、冲击反应过渡阶段、冲击反应向过压爆轰过渡阶段和爆轰阶段,得到了混合物各阶段的DDT参数,由此进一步分析了DDT浓度的上、下限。在1.4 m爆轰测试段的4个截面的环向上各均匀安装8个传感器,对爆轰波结果进行测试,并对铝粉-空气混合物爆轰波的单头结构进行了分析。     

Shock wave in the flow field of a source and a vortex source in the energy supply zone at thermal crisis

Thermal crisis of a vortex source outflowing initially in regime I into a rarefied space (into vacuum) with a transition of the supersonic flow into the subsonic flow in the shock wave, and into a stagnant space in regime II with final stagnation is considered in the model of a perfect gas with a constant heat capacity. The shock wave can be located in the energy supply zone or outside the energy release zone depending on the preset total pressure at infinity. In the absence of circulation, a cylindrical source is compared with a spherical source. The dependences of energy parameters and temperature, as well as the total pressure and density, on the coordinates of the shock wave are considered. The dependences of the critical parameters of the flow in the wake behind the zone on the coordinate of the heat supply zone, its length, and gas circulation in the cylindrical vortex source are analyzed.     

均匀炸药冲击起爆和起爆后的行为

 介绍并分析了Campbell等人研究均匀炸药冲击起爆和起爆后行为所获得的实验结果,但不涉及其冲击起爆条件。Campbell等人的实验表明,足够强的冲击波进入硝基甲烷后,经过若干微秒的感应时间,爆轰发生在隔板与炸药间的界面处。这就是说,在均匀炸药中,足够强的冲击虽非瞬时但直接（指不经过其它过程,如爆燃）引发了爆轰。重新处理后的实验数据表明：硝基甲烷起爆后,爆轰波的净爆速小于正常爆速;当进入硝基甲烷的初始冲击波的有效压力p_eff由8.82 GPa升至12.14 GPa时,感应时间t_ind的实验值由3.06 μs降至0.705 μs。以两相的排平（A,m）物态方程描述爆轰产物,较为严格地重新推导了基于热起爆理论的估算感应时间t_ind的公式。在上述p_eff的变化范围内,t_ind的理论值则由248 μs降至0.99 μs,明显地高于实验值。这表明,热起爆理论不适于描述硝基甲烷的冲击起爆行为。从本质上讲,热起爆理论对均匀炸药的冲击起爆行为的描述,不符合物质运动的微观图像,因此,它不适于描述均匀炸药的上述行为。     

Calculation of shock wave propagation in water containing reactive gas bubbles

The entry of a shock wave from air into water containing reactive gas (stoichiometric acetylene–oxygen mixture) bubbles uniformly distributed over the volume of the liquid has been numerically investigated using equations describing two-phase compressible viscous reactive flow. It has been demonstrated that a steady-state supersonic self-sustaining reaction front with rapid and complete fuel burnout in the leading shock wave can propagate in this bubbly medium. This reaction front can be treated as a detonation-like front or “bubble detonation.” The calculated and measured velocities of the bubble detonation wave have been compared at initial gas volume fraction of 2 to 6%. The observed and calculated data are in satisfactory qualitative and quantitative agreement. The structure of the bubble detonation wave has been numerically studied. In this wave, the gas volume fraction behind the leading front is approximately 3–4 times higher than in the pressure wave that propagates in water with air bubbles when the other initial conditions are the same. The bubble detonation wave can form after the penetration of the shock wave to a small depth (~300 mm) into the column of the bubbly medium. The model suggested here can be used to find optimum conditions for maximizing the efficiency of momentum transfer from the pressure wave to the bubbly medium in promising hydrojet pulse detonation engines.     

