Synthesis and spectroscopic characterization of cobalt(II) thiosemicarbazone complexes

Thiosemicarbazone derivatives are formed on reaction between acetophenone, salicylaldehyde, benzophenone and/or 2-hydroxy-4-methoxybenzophenone and thiosemicarbazide or its N⁴H substituents (ethyl-, phenyl-, and p-chlorophenyl-). The ligands were investigated by elemental analysis and spectral (IR, ¹H?NMR and MS) studies. The formulas of the prepared complexes have been suggested by elemental analyses and confirmed by mass spectra. The coordination sites of each ligand were elucidated using IR spectra revealing bidentate and tridentate coordination. Different geometries for the complexes were proposed on the basis of electronic spectra and magnetic measurements. The complexes have been analyzed thermally (TG and DTG) and the kinetic parameters for some of their degradation steps were calculated.     

Monitoring of the insecticide trichlorfon by phosphorus-31 nuclear magnetic resonance (31P NMR) spectroscopy

Trichlorfon is an organophosphorus insecticide, which is extensively being used for protection of fruit crops. Trichlorfon is a thermal labile compound, which cannot be easily determined by gas chromatography (GC) and has no suitable group for sensitive detection by high performance liquid chromatography (HPLC). In this study, a ³¹P nuclear magnetic resonance (³¹P NMR) has been described for monitoring of trichlorfon without any separation step. The quantitative works of ³¹P NMR spectroscopy has been performed in the presence of an internal standard (hexamethylphosphoramide). Limit of detection (LOD) for this method has been found to be 55 mg L⁻¹, without any sample preparation, and the linear working range was 150-5500 mg L⁻¹. Relative standard deviation (R.S.D.%) of the method for three replicates within and between days was obtained ≤9%. The average recovery efficiency was approximately 99-112%. This method was applied for monitoring trichlorfon in a commercial insecticide sample and tomato sample.     

NMR spectroscopic characterization of copper(II) and zinc(II) complexes of indomethacin

Molecular diffusion constants were studied by NMR spectroscopy to provide information about the solution structures of a variety of Cu(II) and Zn(II) monomeric and dimeric complexes of indomethacin (IndoH). These studies showed that monomeric Zn(II)-Indo complexes substantially dimerize in DMF-d7 and DMSO-d6 solutions at room temperature, whereas the Cu(II) and Zn(II) dinuclear complexes remain largely intact in these solutions. There is evidence of an equilibrium between monomers and dimers for the Zn(II) complexes in solution, as shown by a reduced diffusion constant and lower average radius compared to the Cu(II) dimer. Such an equilibrium between monomers and dimers for the Zn(II) complexes is also consistent with previous results obtained from XAFS analysis of DMF solutions of such complexes. The greater lability and lower thermodynamic stability of the Zn(II) dimer complex compared to the Cu(II) analogue, as determined from the NMR experiments, is likely to result in the more ready release of free Indo in the GI tract. This is consistent with the previously observed higher GI toxicities of the Zn-Indo pharmaceutical preparations compared to the Cu(II)-Indo counterparts.     

Diazabutadiene cobalt(II) complexes

Summary Studies on the chelates of cobalt(II) with the bidentate ligands 1,4-diphenyl(2,3-dimethyl-1,4-diazabutadiene) (PMB) and 1,4-di(p-methoxyphenyl)-2,3-dimethyl-1,4-diazabutadiene (MPMB) have been carried out. On the basis of elemental analyses, the complexes are [Co(PMB)Cl₂], [Co(PMB)₂(C1O₄)₂], [Co(MPMB)Cl₂] and [Co(MPMB)₂(ClO₄)₂].Both ligands are bidentatevia nitrogen atoms in all the complexes. The magnetic susceptibility and i.r. and u.v.-visible spectra are reported and discussed. The chloro-compounds involving two chlorine ligands and, in the perchlorate compounds, the ClO ₄ ^– groups are bound to the cobalt(II) centre.     

Catalytic olefin hydrogenation by platinum(II)/tin(II) systems supported on phosphinated polystyrenes: a solid-state phosphorus-31 NMR study

Polymer-supported platinum(II) phosphine complexes have been prepared by the reaction of phosphinated polystyrenes with [PtCl₂(NCPh)₂] and by the direct terpolymerization of styrene, divinylbenzenes, and cis-[PtCl₂L₂] (L = p-styryldiphenylphosphine). The polymer-supported complexes have been fully characterized by solid-state phosphorus-31 NMR spectroscopy employing cross-polarization, magic angle spinning, and high power proton decoupling techniques and by elemental analysis. Samples of these polymer-supported complexes containing 10, 15, and 30% cross-linking have been employed in the tin(II) chloride co-catalyzed hydrogenation of styrene, using either methylene chloride or acetone as the reaction medium. Following catalysis, the polymer-supported complexes were examined by soild-state phosphorus-31 NMR spectroscopy to determine structural changes. Comparison with spectroscopic data obtained for analogous homogeneous systems allow insight into the catalytic chemistry.     

