调控氧空位实现高比表面积Co_3O_4纳米片上的产氧反应（英文）

电催化水分解的速率控制步骤是水的氧化反应.高活性的电催化剂可加速水氧化的反应速率从而提升水分解反应的整体效果.我们通过水热-热解法制备了一种高活性的Co304催化剂去高效电催化产氧气.电镜表征证实了Co3O4具有超薄的纳米片层结构,X射线光电子能谱及电子顺磁共振波谱确认了Co304纳米片中存在大量氧空位.大幅提高的比表面积有利于更多包括作为活性点位的氧缺陷在内的点位暴露.Co304纳米片可加速阳极与电解质之间的产氧气反应,以很低的过电势(310 mV)及电流密度(10 mA/cm~2)高效催化产氧气,在1.0 mol/L KOH中表现出突出的稳定性.     

紫外激光调控CoFe2O4表面氧空位以增强析氧反应催化活性

本文以尖晶石型材料CoFe₂O₄为模型催化剂,研究证实脉冲紫外激光辐照可以有效调控材料表面的氧空位含量,进而改变其析氧催化活性,得到了催化活性随辐照时间的火山型变化趋势. 这种激光辐照方法可用于定量研究过渡金属化合物的表面阳离子价态、阴离子空位和物化性质间的关联.     

内嵌碳正八面体形貌Co3O4光催化活性研究

基于脱脂棉为牺牲模板,采用碳辅助法制备了内嵌碳的八面体形貌Co3O4,对其在模拟阳光下的光解水制氢气的能力进行了研究。X射线衍射（XRD）和扫描电镜（SEM）表征分析表明,制备的产物是具有规则正八面体形貌、粒径约为10 m的具有良好晶型的Co3O4。能谱（EDS）和光射线光电子能谱（XPS）结果表明,制备的产物内嵌无定形碳,碳源来自于脱脂棉制备过程中的不完全燃烧。实验结果表明制备的内嵌碳八面体形貌Co3O4具有良好的光解水制氢能力。     

内嵌碳正八面体形貌Co3O4光催化活性研究

基于脱脂棉为牺牲模板,采用碳辅助法制备了内嵌碳的八面体形貌Co3O4,对其在模拟阳光下的光解水制氢气的能力进行了研究。X射线衍射（XRD）和扫描电镜（SEM）表征分析表明,制备的产物是具有规则正八面体形貌、粒径约为10 m的具有良好晶型的Co3O4。能谱（EDS）和光射线光电子能谱（XPS）结果表明,制备的产物内嵌无定形碳,碳源来自于脱脂棉制备过程中的不完全燃烧。实验结果表明制备的内嵌碳八面体形貌Co3O4具有良好的光解水制氢能力。     

基于Co3O4修饰SnO2纳米纤维的高响应和高选择性乙醇气体传感器

SnO₂ nanofibers were synthesized by electrospinning and modified with Co₃O₄ via impregnation in this work. Chemical composition and morphology of the nanofibers were systematically characterized, and their gas sensing properties were investigated. Results showed that Co₃O₄ modification significantly enhanced the sensing performance of SnO₂ nanofibers to ethanol gas. For a sample with 1.2 mol% Co₃O₄, the response to 100 ppm ethanol was 38.0 at 300℃, about 6.7 times larger than that of SnO₂ nanofibers. In addition, the response/recovery time was also greatly reduced. A power-law dependence of the sensor response on the ethanol concentration as well as excellent ethanol selectivity was observed for the Co₃O₄/SnO₂ sensor. The enhanced ethanol sensing performance may be attributed to the formation of p-n heterojunctions between the two oxides.     

焙烧温度对SiO2负载的Co3O4纳米粒子表面氧缺陷浓度和CO氧化催化性能的影响

以传统的浸渍法,在不同焙烧温度下制备了用于CO氧化反应的Co₃O₄/SiO₂催化剂．通过激光拉曼光谱(Raman)、X射线光电子能谱(XPS)、X射线衍射(XRD)、程序升温还原(TPR)和X射线吸收精细结构谱(XAFS)表征了该系列催化剂的结构．在所有的催化剂中,XRD和Raman光谱都只检测到了Co₃O₄晶相的存在．与Co₃O₄体相相比,XPS结果表明在200 oC焙烧的(Co₃O₄(200)/SiO₂)催化剂中Co₃O₄表面上存在着过量的Co²⁺．与XPS的结果一致,TPR结果表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄表面上存在氧缺陷, 并且XAFS结果也表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄具有更多的Co²⁺．提高焙烧温度使得过量的Co²⁺进一步氧化为Co³⁺,同时降低了表面氧缺陷浓度,从而得到计量比的Co₃O₄4/SiO₂催化剂．在所有的负载催化剂中Co₃O₄(200)/SiO₂催化剂表现出了最好的CO氧化催化性能,表明过量Co²⁺和表面氧缺陷的存在能够促进Co₃O₄催化CO氧化反应的活性.     