氢氧爆轰波在激波管中的成长机制研究

 针对气相爆轰波成长机制研究,采用压力传感器和高速摄影技术,测试了氢氧混合气体在点火后的火焰波、前驱冲击波以及爆轰波的成长变化过程,计算了冲击波过程参数和气体状态参数,分析了火焰加速机制。实验结果表明,APX-RS型高速摄影系统可用于拍摄气相爆轰波的成长历程;氢氧爆轰波的产生是由于湍流火焰和冲击波的相互正反馈作用,导致反应区内多处发生局部爆炸,爆炸波与冲击波相互耦合,最终成长为定常爆轰波。     

非均匀炸药冲击起爆和起爆后的行为

 介绍并分析了Campbell 等人及其他作者研究非均匀炸药冲击起爆和起爆后行为所获得的实验结果,但不涉及其冲击起爆条件。足够强的冲击波进入非均匀炸药后,爆轰将瞬时（指不经过感应时间）且直接（指不经过其他过程,如爆燃）被引发;非均匀炸药起爆后,其中传播的自始至终是一个不断增长的爆轰波,直至发展为正常爆轰,整个过程都是爆轰的增长（新定义）过程。不存在由反应冲击波不断增长并转变为爆轰波的所谓向爆轰的增长。所谓向爆轰的增长,实际上是爆轰的增长（按新定义）的初期;Craig原定义的爆轰的增长,实际上是爆轰的增长（按新定义）的后期;而所谓反应冲击波,实际上是增长中的初期爆轰波。爆轰的增长（按新定义）是所有猛炸药的特性,炸药反应不充分并逐渐趋于充分是爆轰的增长的化学机制。     

Dynamics and Stability of a Weak Detonation Wave

One dimensional weak detonation waves of a basic reactive shock wave model are proved to be nonlinearly stable, i.e. initially perturbed waves tend asymptotically to translated weak detonation waves. This model system was derived as the low Mach number limit of the one component reactive Navier-Stokes equations by Majda and Roytburd [SIAM J. Sci. Stat. Comput. 43, 1086–1118 (1983)], and its weak detonation waves have been numerically observed as stable. The analysis shows in particular the key role of the new nonlinear dynamics of the position of the shock wave, The shock translation solves a nonlinear integral equation, obtained by Green's function techniques, and its solution is estimated by observing that the kernel can be split into a dominating convolution operator and a remainder. The inverse operator of the convolution and detailed properties of the traveling wave reduce, by monotonicity, the remainder to a small L ₁ perturbation. Received: 17 August 1998 / Accepted: 13 November 1998     

Modelling detonation of heterogeneous explosives with embedded inert particles using detonation shock dynamics: Normal and divergent propagation in regular and simplified microstructure

This paper discusses the mathematical formulation of Detonation Shock Dynamics (DSD) regarding a detonation shock wave passing over a series of inert spherical particles embedded in a high-explosive material. DSD provides an efficient method for studying detonation front propagation in such materials without the necessity of simulating the combustion equations for the entire system. We derive a series of partial differential equations in a cylindrical coordinate system and a moving shock-attached coordinate system which describes the propagation of detonation about a single particle, where the detonation obeys a linear shock normal velocity-curvature (D_n–κ) DSD relation. We solve these equations numerically and observe the short-term and long-term behaviour of the detonation shock wave as it passes over the particles. We discuss the shape of the perturbed shock wave and demonstrate the periodic and convergent behaviour obtained when detonation passes over a regular, periodic array of inert spherical particles.     

以高温燃气为试验介质的爆轰波风洞

为了满足高温燃气流动研究的需求,提出了一种新的实验装置——爆轰波风洞.该风洞基本原理是利用高压气体驱动爆轰波后高温气体,为其提供消除Taylor稀疏波的运动边界条件,使爆轰波后气流保持均匀恒定所需状态.在结构布置上,爆轰波风洞与激波风洞类似,因此很容易利用激波风洞实现爆轰波风洞的运行模式,但两者的流动过程和参数间关系有明显的区别.首先理论分析了爆轰风洞流动过程并得出参数间关系,而后据此开展了实验验证.理论和实验结果表明该装置可以产生多种类型、不同状态的高温燃气,并可实现对燃气状态的准确控制.该装置实验能力和应用范围还能进一步扩展.