宏观因素影响下的系统中元件重要性研究

为研究复杂系统在工作环境中其组成元件对系统安全运行的重要性,将汪培庄先生的因素空间理论与笔者提出的空间事故树理论相结合,构造了一套元件重要性研究方法.构建系统T={U,C,D},将元件作为研究对象集合U,系统工作的宏观环境作为因素集C,元件重要性排序集作为D.对宏观环境中的工作时间a1和温度a_2进行划分形成不同的状态区域S_q,计算在S_q中元件xj的失效权重γ(AS_q(x_j))和在S_q中系统T的失效权重δ(AS_q(T))),从而得到x_j在S状态下的等效失效权重Z(AS_q(x_j)),研究状态S_q下的原件重要性排序D_η,及元件x_j失效性对a_1及a_2的敏感性.使用一个实际的电气系统维修情况统计资料,使用上述方法进行了研究,结果表明:不同工作环境下元件对系统的重要程度是不同的.元件对温度和使用时间是敏感的,并得到了在10³0°且5030°且50⁷5d环境下工作系统可靠性是最高的结论.在给定工作环境下,重要性大的元件多储备,重要性小的元件少储备,以满足系统维修需要,并指导实际工程.     

On the comparison between the APV and the NPV computed via the WACC

The valuation of levered investment in the practice is made with the WACC approach, even if the superior technique of the APV is available. The paper shows that the APV can be interpreted as the arbitrage free value of the portfolio made by an investment and a supporting loan. Therefore the WACC evaluation, generally different from the APV, allows for arbitrage. We provide various conditions which completely characterize the sign of the error as a functions of all the variables entering the model.     

Investigation of the nonuniform distribution of the elastic and strength characteristics over the cross section of the diaphysis of the human tibia

The elastic, deformation, and strength properties of six different zones of the cross section of the diaphysis of the human tibia have been experimentally investigated. It is shown that when the compact bone tissue is stressed in tension all these properties differ significantly from zone to zone. The greatest values of the initial modulus of elasticity and the tensile strength correspond to the frontal-outer zones of the bone. The nonlinear stress-strain curves are analytically approximated. The secant and tangent moduli are shown to depend on the stress intensity.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 5, pp. 940–946, September–October, 1971.     

On the algorithm of the solution of the signorini problem

An algorithm is proposed for solving the Signorini problem /1/ in the formulation of a unilateral variational problem for the boundary functional in the zone of possible contact /2/. The algorithm is based on a dual formulation of Lagrange maximin problems for whose solution a decomposition approach is used in the following sense: a Ritz process in the basis functions that satisfy the linear constraint of the problem, the differential equation in the domain, is used in solving the minimum problem (with fixed Lagrange multipliers); the maximum problem is solved by the method of descent (a generalization of the Frank-Wolf method) under convexity constraints on the Lagrange multipliers. The algorithm constructed can be conisidered as a modification of the well-known algorithm to find the Udzawa-Arrow-Hurwitz saddle points /3, 4/. The convergence of the algorithm is investigated. A numerical analysis of the algorithm is performed in the example of a classical contact problem about the insertion of a stamp in an elastic half-plane under approximation of the contact boundary by isoparametric boundary elements. The comparative efficiency of the algorithm is associated with the reduction in the dimensionality of the boundary value problem being solved and the possibility of utilizing the calculation apparatus of the method of boundary elements to realize the solution.     

The numerical analysis of the influence of the blankholder force and the friction coefficient on the value of the drawing force

In this paper the numerical analysis of the drawing process with the blankholder is presented. The influence of the value of the blankholder force on the value of the drawing force and drawpiece height is examined. A different friction coefficient of the sheet metal for die and blankholder is considered. A defect at the lack of the blankholder is presented. The analysis in the system ANSYS/LS-DYNA is passed. The material model with the mixed hardening, isotropic and isothermal is used. Technological parameters of the sheet-metal to drawing, the die, the stamp and the blankholder from the literatures are chosen. Examples results of computer simulations are presented. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

On the relation between the singular and the weak coupling limits

After having recalled some definitions concerning quantum stochastic processes and, in particular, quantum Brownian motions, a general scheme is introduced which allows a unified approach to the weak coupling and singular coupling limits. The analogies and differences between the two are discussed. The main difference consists of the fact that, in the singular coupling limit, the use of a Hamiltonian unbounded below seems to be unavoidable, while this is not the case for the weak coupling limit.     

