产生纳米级暗中空光束的方法研究

用时域有限差分法，给出光纤头近场区电场强度模的空间分布.讨论了当光纤纤芯分别取不同尺寸时，对此空间光场强度的影响.要想得到较大范围的暗中空光束，必须增加光纤纤芯尺寸.并且，对光纤纤芯尺寸取一较大值和光纤中空区域尺寸取一较小值时的情况进行讨论，可得在光纤头附近可以出现与光纤中空区域尺寸大小相当的暗斑(10¹ nm量级).但是，暗中空光束中背景光较强.为此，将光纤的空心设计为金属. 发现此时中心暗斑的背景光明显减弱，在近场区域可获得较为理想的暗中空光束.如进一步缩小光纤中空区域尺寸，可以在光纤头附近获得暗斑更小甚至纳米量级的暗中空光束.为获得一种纳米量级的暗中空光束提供一种方法.     

Generation of dark hollow beam by use of phase-only filtering

A simple but effective scheme to generate dark hollow beams is proposed by use of phase-only filtering and optical Fourier transform. A Gaussian beam of fundamental mode is modulated by a pre-designed phase mask, which is a piecewise modification of an axicon lens, and followed by a Fourier transform to generate an ideal dark hollow beam at the focal plane. This method has an advantage that the total energy of the beam is conserved under paraxial approximation. Numerical calculations are provided to show the validity of the proposed scheme.     

亚微米局域空心光束的产生及其在单原子囚禁与冷却中的应用理论研究

提出了一种采用单模光纤、环形二元相位板和微透镜组成的光束整形系统产生亚微米局域空心光束的方案. 根据瑞利-索莫菲衍射积分公式, 数值计算了微透镜焦平面附近的场分布, 详细研究了空心光束的暗斑尺寸与单模光纤模场半径和微透镜焦距的关系. 数值计算结果表明: 在微透镜焦平面附近光场分布近似对称, 在焦点处场强近似为零, 周围场强逐渐增大, 形成半径约为0.4 μm的三维封闭的球形空心光场区域, 即亚微米局域空心光束. 当局域空心光束为蓝失谐时, 光场中的原子将被囚禁在光场最弱处. 若加上抽运光, 原子将受到蓝失谐局域空心光束与抽运光共同激发的强度梯度Sisyphus冷却. 本文利用该方案产生的亚微米局域空心光束构建单原子的囚禁与冷却器件, 并以单个⁸⁷Rb原子为例, 利用Mont-Carlo方法研究亚微米局域空心光束中单原子囚禁与强度梯度冷却的动力学过程, 结果表明利用该器件可以获得温度在5.8 μK量级的超冷单原子.     

空心光纤的传光机理及其应用性能的研究

摘要对空心光纤的结构特点做了细致的分析,采用迅衰波场的概念来解释空心光纤纤芯与空心处的传光损耗。同时对空心光纤的衰减特性做了实验研究,得到了空心光纤的衰减常数,并且应用于断裂测量。最后,对空心光纤弯曲、拉伸、压缩等机械性能作了实验研究并做出了解释,为空心光纤应用打下了基础。     

介质/金属结构太赫兹空芯光纤的传输特性

理论分析了金属、介质/金属结构空芯光纤在THz波段的模式结构和传输特性.金属空芯光纤支持TE11模式,介质/金属空芯光纤的介质膜厚在取最优值时支持HE11模式.对于波长为200μm的太赫兹波,内径为1 mm的两种空芯光纤,TE11和HE11模式的损耗分别为8.4 dB/m和2 dB/m.为优化介质/金属结构宅芯光纤的传输性能,分析了金属和介质材料的光学常数对衰减系数的影响.基于几种已发表的金属在太赫兹波段的光学常数,计算结果表明铝是最好的选择;初步测量结果显示,在各种树脂材料中聚乙烯在THz波段吸收较小,并且其折射率接近介质膜的最优值1.41,为太赫兹波空芯光纤中介质膜材料的理想选择.     

