共查询到20条相似文献,搜索用时 500 毫秒
1.
Silca-supported Co3O4 (6 wt% as Co) catalysts were prepared by pore volume impregnation of ethanol or aqueous cobalt nitrate solutions, and calcined in vacuo to 300 °C. The catalytic performances of these catalysts for oxidation and hydrogenation of CO were examined. All Co3O4/SiO2 catalysts were found to be very active in catalyzing oxidation of CO to CO2 as compared to a commercial 1 wt% Pt/Al2O3. The ethanol-prepared catalysts exhibited higher activity than those of the aqua-prepared catalysts. Pre-calcination of the ethanol-prepared catalysts in oxygen at 600 °C resulted in a dramatic decrease in the activity. Temperature programmed oxidation indicated the presence of carbon deposits on the surface of used catalysts. Infrared spectra showed the continuous generation of CO2 when these catalysts were exposed to CO. These indicate the primary role of CO disproportionation in catalytic oxidation of CO on Co3O4 at low temperature and explain the sharp decrease in activity in the initial period. After reduction at 400 °C, the ethanol-prepared catalysts were also found to be more active in catalyzing hydrogenation of CO, and produced less methane and olefin (C2-C4) fraction. Higher turnover frequencies were observed after high temperature reduction (600 °C) as well, at which ethoxyl groups were removed from silica surface. In both reactions, the enhanced activity for the ethanol-prepared catalysts can not be fully accounted for by the increase in the dispersion of Co3O4 or CO metal. This suggests that the surface structures of Co3O4 or CO were further modified by the carbonaceous species derived from ethanol. 相似文献
2.
G. V. Mamontov V. V. Dutov V. I. Sobolev O. V. Vodyankina 《Kinetics and Catalysis》2013,54(4):487-491
The catalysts of silver supported on mesoporous silica modified with Co3O4, CeO2, and ZrO2 were prepared by an impregnation method; characterized by X-ray diffraction analysis, temperature-programmed reduction, and low-temperature nitrogen adsorption; and studied in a model reaction of CO oxidation. It was found that the Ag/SiO2 system exhibited high activity in the reaction of CO oxidation, and the addition of transition metal oxides led to reduction of the temperature of 50% CO conversion by 40°C. The modification of Ag/SiO2 with cerium dioxide was found most effective because of the interaction of silver particles and CeO2 on the surface of silica gel. 相似文献
3.
CO oxidation over Co3O4/SiO2 catalysts: Effects of porous structure of silica and catalyst calcination temperature
下载免费PDF全文
![点击此处可从《天然气化学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The catalytic performances of Co3O4/SiO2 catalysts prepared by incipient wetness impregnation for CO oxidation were investigated using three kinds of silica as carriers with different pore sizes of 7.7, 14.0 and 27.0 nm. The effects of calcination temperature on the catalyst surface and micro structure properties as well as catalytic performance for the oxidation of carbon monoxide were also studied. All catalysts were characterized by N2 adsorption-desorption, XRD, XPS, FTIR, H2-TPR and O2-TPD. It was found that the properties and crystal size of cobalt-containing species strongly depended on the pore size of silica carrier. While the silica pore size increased from 7.7 to 27.0 nm, the Co3O4 crystal size increased from 8.5 to 13.5 nm. Moreover, it was demonstrated that if the spinel crystal structure of Co3O4 was obtained at a calcination temperature as low as 150 ℃, the catalyst sample would have a high Co3O4 surface dispersion and a increase of surface active species, and thus exhibit a high activity for the oxidation of carbon monoxide. 相似文献
4.