高比表面积TiO2与g-C3N4复合材料的光催化性能及机理研究

本文通过简单的溶剂热法制备了g-C₃N₄与高比表面积的TiO₂复合材料,该方法操作简单且能耗低. 甲基橙降解实验结果表明,高比表面积的TiO₂有效提高了光催化活性. 光电化学测试结果表明,与g-C₃N₄复合后,TiO₂的电荷载流子迁移速率得到明显改善. g-C₃N₄/高比表面积-TiO₂的光催化活性很强,在100分钟内,6%-g-C₃N₄/高比表面积-TiO₂对甲基橙的降解程度可达92.44%. 6%-g-C₃N₄/高比表面积-TiO₂不仅具有良好的光催化降解性能,还具有较高的稳定性. 本文对6%-g-C₃N₄/高比表面积-TiO₂的光催化机理也进行了系统的研究.     

Synthesis and properties of Au-Fe3O4 and Ag-Fe3O4 heterodimeric nanoparticles

Monodisperse Au-Fe 3 O 4 heterodimeric nanoparticles (NPs) were prepared by injecting precursors into a hot reaction solution.The size of Au and Fe 3 O 4 particles can be controlled by changing the injection temperature.UV-Vis spectra show that the surface plasma resonance band of Au-Fe 3 O 4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size.The as-prepared heterodimeric Au-Fe 3 O 4 NPs exhibited superparamagnetic properties at room temperature.The Ag-Fe 3 O 4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO 3 as precursor instead of HAuCl 4.It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs.     

Fe3O4磁性纳米颗粒的催化性能研究进展

综述了国内外这一领域科研工作者的研究成果,以紫外光谱（UV）和电化学传感器为主要手段阐述了Fe₃O₄MNPs对H₂O₂的催化作用并对Fe₃O₄MNPs利用其催化性质在H₂O₂的检测领域的进一步发展和应用进行了展望。     

Low-field magnetization of ludwigites Co3O2BO3 and Co3 ? xFexO2BO3 (x ≈ 0.14)

Ludwigite single crystals of compositions Co₃O₂BO₃ and Co_{3 − x} Fe _x O₂BO₃ (x ≈ 0.14) have been synthesized. The crystal structure is investigated at room temperature, and the magnetization is studied in the temperature range T = 4.2–100 K in magnetic fields of up to 600 Oe. The orthorhombic symmetry is revealed, and the unit cell parameters are determined. A number of features are established for the temperature dependence of the magnetization. In unsubstituted Co₃O₂BO₃, two magnetic transitions are found at T _C1 = 43 K and T _C2 = 15 K. At temperatures below 40 K, spin-glass state is revealed. Substitution of iron ions for cobalt ions leads to a noticeable shift in the magnetic transitions toward the high-temperature range: T _C1 = 83 K and T _C2 = 74 K. A ferromagnetic ordering of the P type is found in the Co_{3 − x} Fe _x O₂BO₃ (x ≈ 0.14) compound. Original Russian Text ? N.V. Kazak, N.B. Ivanova, V.V. Rudenko, A.D. Vasil’ev, D.A. Velikanov, S.G. Ovchinnikov, 2009, published in Fizika Tverdogo Tela, 2009, Vol. 51, No. 5, pp. 916–919.     

Facile method to prepare stable superhydrophobic Co3O4 surface

A facile and novel method was developed to fabricate rough Co₃O₄ surface with hierarchical micro- and nanostructures by the combination of simple solid state reactions and coating process. After modification with stearic acid, a superhydrophobic surface with water contact angle of 155 ± 1.8° and sliding angle of 2° was obtained. The superhydrophobic Co₃O₄ surface remained superhydrophobic property in a wide pH range from 3 to 14. The superhydrophobic Co₃O₄ surface also showed excellent self-cleaning property and high stability in ambient environments.     

径向生长的具有分级结构的四氧化三钴微晶及其在气体传感上的应用

通过在水热合成后追加退火处理,制备了径向生长的具有分级结构的树枝状三维Co₃O₄晶体,并用X射线衍射仪、扫描电子显微镜和透射电子显微镜对其结构和形貌进行了表征. 在110 oC对其气体探测性能的研究表明这种Co₃O₄分级结构对氨气有较高的探测灵敏度和响应速度(10 s),性能稳定并具有可重复性. 同时,还在较低的探测温度下对酒精、丙酮和苯进行了气敏探测.     