一种新空心光束的理论及实验研究

提出了一种用来描述空心光束的新理论模型——空心高斯光束模型，通过控制光束参数可以方便地调制空心光束黑斑的大小.导出了空心高斯光束经傍轴光学系统的解析传输变换公式.利用导出的公式计算分析了空心高斯光束在自由空间的传输特性.在实验上利用矩阵本征值方法设计了能输出空心高斯光束的光学谐振腔，对实验上得到的空心高斯光束进行了传输特性的研究.结果表明，理论和实验相吻合.该空心高斯光束产生的光势阱为控制冷原子提供了一条新途径. 关键词： 空心高斯光束 光学谐振腔 传输特性     

Hollow Gaussian Schell-model beam and its propagation

In this paper, we present a new model, hollow Gaussian Schell-model beams (HGSMBs), to describe the practical dark hollow beams. An analytical propagation formula for HGSMBs passing through a paraxial first-order optical system is derived based on the theory of coherence. Based on the derived formula, an application example showing the influence of spatial coherence on the propagation of beams is illustrated. It is found that the beam propagating properties of HGSMBs will be greatly affected by their spatial coherence. Our model provides a very convenient way for analyzing the propagation properties of partially coherent dark hollow beams.     

All-fiber wavelength- and mode-selective coupler for optical interconnections

We experimentally demonstrate a new wavelength- and mode-selective coupler utilizing intermodal coupling between a standard single-mode fiber (SMF) and a hollow optical fiber (HOF). The fabricated device routes optical signals such that a 1.3-microm signal is directed to the HOF port, adiabatically converting the LP(01) mode into a ring-shaped mode, which can be further connected to a gigabit ethernet link, reducing the differential mode-dispersion penalty. Optical signals near 1.5microm , meanwhile, stay in the LP(01) mode of the SMF arm for further connection to conventional wavelength-division multiplexing links based on erbium-doped fiber amplifiers. The performance of the device is characterized in terms of insertion loss, channel isolation, and mode-conversion efficiency.     

Hollow Gaussian beam generated by beam shaping with phase-only liquid crystal spatial light modulator

Based on the refractive beam shaping system, the transformation of a quasi-Gaussian beam into a dark hollow Gaussian beam by a phase-only liquid crystal spatial light modulator (LC-SLM) is proposed. According to the energy conservation and constant optical path principle, the phase distribution of the aspheric lens and the phase-only LC-SLM can modulate the wave-front properly to generate the hollow beam. The numerical simulation results indicate that, the dark hollow intensity distribution of the output shaped beam can be maintained well for a certain propagation distance during which the dark region will not decrease whereas the ideal hollow Gaussian beam will do. By designing the phase modulation profile, which loaded into the LC-SLM carefully, the experimental results indicate that the dark hollow intensity distribution of the output shaped beam can be maintained well even at a distance much more than 550 mm from the LC-SLM, which agree with the numerical simulation results.     

Generation of a hollow laser beam by a multimode fiber

A simple method to generate a hollow laser beam by multimode fiber is reported. A dark hollow laser beam is generated from a multimode fiber and the dependence of the output beam profile on the incident angle of laser beam is analyzed. The results show that this hollow laser beam can be used to trap and guide cold atoms.     

Diffraction-limited dark laser spot produced by a hollow optical fiber

By using the diffracted field of the LP(11) mode of a hollow-core optical fiber, we have produced a micrometer-sized, focused dark laser spot in the near field of the fiber. The minimum half-width of the dark spot is less than 1 mum . In particular, by masking the hollow core and metal coating the cladding with a microsphere, we blocked the light propagating in the cladding and obtained a clean dark spot, which may be useful in atom-optical experiments such as with atomic lenses, atom traps, and atom switches.     

可控双空心光束的理论方案及实验研究

提出了一种利用双周期弧向非满额相位调制的方法产生双空心光束的方案. 当准直氦氖激光通过1.5 mm半径透光孔照射到该相位图样时, 在200 mm成像透镜像空间获得长30 mm, 间距57.6μm, 单管束宽度0.11–0.14 mm的双空心光束. 该方案结构简单, 产生的双空心光束具有较好的可控性, 双光管间距由相位调制因子p决定, 能够实现从双空心光束到单空心光束的双向演化. 对所提出的方案进行了实验研究并得到与理论相符的结果. 利用多种组合方式讨论了将该方案拓展到蓝失谐光学囚禁势阱, 可以实现可控的空心双光阱、四光阱与光学晶格等, 有望在冷原子、冷分子囚禁与操控等领域的实验研究中发挥重要作用.     