介孔氧化铝负载Ni-Co氧化物催化剂上丙烷氧化脱氢制丙烯 总被引:1,自引:0,他引:1
以非离子型三嵌段共聚物作为模板剂, 异丙醇铝为氧化铝的前驱物, 采用一锅法合成了一系列介孔氧化铝负载镍氧化物、钴氧化物以及镍-钴双金属氧化物催化剂, 并以介孔氧化铝为载体, 采用浸渍法制备了负载Ni-Co 氧化物催化剂. 采用N2吸附-脱附、高分辨透射电镜(HRTEM)、X射线粉末衍射(XRD)、H2程序升温还原(H2-TPR)以及激光拉曼光谱(LRS)等技术对催化剂的结构与性质进行表征, 并考察了催化剂的丙烷氧化脱氢反应性能. 结果表明: 一锅法制备的各催化剂均有大的比表面积和规整的孔道结构, 且负载的金属氧化物高度分散; 而浸渍法制备的催化剂, 其载体的介孔结构被破坏并有Co3O4晶相生成. 在考察的催化剂中, 一锅法合成的介孔氧化铝负载Ni-Co 氧化物催化剂表现出最佳的丙烷氧化脱氢性能. 在450 °C、C3H8:O2:N2的摩尔比为1:1:4和空速(GHSV)为10000 mL·g-1·h-1条件下, 该催化剂上丙烯产率为10.3%, 远高于浸渍法制备的催化剂上所获得的丙烯产率(2.4%). 关联催化剂表征和反应结果, 讨论了催化剂结构与性能之间的关系. 相似文献
5.
《中国化学快报》2023,34(7):107777
CO oxidation is a benchmark in heterogeneous catalysis for evaluation of redox catalysts due to its practical relevance in many applications and the fundamental problems associated with its very high activity at low temperatures. Among which, Co3O4 is one of the most active non-precious metal catalysts. Exposed crystal planes and cobalt sites are considered to be important for its high catalytic activity. Herein, we demonstrate an enhanced CO oxidation activity by a defect-rich mesoporous Co3O4 that prepared by a designed dual-template method. Two different kinds of silicas are used as hard-templates at the same time, resulting in a defect-rich mesoporous Co3O4 with a surface area as high as 169 m2/g. This catalyst exhibited a very high catalytic activity for low temperature CO oxidation with a light-off temperature at −73 oC under the space velocity of 80,000 mL h-1 gcat-1. Further studies reveal that the high surface area promotes the lattice oxygen mobility, surface rich of Co2+ species and active oxygen species are crucial for the high catalytic activity. Moreover, the dual-template approach paves a way towards the design and construction of high-surface-area mesoporous metal oxides for various applications. 相似文献
6.
SiO2 with different nanostructures, namely hexagonal mesoporous silica(HMS), and three unordered commercial silica, were used as supports to fabricate silver catalysts using an incipient wetness impregnation method. It was found that Ag/HMS catalyst showed a high catalytic activity. Next, the HMS support was calcined at different temperatures before impregnation of AgNO3. The effect of calcination temperature of HMS support was investigated in terms of structure and catalytic activity of Ag catalysts. The support and catalysts were characterized by N2 adsorption-desorption isotherms, Thermogravimetric-differential thermal analyzer, X-ray diffraction, H2-temperature program reduction and transmission electron microscopy. The results showed that calcination of HMS at an appro- priate temperature(750℃) before catalyst preparation would benefit the formation of highly dispersive small sized Ag particles on the HMS support and markedly enhance the catalytic activity of Ag/HMS catalyst toward CO oxidation. 相似文献
7.
Mingshi Jin Zhenghua Li Wenxiang Piao Jing Chen Long Yi Jin Ji Man Kim 《Catalysis Surveys from Asia》2017,21(2):45-52
Highly ordered mesoporous cobalt-copper composite oxides were prepared by the nanocasting method with various Co and Cu ratios. The catalysts obtained were characterized by X-ray diffraction, N2 adsorption–desorption, H2-temperature programmed reduction, CO-temperature programmed desorption and X-ray photoelectron spectroscopy. All of the catalysts had uniform mesopores and high surface areas. The distinct catalytic properties of these well-characterized mesoporous materials were demonstrated for preferential CO oxidation. It is found that the mesoporous cobalt-copper composite oxides, exhibited the higher catalytic activity for CO conversion and selectivity compared with the mesoporous Co3O4 and mesoporous CuO. Among these catalysts the mesoporous cobalt-copper catalyst with Co:Cu molar ratio of 70:30, shows the best catalytic activity and the broadest operating temperature “window” for the high CO conversion in the range of 125–200oC. The higher catalytic activity was attributed to the higher CO adsorption and oxygen vacancies. 相似文献
8.
