Thermodynamic investigations of ternary o-toluidine + tetrahydropyran + N,N-dimethylformamide mixture and its binaries at 298.15, 303.15 and 308.15 K

The densities ρ, speed of sound u, data of o-toluidine (i) + tetrahydropyran (j) + N,N-dimethylformamide (k) and its {tetrahydropyran (j) + N,N-dimethylformamide (k); o-toluidine (i) + N,N-dimethylformamide (k)} binaries have been measured as a function of composition at 298.15, 303.15 and 308.15 K. The excess molar enthalpies, H^E data of same set of binary mixtures have also been measured over entire composition at 308.15 K. The densities and speeds of sound data of binary and ternary mixtures have been utilized to determine their excess molar volumes, V^E and excess isentropic compressibilities, κ_S^E. The observed thermodynamic properties of binary and ternary mixtures have been analyzed in terms of Graph theory. It has been observed that Graph theory correctly predicts the sign as well as magnitude of thermodynamic properties.     

Thermophysical properties of binary mixtures (dimethyl carbonate + ketones) at T = (303.15, 308.15 and 313.15) K

The densities ρ, viscosities η, and refractive indices n_D of binary mixtures of dimethyl carbonate (DMC) with acetophenone, cyclopentanone, cyclohexanone, and 3-pentanone have been measured over the entire range of composition at the temperatures 303.15, 308.15 and 313.15 K and at atmospheric pressure. The density values were used to calculate excess molar volumes V^E, and other excess functions of interest such as deviations in viscosity Δη, excess Gibb's free energies of activation of viscous flow ΔG^E and deviations in molar refraction ΔR. The measured viscosities were compared with those predicted using the Grunberg-Nissan, Eyring-Margules, Soliman-Marshall, and McAllister four body models. Furthermore the refractive indices data have been correlated using Lorentz-Lorentz, Weiner, Newton, Gladstone-Dale, Eykman, and Eyring-John equations and a satisfactory agreement was found for all the binary systems studied in the present work.     

Volumetric, acoustic and spectroscopic studies for binary mixtures of ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) with alkoxyalkanols at T = (288.15 to 318.15) K

Densities and speeds of sound have been measured for the binary mixtures of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆] with ethylene glycol monoethyl ether (EGMEE), diethylene glycol monoethyl ether (Di-EGMEE), triethylene glycol monoethyl ether (Tri-EGMEE) over the whole composition range at atmospheric pressure. Experimental densities have been used to estimate excess molar volumes, V^E. Changes in isentropic compressibility, Δκ_s have been estimated by using experimental speed of sound and density values. Excess properties were fitted to the Redlich-Kister polynomial equation to obtain the binary coefficients and the standard errors. The molecular scale interactions between ionic liquid and alkoxyalkanols have been investigated through ¹H NMR spectroscopy. NMR chemical shifts for hydroxyl group of alkoxyalkanols and their deviations show hydrogen bonding interactions of varying strengths between ionic liquid and alkoxyalkanol in their binary mixtures.     

Quasiclassical studies of Eley-Rideal and hot-atom reactions on a surface at 94 K: H(D) → D(H) + Cu(1 1 1)

Reactions and reaction dynamics of gas-phase H(or D) atoms with D(or H) atoms adsorbed onto a Cu(1 1 1) surface have been investigated by the quasi-classical molecular dynamics method. To simulate the H(D) → D(H) + Cu(1 1 1) system at a 94 K surface temperature, D(or H) adsorbates were disseminated arbitrarily on the surface of Cu(1 1 1) to form 0.50, 0.28 and 0.18 ML of coverages. The interaction of hydrogen atoms and the surface system is worked out by an LEPS function. LEPS parameters have been determined by using the total energy values which were calculated by a density functional theory (DFT) method and the generalized gradient approximation (GGA) for the exchange-correlation energy for various configurations of one and two hydrogen atoms on the Cu(1 1 1) surface. The Cu(1 1 1) surface, imitated by an embedded-atom method which is a many-body potential parameterized by Voter-Chen, is formed as a multilayer slab. The slab atoms are permitted to move. Various processes, trapping onto the surface, inelastic reflection of the incident projectile and penetration of the adsorbate or projectile atom into the slab, are examined. The dependence of these mechanisms on isotopic replacement has also been analyzed. Considerable contributions of the hot-atom pathways for the product formations are consequently observed. The rate of subsurface penetrations is obtained to be larger than the sticking rate onto the surface.     

