Molecular design of hybrid organic-inorganic materials with electronic properties

The synthesis of two classes of hybrid organic-inorganic nanocomposites with electronic properties is reported. One is made of PDMS units cross linked with vanadium oxo-species where the vanadium coordination depends on the hydrolysis pH. Tetrahedral coordination is retained at neutral pH, while acidic conditions promote the segregation of five coordinated vanadium oxo-species. The reduction process depends also on the vanadium coordination. The second system is made of siloxane T units and polypyrrole oligomers, grafted and interpenetrated at a nano size level.     

New luminescent europium(III) chelates for DNA labeling

The new europium(III) chelate [2,2',2',2'-[[4'-(aminobiphenyl-4-yl)-2,2':6',2'-terpyridine- 6,6'-diyl]bis(methylenenitrilo)]tetrakis(acetato)] europium(III) (ATBTA-Eu3+) and its 4,6-dichloro-1,3,5-triazinyl and succinimidyl derivatives (DTBTA and NHS-ATBTA, respectively) were synthesized and characterized. Both labeling complexes DTBTA-Eu3+ and NHS-ATBTA-Eu3+ are luminescent. Especially DTBTA-Eu3+ is strongly luminescent, with a luminescence quantum yield of 9.1%, molar extinction coefficient of 3.1 x 10(4) cm(-1) M(-1) (335 nm), and luminescence lifetime of 1.02 ms. The excitation and emission maximum wavelengths of DTBTA-Eu3+ are 335 and 616 nm, respectively. The complex is very stable in aqueous buffers, with a conditional formation constant log K(DTBTA-Eu) of 25.0 at pH 8, and can be conjugated to DNA and proteins. The chelates are also highly resistant to thermal decomposition, photodegradation, and ozone oxidation. These properties prove that DTBTA-Eu3+ is suitable as a luminescence label in DNA assays.     

Selective chemisorption of carbon monoxide by organic-inorganic hybrid materials incorporating cobalt(III) corroles as sensing components

Twenty-one hybrid materials incorporating cobalt(III) corrole complexes were synthesized by a sol-gel process or by grafting the metallocorrole onto a mesostructured silica of the SBA-15 type. All the materials show an almost infinite selectivity for carbon monoxide with respect to dinitrogen and dioxygen in the low-pressure domain where the chemisorption phenomenon is predominant. This peculiar property is of prime importance for an application as a CO sensor. The selectivity slightly decreases at high pressures where nonselective physisorption phenomena mainly occur. The percentage of active sites for CO chemisorption ranges from 22 to 64 %. This low percentage may be attributable to interactions between the cobalt(III) corroles with silanol or siloxane groups remaining at the surface of the materials which prevent further coordination of the CO molecule. Notably, the most efficient materials are those prepared in the presence of a protecting ligand (pyridine) during the gelation or the grafting process. The removal of this ligand after the gelation process releases a cavity around the cobalt ion that favors the coordination of a carbon monoxide molecule. The CO adsorption properties of the SBA-15 hybrid were not affected over a period of several months thus indicating a high stability of the material. Conversely, the xerogel capacities slowly decrease owing to the evolution of the material structure.     

Functional-template directed self-assembly (FTDSA) of mesostructured organic-inorganic hybrid materials

Since the discovery of a surfactant directed self-assembly approach for the fabrication of mesoporous silica in 1992, increasing attention has been focused on the design and synthesis of mesostructured functional materials. Organic functionalization is becoming a major topic in this research field, since highly ordered mesostructured organic-inorganic hybrids offer novel functionalities and enhanced performance over their individual components. We begin with a brief overview of the three fundamental methods (post-synthetic grafting technique, co-condensation method, and preparation of periodic mesoporous organosilicas) for the preparation of organically functionalized mesostructured silica, and focus on one of the most promising approaches, which herein was named as functional-template directed self-assembly (FTDSA) approach, and in the eyes of the authors it has a special position in the preparation of this class of hybrid materials. A comprehensive overview of the state of research in the area of FTDSA and its potential applications will be given.     

Photochemical behavior of luminescent compositions based on antimony(III) and europium(III) complexes in high-pressure polyethylene

Luminescent and photochemical properties of polymer compositions based on the Eu(NO₃)₃(Phen)₂ complex and complexes of antimony(III) halides with diphenylguanidine are investigated. It is found that high-pressure polyethylene (HPPE) containing europium(III) and antimony(III) complexes in combination exhibits efficient transfer of electronic excitation energy from antimony(III) levels to europium(III) levels and photosensitization of europium(III) luminescence. It is shown that the europium(III) and antimony(III) complexes increase the stability of HPPE to UV radiation.     

Auto-organisation of hybrid organic-inorganic materials prepared by sol-gel process

Silica-based hybrid organic-inorganic materials prepared by sol-gel chemistry exhibit chemical and physical properties revealing their anisotropic organisation. Besides the opportunities that this phenomenon opens for the preparation of new materials, it also provides arguments to the chemist looking for a better comprehension and control of the organisation of solids.     