Effect of Calcination Temperature on Surface Oxygen Vacancies and Catalytic Performance Towards CO Oxidation of Co3O4 Nanoparticles Supported on SiO2
下载免费PDF全文
![点击此处可从《化学物理学报(中文版)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char-acterized with X-ray diffraction (XRD), laser Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR) and X-ray absorption fine structure (XAFS) spectroscopy. Both XRD and Raman spectroscopy only detect the ex-istence of Co3O4 crystallites in all catalysts. However, XPS results indicate that excess Co2+ ions are present on the surface of Co3O4 in Co3O4(200)/SiO2 as compared with bulk Co3O4. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co3O4 in Co3O4(200)/SiO2, and XAFS results demonstrate that Co3O4 in Co3O4(200)/SiO2 con-tains excess Co2+. Increasing calcination temperature results in oxidation of excess Co2+ and the decrease of the concentration of surface oxygen vacancies, consequently the for-mation of stoichiometric Co3O4 on supported catalysts. Among all Co3O4/SiO2 catalysts,Co3O4(200)/SiO2 exhibits the best catalytic performance towards CO oxidation, demon-strating that excess Co2+ and surface oxygen vacancies can enhance the catalytic activity of Co3O4 towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silica-supported Co3O4 catalysts and highlight the important role of surface oxygen vacancies on Co3O4. 相似文献
9.
Yuanyuan Guo Limin Chen Ding Ma Daiqi Ye Bichun Huang 《Journal of Energy Chemistry》2013,22(4):591-598
Activated carbon (AC) supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation (PROX) in excess H2 was evaluated. Ag/AC catalysts, after reduction in H2 at low temperatures (≤200 °C) following heat treatment in He at 200 °C (He200H200), exhibited the best catalytic properties. Temperature-programmed desorption (TPD), X-ray diffraction (XRD) and temperature-programmed reduction (TPR) results indicated that silver oxides were produced during heat treatment in He at 200 °C which were reduced to metal silver nanoparticles in H2 at low temperatures (≤200 °C), simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 °C. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H200 treatment displayed similar PROX of CO reaction properties to Ag/SiO2. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst. 相似文献
10.
Haocun Tan Prof. Dongyun Chen Prof. Najun Li Prof. Qingfeng Xu Prof. Hua Li Prof. Jinghui He Prof. Jianmei Lu 《Chemistry (Weinheim an der Bergstrasse, Germany)》2019,25(72):16718-16724
Precious-metal catalysts (e.g., Au, Rh, Ag, Ru, Pt, and Pd) supported on transition-metal oxides (e.g., Al2O3, Fe2O3, CeO2, ZrO2, Co3O4, MnO2, TiO2, and NiO) can effectively oxidize volatile organic compounds. In this study, porous platinum-supported zirconia materials have been prepared by a “surface-casting” method. The synthesized catalysts present an ordered nanotube structure and exhibited excellent performance toward the catalytic oxidation of formaldehyde. A facile method, utilizing a boiling water bath, was used to fabricate graphene aerogel (GA), and the macroscopic 3D Pt/ZrO2-GA was modified by introducing an adjustable MOF coating by a surface step-by-step method. The unblocked mesoporous structure of the graphene aerogel facilitates the ingress and egress of reactants and product molecules. The selected 7 wt.% Pt/ZrO2-GA-MOF-5 composite demonstrated excellent performance for HCHO adsorption. Additionally, this catalyst achieved around 90 % conversion when subjected to a reaction temperature of 70 °C (T90 %=70 °C). The Pt/ZrO2-GA-MOF-5 composite induces a catalytic cycle, increasing the conversion by simultaneously adsorbing and oxidizing HCHO. This work provides a simple approach to increasing reactant concentration on the catalyst to increase the rate of reaction. 相似文献
11.