Synthesis and characterization of zinc(II) and cobalt(III) Schiff base complexes

Two mononuclear complexes with the Schiff base ligand 2-((2-(dimethylamino)ethylimino)methyl)phenol (HL), namely ZnL₂ and CoL₂(N₃), have been synthesized and characterized using single-crystal X-ray diffraction and spectroscopy (IR, ¹H NMR, UV–Vis, MS and EA). Both complexes are mononuclear. The coordination geometry in the Zn(II) complex is distorted square-pyramidal with a weak Zn···N interaction. The Co(III) complex is distorted octahedral, and the neutral molecule unit [Co^IIIL₂(N₃)] is connected by C–H···N hydrogen bonds to form a one-dimensional infinite chain. The luminescence of the zinc compound has been investigated. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Synthesis, characterization and magnetism of binuclear cobalt (II) complexes bridged by tetracarboxylato groups

Three new binudear cobalt (II) complexes with extended te-tracarboxylato- bridge have been synthesized and characterized, namely [Co2 (PMTA) (bpy)4] (1), [Co2(PMTA)-(phen)4] (2) and [Co2(PMTA) (NO2phen)4] (3), where PMTA represents the tetraanion of pyroniellitic acid, and bpy, phen, NO2-phen denote 2,2'-bipyridine, 1,10-phenan-throline; 5-nirto-1, 10-plienanthroline, respectively. Based on elemental analyses, molar conductivity measurements, IR and electronic spectra studies, it is proposed that these complexes have PMTA-bridged structures and consist of two cobalt (II) ions, each in a distorted octahedral environment. These complexes were further characterized by variable temperature magnetic susceptibility measurements (4-300 K) and the observed data were successfully simulated by the equation based on the spin Hamiltonian operator, giving the exchange integral J = - 1.02 cm-1 for 1, J = -1.21 cm-1 for 2 and J = - 1.18 cm-1 for 3, respectively. These results revealed the operation of antiferromagneti     

Nickel(II) and cobalt(II) complexes of rhodanine

Summary Nickel(II) and cobalt(II) complexes of rhodanine (Hrd) were prepared from the metal chloride or acetate and the ligand. With an excess of NH3, the octahedral [Ni(NH₃)₆](Rd)₂ and [Co(NH₃)₅Rd]Rd complexes are ob-tained; use of only two NH₃ equivalents per metal ion yields the Ni(Rd)₂ sd HRd · NH₃ and [Co(Rd)₂ ] · 1.5 H₂O complexes, the first with tetragonally distorted hexacoordination and the second with polymeric octahedral coordination. By using two equivalents of NaOH per metal ion, the binuclear [Ni(Rd)₂][Ni(Rd)₂ · (HRd)₂] · 2 H₂O complex is formed having one diamagnetic planar and one high spin octahedral chromophore. Rhodanine is coordinated through the thiocarbonylic sulphur in the neutral form and through the thiocarbonylic sulphur and the deprotanated nitrogen atoms in the rhodanidato anionic form.     

Cymantrenecarboxylate complexes of nickel(II) and cobalt(II)

Reactions of cymantrenecarboxylic acid (CO)₃MnC₅H₄COOH (CymCOOH) with Ni(II) and Co(II) pivalates in boiling THF followed by extraction of the products with diethyl ether or benzene and treatment with triphenylphosphine gave the binuclear complexes LM(CymCOO)₄ML (M = Ni (I) and Co (II); L = PPh₃). Treatment of the benzene extract of the intermediate cobalt cymantrenecarboxylate with 2,6-lutidine (L’) yielded the trinuclear complex L’Co(CymCOO)₃Co(CymCOO)₃CoL’ (III). Complex I is antiferromagnetic; μ_eff decreases from 3.7 to 0.9 μ_B in a temperature range from 300 to 2 K. Structures I-III were identified using X-ray diffraction. The frameworks of complexes I and II are like Chinese lanterns, having four carboxylate bridges and axial ligands L (Ni-P, 2.358(1) Å; Co-P, 2.412(2) Å). The metal atoms are not bonded to each other (Ni…Ni, 2.7583(9) Å; Co…Co, 2808 (2) Å). In complex III, either terminal Co atom is coordinated to one ligand L’ (Co-N, 2.059(2) Å). The Co atoms form a linear chain showing no M-M bonds (Co…Co, 3.346(1) Å), in which either terminal Co atom is linked with the central Co atom by three carboxylate bridges (on average, Co_centr-O, 2.164 Å; CO_term-O, 2.094 Å). In one of three carboxylate groups, only one carboxylate O atom serves as a bridge, while the other is bonded to the terminal Co atom only (Co_term-O, 2.094 and 2.389 Å); so this carboxylate group is a bridging and chelating ligand.     

