“Short-bite” ligands in cluster synthesis

The short-bite ligands CH₂(PR ₂)₂ or CH(PR ₂)₃ (R = Me, Ph),RN(PX ₂)₂ (R=H, Me, Et;X = F, OR (R= Me, Et, i-Pr, Ph), Ph),RE(CH₂ ER₂)₂ (E = P, As;R = Me, Ph ), Ph₂ P(2-C₅H₄N) and related species are particularly versatile for the synthesis of di- and polynuclear complexes which frequently possess metal-metal bonds. In addition to homometallic products, these ligands often permit the directed synthesis of heterometallic complexes. Selected aspects of the chemistry of these complexes are also reviewed.     

Non-innocent ligands in bioinorganic chemistry—An overview

This review touches the most common instances where non-innocent (“suspect”) behaviour of redox-active ligands, either substrates or supporting components, is observed in a biochemical context. These ligands include the O₂/O₂^?/O₂^2?, NO⁺/NO/NO^?, o-quinone/o-semiquinone/catecholate and tyrosyl/tyrosinate redox systems, the tetrapyrrole (porphyrinic) ligands, the pterins and flavins, and the dithiolene/ene-dithiolate ligands in molybdo- and tungstopterin. These non-innocent ligands are discussed in their interaction with biological iron, copper, manganese, molybdenum or tungsten centers.     

Analysis of tertiary phosphanes, arsanes, and stibanes as bridging ligands in dinuclear Group 9 complexes

The unusual bridging and semi‐bridging binding mode of tertiary phosphanes, arsanes, and stibanes in dinuclear low‐valent Group 9 complexes have been studied by density functional methods and bonding analyses. The influence of various parameters (bridging and terminal ligands, metal atoms) on the structural preferences and bonding of dinuclear complexes of the general composition [A¹ M¹(μ‐CH₂)₂(μ‐EX₃)M² A²] (M¹, M²=Co, Rh, Ir; A¹, A²=F, Cl, Br, I, κ²‐acac; E=P, As, Sb, X=H, F, CH₃) has been analyzed. A number of factors have been identified that favor bridging or semi‐bridging modes for the phosphane ligands and their homologues. A more symmetrical position of the bridging ligand EX₃ is promoted by more polar E? X bonding, but by less electronegative (softer) terminal anionic ligands. Among the Group 9 metal elements Co, Rh, and Ir, the computations clearly show that the 4d element rhodium exhibits the largest preference for a {M¹(μ‐EX₃)M²} bridge, in agreement with experimental observation. Iridium complexes should be valid targets, whereas cobalt does not seem to support well a symmetric bridging mode. Analyses of the Electron Localization Function (ELF) indicate a competition between a delocalized three‐center bridge bond and direct metal–metal bonding.     

σ-Acceptor, Z-type ligands for transition metals

The ability of Lewis acids to coordinate to transition metals as σ-acceptor ligands was recognized as early as in the 1970's, but so-called Z-type ligands remained curiosities until the early 2000's. Over the last decade, significant progress has been made in this area, especially via the incorporation of Lewis acid moieties into multidentate, ambiphilic ligands. Our understanding of the nature and influence of TM → Z interactions has considerably improved and the scope of Lewis acids susceptible to behave as σ-acceptor ligands has been significantly extended. This feature article summarizes these recent achievements.     

P?N ligands in lanthanide chemistry

The coordination chemistry of inorganic amides in Group 3 and lanthanide chemistry is discussed. Three different ligand systems (phosphino‐amides, bis(phosphino)amides, and bis(phosphinimino)methanides) that consist of one or more P N units were used. In this series the steric demand of the ligands is increased in a stepwise fashion and the negative charge is delocalized over more atoms. These properties were used in the design of new lanthanide complexes. For all three compounds the synthesis of the alkali metal derivatives is reported first, followed by the reaction of the alkali metal salts with various lanthanide trichlorides. Further reactions of the obtained lanthanide complexes as well as their application as catalysts are discussed. Most of the reported complexes show a dynamic behavior in solution. In phosphinoamide and bis(phosphino)amide complexes, in which the phosphorus atom is in oxidation state +3, there is always a weak coordination of the phosphorus atom to the lanthanide atom observed. In bis(phosphinimino)methanide complexes, in which the phosphorus atom is in oxidation state +5, no such interaction is noticeable. Instead a weak coordination of the methine atom to the center metal can be seen in the solid state. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:514–520, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10096     

