Recent Advances in In Silico Target Fishing

In silico target fishing, whose aim is to identify possible protein targets for a query molecule, is an emerging approach used in drug discovery due its wide variety of applications. This strategy allows the clarification of mechanism of action and biological activities of compounds whose target is still unknown. Moreover, target fishing can be employed for the identification of off targets of drug candidates, thus recognizing and preventing their possible adverse effects. For these reasons, target fishing has increasingly become a key approach for polypharmacology, drug repurposing, and the identification of new drug targets. While experimental target fishing can be lengthy and difficult to implement, due to the plethora of interactions that may occur for a single small-molecule with different protein targets, an in silico approach can be quicker, less expensive, more efficient for specific protein structures, and thus easier to employ. Moreover, the possibility to use it in combination with docking and virtual screening studies, as well as the increasing number of web-based tools that have been recently developed, make target fishing a more appealing method for drug discovery. It is especially worth underlining the increasing implementation of machine learning in this field, both as a main target fishing approach and as a further development of already applied strategies. This review reports on the main in silico target fishing strategies, belonging to both ligand-based and receptor-based approaches, developed and applied in the last years, with a particular attention to the different web tools freely accessible by the scientific community for performing target fishing studies.     

Improvement of protein-compound docking scores by using amino-acid sequence similarities of proteins

The low accuracy of predicted docking scores is critical at in silico drug screening. In order to improve the accuracy of docking scores, we approximated the protein-compound binding free energy as a linear combination of the raw docking scores of a target compound with many different protein pockets. The coefficients of the linear combination were estimated by the similarities among proteins, simply by using the amino-acid sequence similarities or identities of the proteins. This method was applied to in silico screening of the active compounds of five target proteins, and it increased the hit ratio by approximately four to five times compared to that given only by the raw docking scores in every case. The hit ratio also became robust against differences of target proteins.     

Receptor-based computational screening of compound databases: the main docking-scoring engines

The processes used by academic and industrial scientists to discover new drugs have recently experienced a true renaissance with many new and exciting techniques. The number of protein structures and/or chemical ligands is constantly growing, through the use of parallel chemistry, X-ray crystallography, NMR or homology modeling methods and so is the theoretical understanding of protein-ligand interactions. As such, structure-based approaches to drug-design and in silico screening are becoming routine part of most modern lead discovery programs. Prioritization of compound libraries is an extremely important task that aims at the rapid identification of tight-binding ligands and ultimately new therapeutic compounds. These in silico approaches combined with other experimental methods facilitate the design of new medicines to treat cardiovascular, degenerative, infectious, and neoplastic diseases, among others. Here, we review key concepts and specific features of several selected ligand-receptor docking/scoring methods while several other topics pertaining to the field of in silico screening are reviewed in the following articles of this special issue of Current Protein and Peptide Science.     

Selection of in silico drug screening results for G-protein-coupled receptors by using universal active probes

We developed a new protocol for in silico drug screening for G-protein-coupled receptors (GPCRs) using a set of "universal active probes" (UAPs) with an ensemble docking procedure. UAPs are drug-like compounds, which are actual active compounds of a variety of known proteins. The current targets were nine human GPCRs whose three-dimensional (3D) structures are unknown, plus three GPCRs, namely β(2)-adrenergic receptor (ADRB2), A(2A) adenosine receptor (A(2A)), and dopamine D3 receptor (D(3)), whose 3D structures are known. Homology-based models of the GPCRs were constructed based on the crystal structures with careful sequence inspection. After subsequent molecular dynamics (MD) simulation taking into account the explicit lipid membrane molecules with periodic boundary conditions, we obtained multiple model structures of the GPCRs. For each target structure, docking-screening calculations were carried out via the ensemble docking procedure, using both true active compounds of the target proteins and the UAPs with the multiple target screening (MTS) method. Consequently, the multiple model structures showed various screening results with both poor and high hit ratios, the latter of which could be identified as promising for use in in silico screening to find candidate compounds to interact with the proteins. We found that the hit ratio of true active compounds showed a positive correlation to that of the UAPs. Thus, we could retrieve appropriate target structures from the GPCR models by applying the UAPs, even if no active compound is known for the GPCRs. Namely, the screening result that showed a high hit ratio for the UAPs could be used to identify actual hit compounds for the target GPCRs.     

Noise reduction method for molecular interaction energy: application to in silico drug screening and in silico target protein screening

We developed a new method to improve the accuracy of molecular interaction data using a molecular interaction matrix. This method was applied to enhance the database enrichment of in silico drug screening and in silico target protein screening using a protein-compound affinity matrix calculated by a protein-compound docking software. Our assumption was that the protein-compound binding free energy of a compound could be improved by a linear combination of its docking scores with many different proteins. We proposed two approaches to determine the coefficients of the linear combination. The first approach is based on similarity among the proteins, and the second is a machine-learning approach based on the known active compounds. These methods were applied to in silico screening of the active compounds of several target proteins and in silico target protein screening.     