Generations of dark hollow beams and their applications in laser cooling of atoms and all optical-type Bose－Einstein condensation

We report on a new experimental result to generate dark hollow beams by using a geometric optical method. We propose two new methods to produce focused and localized hollow laser beams by using π-phase plates. Using Monte-Carlo simulations, we have studied the Sisyphus cooling of alkali atoms in pyramidal hollow beam gravito-optical traps. We discuss some potential applications of the dark hollow beams in atom optics and the preparation of an all optically-cooled and optically-trapped atomic Bose－Einstein condensation (BEC). Our research shows that an ultracold atomic sample with a temperature of ～ 2μK can be obtained in the pyramidal hollow beam dipole trap and an all optical-type BEC may be realized in a far blue-detuned, hollow beam trap.     

暗中空光束的产生及应用

综述了几何光学、模式变换、光学全息、计算全息、横模选择、中空光纤等几种产生暗中空光束的方法,并简单介绍了暗中空光束在原子光学及其他领域的应用。     

内窥镜的红外激光传输用柔性空芯光纤的研制

通过理论计算确立了多功能介质-金属结构空芯光纤的结构参量,优化了液相镀膜法的有关条件,明确了具体制作参量。制作了以聚碳酸酯毛细管为基管的,高柔韧性的,可同时低损耗传输红外目标波长激光和可见导航光红外的空芯光纤。对光纤传输性能进行了测试。在2.94μm波长的Er∶YAG和0.63μm波长的红色半导体激光器的直线损耗分别为0.4 dB/m和3 dB/m。组装在医疗内窥镜中的柔性空芯光纤,在先端以0.9 cm半径135°角弯曲时,对Er∶YAG激光仍有近70%的传输效率;绿色导航光在内窥镜中的的损耗值为11 dB,绿色指示点在内窥镜的视窗中清晰可见。结果表明此种光纤在内窥镜的激光传输方面有重要的应用价值。     

空心光纤中LP01模的场分布

本文用弱导光纤近似分析了空心光纤LP01模的场分布,得出了色散方程,并进行了数值计算.     

Passive combination of multiple beams in an optical fiber via stimulated Brillouin scattering

We demonstrate passive combination of multiple beams in an optical fiber via stimulated Brillouin scattering (SBS). Four off-axis beams are combined in a long multimode optical fiber using a novel all-optical mount. The combined beam has the high spatial coherence properties of the LP(01) mode owing to the beam cleanup properties of SBS. The threshold for SBS when off-axis pumps are used is shown to be a factor of 13 times higher than for on-axis pump beams. We propose this method would improve the brightness of an array of fiber amplifiers.     

基于表面等离子体共振原理的空芯光纤传感器

设计了一种基于表面等离子体共振原理,使用空芯光纤作为光波导、外表面镀金属膜的光学材料圆柱体作为探头的新型折射率传感器。通过建立光学模型进行分析,在理论上推导出了这种传感器的传输光谱损耗公式,并针对该传感器在不同的光纤长度、探头材料、检测物质折射率等参数设置下的检测性能进行了分析,获得了各种参数对其性能的影响。由于该传感器可针对不同折射率的检测物质灵活地更换合适探头材料,相对于传统的表面等离子体共振光纤传感器,在易用性和性价比等方面具有更好的应用价值。     

单模光纤波导模的傍轴传输特性

将LP01模表示成用拉盖尔-高斯模线性叠加的形式,利用柯林斯公式推导出单模光纤波导模通过傍轴ABCD光学系统的解析传输公式。用所得的解析公式对LP01模在自由空间的传输和聚焦特性作了研究,并和高斯基模进行了比较。数值计算结果表明,用高斯基模描述LP01模会产生一定误差。LP01模经过透镜聚焦后存在焦移,且焦移随着菲涅尔数传输特性的减小而增大。选择合适的菲涅尔数聚焦后,LP01模会出现长焦深,这是与聚焦的高斯模所不同的。     

Generation of cylindrical vector beams in a mode-locked fiber laser using a mode-selective coupler

We experimentally obtain cylindrical vector beams(CVBs) in a passively mode-locked fiber laser based on nonlinear polarization rotation. A mode-selective coupler composed of both a single-mode fiber(SMF) and a twomode fiber(TMF) is incorporated into the cavity to act as a mode converter from LP01 mode to LP11 mode with broad spectral bandwidth. CVBs in different mode-locked states including single-pulse, multi-pulse, and bound pulse are obtained, for the first time to our best knowledge. The ultrafast CVBs with different operation states have potential applications in many fields such as laser beam machining, nanoparticle manipulation, and so on.