New chiral phosphine–amide ligands in palladium-catalysed asymmetric allylic alkylations

Palladium-catalysed asymmetric allylic alkylation of 1,3-diphenyl-2-propenyl acetate 8a with a dimethyl malonate–BSA–LiOAc system has been successfully carried out in the presence of new chiral phosphine–amide, such as 5, in good yields and high enantiomeric excesses of up to 85%.     

N-Picolinamides as ligands in Ullman type C–O coupling reactions

Copper-catalyzed modified Ullmann coupling reactions creating C–O bonds, including diaryl ethers or phenols, are vital to organic synthesis. Synthesized N-phenyl-2-pyridinecarboxamide and its derivatives were used as ligands in conjunction with catalytic copper sources in the formation of various diaryl ethers and phenols. Various aryl and heteroaryl halides with electron donating and withdrawing groups were reacted with various phenols under mild reaction conditions providing moderate to excellent yields.     

Addition of water across Si-Ir bonds in iridium complexes with κ-P,P,Si (biPSi) pincer ligands

Electrophiles such as Me(+), Ag(+), or protons react with the five-coordinate Ir(III) complex [IrClH(biPSi)] (biPSi = κ-P,P,Si-Si(Me){(CH(2))(3)PPh(2)}(2)) by abstracting its chloride ligand. The resulting species can be stabilized by a variety of L ligands to give the cationic complexes [IrH(biPSi)L(2)](+). The derivative [IrH(biPSi)(NCMe)(2)](+) has been subjected to a kinetic study regarding the facile dissociations of its acetonitrile ligands. The presence of water changes the course of the reaction producing dihydride complexes that contain the silanol ligand κ-O,P,P-HOSi(Me){(CH(2))(3)PPh(2)}(2) (biPSiOH). The water activation product [IrH(2)(biPSiOH)(NCMe)](CF(3)SO(3)) undergoes insertion reactions with ethylene and phenylacetylene. The use of hydrolyzable fluorinated counterions such as PF(6)(-) or BF(4)(-) further modifies the reaction by provoking the incorporation of fluoride at the silicon atom of the former biPSi ligand. The dihydride resulting after such a process, [IrH(2)(biPSiF)(NCMe)(2)]BF(4) (biPSiF = κ-P(2)-FSi(Me){(CH(2))(3)PPh(2)}(2)), displays a trans-chelating diphosphine ligand. When dehydrogenating the Ir center, spontaneously or using ethylene as hydrogen acceptor, the diphosphine backbone undergoes a Si-C bond cleavage leading to a new Ir(III) species with κ-P,Si and κ-C,P chelate ligands.     

Palladium complexes of P,P and P,S type bidentate ligands: Implication in Suzuki–Miyaura cross-coupling reaction

New palladium complexes of the type [PdCl₂(η²–P∩P)] (1a,1b) and [PdCl₂(η²–P∩S)] (1c,1d) have been synthesised by the reaction of PdCl₂ with P,P and P,S type bidentate ligands in 1:1 mol ratio, where, P∩P = 9,9–dimethyl-4,5-bis(diphenylphosphanyl) xanthene {Xantphos}(a) or bis(2-diphenylphosphanylphenyl)ether{DPEphos}(b); P∩S = 9,9-dimethyl-4,5-bis(diphenyl -phosphanyl) xanthenemonosulfide {Xantphos(S)}(c) or bis(2-diphenylphosphanyl phenyl) ether monosulfide {DPEphos(S)}(d). The complexes are characterized by elemental analyses, mass spectrometry, ¹H, ¹³C and ³¹P NMR spectroscopy together with the single crystal X-ray structure determination of 1a and 1d. The palladium atom in all the complexes occupies the centre of a slightly distorted square planar environment formed by a P atom, a P/S atom and two Cl atoms. The catalytic activities of 1a–1d investigated for Suzuki–Miyaura cross-coupling reactions at room temperature exhibit higher yield of the coupling products than catalysed by PdCl₂ itself. Among 1a–1d, the palladium complexes of bidentate phosphine (1a, 1b) show higher efficacy than their monosulfide analogues (1c, 1d). However, the recycling experiments with the catalysts for a selected coupling reaction between 4-bromobenzonitrile and phenylboronic acid exhibit that 1c and 1d are more efficient than 1a and 1b, which may be due to the donor effect of the P,S ligands during catalytic reaction.     

