Visualization of the Heterogeneity of Cerium Oxidation States in Single Pt/Ce2Zr2Ox Catalyst Particles by Nano‐XAFS

The cerium oxidation states in single catalyst particles of Pt/Ce₂Zr₂O_x (x=7 to 8) were investigated by spatially resolved nano X‐ray absorption fine structure (nano‐XAFS) using an X‐ray nanobeam. Differences in the distribution of the Ce oxidation states between Pt/Ce₂Zr₂O_x single particles of different oxygen compositions x were visualized in the obtained two‐dimensional X‐ray fluorescent (XRF) mapping images and the Ce L_III‐edge nano X‐ray absorption near‐edge structure (nano‐XANES) spectra.     

AuN films – structure and chemical binding

AuN films were produced on 304 stainless steel using an arc‐pulsed – assisted plasma physical vapor deposition system. The deposition was performed using an Au target in a nitrogen atmosphere at different pressures. The films were characterized using x‐ray photoelectron spectroscopy and x‐ray diffraction. A 398.1‐eV binding energy was observed and assigned to gold nitride species. The x‐ray diffraction patterns displayed a crystallographic structure that corresponded to the Au‐fcc phase with broad diffraction lines. The observed widening of the Bragg diffraction lines (rocking curves) can be attributed to the presence of interstitial nitrogen atoms in the Au‐fcc structure. Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of local structure on local electric field in Island‐like silver films

The infrared absorption enhancement phenomenon in the normal configuration of vacuum‐evaporated metal films on a transparent substrate is known to depend not only on the metal film morphology but also on the local structures of metal particles. To date, however, few studies have examined the effect of local structure on the phenomenon. Size distributions of islands and gaps, along with the volume fractions of Ag in thin films, were measured using scanning electron microscopy as a function of film thickness. The local structure of Ag nano clusters deposited on silicon substrates was investigated using a total conversion electron yield X‐ray absorption fine structure (XAFS) method at the Ag K‐edge. We observed a correlation between the electromagnetic field intensity at the surface as evaluated by IR measurement and the coordination numbers evaluated by XAFS. We found that the film morphology had a greater effect on resonant and nonresonant contributions than did the local structure of a particle. Copyright © 2006 John Wiley & Sons, Ltd.     

In situ TREXS Observation of Surface Reduction Reaction of NiO Film with ∼2 nm Surface Sensitivity

X‐ray absorption fine structure (XAFS) spectroscopy is one of the most widely used methods at synchrotron radiation facilities. XAFS gives us information on chemical states and local structures. Fundamentally, XAFS is bulk sensitive, not surface sensitive. If a surface sensitive XAFS method was available, surface chemical reactions can be observed under realistic conditions. Here, we report the development and present status of a type of surface sensitive x‐ray spectroscopy, which is named total reflection x‐ray spectroscopy, TREXS.     

Visualization of Heterogeneous Oxygen Storage Behavior in Platinum‐Supported Cerium‐Zirconium Oxide Three‐Way Catalyst Particles by Hard X‐ray Spectro‐Ptychography

The cerium density and valence in micrometer‐size platinum‐supported cerium–zirconium oxide Pt/Ce₂Zr₂O_x (x=7–8) three‐way catalyst particles were successfully mapped by hard X‐ray spectro‐ptychography (ptychographic‐X‐ray absorption fine structure, XAFS). The analysis of correlation between the Ce density and valence in ptychographic‐XAFS images suggested the existence of several oxidation behaviors in the oxygen storage process in the Ce₂Zr₂O_x particles. Ptychographic‐XAFS will open up the nanoscale chemical imaging and structural analysis of heterogeneous catalysts.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Advances in Synchrotron Radiation‐based X‐ray Absorption Spectroscopy to Characterize the Fine Atomic Structure of Single‐atom Nanozymes

Single‐atom nanozymes (SAzymes) with high atomic utilization, excellent catalytic activities, and selectivity have recently attracted significant interest. Usually, they contain only isolated metal atoms embedded in host matrices. However, traditional measuring instruments are extremely difficult to obtain their useful structural information due to ultra‐low metal loading, amorphous structure, coordination with light‐weight surface atoms and/or co‐existing of other metal elements. Synchrotron radiation‐based X‐ray absorption fine structure spectroscopy (XAFS) has demonstrated its usefulness for this type of catalyst. In this mini‐review, we have summarized the recent progress using XAFS to characterize the fine atomic structure of these nanozymes. The synthetic strategies of SAzymes, the principle of XAFS, delicate structural information by XAFS, and the applications of SAzymes have been presented. Furthermore, the outlook and challenges in this active research field have also been discussed. We expect that the help of XAFS can offer a wealth of opportunities to design and develop more efficient SAzymes and apply them to various fields.     