Synthesis and luminescent properties of europium(III) and Terbium(III) complexes with acylated derivatives of 2-aminobenzoic acid

The optimal conditions for complex formation in solutions and synthesis of solid Eu(III) and Tb(III) complexes with acylated derivatives of aminobenzoic acid have been determined. The character and degree of effect of organic solvents, additional ligands, and surfactants on the complex photoluminescence intensity have been established.     

A europium(III) chelate as an efficient time-gated luminescent probe for nitric oxide

The first Eu(3+) chelate-based luminescent probe specific for nitric oxide (NO) has been designed and synthesized for highly sensitive and selective time-gated luminescence detection of NO. Based on the probe, a time-gated luminescence imaging technique was developed for imaging the endogenous NO production in living plant cells/tissues.     

Thermal degradation of epoxy-silica organic-inorganic hybrid materials

Degradation kinetics of organic-inorganic hybrid materials based on epoxy resin were investigated by thermogravimetric analysis (TGA). The hybrid materials were prepared from diglycidyl ether of bisphenol A (DGEBA) and 3-glycidyloxypropyltrimethoxysilane (GLYMO) polymerised simultaneously by poly(oxypropylene)diamine (Jeffamine D230). Nanometric level of homogeneity in the hybrids was verified by electron microscopy. Energy of activation of degradation for the hybrids with varying inorganic content, as well as for the unmodified epoxy-amine system, was determined by the isoconversional Kissinger-Akahira-Sunose method, and was found to be significantly higher for the hybrid materials than for the unmodified epoxy-amine system. The degradation process was described by empirical kinetic models. The results indicated that presence of the inorganic network influences the mechanism of degradation of organic phase. Greater thermal stability of hybrid materials was confirmed by other parameters obtained from TGA curves.     

The supramolecular chemistry of organic-inorganic hybrid materials

The combination of nanomaterials as solid supports and supramolecular concepts has led to the development of hybrid materials with improved functionalities. These "hetero-supramolecular" ideas provide a means of bridging the gap between molecular chemistry, materials sciences, and nanotechnology. In recent years, relevant examples have been reported on functional aspects, such as enhanced recognition and sensing by using molecules on preorganized surfaces, the reversible building of nanometer-sized networks and 3D architectures, as well as biomimetic and gated chemistry in hybrid nanomaterials for the development of advanced functional protocols in three-dimensional frameworks. This approach allows the fine-tuning of the properties of nanomaterials and offers new perspectives for the application of supramolecular concepts.     

Selective complex formation of saccharides with europium(III) and iron(III) ions at alkaline pH studied by ligand-exchange chromatography

At high pH, saccharides become negatively charged by deprotonation of one or several hydroxylic groups and they are highly and selectively retained by ligand-exchange chromatography. The systems consist of a sulphonated polystyrene strong cation exchanger in europium(III) or iron(III) form and sodium hydroxide as mobile phase. The degree of complex formation is dependent on solute character and concentration, metal ion and pH, the reaction being of second order as confirmed by breakthrough studies. Rapid desorption of the solutes is performed by the introduction of an acidic mobile phase. Monosaccharides, and especially sugar alcohols, are selectively retained by a column in Fe(III) form whereas all saccharides are strongly retained as Eu(III) complexes, e.g., the capacity factor for the breakthrough of 10 μM glucose, in 0.1 M NaOH as mobile phase, was ca. 3500 The systems are proposed to be highly selective for the analysis of sugars.     

Catalysis by methyltrioxorhenium(VII): reduction of hydronium ions by europium(II) and reduction of perchlorate ions by europium(II) and chromium(II)

The title reactions occur stepwise, the first and fastest being MeReO3 + Eu2+ --> Re(VI) + Eu3+ (k298 = 2.7 x 10(4) L mol(-1) s(-1)), followed by rapid reduction of Re(VI) by Eu2+ to MeReO2. The latter species is reduced by a third Eu2+ to Re(IV), a metastable species characterized by an intense charge transfer band, epsilon410 = 910 L mol(-1) cm(-1) at pH 1; the rate constant for its formation is 61.3 L mol(-1) s(-1), independent of [H+]. Yet another reduction step occurs, during which hydrogen is evolved at a rate v = k[Re(IV)][Eu2+][H+](-1), with k = 2.56 s(-1) at mu = 0.33 mol L(-1). The 410 nm Re(IV) species bears no ionic charge on the basis of the kinetic salt effect. We attribute hydrogen evolution to a reaction between H-ReVO and H3O+, where the hydrido complex arises from the unimolecular rearrangement of Re(III)-OH in a reaction that cannot be detected directly. Chromium(II) ions do not evolve H2, despite E(Cr) degrees approximately E(EU) degrees. We attribute this lack of reactivity to the Re(IV) intermediate being captured as [Re(IV)-O-Cr(III)]2+, with both metals having substitutionally inert d3 electronic configurations. Hydrogen evolution occurs in chloride or triflate media; with perchlorate present, MeReO2 reduces perchlorate to chloride, as reported previously [Abu-Omar, M. M.; Espenson, J. H. Inorg. Chem. 1995, 34, 6239-6240].     