Established and emerging trends in computational drug discovery in the structural genomics era

Bioinformatics and chemoinformatics approaches contribute to hit discovery, hit-to-lead optimization, safety profiling, and target identification and enhance our overall understanding of the health and disease states. A vast repertoire of computational methods has been reported and increasingly combined in order to address more and more challenging targets or complex molecular mechanisms in the context of large-scale integration of structure and bioactivity data produced by private and public drug research. This review explores some key computational methods directly linked to drug discovery and chemical biology with a special emphasis on compound collection preparation, virtual screening, protein docking, and systems pharmacology. A list of generally freely available software packages and online resources is provided, and examples of successful applications are briefly commented upon.     

Identification of potential inhibitors against nuclear Dam1 complex subunit Ask1 of Candida albicans using virtual screening and MD simulations

Identification of hit compounds against specific target form the starting point for a drug discovery program. A consistent decline of new chemical entities (NCEs) in recent years prompted a challenge to explore newer approaches to discover potential hit compounds that in turn can be converted into leads, and ultimately drug with desired therapeutic efficacy. The vast amount of omics and activity data available in public databases offers an opportunity to identify novel targets and their potential inhibitors. State of the art in silico methods viz., clustering of compounds, virtual screening, molecular docking, MD simulations and MMPBSA calculations were employed in a pipeline to identify potential ‘hits’ against those targets as well whose structures, as of now, could only predict through threading approaches. In the present work, we have started from scratch, amino acid sequence of target and compounds retrieved from PubChem compound database, modeled it in such a way that led to the identification of possible inhibitors of Dam1 complex subunit Ask1 of Candida albicans. We also propose a ligand based binding site determination approach. We have identified potential inhibitors of Ask1 subunit of a Dam1 complex of C. albicans, which is required to prevent precocious spindle elongation in pre-mitotic phases. The proposed scheme may aid to find virtually potential inhibitors of other unique targets against candida.     

Antiviral Activity of Metabolites from Peruvian Plants against SARS-CoV-2: An In Silico Approach

(1) Background: The COVID-19 pandemic lacks treatments; for this reason, the search for potential compounds against therapeutic targets is still necessary. Bioinformatics tools have allowed the rapid in silico screening of possible new metabolite candidates from natural resources or repurposing known ones. Thus, in this work, we aimed to select phytochemical candidates from Peruvian plants with antiviral potential against three therapeutical targets of SARS-CoV-2. (2) Methods: We applied in silico technics, such as virtual screening, molecular docking, molecular dynamics simulation, and MM/GBSA estimation. (3) Results: Rutin, a compound present in Peruvian native plants, showed affinity against three targets of SARS-CoV-2. The molecular dynamics simulation demonstrated the high stability of receptor–ligand systems during the time of the simulation. Our results showed that the Mpro-Rutin system exhibited higher binding free energy than PLpro-Rutin and N-Rutin systems through MM/GBSA analysis. (4) Conclusions: Our study provides insight on natural metabolites from Peruvian plants with therapeutical potential. We found Rutin as a potential candidate with multiple pharmacological properties against SARS-CoV-2.     

Can an in silico drug-target search method be used to probe potential mechanisms of medicinal plant ingredients?

Medicinal plants have been explored therapeutically in traditional medicines and are a valuable source for drug discovery. Insufficient knowledge about the molecular mechanism of these medicinal plants limits the scope of their application and hinders the effort to design new drugs using the therapeutic principles of herbal medicines. This problem can be partially alleviated if efficient methods for rapid identification of protein targets of herbal ingredients can be introduced. Efforts have been directed at developing efficient computer methods for facilitating target identification. Various methods being explored or under investigation are reviewed here. So far, one computer method, INVDOCK, has been specifically used for automated drug target identification. Its usefulness in the identification of therapeutic targets of medicinal herbal ingredients as well as synthetic chemicals is reviewed. The majority of INVDOCK identified therapeutic targets of several well-known medicinal herbal ingredients have been found to be confirmed or implicated by experiments, which suggests the potential of in silico methods in facilitating the study of molecular mechanism of medicinal plants.     

Binding mode prediction and MD/MMPBSA-based free energy ranking for agonists of REV-ERBα/NCoR

The knowledge of the free energy of binding of small molecules to a macromolecular target is crucial in drug design as is the ability to predict the functional consequences of binding. We highlight how a molecular dynamics (MD)-based approach can be used to predict the free energy of small molecules, and to provide priorities for the synthesis and the validation via in vitro tests. Here, we study the dynamics and energetics of the nuclear receptor REV-ERBα with its co-repressor NCoR and 35 novel agonists. Our in silico approach combines molecular docking, molecular dynamics (MD), solvent-accessible surface area (SASA) and molecular mechanics poisson boltzmann surface area (MMPBSA) calculations. While docking yielded initial hints on the binding modes, their stability was assessed by MD. The SASA calculations revealed that the presence of the ligand led to a higher exposure of hydrophobic REV-ERB residues for NCoR recruitment. MMPBSA was very successful in ranking ligands by potency in a retrospective and prospective manner. Particularly, the prospective MMPBSA ranking-based validations for four compounds, three predicted to be active and one weakly active, were confirmed experimentally.     