Photodissociation of a HCl molecule adsorbed on ice at T = 210 K

This theoretical work concerns the study of the photodissociation of a HCl molecule adsorbed on an ice surface at T = 210 K. Temperature induced disorder is taken into account by a statistics over several configurations extracted from a classical molecular dynamics (MD) simulation. For each configuration, 3D quantum dynamics of the hydrogen photofragment is investigated using the multi-configuration time-dependent Hartree (MCTDH) method. The absorption spectrum at 210 K is obtained by an average over the spectra calculated for each configuration. The surface disorder results in a smoothing of the interferences structures that appear for some given orientations of HCl depending on the surrounding water molecules orientations.     

Discrimination of individual atoms on Ge/Si(1 1 1)-(7 × 7) intermixed surface

We have discriminated individual Ge atoms from the intermixed Ge/Si(1 1 1)-(7 × 7) surface using a non-contact atomic force microscope at a room temperature environment. In fact, Si-Ge (IV-IV) binary system is considered as one of the most difficult systems for atomic discrimination among atoms in the IV group because of the similarities in the electronic and chemical properties. However, in this study, we found one of the most attractive tools to discriminate a specific atom from the others even in the difficult Si-Ge system. Ge atoms are shown as dim spots in comparison to Si atoms with bright spots on the intermixed surface by a weak chemical bonding energy and/or a relaxation effect despite large atomic radius and high spatial position in both variable frequency shift and topographic images. The discrimination of individual atoms with respect to the chemical interaction variation will further provide a chance to manipulate different atomic species and assemble various nanostructures in near future.     

Structure of the oxidized 4H-SiC(0 0 0 1)-3 × 3 surface

We have determined the structure of the 4H-SiC(0 0 0 1)-3 × 3 surface after exposure to small amounts of molecular oxygen at room temperature using surface X-ray diffraction. The 3 × 3 reconstruction remains until at least an exposure of 10,000 L, but the diffracted intensities change, indicating structural changes. Comparison of the Patterson maps of the clean and oxidized surface shows that the main changes occur at the Si tetramer on top of the 3 × 3 surface. Atomic positions for several models were fitted to the experimental data. A model in which oxygen atoms are inserted into the Si tetramer gives the best fit to the experimental data. The best-fit atomic positions agree well with those obtained using density functional calculations.     

Small Cu-clusters on ZnO(0 0 0 1)-Zn: Nucleation and annealing behavior

The formation of (1 1 1)-oriented Cu-clusters on ZnO(0 0 0 1)-Zn at room temperature is followed by in situ applied scanning tunneling microscopy. Kink-sites at step edges and especially the apexes of triangular ZnO-substrate terraces act as preferred nucleation sites. At room temperature the decay of small Cu-islands takes place on a time scale of minutes. Larger Cu-coverages lead to an ensemble of interconnected 3D-islands of uniform height separated by trenches down to the substrate. A disordered dislocation network is visible on top of the Cu-islands. Annealing leads to a piling up of the Cu-islands. An initially undisturbed ZnO-substrate in between the islands shows that there is no strong reaction between the Cu-clusters and the oxide at room temperature. A strong decrease of the adlayer coverage visible above the ZnO-substrate layer for annealing temperature above 570 K points to a partial entrenching of the islands into the oxide support and an alloy formation.     

Growth and morphology of the epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) Trilayers

Growth and surface morphology of epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) trilayers constituting a magnetic tunnel junction were investigated by low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM). STM reveals a grain-like growth mode of MgO on Fe(1 1 0) resulting in dense MgO(1 1 1) films at room temperature as well as at 250 °C. As observed by STM, initial deposition of MgO leads to a partial oxidation of the Fe(1 1 0) surface which is confirmed by Auger electron spectroscopy. The top Fe layer deposited on MgO(1 1 1) at room temperature is relatively rough consisting of clusters which can be transformed by annealing to an atomically flat epitaxial Fe(1 1 0) film.     