Synthesis and characterization of cobalt(II) and copper(II) complexes with 5-amino-3,4-dimethylisoxazole

Summary Complexes of cobalt(II) and copper(II) with 5-amino-3,4-dimethylisoxazole (5-ADI) have been prepared and studied by means of magnetic susceptibility measurements, near and far i.r. spectra, electronic spectroscopy and, when possible, conductivity measurements. The 5-ADI generally behaves as bridging (N_ring-, O- or N_ring-, -NH₂) ligand. All the complexes have an octahedral sterochemistry, except Co(5-ADI)₂X₂ (X = Cl, Br), Co₂(5-ADI)₇I₄ which are tetrahedral and Cu(5-ADI)₂ (ClO₄)₂ · 4 H₂O which is square planar.     

Synthesis and characterization of cobalt(II) complexes with tripodal polypyridine ligand bearing pivalamide groups. Selective formation of six- and seven-coordinate cobalt(II) complexes

The reactions of CoX(2) (X = Cl(-), Br(-), I(-) and ClO(4)(-)) with the tripodal polypyridine N(4)O(2)-type ligand bearing pivalamide groups, bis(6-(pivalamide-2-pyridyl)methyl)(2-pyridylmethyl)amine ligand (H(2)BPPA), afforded two types of Co(II) complexes as follows. One type is purple-coloured Co(II) complexes, [CoCl(2)(H(2)BPPA)] (1(Cl)) and [CoBr(2)(H(2)BPPA)] (1(Br)) which were prepared when X = Cl(-) and Br(-), respectively. The other type is pale pink-coloured Co(II) complexes, [Co(MeOH)(H(2)BPPA)](ClO(4)(-))(2) (2·(ClO(4)(-))(2)) and [Co(MeCN)(H(2)BPPA)](I(-))(2) (2·(I(-))(2)), which were obtained when X = I(-) and ClO(4)(-), respectively. From the reaction of 1(Cl) and NaN(3), a purple-coloured complex, [Co(N(3))(2)(H(2)BPPA)] (1(azide)), was obtained. These Co(II) complexes were characterized by X-ray structural analysis, IR and reflectance spectroscopies, and magnetic susceptibility measurements. All these Co(II) complexes were shown to be in a d(7) high-spin state based on magnetic susceptibility measurements. The former Co(II) complexes revealed a six-coordinate octahedron with one amine nitrogen, three pyridyl nitrogens, and two counter anions, and one coordinated anion, Cl(-), Br(-) and N(3)(-), forming intramolecular hydrogen bonds with two pivalamide N-H groups. On the other hand, the latter Co(II) complexes showed a seven-coordinate face-capped octahedron with one amine nitrogen, three pyridyl nitrogens, two pivalamide carbonyl oxygens and MeCN or MeOH. In these structures, intramolecular hydrogen bonding interaction was not observed, and the metal ion was coordinated by the pivalamide carbonyl oxygens and solvent molecule instead of the counter anions. The difference in coordination geometries might be attributable to the coordination ability and ionic radii of the counteranions; smaller strongly binding anions such as Cl(-), Br(-) and N(3)(-) gave the former complexes, whereas bulky weakly binding anions such as I(-) and ClO(4)(-) afforded the latter ones. In order to demonstrate this hypothesis, the small stronger coordinating ligand, azide, was added to complexes 2·(ClO(4)(-))(2) to obtain the dinuclear cobalt(II) complex in which two six-coordinate octahedral cobalt(II) species were bridged with azide, 3·(ClO(4)(-)). Also, the abstraction reaction of halogen anions from complexes 1(Cl) by AgSbF(6) gave a pale pink Co(II) complex assignable to 2·(SbF(6)(-))(2).     