Consequences of x‐ray absorption fine structure for quantitative core‐level photoelectron spectroscopy

The dependence of x‐ray absorption fine structure (XAFS) on the chemical environment implies a corresponding environmental dependence of photoionization cross‐sections. The practical consequences of the XAFS for quantitative core‐level photoelectron spectroscopy have been studied for a number of materials with the help of simulations based on the ab initio FEFF code. The XAFS effects are predicted to be significant only for photoelectron kinetic energies below 250–300 eV. These effects take the form of systematic sensitivity factor variations between different chemical structural environments (e.g. compound materials quantified with reference to elemental standards). Apart from a few exceptions (e.g. the 2p core levels of Zn, Ga, Ge and As in metallic environments), the XAFS should introduce no significant errors when conventional Mg Kα or Al Kα sources are used for excitation. For core‐level spectra excited with synchrotron radiation or He II radiation sources, the quantification errors can readily approach or exceed 10% at room temperature (and are expected to increase at lower temperatures). Copyright © 2003 John Wiley & Sons, Ltd.     

Influence of oxygen on the crystalline-amorphous transition in gallium nitride films

Oxygen is a common impurity in nitride-based materials that affects the properties of technologically important materials such as gallium nitride semiconductors. In this work, the influence of oxygen on the structural evolution of GaN films is investigated using near-edge X-ray absorption fine structure (NEXAFS). The combined spectra of Ga L3-edge, N K-edge, and O K-edge indicate that the gallium coordination, formed by a mixture of oxide and nitride bonds, is directly dependent on the concentration of oxygen in the films. Below 24 atom % oxygen, gallium atoms are tetrahedrally coordinated within the films, while at higher concentrations the octahedral environment persists.     

Wet‐Chemical Synthesis of Nanoscale Iron Boride,XAFS Analysis and Crystallisation to α‐FeB

The reaction of lithium tetrahydridoborate and iron bromide in high boiling ether as reaction medium produces an ultrafine, pyrophoric and magnetic precipitate. X‐ray and electron diffraction proved the product to be amorphous. According to X‐ray absorption fine structure spectroscopy (XAFS) the precipitate has FeB structure up to nearly two coordination spheres around an iron absorber atom. Transmission electron microscopy (TEM) confirms the ultrafine powder to be nanoscale. Subsequent annealing at 450 °C causes the atoms to arrange in a more distinct FeB structure, and further thermal treatment to 1050 °C extends the local structure to the α‐modification of FeB. Between 1050 °C and 1500 °C α‐FeB is transformed into β‐FeB.     

The effects of oxygen co‐doping on structural,magnetic and optical properties of Mn‐doped GaN

The GaMnN and GaMnN: O films were obtained by annealing at different NH₃ flow rates. When the NH₃ flow rate was decreased to 20 sccm, the oxygen was co‐doped into GaMnN film and substituted the few host atoms, which were confirmed by the X‐ray Photoelectron Spectra. Moreover, the oxygen co‐doping in GaMnN film drastically enhanced the gain of the ferromagnetic (FM) state but oxygen as shallow donor in GaN offers little carriers. Hence, the enhanced FM state is not due to increase of carrier concentration. On optical properties, the oxygen co‐doping in GaMnN film will suppress the blue luminescence centered near 2.8 eV and make a blue shift of the photoluminescence spectra. Copyright © 2013 John Wiley & Sons, Ltd.     

An X‐ray absorption spectroscopic study of carbon monoxide‐adsorbed Cu surface

Adsorption/interaction of Carbon monoxide (CO) on a catalytic surface is the key step in electrochemical conversion of CO2 for environmental consideration. Copper (Cu) is known to be the most efficient catalyst for this purpose. Thus, this paper investigates effects of CO adsorption on the electronic/atomic state of polycrystalline Cu surface by using x‐ray absorption spectroscopy (XAS). X‐ray absorption near‐edge structure (XANES) tells that the Cu K‐edge shift +0.2 eV on adsorbing CO. Extended x‐ray absorption fine structure (EXAFS) analysis informs that CO adsorption disturbs Cu surface, i.e. increase of Cu‐Cu bonding distance and decrease of the coordination number of the first nearest neighbor. Both the results of XANES and EXAFS imply decrease of d‐electron density of Cu on the adsorption. Demonstrated is that XAS is very useful in studying the surface phenomena of a catalyst but requires further efforts. Copyright © 2014 John Wiley & Sons, Ltd.     