Adsorption, ordering, and chemistry of nitrobenzene on Si(1 0 0)-2 × 1

Surface chemistry of nitrobenzene on Si(1 0 0)-2 × 1 has been investigated using multiple internal reflection Fourier-transform infrared spectroscopy (MIR-FTIR), Auger electron spectroscopy (AES) and thermal desorption mass spectrometry. Molecular adsorption of nitrobenzene at submonolayer coverages is dominating at cryogenic temperatures (100 K). As the surface temperature is increased to 160 K, chemical reaction involving nitro group occurs, while the phenyl entity remains intact. Thus, a barrier of approximately 40.8 kJ/mol is established for the interaction of the nitro group of nitrobenzene with the Si(1 0 0)-2 × 1 surface. Further annealing of the silicon surface leads to the decomposition of nitrobenzene. The concentration of nitrogen and oxygen remains constant on a surface within the temperature interval studied here. AES studies also suggest that the majority of carbon-containing products remain bound to the surface at temperatures as high as 1000 K. The only chemical reaction leading to the release of the gaseous products is benzene formation around 670 K. The amount of benzene accounts only for a few percent of the surface species, while the rest of the phenyl groups connected to the silicon surface via a nitrogen linker remain stable even at elevated temperatures, opening an opportunity for stable surface coatings.     

Fourfold in-plane magnetic anisotropy in epitaxial Fe(1 1 0)/Cu(0 0 1) and Fe(1 1 0)/Ni(0 0 1) bilayers

Epitaxial Fe(1 1 0) films with thicknesses of 100-800 nm on Cu(0 0 1) and Ni(0 0 1) buffer layers grown on MgO(0 0 1) substrates have been fabricated. These films contain Fe(1 1 0) crystallites which are in the Pitsch orientation relationship. Magnetization and the fourfold in-plane magnetic anisotropy constants of these films have been determined by torque measurements. All the samples under study are characterized by a fourfold magnetic anisotropy with easy axes parallel to the [1 0 0] and [0 1 0] directions of Cu(0 0 1) and Ni(0 0 1) layers. The measured values of the constant for Fe(1 1 0)/Cu(0 0 1) are found to depend on deposition temperature; a maximum value of (2.5±0.1)×10⁵ erg/cm³ is reached after annealing at 600 °С. The in-plane torque measurements on Fe(1 1 0)/Ni(0 0 1) bilayers obtained at 300 °С, on the other hand, exhibit a constant value of (2.7±0.1)×10⁵ erg/cm³. Assuming an exchange interaction between the Fe(1 1 0) crystallites, which are in the Pitsch orientation relationship, the fourfold in-plane magnetic anisotropy has been calculated as 2.8×10⁵ erg/cm³. The deviations of the experimental values from the predicted one may be explained by the formation of a polycrystalline phase within the Fe(1 1 0) layer and a partial disorientation of the epitaxial crystallites.     

The thermodesorption mechanism of ammonia from Ru(0 0 0 1)

Thermodesorption rates for the desorption of ammonia from Ru(0 0 0 1) are calculated by Transition State Theory including small curvature tunneling corrections. The potential energy surface is derived on a model cluster employing hybrid density functional theory (B3LYP). Two desorption pathways can be identified, just distinguished by the orientation of the leaving ammonia entity. It is found that the rate dominating mechanism comprises an umbrella-like flipping movement of the hydrogen atoms during the desorption. Nevertheless tunneling does not play any significant role in the reaction as the hydrogen movements are shown to occur at the low energy regions of the barrier.     

Search for adsorption potential energy minima of NO on Pt(9 9 7) at 11 K

We observed four kinds of adsorbed NO molecules on Pt(9 9 7) at 11 K using infrared reflection absorption spectroscopy (IRAS). The peaks at 1690, 1484 and 1615 cm⁻¹ are assigned to the N-O stretching modes of the on-top site and the hollow site on the terrace and the bridge site at the step, respectively. The 1385 cm⁻¹ peak is observed below ∼70 K. We assign the 1385 cm⁻¹ peak to the hollow site of the (1 1 1) microfacet at the step or the lower-terrace hollow site nearest to the step. By heating, site-to-site hopping to the more stable site occurs and the relative stability of four adsorption sites can be determined.     