Applying the Zigbee technology for the enhancing the remote objects control

The paper presents the monitoring and measurement processes for the remote object vibration in the plain space. Wireless, RF communication in Tx/Rx duplex mode provides transfer of data with ZigBee transceivers. Presented ZigBee technology operates in many various modes on frequency 2.4 GHz allowing the coordinator node to select certain path and data. ZigBee technology can be alternative for other vibration research techniques. The vibration displacement is processed further by DSP Digital Signal Processing, made with the microcontroller. Accelerometer applications due to embedded control and I/O digital signal processor DSP play the crucial role in determining vibration and machines fatigue strength testing. It registers, among other, the temporary industrial parameters and monitors plant system parameters such as vibration and/or pressure. The paper presents diagnostic procedure and measurements process of the vibration in the plain space. Role of the node play ZigBee transceivers. (© 2009 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

3E系统协调发展的PLSPM-GIA测度模型及其应用研究

在总结协调发展水平测算时应该注意的一些问题的基础上,提出建立PLSPM-GIA模型对3E系统协调发展水平进行估算。首先设计3E系统综合发展指标体系,运用PLS路径模型对中国1996-2014年的各系统的综合发展水平进行了计算,然后利用灰色关联模型度量了系统协调度,最后综合考虑系统的发展水平和协调水平,得出系统的协调发展水平。研究表明:①PLSPM-GIA模型能够弥补现有方法的缺陷,而且适用于系统协调发展水平的测度;②从发展水平来看,由高到低依次为经济子系统、能源子系统和环境子系统;③从系统的协调度来看,2005年之前能源经济子系统和能源环境子系统的协调度先上升后缓慢下降,由于受到经济环境子系统协调度缓慢下降的影响,3E系统协调度呈缓慢下降态势,2005年以后3E系统及其子系统的协调度下降趋势明显;④从协调发展水平来看,目前除经济环境子系统外,3E系统和其他子系统均处于轻度失调状态。     

用常微分方程模型分析预防和隔离措施对SARS发病率的影响

通过建立常微分方程模型 ,分析了预防和隔离措施对 SARS发病率的影响 ,并把计算结果与实际统计数据进行了比较 ,结果表明 ,及时高效的预防和隔离措施能够有效地控制 SARS的传播 .     

On the maximum deviation between the histogram and the underlying density

Summary The limiting joint distribution of the location and size of the maximum deviation between the historgram and the underlying density is derived. For smooth densities, the location and size of the maximum are asymptotically independent. The size has a limiting double-exponential distribution and the location has a limiting normal distribution.Research partially supported by NSF grant MCS-80-02535Research partially supported by NSF grant MCS-77-16974     

On the determination of the coefficients in the viscoelasticity equations

For the integrodifferential viscoelasticity equations, we study the problem of determining the coefficients of the equations and the kernels occurring in the integral terms of the system of equations. The density of the medium is assumed to be given. We suppose that the inhomogeneity support of the sought functions is included in some compact domain B ₀. We consider a series of inverse problems in which an impulse source is concentrated at the points y of the boundary of B ₀. The point y is the parameter of the problem. The given information about the solution is the trace of the solution to the Cauchy problem with zero initial data. This trace is given on the boundary of B ₀ for all y ∈ ?B ₀ and for a finite time interval. The main result of the article consists in obtaining uniqueness theorems for a solution to the initial inverse problem.     

On the classification of the coadjoint orbits of the Sobolev Bott-Virasoro group

The purpose of this paper is to give the classification of the Bott-Virasoro coadjoint orbits, with nonzero central charge, in the functional analytic setting of smooth Hilbert manifolds. The central object of the paper is thus the completion of the Bott-Virasoro group with respect to a Sobolev topology, giving rise to a smooth Hilbert manifold and topological group, called the Sobolev Bott-Virasoro group. As a consequence of this approach, analytic and geometric properties of the coadjoint orbits are studied.     

Asymptotics of the distribution of the integral of the positive part of the Brownian bridge for large arguments

The double Laplace transform of the distribution function of the integral of the positive part of the Brownian bridge was determined by M. Perman and J.A. Wellner, as well as the moments of this distribution. The purpose of the present paper is to determine the asymptotics of this distribution for large values of the argument, and the corresponding asymptotics of the moments.     