Palladium complexes of P,P and P,S type bidentate ligands: Implication in Suzuki–Miyaura cross-coupling reaction

New palladium complexes of the type [PdCl₂(η²–P∩P)] (1a,1b) and [PdCl₂(η²–P∩S)] (1c,1d) have been synthesised by the reaction of PdCl₂ with P,P and P,S type bidentate ligands in 1:1 mol ratio, where, P∩P = 9,9–dimethyl-4,5-bis(diphenylphosphanyl) xanthene {Xantphos}(a) or bis(2-diphenylphosphanylphenyl)ether{DPEphos}(b); P∩S = 9,9-dimethyl-4,5-bis(diphenyl -phosphanyl) xanthenemonosulfide {Xantphos(S)}(c) or bis(2-diphenylphosphanyl phenyl) ether monosulfide {DPEphos(S)}(d). The complexes are characterized by elemental analyses, mass spectrometry, ¹H, ¹³C and ³¹P NMR spectroscopy together with the single crystal X-ray structure determination of 1a and 1d. The palladium atom in all the complexes occupies the centre of a slightly distorted square planar environment formed by a P atom, a P/S atom and two Cl atoms. The catalytic activities of 1a–1d investigated for Suzuki–Miyaura cross-coupling reactions at room temperature exhibit higher yield of the coupling products than catalysed by PdCl₂ itself. Among 1a–1d, the palladium complexes of bidentate phosphine (1a, 1b) show higher efficacy than their monosulfide analogues (1c, 1d). However, the recycling experiments with the catalysts for a selected coupling reaction between 4-bromobenzonitrile and phenylboronic acid exhibit that 1c and 1d are more efficient than 1a and 1b, which may be due to the donor effect of the P,S ligands during catalytic reaction.     

Metrical oxidation states of 2-amidophenoxide and catecholate ligands: structural signatures of metal-ligand π bonding in potentially noninnocent ligands

Catecholates and 2-amidophenoxides are prototypical "noninnocent" ligands which can form metal complexes where the ligands are best described as being in the monoanionic (imino)semiquinone or neutral (imino)quinone oxidation state instead of their closed-shell dianionic form. Through a comprehensive analysis of structural data available for compounds with these ligands in unambiguous oxidation states (109 amidophenolates, 259 catecholates), the well-known structural changes in the ligands with oxidation state can be quantified. Using these correlations, an empirical "metrical oxidation state" (MOS) which gives a continuous measure of the apparent oxidation state of the ligand can be determined based on least-squares fitting of its C-C, C-O, and C-N bond lengths to this single parameter (a simple procedure for doing so is provided via a spreadsheet in the Supporting Information). High-valent d(0) metal complexes, particularly those of vanadium(V) and molybdenum(VI), have ligands with unexpectedly positive, and generally nonintegral, MOS values. The structural effects in these complexes are attributed not to electron transfer, but rather to amidophenoxide- or catecholate-to-metal π bonding, an interpretation supported by the systematic variation of the MOS values as a function of the degree of competition with the other π-donating groups in the structures.     