Layer structure estimation of three‐dimensional crystal and two‐dimensional molecular film for fluorinated comb copolymers

Comb copolymers containing both hydrogenated and fluorinated side‐chains were prepared by copolymerization using acrylic or methacrylic monomers in several ratios. The crystal structures of these copolymers and layer structures of their organized molecular films were investigated by wide‐angle X‐ray diffraction (WAXD), small‐angle X‐ray scattering (SAXS), and out‐of plane X‐ray diffraction. Further, to selectively estimate the regularity of shorter fluorocarbon side‐chains, organized molecular films of copolymers were investigated by polarized near‐edge X‐ray adsorption fine structure (NEXAFS) spectroscopy. From the results of these measurements, it was inferred that these copolymers formed highly ordered layer structures, and a long spacing was predominantly determined by the arrangement of hydrogenated side‐chains, except in copolymers having extremely high fluorocarbon contents. In the case of the organized molecular films, the fluorinated side‐chains of methacrylate copolymers cannot form a highly ordered arrangement, whereas those of acrylate copolymers were oriented on monolayers. However, in both cases, the hydrogenated side‐chains predominantly formed layer structures in the organized films, and the fluorinated side‐chains did not contribute to the formation of the layer structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 534–546, 2008     

Molecular Suction Pads: Self‐Assembled Monolayers of Subphthalocyaninatoboron Complexes on Gold

Subphthalocyaninatoboron complexes with six long‐chain alkylthio substituents in their periphery are applicable for the formation of self‐assembled monolayers (SAMs) on gold. Such films are prepared from solution with the axially chlorido‐substituted derivatives and characterised by near‐edge X‐ray absorption fine structure (NEXAFS) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The results are in accord with the formation of SAMs assembled by the chemisorption of both covalently bound thiolate‐type as well as coordinatively bound thioether units. The adsorbate molecules adopt an essentially flat adsorption geometry on the substrate, resembling a suction pad on a surface.     

Adsorption and orientation kinetics of self‐assembled films of octadecyltrimethoxysilane on aluminium oxide surfaces

X‐ray photoelectron spectroscopy (XPS) and near‐edge x‐ray absorption fine structure (NEXAFS) spectroscopy have been used to study the time‐dependent adsorption and molecular orientation behaviour of octadecyltrimethoxysilane (ODTMS) on native aluminium oxide surfaces. By measuring the adsorption isotherm using XPS, we show that ODTMS molecules exhibit oscillatory adsorption. The oscillatory adsorption behaviour for ODTMS is analogous to that observed for its simpler short‐chain ‘cousin’—propyltrimethoxysilane (PTMS)—and suggests that the length of the functional alkyl chain on an organosilane does not have a significant influence upon the oscillatory adsorption mechanism. The oscillation in the ODTMS adsorption isotherm shows a maximum and a minimum in coverage at an adsorption time of ～30 and ～65 s, respectively, for a 0.75% ODTMS solution in a 90% ethanol–10% water mixture at pH 4. The time‐dependent orientation behaviour of the ODTMS molecules during adsorption was examined using angular‐dependent carbon K‐edge NEXAFS spectroscopy. We show that the alignment of the ODTMS film changes systematically with deposition time and appears to be correlated with coverage measurements obtained using XPS. In particular, by combining the XPS and NEXAFS results we demonstrate that the minimum ODTMS coverage corresponds to a film whose alignment appears to be predominantly randomized. Copyright © 2005 John Wiley & Sons, Ltd.     

Imaging of Oxygen Diffusion in Individual Platinum/Ce2Zr2Ox Catalyst Particles During Oxygen Storage and Release

The spatial distribution of Ce³⁺ and Ce⁴⁺ in each particle of Ce₂Zr₂O_x in a three‐way conversion catalyst system was successfully imaged during an oxygen storage/release cycle by scanning X‐ray absorption fine structure (XAFS) using hard X‐ray nanobeams. For the first time, nano‐XAFS imaging visualized and identified the modes of non‐uniform oxygen diffusion from the interface of Pt catalyst and Ce₂Zr₂O_x support and the active parts in individual catalyst particles.     