以SBA-15为载体,采用浸渍法制备了不同Ag含量的Ag/SBA-15,通过N2吸附-脱附、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜、X射线光电子能谱和电感耦合等离子体质谱对催化剂进行了表征。将Ag/SBA-15用于苯甲醇气相选择性催化氧化合成苯甲醛,研究了反应条件对转化率和选择性的影响。结果表明,Ag/SBA-15具有均一的一维孔道结构、较厚的孔壁(3-5 nm)及较大的比表面积(411-541 m2/g),其规整纳米空间的限域作用使一定负载量的Ag以纳米尺寸均匀分散于介孔SBA-15孔道内,增加了活性组分的比表面积。亲核性氧物种从Ag到SBA-15表面的氧溢流,提高了低温下Ag/SBA-15对苯甲醇气相选择性氧化合成苯甲醛的催化性能。5.3% Ag/SBA-15中的Ag粒径为5-6 nm,且均匀分散于载体孔道中,反应温度为220℃时,苯甲醇转化率为87%,苯甲醛选择性为95%;240℃时,苯甲醇转化率和苯甲醛选择性分别高达94%和97%;并在240-300℃范围内,其催化活性和选择性保持不变,表现出了良好的温度耐受能力。催化剂经活化再生可以连续使用40 h,选择性基本保持不变。 相似文献
12.
采用溶剂法合成了热稳定性高的金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier),用此材料为载体负载钴催化剂用于CO的催化氧化反应,并与Al2O3负载的钴催化剂进行了对比.采用热重-差热扫描量热(TG-DSC)、傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)、N2物理吸附-脱附、透射电子显微镜(TEM)、氢气程序升温还原(H2-TPR)等方法对催化剂的结构性质进行了表征.TG和N2物理吸附-脱附结果表明,载体MIL-53(Al)有好的稳定性和高的比表面积;XRD以及TEM结果表明Co/MIL-53(Al)上负载的Co3O4颗粒粒径(平均约为5.03 nm)明显小于Al2O3上Co3O4颗粒粒径(平均约为7.83 nm).MIL-53(Al)的三维多孔结构中分布均匀的位点能很好地分散固定Co3O4颗粒,高度分散的Co3O4颗粒有利于CO的催化氧化反应.H2-TPR实验发现Co/MIL(Al)催化剂的还原温度低于Co/Al2O3催化剂的还原温度,低的还原温度表现为高的催化氧化活性.CO催化氧化结果表明,MIL-53(Al)负载钴催化剂的催化活性明显高于Al2O3负载钴催化剂,MIL-53(Al)负载钴催化剂在160°C时使CO氧化的转化率达到98%,到180°C时CO则完全转化,催化剂的结构在催化反应过程中保持稳定. 相似文献
13.
Monolithically Integrated Spinel MxCo3−xO4 (M=Co,Ni, Zn) Nanoarray Catalysts: Scalable Synthesis and Cation Manipulation for Tunable Low‐Temperature CH4 and CO Oxidation
下载免费PDF全文
![点击此处可从《Angewandte Chemie (International ed. in English)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Zheng Ren Venkatesh Botu Sibo Wang Yongtao Meng Wenqiao Song Dr. Yanbing Guo Prof. Dr. Ramamurthy Ramprasad Prof. Dr. Steven L. Suib Prof. Dr. Pu‐Xian Gao 《Angewandte Chemie (International ed. in English)》2014,53(28):7223-7227
A series of large scale MxCo3?xO4 (M=Co, Ni, Zn) nanoarray catalysts have been cost‐effectively integrated onto large commercial cordierite monolithic substrates to greatly enhance the catalyst utilization efficiency. The monolithically integrated spinel nanoarrays exhibit tunable catalytic performance (as revealed by spectroscopy characterization and parallel first‐principles calculations) toward low‐temperature CO and CH4 oxidation by selective cation occupancy and concentration, which lead to controlled adsorption–desorption behavior and surface defect population. This provides a feasible approach for scalable fabrication and rational manipulation of metal oxide nanoarray catalysts applicable at low temperatures for various catalytic reactions. 相似文献
14.