Hydrothermal syntheses,structures, and properties of four metal–organic coordination polymers assembled from V-shaped tetracarboxylate ligands and N-donor ancillary ligands

A series of four metal–organic frameworks, namely, [Cu(sdpa)_0.5(2,2′-bpy)]·H₂O (1), [Zn₂(sdpa)(2,2′-bpy)₂(H₂O)₂]·3H₂O (2), [Zn₂(sdpa)(4,4′-bpy)]·3H₂O (3), [Cd₂(sdpa)(4,4′-bpy)_1.5(H₂O)₂](4), have been hydro(solvo)thermally synthesized through the reaction of 2,3,2′,3′-sulfonyldiphthalic acid (H₄sdpa) with divalent copper, zinc and cadmium salts in the presence of ancillary nitrogen ligands (4,4′-bpy = 4,4′-bipyridine, 2,2′-bpy = 2,2′-bipyridine) and structurally characterized by elemental analysis, IR and X-ray diffraction. Both complex 1 and 2 show metal–organic chain structure, and the adjacent chains are further linked by π?π and C–H?π interactions for 1 and hydrogen bonds and π?π interactions for 2 to form 3D supramolecular structure. In complex 3, two Zn1 and two Zn2 atoms appear alternately and are bridged by sdpa⁴⁻ anion ligands to form an infinite Zn-sdpa chain. Such chains are further linked together through 4,4′-bpy ligands in four orientations to form a robust 3D metal–organic network. In compound 4, a 3D Cd-sdpa metal–organic network is accomplished through sdpa⁴⁻ anion ligands, and further stabilized by 4,4′-bpy in six orientations. Their luminescence and thermal analysis have also been investigated.     

Electronic tuning of chiral diene ligands in iridium-catalyzed asymmetric 1,6-addition of arylboroxines to δ-aryl-α,β,γ,δ-unsaturated ketones

Asymmetric addition of arylboroxines to δ-aryl-α,β,γ,δ-unsaturated ketones proceeded in the presence of an iridium catalyst coordinated with a chiral diene ligand to give high yields of δ-diaryl ketones with very high enantioselectivity.     

Intramolecular dehydrofluorinative coupling of η-arene and fluoroarylphosphine ligands in ruthenium complexes

NMR studies of reactions between a series of arene ruthenium(II) fluoroarylphosphine complexes and Proton Sponge have revealed the necessary conditions for intramolecular dehydrofluorinative ligand coupling. The complex must be cationic, and the phosphine need have only one fluoroaryl substituent. The reaction is rapid and clean for [(η⁶-toluene)RuCl(dfppe)]BF₄, [(η⁶-mesitylene)RuCl{(C₆F₅)₂PC₆H₄SMe}]BF₄ and the diastereomer of [(η⁶-toluene)RuCl{Ph₂PC₂H₄PPh(C₅F₄N-4)}]BF₄ in which the tetrafluoropyridyl substituent is close to the η⁶-arene. [(η⁶-p-cymene)RuCl(dfppe)]BF₄ reacts in the presence of Proton Sponge to give a mixture of unidentified compounds. The neutral complex [(η⁶-toluene)RuCl₂{Ph₂P(C₆F₅)}] and the diastereomer of [(η⁶-toluene)RuCl{Ph₂PC₂H₄PPh(C₅F₄N-4)}]BF₄ in which the tetrafluoropyridyl substituent is distant to the η⁶-arene do not undergo reaction.     

α-Pinene-type chiral Schiff bases as tridentate ligands in asymmetric addition reactions

A group of tridentate Schiff bases derived from (+)-α-pinene were synthesized. The steric effects in the transition state, the importance of π-π stacking interactions as well as the electronic effects of aryl aldehydes according to Hammett constant values in the enantioselective addition of Et₂Zn to aldehydes with the use of Schiff bases as chiral ligands are described. Also, a variety of aldehydes were cyanated using a catalyst prepared in situ from titanium tetraisopropoxide and chiral Schiff bases. The influence of a conjugated double-bond in the cyanation substrates on enantioselectivity was observed. The chemical structures of the chiral Schiff base-titanium alkoxide complexes are discussed based on their ¹H and ¹³C NMR spectra. 3D models of the Zn₂-complex catalyst and Ti-complex catalyst containing α-pinane-type Schiff bases based on X-ray diffraction experiments are postulated. The models presented were consistent with the reported chirality of the addition product and observed ee.     