Repositioning of Quinazolinedione-Based Compounds on Soluble Epoxide Hydrolase (sEH) through 3D Structure-Based Pharmacophore Model-Driven Investigation

The development of new bioactive compounds represents one of the main purposes of the drug discovery process. Various tools can be employed to identify new drug candidates against pharmacologically relevant biological targets, and the search for new approaches and methodologies often represents a critical issue. In this context, in silico drug repositioning procedures are required even more in order to re-evaluate compounds that already showed poor biological results against a specific biological target. 3D structure-based pharmacophoric models, usually built for specific targets to accelerate the identification of new promising compounds, can be employed for drug repositioning campaigns as well. In this work, an in-house library of 190 synthesized compounds was re-evaluated using a 3D structure-based pharmacophoric model developed on soluble epoxide hydrolase (sEH). Among the analyzed compounds, a small set of quinazolinedione-based molecules, originally selected from a virtual combinatorial library and showing poor results when preliminarily investigated against heat shock protein 90 (Hsp90), was successfully repositioned against sEH, accounting the related built 3D structure-based pharmacophoric model. The promising results here obtained highlight the reliability of this computational workflow for accelerating the drug discovery/repositioning processes.     

Rapid Identification of Potential Drug Candidates from Multi-Million Compounds’ Repositories. Combination of 2D Similarity Search with 3D Ligand/Structure Based Methods and In Vitro Screening

Rapid in silico selection of target focused libraries from commercial repositories is an attractive and cost-effective approach in early drug discovery. If structures of active compounds are available, rapid 2D similarity search can be performed on multimillion compounds’ databases. This approach can be combined with physico-chemical parameter and diversity filtering, bioisosteric replacements, and fragment-based approaches for performing a first round biological screening. Our objectives were to investigate the combination of 2D similarity search with various 3D ligand and structure-based methods for hit expansion and validation, in order to increase the hit rate and novelty. In the present account, six case studies are described and the efficiency of mixing is evaluated. While sequentially combined 2D/3D similarity approach increases the hit rate significantly, sequential combination of 2D similarity with pharmacophore model or 3D docking enriched the resulting focused library with novel chemotypes. Parallel integrated approaches allowed the comparison of the various 2D and 3D methods and revealed that 2D similarity-based and 3D ligand and structure-based techniques are often complementary, and their combinations represent a powerful synergy. Finally, the lessons we learnt including the advantages and pitfalls of the described approaches are discussed.     

Exploring EZH2-Proteasome Dual-Targeting Drug Discovery through a Computational Strategy to Fight Multiple Myeloma

Multiple myeloma is an incurable plasma cell neoplastic disease representing about 10–15% of all haematological malignancies diagnosed in developed countries. Proteasome is a key player in multiple myeloma and proteasome inhibitors are the current first-line of treatment. However, these are associated with limited clinical efficacy due to acquired resistance. One of the solutions to overcome this problem is a polypharmacology approach, namely combination therapy and multitargeting drugs. Several polypharmacology avenues are currently being explored. The simultaneous inhibition of EZH2 and Proteasome 20S remains to be investigated, despite the encouraging evidence of therapeutic synergy between the two. Therefore, we sought to bridge this gap by proposing a holistic in silico strategy to find new dual-target inhibitors. First, we assessed the characteristics of both pockets and compared the chemical space of EZH2 and Proteasome 20S inhibitors, to establish the feasibility of dual targeting. This was followed by molecular docking calculations performed on EZH2 and Proteasome 20S inhibitors from ChEMBL 25, from which we derived a predictive model to propose new EZH2 inhibitors among Proteasome 20S compounds, and vice versa, which yielded two dual-inhibitor hits. Complementarily, we built a machine learning QSAR model for each target but realised their application to our data is very limited as each dataset occupies a different region of chemical space. We finally proceeded with molecular dynamics simulations of the two docking hits against the two targets. Overall, we concluded that one of the hit compounds is particularly promising as a dual-inhibitor candidate exhibiting extensive hydrogen bonding with both targets. Furthermore, this work serves as a framework for how to rationally approach a dual-targeting drug discovery project, from the selection of the targets to the prediction of new hit compounds.     