Development of Surface Fluorescence X‐Ray Absorption Fine Structure Spectroscopy Using a Laue‐Type Monochromator

Surface fluorescence X‐ray absorption fine structure (XAFS) spectroscopy using a Laue‐type monochromator has been developed to acquire structural information about metals with a very low concentrate on a flat highly oriented pyrolytic graphite (HOPG) surface in the presence of electrolytes. Generally, surface fluorescence XAFS spectroscopy is hindered by strong scattering from the bulk, which often chokes the pulse counting detector. In this work, we show that a bent crystal Laue analyzer (BCLA) can efficiently remove the scattered X‐rays from the bulk even in the presence of solution. We applied the technique to submonolayer (～10¹⁴ atoms cm^?2) Pt on HOPG and successfully obtained high signal/noise in situ XAFS data in combination with back‐illuminated fluorescence XAFS (BI‐FXAFS) spectroscopy. This technique allows in situ XAFS measurements of flat electrode surfaces to be performed in the presence of electrolytes.     

Structural,electronic, and magnetic properties of 3d transition metal doped GaN nanosheet: A first‐principles study

We have performed the first‐principles calculations on the structural, electronic, and magnetic properties of 3d transition‐metal? (Cr, Mn, Fe, Co, and Ni) atoms doped 2D GaN nanosheet. The results show that 3d TM atom substituting one Ga leads to a structural reconstruction around the 3d TM impurity compared to the pristine GaN nanosheet. The doping of TM atom can induce magnetic moments, which are mainly located on the 3d TM atom and its nearest‐neighbor N atoms. It is found that Mn‐ and Ni‐doped GaN nanosheet with 100% spin polarization characters seem to be good candidates for spintronic applications. When two Ga atoms are substituted by two TM dopants, the ferromagnetic (FM) ordering becomes energetically more favorable for Cr‐, Mn‐, and Ni‐doped GaN nanosheet with different distances of two TM atoms. On the contrary, the antiferromagnetic (AFM) ordering is energetically more favorable for Fe‐doped GaN nanosheet. In addition, our GGA + U calculations show the similar results with GGA calculations. © 2016 Wiley Periodicals, Inc.     

Interaction of O2, CO and CO2 with Co films

Metastable impact electron spectroscopy (MIES), ultraviolet photoelectron spectroscopy (UPS(HeI)) and x‐ray photoelectron spectroscopy (XPS) were applied to study the interaction of O₂, CO and CO₂ with Co films at room temperature. The films were produced on Si(100) surfaces under the in situ control of MIES, UPS and scanning tunnelling microscopy (STM). For O₂, dissociative adsorption takes place initially and then incorporation of oxygen starts at exposures of ～5 L. Comparison of the MIES and UPS spectra with those published for CoO shows that near‐stoichiometric CoO films can be obtained by co‐deposition of Co and O₂. The CO is adsorbed molecularly up to a maximum coverage of ～0.6 monolayer, with the C‐end pointing towards the surface. The CO₂ adsorption is dissociative, resulting in the formation of Co–CO bonds at the surface. The resulting oxygen atoms are mostly incorporated into the Co layer. For all studied molecules the interaction with Co is similar to that with Ni. Copyright © 2005 John Wiley & Sons, Ltd.     

Nanostructural properties of zinc oxide thin films grown on non‐planar substrates

The crystallographic structure of zinc oxide thin films grown on optical fibres using single source chemical vapour deposition (SSCVD) was analysed using near edge X‐ray absorption fine structure (NEXAFS). Zinc diethyl carbamate was used as a precursor for the growth of highly conformal films in a one‐step deposition process without substrate rotation and at substrate temperatures of 400–575 °C. It was found that the growth temperatures greatly affected the crystallographic structure of the film with no preferred crystallographic orientation and negligible crystallinity at low temperatures and very high crystallinity with pure c‐axis orientation at high temperatures. Cross‐sectional analysis of the films by scanning electron microscopy (SEM) showed the presence of a film at all points around the fibre. These films generally consisted of densely packed columns that bore a strong resemblance to c‐axis‐oriented films grown on planar substrates. Copyright © 2005 John Wiley & Sons, Ltd.