Lineshape analysis of the J = 3 ← 2 and J = 5 ← 4 rotational transitions of room temperature CO broadened by N2, O2, CO2 and noble gases

Collisional relaxation has been considered for millimeter lines of carbon monoxide at room temperature. Accurate measurements of carbon dioxide- and rare gases-broadened widths have been performed on the J = 3 ← 2 rotational line of ¹²CO by using a video-type spectrometer. Measurements of nitrogen-, oxygen-, and xenon-broadened widths of the J = 5 ← 4 rotational line of ¹³CO were also carried by using a frequency-modulated spectrometer. A lineshape study performed on all the investigated binary systems provide confirmation that Voigt profile is not a suitable model to analyse experimental lines in the millimeter-waves region. On one hand, using this profile in the low pressure range, i.e. in the Doppler regime, the retrieved collisional linewidths do not follow a linear variation with the perturbing gas pressure. On the other hand, regardless of the pressure, lineshapes exhibit a narrowed profile. An accurate analysis of the pressure dependence of relaxation rates show that the Galatry profile is not appropriate and that experimental lineshapes are actually Speed Dependent Voigt profiles. Accurate broadening parameters were retrieved from this profile and compared to previous reported values and predictions calculated from the Robert-Bonamy formalism. Finally a variation of the ratio of relaxation speed dependence to broadening parameters versus relative masses of the collision partners is presented.     

Ruthenium adsorption and diffusion on the GaN(0 0 0 1) surface

We report first principles calculations to analyze the ruthenium adsorption and diffusion on GaN(0 0 0 1) surface in a 2×2geometry. The calculations were performed using the generalized gradient approximation (GGA) with ultrasoft pseudopotential within the density functional theory (DFT). The surface is modeled using the repeated slabs approach. To study the most favorable ruthenium adsorption model we considered T₁, T₄ and H₃ special sites. We find that the most energetically favorable structure corresponds to the Ru- T₄ model or the ruthenium adatom located at the T₄ site, while the ruthenium adsorption on top of a gallium atom (T₁ position) is totally unfavorable. The ruthenium diffusion on surface shows an energy barrier of 0.612 eV. The resultant reconstruction of the ruthenium adsorption on GaN(0 0 0 1)- 2×2 surface presents a lateral relaxation of some hundredth of Å in the most stable site. The comparison of the density of states and band structure of the GaN(0 0 0 1) surface without ruthenium adatom and with ruthenium adatom is analyzed in detail.     

Significance of the HO2 + CO reaction during the combustion of CO + H2 mixtures at high pressures

This paper constitutes an experimental and numerical study, using uncertainty analysis of the most important parameters, to evaluate the mechanism for the combustion of CO + H₂ mixtures at high pressures in the range 15-50 bar and temperatures from 950 to 1100 K. Experiments were performed in a rapid compression machine. Autoignition delays were measured for stoichiometric compositions of CO + H₂ containing between 0 and 80% CO in the total fuel mixture. The experimental results showed an unequivocal monotonic increase as the proportion of CO in the mixture was raised. Comparisons were made also with the measured ignition delays in mixtures of H₂ with increasing dilution by N₂, corresponding to the proportions of CO present. These times also increased monotonically, albeit with a greater sensitivity to the extent of dilution than those measured in the CO + H₂ mixtures. By contrast, numerical simulations for the same mixtures, based on a kinetic model derived by Davis et al. displayed a qualitative discrepancy as there was virtually no sensitivity of the ignition delay to the changing ratio of CO + H₂, certainly up to 80% replacement. No exceptions to this trend were found, despite tests being made using seven other kinetic models for CO + H₂ combustion. Global uncertainty analyses were then applied to the Davis et al. model in order to trace the origins of this discrepancy. The analyses took into account the uncertainties in all rate parameters in the model, which is a pre-requisite for evaluation against ignition delay data. It is shown that the reaction rate constant recommended by Baulch et al. for the HO₂ + CO reaction, at T ∼ 1000 K, could be up to a factor of 10 too high and that lowering this rate corrected the qualitative anomaly between experiment and numerical prediction.     