Synthesis and crystal structures of two new Schiff base cobalt(II) and nickel(II) complexes

The Schiff base ligand (HL) obtained from phenylmethanamine and 5-methoxysalicylaldehyde are used as ligands for Co(II) and Ni(II) resulting in complexes [Co(L)₂] (I) and [Ni(L)₂] (II), and their solid state structures were determined by X-ray crystallography. In both complexes, weak interactions play an important role in the molecular self-assembly. Complex I was stacked up to the 2D layers by C-H…O hydrogen bonds and C-H…π interactions. In contrast, complex II was extended into 2D sheet by C-H…O hydrogen bonds, the C-H…π interactions, and edge-to-face interactions.     

Synthesis and characterization of copper(II), nickel(II) and cobalt(II) complexes with novel thiourea derivatives

A novel series of thiourea derivatives, namely, N,N-diphenyl-N-(4-phenyl-benzoyl)thiourea (HL¹), N,N-diphenyl-N-(4-chloro-benzoyl)thiourea (HL²) and N,N-di-n-propyl-N-(4-chloro-benzoyl)thiourea (HL³), and its metal complexes has been prepared and characterised by elemental analysis, i.r. spectroscopy, ¹H-n.m.r. spectroscopy, mass spectrometry and single crystal X-ray diffraction. The ligand coordinates to Ni^II, Cu^II and Co^II in a bidentate manner yielding essentially neutral complexes of the type cis-[ML₂]. N.m.r. spectra and single crystal X-ray diffraction analysis revealed the presence of a distorted tetrahedral coordination ML₂ complex.     

Bis(2-pyridylimino)isoindolato iron(II) and cobalt(II) complexes: structural chemistry and paramagnetic NMR spectroscopy

Condensation of phthalodinitrile and 2-amino-5,6,7,8-tetrahydroquinoline gave the bis(2-pyridylimino)isoindole protioligand 1 (thqbpiH) in high yield. Deprotonation of thqbpiH (1) using LDA in THF at -78 °C yields the corresponding lithium complex [Li(THF)(thqbpi)] (2) in which the lithium atom enforces almost planar arrangement of the tridentate ligand, with an additional molecule of THF coordinated to Li. Reaction of cobalt(II) chloride or iron(II) chloride with one equivalent of the lithium complex 2 in THF led to formation of the metal complexes [CoCl(THF)(thqbpi)] (3a) and [FeCl(THF)(thqbpi)] (3b). The paramagnetic susceptibility of 3a,b in solution was measured by the Evans method (3a: μ(eff) = 4.17 μ(B); 3b: μ(eff) = 5.57 μ(B)). Stirring a solution of 1 and cobalt(II) acetate tetrahydrate in methanol yielded the cobalt(II) complex 4 which was also accessible by treatment of 3a with one equivalent of silver or thallium acetate in DMSO. Whereas 3a,b were found to be mononuclear in the solid state, the acetate complex 4 was found to be dinuclear, the two metal centres being linked by an almost symmetrically bridging acetate. For all transition metal complexes paramagnetic (1)H as well as (13)C NMR spectra were recorded at variable temperatures. The complete assignment of the paramagnetic NMR spectra was achieved by computation of the spin densities within the complexes using DFT. The proton NMR spectra of 3a and 3b displayed dynamic behaviour. This was attributed to the exchange of coordinating solvent molecules by an associative mechanism which was analysed using lineshape analysis (ΔS(≠)= -154 ± 25 J mol(-1) K(-1) for 3a and ΔS(≠) = -168 ± 15 J mol(-1) K(-1) for 3b).     

Allylation and oxidation reactions promoted by cobalt(II) complexes

Two examples of radical reactions involving cobalt complexes are described. The first one concerns the reactions of allylcobaloximes with 2-bromo 2-phenylacetonitriles leading to the corresponding monoallyl derivatives. It is shown that both the rate and regioselectivity of the reactions are affected by the nature of the substituents on the phenyl group: electron-withdrawing groups give higher rates and highly regiospecific reactions. The second type of radical reaction which finds useful synthetic applications is the oxidation of phenols by 02 catalyzed by Schiff base cobalt complexes. By choosing carefully the catalyst and the solvent, these oxidations can be highly selective, quinones being the major oxidation products in most cases.     

Synthesis and characterization of copper(II), cobalt(II), nickel(II), and iron(III) complexes with two diamine Schiff bases and catalytic reactivity of a chiral diamine cobalt(II) complex

New transition metal complexes of Co(II), Cu(II), Ni(II), and Fe(III) of the ligands 6,6′-(1E,1′E)-(4,5-dimethyl-1,2-phenylene)bis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(7-hydroxy-5-methoxy-2-methyl-4H-chromen-4-one) H₂L¹ and 6,6’-(1E,1′E)-cyclohexane-1,2-diylbis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(7-hydroxy-5-methoxy-2-methyl-4H-chromen-4-one) H₂L² have been prepared and characterized using physio-chemical and spectroscopic methods. The results obtained for the complexes indicated that the geometries of the metal centres are either square planar or octahedral. Cyclopropanation reactions of unactivated olefins by ethyldiazoacetate (EDA) in the presence of [L¹Cu]·H₂O, [L²Cu]·2H₂O and [L²*Co]·2H₂O as catalysts were examined. The results showed that only [L²*Co]·2H₂O can act as a catalyst for the cyclopropanation reaction of unactivated olefins with very high selectivity (up to 99% based on EDA).     