In Silico Molecular Docking and Simulation Studies of Protein HBx Involved in the Pathogenesis of Hepatitis B Virus-HBV

Current drug discovery involves finding leading drug candidates for further development. New scientific approaches include molecular docking, ADMET studies, and molecular dynamic simulation to determine targets and lead compounds. Hepatitis B is a disease of concern that is a life-threatening liver infection. The protein considered for the study was HBx. The hepatitis B X-interacting protein crystal structure was obtained from the PDB database (PDB ID-3MSH). Twenty ligands were chosen from the PubChem database for further in silico studies. The present study focused on in silico molecular docking studies using iGEMDOCK. The triethylene glycol monoethyl ether derivative showed an optimum binding affinity with the molecular target HBx, with a high negative affinity binding energy of −59.02 kcal/mol. Lipinski’s rule of five, Veber, and Ghose were followed in subsequent ADMET studies. Molecular dynamic simulation was performed to confirm the docking studies and to analyze the stability of the structure. In these respects, the triethylene glycol monoethyl ether derivative may be a promising molecule to prepare future hepatitis B drug candidates. Substantial research effort to find a promising drug for hepatitis B is warranted in the future.     

Theory of docking scores and its application to a customizable scoring function

In general, the docking scoring tends to have a size dependence related to the ranking of compounds. In this paper, we describe a novel method of parameter optimization for docking scores which reduce the size dependence and can efficiently discriminate active compounds from chemical databases. This method is based on a simplified theoretical model of docking scores which enables us to utilize large amounts of data of known active and inactive compounds for a particular target without requiring large computational resources or a complicated procedure. This method is useful for making scoring functions for the identification of novel scaffolds using the knowledge of active compounds for a particular target or a customized scoring function for an interesting family of drug targets.     

ALARM NMR: a rapid and robust experimental method to detect reactive false positives in biochemical screens

High-throughput screening (HTS) of large compound collections typically results in numerous small molecule hits that must be carefully evaluated to identify valid drug leads. Although several filtering mechanisms and other tools exist that can assist the chemist in this process, it is often the case that costly synthetic resources are expended in pursuing false positives. We report here a rapid and reliable NMR-based method for identifying reactive false positives including those that oxidize or alkylate a protein target. Importantly, the reactive species need not be the parent compound, as both reactive impurities and breakdown products can be detected. The assay is called ALARM NMR (a La assay to detect reactive molecules by nuclear magnetic resonance) and is based on monitoring DTT-dependent (13)C chemical shift changes of the human La antigen in the presence of a test compound or mixture. Extensive validation has been performed to demonstrate the reliability and utility of using ALARM NMR to assess thiol reactivity. This included comparing ALARM NMR to a glutathione-based fluorescence assay, as well as testing a collection of more than 3500 compounds containing HTS hits from 23 drug targets. The data show that current in silico filtering tools fail to identify more than half of the compounds that can act via reactive mechanisms. Significantly, we show how ALARM NMR data has been critical in identifying reactive compounds that would otherwise have been prioritized for lead optimization. In addition, a new filtering tool has been developed on the basis of the ALARM NMR data that can augment current in silico programs for identifying nuisance compounds and improving the process of hit triage.     

In silico-aided prediction of biological properties of chemicals: oestrogen receptor-mediated effects

In silico methods are a valid tool for analysing the properties of chemical compounds and interest in computational modelling techniques to predict the activity of chemicals is constantly growing. Many computational methods can be used to analyse the toxicity or biological activity of chemicals, particularly as regards their interactions with biological macromolecules (e.g. receptors) and other physico-chemical properties. An overview of these methods is provided in this tutorial review, with some examples of their application to predict oestrogen receptor (ER)-mediated effects. Nuclear receptors, particularly ER, have been studied with in silico tools since concern is growing about substances, called endocrine disrupters, that can interfere with hormone regulation. Molecular modelling techniques such as Quantitative Structure-Activity Relationships (QSAR), related methods like 3D-QSAR, and virtual docking have been used to investigate these phenomena and are described here. Implications about regulatory acceptance and use of these methods and the resulting models for identifying hazards and setting priorities are also addressed.     

Virtual screening using protein-ligand docking: avoiding artificial enrichment

This study addresses a number of topical issues around the use of protein-ligand docking in virtual screening. We show that, for the validation of such methods, it is key to use focused libraries (containing compounds with one-dimensional properties, similar to the actives), rather than "random" or "drug-like" libraries to test the actives against. We also show that, to obtain good enrichments, the docking program needs to produce reliable binding modes. We demonstrate how pharmacophores can be used to guide the dockings and improve enrichments, and we compare the performance of three consensus-ranking protocols against ranking based on individual scoring functions. Finally, we show that protein-ligand docking can be an effective aid in the screening for weak, fragment-like binders, which has rapidly become a popular strategy for hit identification. All results presented are based on carefully constructed virtual screening experiments against four targets, using the protein-ligand docking program GOLD.