Electronic structure study of reconstructed Au-SiC(0 0 0 1) surfaces

A study of surface and interface properties of reconstructed Au-SiC(0 0 0 1) surfaces is reported. Two reconstructions were prepared on SiC(0 0 0 1), a √3 × √3R30° and a Si-rich 3 × 3, before Au deposition and subsequent annealing at different temperatures. For the Si-rich 3 × 3 surface the existence of three stable reconstructions 2√3 × 2√3R30°, 3 × 3 and 5 × 5 are revealed after deposition of Au layers, 4-8 Å thick, and annealing at progressively higher temperatures between 500 and 950 °C. For the 2√3 surface two surface shifted Si 2p components are revealed and the Au 4f spectra clearly indicate silicide formation. The variation in relative intensity for the different core level components with photon energy suggests formation of an ordered silicide layer with some excess Si on top. Similar core level spectra and variations in relative intensity with photon energy are obtained for the 3 × 3 and 5 × 5 phases but the amount of excess Si on top is observed to be smaller and an additional weak Si 2p component becomes discernable.For the √3 surface the evolution of the core level spectra after Au deposition and annealing is shown to be distinctly different than for the Si-rich 3 × 3 surface and only one stable reconstruction, a 3 × 3 phase, is observed at similar annealing temperatures.     

Co growth on Si(0 0 1) and Si(1 1 1) surfaces: Interfacial interaction and growth dynamics

In situ X-ray photoelectron spectroscopy (XPS) and ex situ atomic force microscopy (AFM) were used to study the growth of thin cobalt films at room temperature (RT) on both clean and H-terminated Si(0 0 1) and Si(1 1 1) surfaces. The growth proceeds by first forming an initial CoSi₂-like phase at the growth front of the Si substrate. With increasing Co coverage the interfacial layer composition becomes richer in Co and eventually a metallic Co film is formed on top. Hydrogen termination of the Si surface did not suppress the reaction of Co and Si. A pseudo-layer-by-layer growth mode is proposed to describe the growth of Co on H-terminated Si surfaces, while closed-packed small island growth occurs on clean Si surfaces. The difference in growth mode can be attributed to the increase in the surface mobility of Co adatoms in the presence of hydrogen.     

Enhanced reactivity and selectivity in oxidation of Cu(1 0 0) and α-Cu-Al(5 at.%)(1 0 0) surfaces studied by electron and ion spectroscopies

In this study we investigate the influence of alloying on the reactivity and bonding of oxygen on α-Cu-Al(5 at.%)(1 0 0) oriented single crystal surfaces by X-ray photoelectron spectroscopy (XPS), ultra-violet spectroscopy (UPS) and low energy ion scattering (LEIS) spectroscopy, at room temperature. It was found that alloying results in an enhanced reactivity of both Cu and Al sites in comparison with the pure metals. According to adsorption curves calculated from XPS, saturation of the alloy surface occurs for exposures of ∼15 L. At saturation the total amount of adsorbed oxygen is similar for the alloy and pure copper surfaces. It was determined that first mostly Al sites are oxidized, followed by simultaneous oxidation of Cu and Al sites. At saturation the amount of oxygen bonded to Cu sites is ∼1.7 larger then that bonded to Al sites. From a comparison of the XPS and LEIS data analysis as a function of oxygen exposure it was found that oxidation of α-Cu-Al(5 at.%)(1 0 0) alloy is a multi-stage process with fast and slow stages. These stages involve an interplay of chemisorption, sub-surface diffusion of oxygen and Al segregation. UPS measurements show an increase in the work function of the alloy surface with oxygen adsorption. This is a contrast to pure Cu surfaces where the work function decreases at the initial stages of oxidation followed by an increase with oxygen exposure. Annealing to 400 °C drives the oxidized alloy surface into its thermodynamic state resulting in the formation of an aluminum oxide layer. Possible mechanisms to explain the enhanced reactivity of the alloy surface compared to that of pure copper are suggested and discussed.