Methacrylic monomer was used in soap-free emulsion polymerization in order to obtain a stable dispersion containing particles of the polymerized monomer. 2,2′-Azobis(2-methylpropionitrile) (AIBN) or 1,1′-azobis(1-acetoxy-1-phenylethane) (OTAZO-15) were used as the radical initiator. Although particles with a size of about 1.0 μm were obtained when using methyl methacrylate as the monomer and AIBN as the initiator, the particles did not exhibit good dispersion stability. When OTAZO-15, which has phenyl rings, was used as the initiator, the monomer phase solidified instead of forming particles in the aqueous phase. Benzyl methacrylate (BMA) monomer, which contains a phenyl ring, was polymerized using AIBN. Negatively charged particles with a size of 0.90 μm were formed. These particles exhibited good dispersion stability probably because of the pi electrons of the phenyl ring in the BMA monomer. The method in this study allows the synthesis of nearly micron-sized particles without surfactant, organic solvent, and electrolyte. 相似文献
A previously proposed method based on soap-free emulsion polymerization with an amphoteric initiator for producing micrometer-sized polystyrene particles was extended to application with methyl methacrylate (MMA). The aggregation and dispersion stability of polymer particles, which have ionizable groups arising from initiator radicals, can be controlled by adjusting the pH of the reaction system accompanied with the addition of ionic monomer. Polymerizations were carried out with 2,2'-azobis[N-(2-carboxyethyl)-2-methylpropionamidine] tetrahydrate amphoteric initiator, NH(3)/NH(4)Cl pH buffer, and sodium p-styrenesulfonate anionic monomer (NaSS) in ranges of MMA concentration (0.58-2.32 kmol/m(3) H(2)O) and NH(3) concentration (2.5-20 mol/m(3) H(2)O) at fixed concentrations of 5 mol/m(3) H(2)O initiator, 10 mol/m(3) H(2)O NH(4)Cl, and 1 mol/m(3) H(2)O NaSS at 65 degrees C. The addition of NaSS during the polymerization could improve stability in dispersion of particles, which coagulated in the absence of NaSS after the disappearance of monomer drops. An increase in the monomer concentration in the present method could enlarge the particle size without lowering the monodispersity of the particle size distribution. On the other hand, an increase in NH(3) concentration decreased the particle size. The highest monodispersity of particle sizes was obtained at a NH(3) concentration of 5 mol/m(3) H(2)O, which gave an average size of 1.5 microm and a coefficient of variation of particle size distribution of 2.2% that was much smaller than the standard criterion for monodispersity, 10%. 相似文献
Micron-sized monodispersed polystyrene (PS)/poly(n-butyl methacrylate) composite particles were produced as follows. First, 1.77 μm-sized monodispersed PS seed particles produced
by dispersion polymerization were dispersed in ethanol/water (1/2, w/w) medium dissolving poly(vinyl alcohol) as a stabilizer.
n-Butyl methacrylate (BMA) monomer dissolving benzoyl peroxide initiator was emulsified in ethanol/water (1/2, w/w) solution
of sodium dodecyl sulfate as emulsifier with ultrasonic homogenizer, and the BMA monomer emulsion was mixed with the PS seed
emulsion. The PS seed particles absorbed with a large amount of BMA (about 150 times weight of the seed particles) for 2 h
to about 10 μm in diameter while keeping good monodispersity and BMA droplets disappeared finally. The seeded polymerization
was carried out at 70 °C after a certain amount of water was added to depress the redissolving of BMA from the swollen particles
into the medium by raising from room temperature to the polymerzation temperature.