Identification of the Active Sites for Low Temperature CO Oxidation over Nanocrystalline Co3O4 Catalysts
下载免费PDF全文
![点击此处可从《中国化学会会志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The microstructural properties of dry‐grinding derived Co3O4 catalysts pretreated under different atmospheres, in relation to the activities on CO oxidation were investigated. The Co3O4 synthesized by soft reactive grinding and pretreated with O2 resulted in the best activity, with 100% conversion of CO at ?52 °C, superior to that of Co3O4 pretreated with He. To find out the active sites on Co3O4 for low temperature CO oxidation, the characterizations of the cobalt oxides had been investigated by means of N2 physisorption, XRD, TEM, H2‐TPR, CO‐titration, XPS and O2‐TPD technologies. XPS of Co2p results show that it is difficult to ascribe the difference in catalytic performance to the surface concentration of active Co3+ sites. A correlation between the activity and the CO‐titration and O2‐TPD results for Co3O4 reveals that a high abundance of readily accessible superficial electrophilic oxygen (O?) species is important for achieving a high activity. Therefore, CO oxidation takes place on the surface active oxygen sites in Co3O4 crystallites via the suprafacial mechanism. 相似文献
15.
Cobalt‐based catalyst, as a typical catalyst for volatile organic compounds (VOCs) combustion, has attracted extensive attention. However, the catalytic activity of pure Co3O4 is difficult to meet the requirements of practical application especially at low temperatures. Therefore, it is key to find an effective way to improve the catalytic performance of Co3O4. In this paper, Co3O4 is modified by engineering a combination of structural template and Ce dopant. The various characterization results verify that the template agent and the doping of appropriate Ce lead to great changes in the texture property and low temperature reducibility of Co3O4, thus resulting in superior catalytic performances of obtained mesoporous CexCoO catalysts. In particular, the best catalyst, Ce0.05CoO, achieves a toluene conversion of T90% at 238°C, which is significantly lower than many of the Co‐based catalysts reported in previous literatures. Furthermore, the toluene conversion rate maintains above 90% during 100 h at 238°C. The excellent catalytic performance of Ce0.05CoO can be attributed to its large specific surface area, uniform pore structure, good low temperature reducibility, and abundant surface oxygen species. 相似文献
16.
采用沉淀法制备了 Co3O4, 考察了焙烧和预处理条件对其结构、低温催化氧化 CO 性能的影响. 热重分析表明, 未经焙烧的样品以 Co(OH)2CO3 的形式存在, 150~400 oC 空气气氛中焙烧后, 样品以立方相 Co3O4 的形式存在. N2 吸附-脱附法、X 射线衍射、透射电镜及活性测试结果表明, 以纳米颗粒物存在的 Co3O4 的比表面积、颗粒尺寸、催化氧化 CO 活性与焙烧温度密切相关. 正电子湮没寿命谱、O2-程序升温脱附与定温条件下 CO 氧化测试结果表明, 合适温度 (150~250 oC) 下 N2 预处理有利于 Co3O4 表面氧空穴团的形成, 它在吸附活化分子氧以及 CO 催化氧化反应中起到关键作用. 同时讨论了预处理作用下Co3O4表面氧空穴的再构机制. 相似文献
17.
Mesoporous Mn-doped Co3O4 catalysts were successfully prepared via a dry soft reactive grinding method based on solid state reaction, and their catalytic performances on CO oxidation were evaluated at a high space velocity of 49,500 mL g−1 h−1. A significant promoted effect was observed once the atomic ratios of Mn/(Co+Mn) were lower than 10%, for instance, the temperature for 50% conversion decreased to about −60 °C, showing superior catalytic performance compared to the single metal oxide. Especially, the Mn-promoted Co3O4 catalyst with a Mn/(Co+Mn) molar ratio of 10% could convert 100% CO after 3000 min of time-on-steam without any deactivation at room temperature. As prepared catalysts were characterized by XRD, N2-adsorption/desorption, TEM, H2-TPR, O2-TPD and CO-titration analysis. The significant enhancement of performance for oxidation of CO over Mn-Co-O mixed oxides was associated with the high active oxygen species concentrations formed during the pretreatment in O2 atmosphere. 相似文献
18.