Effect of chiral diene ligands in rhodium-catalyzed asymmetric addition of arylboronic acids to α,β-unsaturated sulfonyl compounds

Asymmetric addition of arylboronic acids to α,β-unsaturated sulfonyl compounds proceeded in the presence of a rhodium catalyst coordinated with a chiral diene ligand to give high yields of the addition products with high enantioselectivity (96->99.5% ee). The diene ligand was proved to be essential for the formation of the addition products, while the use of a bisphosphine ligand mainly gave the cine-substitution product.     

α,β-Divinyl tetrahydropyrroles as chiral chain diene ligands in rhodium(I)-catalyzed enantioselective conjugated additions

A series of α,β-divinyl tetrahydropyrroles, synthesized by asymmetric allylic C-H bond activation/conjugated diene addition reaction of ene-2-dienes, were found to be very efficient chiral chain diene ligands in the rhodium-catalyzed conjugated addition of organoboronic acids to various α,β-unsaturated compounds, achieving the desired chiral adducts with good to excellent yields and ee values.     

Synthesis,characterization, and photoluminescence properties of difluoroboron complexes with bis-β-diketone ligands

Some novel difluoroboron bis-β-diketonates containing a pyridyl moiety were synthesized from diethyl 2,6-pyridinedicarboxylate via Claisen condensation with the corresponding aryl methyl ketones and followed by complexation with boron trifluoride etherate. Their spectroscopic behaviors were studied by FTIR, ¹H NMR, UV–Vis, and fluorescence spectroscopic techniques. The results indicated that difluoroboron bis-β-diketonates exhibited violet or blue fluorescence emission at 428–454 nm under UV illumination in DMSO and possessed high extinction coefficients. It was found that the nature of the substituents at benzene ring in bis-β-diketone ligands had a significant impact on the photoluminescence behaviors of difluoroboron complexes. The complex 5b exhibited the strongest photoluminescence intensity and highest quantum yield (Φ _u = 0.93), due to two strong electron-donating methoxyl moieties in molecule and the compound 4b displayed the lowest photoluminescence intensity and quantum yield, assigned to the heavy atom effect of the chlorine atom in its molecule. The photoluminescence intensity and quantum yield of these difluoroboron complexes decreased in the sequence, 5b > 2b > 1b > 3b > 4b.     

Why are BINOL-based monophosphites such efficient ligands in Rh-catalyzed asymmetric olefin hydrogenation?

Whereas recent synthetic studies concerning Rh-catalyzed olefin hydrogenation based on BINOL-derived monodentate phosphites have resulted in an efficient and economically attractive preparative method, very little is known concerning the source of the unexpectedly high levels of enantioselectivity (ee often 90-99%). The present mechanistic study, which includes the NMR characterization of the precatalysts, kinetic measurements with focus on nonlinear effects, and DFT calculations, constitutes a first step in understanding this hydrogenation system. The two most important features which have emerged from these efforts are the following: (1) two monodentate P-ligands are attached to rhodium, and (2) the lock-and-key mechanism holds, in which the thermodynamics of Rh/olefin complexation with formation of the major and minor diastereomeric intermediates dictates the stereochemical outcome. The major diastereomer leads to the favored enantiomeric product, which is opposite to the state of affairs in classical Rh-catalyzed olefin hydrogenation based on chiral chelating diphosphines (anti lock-and-key mechanism as proposed by Halpern).     

Chiral sulfoxide–olefin ligands: tunable stereoselectivity in Rh-catalyzed asymmetric 1,4-additions

A class of chiral sulfoxide–olefins were designed and synthesized through concise routes. Their applications as ligands in Hayashi–Miyaura reaction were studied, which found that vinyl substituents of the ligands vary in stereocontrolling ability. Particularly, either isomer of adducts with excellent ees could be readily obtained through changing the position of the substituents of olefins as well as changing the configuration of the CC bond of the ligands. Meanwhile, the substrate scope of arylboronic acids and alkenes was clearly shown.