Forecasting the Development of the Market for Business Telephones in the UK

The problem of producing medium- to long-term forecasts of the market for business telephones is examined. Growth curves are generally appropriate for forecasting developing markets. However, this market is particularly sensitive to the state of business confidence and the feasibility of incorporating explanatory economic variables into the forecasting model is investigated. Three different model types are compared: growth curves with a fixed saturation level, multivariate linear models and growth curves with saturation levels determined by explanatory variables. The initial promise of models using explanatory variables is considerably diminished, once forecast rather than actual values of these variables are used. The market development model implicit in the growth curve is shown to be more robust than the linear model. Although the variable saturation level growth curve grants more insight into the maturity of the market, it does not produce significantly better forecasts than that with the fixed saturation level.     

From the main equation to the Klein-Gordon equation

The purpose of this paper is to bring out some connections between the work of Isaacs and physics. The first five sections are devoted to classical dynamics. The theories of Hamilton and Jacobi are revisited via the geometrical approach to optimal control and de Broglie's ideas. The other sections contain a stochastic-type generalization, leading to the Klein-Gordon equation of relativistic wave mechanics.     

Analyzing of the effect of the dusty fluid,anisotropy and layered of the wall on the wave propagation

This study considers the propagation of time harmonic waves in, prestressed, anisotropic elastic tubes filled with viscous fluid containing dusty particles. The fluid is assumed to be incompressible and Newtonian. The tube material is considered to be incompressible, anisotropic, and elastic. The tube is subjected to a static inner pressure P_i and an axial stretch λ. Utilizing the theory of “Superposing small deformations on large initial static deformations”, differential equations governing wave propagation inside the tube are obtained in terms of cylindrical coordinates. Analytical solutions for the equations of motion for the dust and the fluid are obtained, and expressed numerically. The dispersion relation is obtained as a function of the stretch, the thickness ratio and the parameters for dusty particles.     

考虑废旧品质量的闭环供应链混合回收渠道选择研究

为确定最优的回收渠道,对由单个制造商、零售商和第三方组成的闭环供应链系统进行研究。在该系统中,可能存在制造商和零售商、制造商和第三方、零售商和第三方以及制造商、零售商和第三方同时回收的四种渠道,并根据质量差异对废旧品进行翻新或再制造。在分散决策下建立了四种回收渠道模型。比较发现:站在制造商和系统收益最大化及社会效益角度,三渠道是最佳选择,此时得到的废旧品最多;制造商不进行回收时获利最低,且不利于提高废旧品的获取量。最后,通过算例剖析了废旧品再制造率对四种混合回收渠道下成员及系统利润的影响。结果表明:制造商应尽量将废旧品用于再制造。     

A problem for the Helmholtz equation outside cuts on the plane with the dirichlet condition and the oblique derivative condition on opposite sides of the cuts

We consider a boundary value problem for the Helmholtz equation outside cuts on the plane. The Dirichlet condition is posed on one side of each cut, and an oblique derivative condition with pure imaginary coefficient of the tangential derivative is posed on the other side. We prove the uniqueness of the solution. The solvability of the problem is proved for the case in which the above-mentioned pure imaginary coefficient is less than unity in absolute value. In this case, we obtain an integral representation of the solution of the problem in the form of potentials. The densities of the potentials are found from a system of Fredholm integral equations of the second kind, which is uniquely solvable. The boundary value problem considered here generalizes the mixed Dirichlet-Neumann problem.     

关于Bloch函数的性质

研究了Bloch函数族B中的两个子族Bα与B0,给出了它们的函数之间的关系;作为应用建立了Bα与B0中函数的偏差定理,从而刻画了Bα与B0中函数的有关性质.     

Numerical solution of the differential equation describing the behavior of the zeroth-order boundary function

The asymptotic solution of the integro-differential plasma-sheath equation is considered. This equation is singularly perturbed because of the small coefficient multiplying the highest order (second) derivative. The asymptotic solution is obtained by the boundary function method. Equations are derived for the first two coefficients in the form of both a regular series expansion and an expansion in boundary functions. The equation for the first coefficient of the regular series has only a trivial solution. A numerical algorithm is considered for the solution of the second-order differential equation describing the behavior of the zeroth-order boundary function. The proposed algorithm efficiently solves the boundary-value problem and produces a well-behaved solution of the Cauchy problem. __________ Translated from Prikladnaya Matematika i Informatika, No. 23, pp. 24–35, 2006.