Received: 21 February 1996 Accepted: 4 September 1996 相似文献
Redox‐cleavable mikto‐arm star polymers are prepared by an “arm‐first” approach involving copolymerization of a dimethacrylate mediated by a mixture of macroRAFT agents. Thus, RAFT copolymerization of the monomers BMA, DMAEMA, and OEGMA, with the disulfide dimethacrylate cross‐linker (DSDMA), bis(2‐methacryloyl)oxyethyl disulfide, mediated by a 1:1:1 mixture of three macroRAFT agents with markedly different properties [hydrophilic, poly[oligo(ethylene glycol) methacrylate]—P(OEGMA)8–9; cationizable, poly[2‐(dimethylamino)ethyl methacrylate]—P(DMAEMA); hydrophobic, poly(n‐butyl methacrylate)—P(BMA)] provides low dispersity mikto‐arm star polymers. Good control (Đ < 1.3) is observed for the target P(DMAEMA)/P(OEGMA)/P(BMA) (3:3:1) mikto‐arm star, a double hydrophilic P(DMAEMA)/P(OEGMA) (3:3) mikto‐arm star and a hydrophobic P(BMA) homo‐arm star. However, Đ for the target mikto‐arm stars increases with an increase in either the ratio [DSDMA]:[total macroRAFT] or the fraction of hydrophobic P(BMA) macroRAFT agent. The quaternized mikto‐arm star in dilute aqueous solution shows a monomodal particle size distribution and an average size of ≈145 nm.
Activators regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP)-based aqueous miniemulsion polymerization where the polymerization takes place in the stabilized monomer droplets is described. In this work, we compared styrene, n-butyl methacrylate (nBMA) and tert-butyl methacrylate (tBMA) and investigated the influence of their hydrophobicity on dispersity, molecular weight and particle stability based their partition coefficients (logP) (2.67, 2.23, and 1.86, respectively). Tetrabutylammonium bromide (TBAB) was used as a phase transfer agent for the controlled delivery of Cu2+-Br/tris(2-pyridylmethyl)amine (TPMA), a hydrophilic catalyst, into monomer droplets of varying hydrophobicity. The resulting dispersity and particle stability of each polymer is a function of its logP value, with the most hydrophobic monomer (styrene) displaying the narrowest dispersity and most control (Đ < 1.3), and the most hydrophilic polymer poly(tert-butyl methacrylate) (PtBMA) having reduced emulsion stability, determined by the observation of aggregate formation. Selected polymerization parameters, including effects of total ascorbic acid feed concentration and the monomer concentration and their effects on dispersity are reported. The controlled polymerizations of hydrophilic monomers using ARGET-ATRP in miniemulsion conditions and understanding the effect of monomer hydrophilicity on the emulsion stability will broaden the use of ARGET-ATRP in emulsion polymerization for the synthesis of polymer-grafted nanoparticles with hydrophilic corona. 相似文献
We have investigated a new method for HPLC using packing materials modified with a functional polymer, such as thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm). PNIPAAm-modified silica exhibits temperature-controlled hydrophilic-hydrophobic surface property changes in aqueous systems. Temperature-responsive chromatography is performed with an aqueous mobile phase without using an organic solvent. We designed ternary copolymers of NIPAAm introduced 2-(dimethyl-amino) ethyl methacrylate (DMAEMA) as a cationic monomer and butyl methacrylate (BMA) as a hydrophobic monomer. A cationic thermoresponsive hydrogel grafted surface would produce an alterable stationary phase with both thermally regulated hydrophobicity and charge density for separation of bioactive compounds. In this study, we achieved successful separation of lysozyme without the loss of bioactivity by temperature-responsive chromatography. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase, thus the separation system would have potential applications in the separation of biomolecules. 相似文献
Micron-sized, monodisperse polystyrene (PS)/poly( n-butyl methacrylate) (PBMA) composite particles, in which PS domain(s) were dispersed in a PBMA continuous phase, were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles (PS/BMA=1/150, w/w) using various concentrations of benzoyl peroxide as initiator in the absence/presence of sodium nitrite (NaNO 2) as a water-soluble inhibitor. The percentages of the composite particles having double, triple and over PS domains, which were thermodynamically unstable morphologies, increased with a rapid increase of viscosity within the polymerizing particle. 相似文献