Neutron powder diffraction and magnetic studies of mesoporous Co3O4

Samples of mesoporous Co₃O₄, created by using mesoporous silicas KIT-6 and SBA-16 as hard templates to control the growth of Co₃O₄ have been investigated with SQUID magnetometry and neutron powder diffraction, to reveal the effects of high surface area on the magnetic and electronic properties. DC magnetic susceptibility measurements show lower Néel ordering temperatures and lower magnetic moments than in a “bulk” reference. A lower second transition temperature is also observed in the mesoporous samples, associated with the freezing of the surface (shell) magnetic moments. Measurements taken with increasing applied field at constant temperature show the materials to be antiferromagnetic as expected. Complementary parametric neutron powder diffraction studies show similar trends between the two mesoporous samples when looking at their Néel temperatures, and verify long range order within the samples.     

Catalytic performance of Mn3O4 and Co3O4 nanocrystals prepared by sonochemical method in epoxidation of styrene and cyclooctene

A simple sonochemical method was developed to synthesis uniform sphere-like Co₃O₄ and Mn₃O₄ nanocrystals. Epoxidation of styrene and cyclooctene by anhydrous tert-butyl hydroperoxide over the prepared Co₃O₄ and Mn₃O₄ nanocatalysts was investigated. The results of conversion activity were compared with bulk Co₃O₄ and Mn₃O₄. Under optimized reaction conditions, the nanocatalysts showed a superior catalytic performance as compared to the bulk catalysts. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and BET surface area, were used to characterize and investigate the nanocatalysts.     

Synthesis of urchin-like Co3O4 hierarchical micro/nanostructures and their photocatalytic activity

Urchin-like Co₃O₄ hierarchical micro/nanostructures have been successfully synthesized by calcining urchin-like precursor CoCO₃, which are prepared by a facile hydrothermal route. The particle size of the urchin-like Co₃O₄ could be easily controlled by altering the calcination temperature. The morphology and structure of the as-prepared urchin-like products were characterized by XRD, FESEM and TEM. Photocatalytic measurement demonstrates that these urchin-like Co₃O₄ micro/nanostructures show good photocatalytic effect and their degradation efficiency is strongly dependent on their particle size. Furthermore, a plausible reaction mechanism is also proposed to illustrate the photocatalytic processes of Co₃O₄.     

Charge-discharge characteristics of nanocrystalline Co3O4 powders via aerosol flame synthesis

Nanocrystalline Co₃O₄ powders were synthesized by aerosol flame synthesis (AFS) method for the anode of lithium ion batteries and the basic electrochemical properties were investigated. The effects of synthesis conditions and heat-treatment temperature on the morphology, crystallite size and electrochemical properties were investigated. As-prepared soot contained Co₃O₄, CoO and Co(OH)₂, which were eventually converted into cubic spinel Co₃O₄ by post heat treatment. The as-prepared particle size was in the range of 10-30 nm and grew to 50-85 nm by the heat treatment. With growing particle size and improved crystallinity, charge-discharge capacity and cycle performance were improved and the discharge capacity of the powder heat-treated at 700 °C was 571 mAh/g after 30 cycles, which was better than Co₃O₄ powder reported in the previous literature.     

Non-equilibrium effects in the magnetic behavior of Co3O4 nanoparticles

We report detailed studies of the non-equilibrium magnetic behavior of antiferromagnetic Co₃O₄ nanoparticles. The temperature and field dependence of magnetization, wait time dependence of magnetic relaxation (aging), memory effects, and temperature dependence of specific heat have been investigated to understand the magnetic behavior of these particles. We find that the system shows some features that are characteristic of nanoparticle magnetism such as bifurcation of field-cooled (FC) and zero-field-cooled (ZFC) susceptibilities and a slow relaxation of magnetization. However, strangely, the temperature at which the ZFC magnetization peaks coincides with the bifurcation temperature and does not shift on application of magnetic fields up to 1 kOe, unlike most other nanoparticle systems. Aging effects in these particles are negligible in both FC and ZFC protocols, and memory effects are present only in the FC protocol. We show that Co₃O₄ nanoparticles constitute a unique antiferromagnetic system which enters into a blocked state above the average Néel temperature.     

三维海胆状Co3O4的微纳结构制备及锂电池性能

水热法制备的合成海胆状Co₃O₄前驱物在空气中退火得到三维海胆状Co₃O₄的微纳结构. 采用FESEM、TEM、HRTEM以及XRD对产物进行形貌和结构的表征. 结果表明,合成的海胆状结构Co₃O₄由许多粒径约为15 nm的颗粒串接形成. 锂电池测试性能表明,制备的海胆状Co₃O₄首次放电容量达到1.369 Ah/g,经过20次循环