Molecular dynamics study of the hydration of lanthanum(III) and europium(III) including many-body effects

Lanthanides complexes are widely used as contrast agents in magnetic resonance imaging (MRI) and are involved in many fields such as organic synthesis, catalysis, and nuclear waste management. The complexation of the ion by the solvent or an organic ligand and the resulting properties (for example the relaxivity in MRI) are mainly governed by the structure and dynamics of the coordination shells. All of the MD approaches already carried out for the lanthanide(III) hydration failed due to the lack of accurate representation of many-body effects. We present the first molecular dynamics simulation including these effects that accounts for the experimental results from a structural and dynamic (water exchange rate) point of view.     

The first synthesis of organic-inorganic hybrid materials with chiral bis(oxazoline) ligands

Condensation of tetraethoxysilane with silane-functionalized bis(oxazolines) in the presence of dodecylamine leads to hybrid materials whose textural and catalytic properties depend on both the ligand and the spacer structure.     

以钴-哒嗪阳离子为模板构筑的多酸基有机-无机杂化材料

利用水热方法合成了一种Keggin型多酸基有机无机杂化材料,化学式为(Hpydz)Na[Co(pydz)_4(H_2O)_2][SiW_(12)O_(40)]·3H_2O(pydz=pyridazine).单晶X-射线研究表明,在该化合物中,Keggin型多阴离子与钠离子连接构筑成三维孔状结构,其中钴-哒嗪阳离子有机基团作为客体分子,通过静电相互作用存在于三维孔道结构中,构筑成有机-无机杂化材料.该化合物属于单斜晶系,空间群为C_2/c,晶胞参数a=1.937 7(2)nm,b=1.678 8(2)nm,c=1.768 0(2)nm,α=90°,β=98.612(3)°,γ=90°,V=5.686 51nm~3.     

Cobalt(II) octacyanotungstate(V) organic-inorganic hybrid ferromagnetic materials with pyrazine and 4,4'-bipyridine

Two new ferromagnetic organic-inorganic hybrid materials [Co(II)3(H2O)6(pyz)3[W(V)(CN)8]2].3.5H2O (1) and [Co(II)3(H2O)4(4,4'-bpy)3[W(V)(CN)8]2].1.5(4,4'-bpy).6H2O (2) have been synthesised and characterised. The structure of the compounds have been investigated combining EXAFS (extended X-ray absorption fine structure), ES-MS (electrospray mass spectrometry), IR (infrared spectroscopy), UV-VIS electronic spectroscopy and TGA (thermogravimetric analysis) coupled with QMS (quadrupole mass spectrometer) experiments. The studies reveal that both compounds consist of Co(II)-NC-W(V) and Co(II)-L-Co(II) linkages (L = pyrazine (1) or 4,4-bipyridine (2)). Both networks are created by cyano-bridged Co(II)3W(V)2 chains joined by organic linkers into a 2D architecture. A difference of cobalt coordination numbers in both compounds derived from EXAFS study is consistent with the ES-MS conclusion. The ac magnetic characterisation exhibits the transition to the ferromagnetic phase at T(C) = 26 K (1) and to the spin glass-like phase at T(G) = 16 K (2). The frequency dependent chi'(T) and chi'(T) signals indicate the presence of some disorder in spin alignment below ordering temperatures. Both networks are also characterised a by magnetic hysteresis loop of coercive field H(c) = 750 Oe (1) and 1200 Oe (2) at T = 4.2 K.     

Synthesis of polymeric organic-inorganic hybrid materials. Partially deacetylated chitin-silica hybrid

This work reports the synthesis of a novel polymeric organic-inorganic hybrid. The inorganic component is a silica network obtained by controlled hydrolysis of tetraethyl orthosilicate via sol-gel process and the organic counterpart is partially deacetylated chitin (CHI). The resulting polymer hybrids were homogeneous transparent film forming glassy materials being compatible through a wide composition range. Simultaneous thermal analysis of a CHI/silica 1:1 mixture confirms the intermolecular complex formation between organic and inorganic polymers.     

A triboluminescent europium(III) complex

The crystal structure of (4,4′‐di­methyl‐2,2′‐bipyridyl)­tris­[3,3,3‐tri­fluoro‐1‐(2‐thenoyl)propan‐2‐onato]­europium(III), or more commonly (4,4′‐dimethyl‐2,2′‐bipyridyl)tris(2‐thenoyltrifluoro­acetonato)europium(III), [Eu(C₈H₄F₃O₂S)₃(C₁₂H₁₂N₂)], has been determined. Crystals of the complex emit vivid red light when scratched or fractured. This triboluminescent activity seems to correlate with the non‐centrosymmetric crystal structure and disorder of the thienyl rings and CF₃ groups which is present here and in similar compounds. While modeling the thienyl‐ring disorder, it was noted that the bond angle at the C atom replaced by S is a sensitive sign of even small rotational ring disorder. The coordination geometry of the Eu^III ion can be described as square antiprismatic, with coordination by the six O atoms of the three chelating β‐diketonate ligands and the two N atoms of the neutral bipyridyl ligand.