空气中低浓度甲醛的治理和消除一直备受关注.在较低的反应温度下将甲醛转化为CO_2和H_2O的催化氧化法具有能耗低、效率高和环境友好等优点,被认为是一种最具应用发展前景的甲醛消除技术.在各种催化剂体系中,一些铁基氧化物(Fe_2O_3,FFe_3O_4或ferrihydrite)负载的Pt催化剂表现出较为优异的催化性能,能够在室温下实现甲醛的完全氧化.越来越多的研究表明,载体材料的结构及形貌是影响贵金属催化剂性能的主要因素.因此,深入研究Pt物种在不同类型铁基氧化物表面的分散情况及界面间相互作用,对理解催化剂活性中心的性质,设计制备性能更加优异的负载型贵金属催化剂具有重要科学意义.本文采用共沉淀法一步合成出八面体Fe_3O_4亚微米晶负载Pt催化剂(Pt/Fe_3O_4),考察了不同热处理温度对催化剂催化甲醛氧化反应性能的影响.结果表明,在80°C下热处理的催化剂(Pt/Fe_3O_4-80)具有很高的催化活性,在室温下甲醛的转化率可接近100%.随着催化剂热处理温度的升高,催化剂活性有所降低.此外,Pt/Fe_3O_4催化剂还表现出良好的稳定性,经长时间存放或连续运行后催化剂的活性基本保持不变.此外,在一定湿度范围内(RH=30%–80%),水的存在能够显著提高Pt/Fe_3O_4催化剂的甲醛催化氧化性能.采用各种表征技术对Pt/Fe_3O_4的结构、形貌、价态及氧化还原性等物理化学性质进行了研究.结果表明:采用该合成方法能够得到粒径较为均一、具有尖晶石结构和八面体形貌的Fe_3O_4亚微米晶,尺寸较小的Pt纳米粒子(平均2.5 nm)均匀分布在八面体Fe_3O_4晶体的表面,且Fe_3O_4载体表面还存在一定量的羟基物种.随着热处理温度的升高,催化剂表面的Pt物种和Fe物种的价态均发生明显变化.结果证实,Pt纳米粒子与Fe_3O_4载体间的相互作用力会随着热处理温度的升高而发生明显变化.对于性能较为优异的Pt/Fe_3O_4-80催化剂,Pt纳米粒子与Fe_3O_4载体之间存在着强度适宜的相互作用,能够产生相对较多的Pt-O-Fe Ox和Pt-OH-Fe Ox界面活性位,从而使其能够在较低的反应温度下表现出较强的活化分子氧的能力.此外,反应体系中引入的水分子能够与氧分子在界面活性位上共同活化,形成表面活性-OH物种,从而有效促进催化剂反应性能的提升. 相似文献
19.
《中国化学快报》2020,31(7):1966-1969
Formaldehyde (HCHO) is one kind of common indoor toxic pollutant, the catalytic oxidation degradation of formaldehyde at room temperature is desired. In this work, a new single atomic catalyst (SAC), Al doped graphene, for the catalytic oxidation of HCHO molecules was proposed through density function theory (DFT) calculations. It is found that Al atoms can be adsorbed on graphene stably without aggression. Then HCHO can be effectively oxidized into CO2 and H2O in the presence of O2 molecules on Al doped graphene with a low energy barrier of 0.82 eV and releasing energy of 2.29 eV with the pathway of HCHO → HCOOH → CO → CO2. The oxidation reaction can happen promptly with reaction time τ = 56.9 s at the speed control step at room temperature. Therefore, this work proposed a high-performance catalyst Al-doped graphene without any noble metal for HCHO oxidation at ambient temperature, and corresponding oxidation pathway and mechanism are also deeply understood. 相似文献
20.
研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因. 相似文献