Synthesis,characterization and catalytic activity of halo-methyl-bis(salicylaldehyde)ethylenediamine cobalt(II) complexes

The synthesis, characterization and catalytic activity of a series of tetra-halo-dimethyl salen and di-halo-tetramethyl-salen ligands are reported in this paper: α,α′-dimethyl-Salen (dMeSalen) (L¹); 3,3′,5,5′-tetrachloro-α,α′-dimethyl-Salen, (tCldMeSalen) (L²); 3,3′-dibromo-5,5′-dichloro-α,α′-dimethyl-Salen, (dCldBrdMeSalen) (L³); 3,3′,5,5′-tetrabromo-α,α′-dimethyl-Salen, (tBrdMeSalen) (L⁴); 3,3′,5,5′-tetraiodo-α,α′-dimethyl-salen, (tIdMeSalen) (L⁵); 3,3′-dichloro-5,5′,α,α′-tetramethyl-Salen (dCltMeSalen) (L⁶); 3,3′-dibromo-5,5′,α,α′-tetramethyl-Salen (dBrtMeSalen) (L⁷); and 3,3′-diiodo-5,5′,α,α′-tetramethyl-Salen (dItMeSalen) (L⁸) (Salen = bis(salicylaldehyde)ethylenediamine). Upon reaction with Co(II) ions, these ligands form complexes with square planar geometry that have been characterized by elemental analysis, cyclic voltammetry, UV–Vis, IR and EPR spectroscopies. In the presence of pyridine the obtained Co(II) complexes were found able to bind reversibly O₂, which was shown by EPR spectroscopy and cyclic voltammetry. They were also found able to catalyze the oxidation of 2,6-di-tert-butylphenol (DtBuP) (9) with formation of 2,6-di-tert-butyl-1,4-benzoquinone (DtBuQ) (10) and 2,6,2′,6′-tetra-tert-butyl-1,1′-diphenobenzoquinone (TtBuDQ) (11). These properties are first influenced by the coordination of pyridine in axial position of the Co(II) ion that causes an increase of the electronic density on the cobalt ion and as a consequence a decrease in the E_1/2 value and an increase of the reducing power of the Co(II) complex. It is noteworthy that, under those conditions the complexes also show a remarkable quasi-reversible behaviour. Second, complex properties are also influenced by the substituents (methyl and halogen) grafted on the aromatic ring and on the azomethynic groups. The donating methyl substituent on the azomethynic groups causes a decrease in the E_1/2 value, whereas the halogen substituents on the aromatic rings have two effects: a mesomeric donating effect that tends to lower the redox potential of the complex, and a steric effect that tends to decrease the conjugation of the ligand and then to increase the redox potential of the Co(II) complex. In pyridine, the steric effect predominates, which causes both an increase of the redox potential and a decrease of the selectivity of the oxidation of phenol 9. As a result of all these effects, it then appears that the best catalysts to realize the selective oxidation of 2,6-di-tert-butyl-phenol (9) by O₂ are the Co complexes of ligands bearing CH₃ donating substituents, Co(dMeSalen) 1 (2CH₃ substituents), and Co-di-halo-tetra-methyl-salen complexes 6, 7 and 8 (4CH₃ substituents), in the presence of pyridine.     

Some new cobalt(II) complexes: Synthesis,characterization and thermal studies

Cobalt(II) complexes of tetradentate Schiff bases of the type CoL [H₂L=C₂₀H₁₆N₂O₂ (H₂dsp), C₂₁H₁₈N₂O₂ (H₂dst), C₂₀H₁₅N₃O₄ (H₂ndsp) and C₁₆H₁₆N₂O₂ (H₂salen)] have been synthesized and characterized by UV-visible, IR, and magnetic studies. Various thermodynamic parameters have been calculated for the decomposition step using TG/DTA. C₂₀H₁₄N₂O₂Co complex has the minimum and C₁₆H₁₄N₂O₂Co complex has the maximum activation energy.This revised version was published online in November 2005 with corrections to the Cover Date.