Reversible addition–fragmentation chain transfer polymerization of glycidyl methacrylate with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate as a chain‐transfer agent

A reversible addition–fragmentation chain transfer (RAFT) agent, 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN), was synthesized and applied to the RAFT polymerization of glycidyl methacrylate (GMA). The polymerization was conducted both in bulk and in a solvent with 2,2′‐azobisisobutyronitrile (AIBN) as the initiator at various temperatures. The results for both types of polymerizations showed that GMA could be polymerized in a controlled way by RAFT polymerization with CPDN as a RAFT agent; the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with the monomer conversion up to 96.7% at 60 °C, up to 98.9% at 80 °C in bulk, and up to 64.3% at 60 °C in a benzene solution. The polymerization rate of GMA in bulk was obviously faster than that in a benzene solution. The molecular weights obtained from gel permeation chromatography were close to the theoretical values, and the polydispersities of the polymer were relatively low up to high conversions in all cases. It was confirmed by a chain‐extension reaction that the AIBN‐initiated polymerizations of GMA with CPDN as a RAFT agent were well controlled and were consistent with the RAFT mechanism. The epoxy group remained intact in the polymers after the RAFT polymerization of GMA, as indicated by the ¹H NMR spectrum. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2558–2565, 2004     

Reversible addition–fragmentation chain transfer polymerization of methyl methacrylate in emulsion

Theoretical simulations showed that for controlled/living radical polymerization in an emulsion system, some of the earliest born particles could be superswollen to a size close to 1 μm. We hypothesized that the superswelling of these particles would lead to colloidal instability. Under the guidance of the simulation results, reversible addition–fragmentation chain transfer (RAFT) emulsion polymerization of methyl methacrylate (MMA) was carried out. Experimental results showed that increasing the initiation rate, surfactant level, and targeted molecular weight could improve the colloidal stability of the RAFT polymerization of MMA in an emulsion. The experimental results were in full accord with the theoretical predictions. The poor control of the molecular weight and polydispersity index was found to have a close relationship with the colloidal instability. For the first time, we demonstrated that RAFT polymerization could successfully be implemented with little coagulum, good control of the molecular weight, and a low polydispersity index with the same process used for traditional emulsion polymerization but with higher surfactant levels and initiation rates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:2837–2847, 2006     

Synthesis and characterization of block copolymers containing poly(di(ethylene glycol) 2‐ethylhexyl ether acrylate) by reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization has emerged as one of the important living radical polymerization techniques. Herein, we report the polymerization of di(ethylene glycol) 2‐ethylhexyl ether acrylate (DEHEA), a commercially‐available monomer consisting of an amphiphilic side chain, via RAFT by using bis(2‐propionic acid) trithiocarbonate as the chain transfer agent (CTA) and AIBN as the radical initiator, at 70 °C. The kinetics of DEHEA polymerization was also evaluated. Synthesis of well‐defined ABA triblock copolymers consisting of poly(tert‐butyl acrylate) (PtBA) or poly(octadecyl acrylate) (PODA) middle blocks were prepared from a PDEHEA macroCTA. By starting from a PtBA macroCTA, a BAB triblock copolymer with PDEHEA as the middle block was also readily prepared. These amphiphilic block copolymers with PDEHEA segments bearing unique amphiphilic side chains could potentially be used as the precursor components for construction of self‐assembled nanostructures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5420–5430, 2007     

Reversible addition–fragmentation chain transfer polymerization of methyl methacrylate in suspension

The reversible addition–fragmentation chain transfer polymerization of methyl methacrylate mediated by 2‐cyanoprop‐2‐yl dithiobenzoate (CPDB) in bulk (60 and 70 °C) and suspension (70 °C) was studied, and in both polymerization systems, a good control of the molecular weight and polydispersity was observed. Stable suspension polymerizations were carried out over a range of CPDB concentrations, and with increasing CPDB concentration, the particle size and polydispersity index of the produced polymer decreased. The former was ascribed to the lower viscosities of the monomer and polymer droplets at low conversions, which caused easier breakup with the applied shear stresses. Lower polydispersity indices at higher CPDB concentrations were probably caused by a diminished gel effect, which was observed at lower CPDB concentrations at high conversions, causing a broadening of the molecular weight distribution. The livingness of the polymers formed in suspension was proven by successful chain extensions with methyl methacrylate, styrene, and 2‐hydroxyethyl methacrylate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2001–2012, 2005     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

Reversible addition‐fragmentation chain transfer polymerization of vinyl acetate under high pressure

In this work, high molecular weight polyvinyl acetate (PVAc) (M_n,GPC = 123,000 g/mol, M_w/M_n = 1.28) was synthesized by reversible addition‐fragmentation chain transfer polymerization (RAFT) under high pressure (5 kbar), using benzoyl peroxide and N,N‐dimethylaniline as initiator mediated by (S)‐2‐(ethyl propionate)‐(O‐ethyl xanthate) (X1) at 35 °C. Polymerization kinetic study with RAFT agent showed pseudo‐first order kinetics. Additionally, the polymerization rate of VAc under high pressure increased greatly than that under atmospheric pressure. The “living” feature of the resultant PVAc was confirmed by ¹H NMR spectroscopy and chain extension experiments. Well‐defined PVAc with high molecular weight and narrow molecular weight distribution can be obtained relatively fast by using RAFT polymerization at 5 kbar. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1430–1436     

Reversible addition‐fragmentation chain transfer polymerization of diisopropyl fumarate using various dithiobenzoates as chain transfer agents

Dialkyl fumarates as 1,2‐disubstituted ethylenes exhibit unique features of radical polymerization kinetics due to their significant steric hindrance in propagation and termination processes and provide polymers with a rigid chain structure different from conventional vinyl polymers. In this study, we carried out reversible addition‐fragmentation chain transfer polymerization of diisopropyl fumarate (DiPF) in bulk at 80 °C using various dithiobenzoates with different leaving R groups as chain transfer agents to reveal their performance for control of molecular weight, molecular weight distribution, and chain end functionality of the resulting poly(DiPF) (PDiPF). 2‐(Ethoxycarbonyl)‐2‐propyl dithiobenzoate ( DB1 ) and 2,4,4‐trimethyl‐2‐pentyl dithiobenzoate ( DB2 ) underwent fragmentation and reinitiation at a moderate rate and consequently led to the formation of PDiPF with well‐controlled chain structures. It was confirmed that molecular weight of PDiPF produced by controlled polymerization with DB1 and DB2 agreed with theoretical one and molecular weight distribution was narrow. Dithiobenzoate and R fragments were introduced into the polymer chain ends with high functionality as 95% by the use of DB1 . In contrast, polymerizations using 1‐(ethoxycarbonyl)benzyl dithiobenzoate ( DB3 ), 1‐phenylethyl dithiobenzoate ( DB4 ), and 2‐phenyl‐2‐propyl dithiobenzoate ( DB5 ) resulted in poor control of molecular weight, molecular weight distribution, and chain end structures of PDiPF. Fragmentation and reinitiation rates of the used benzoates as chain transfer agents significantly varied depending on the R structures in an opposite fashion; that is, introduction of bulky and conjugating substituents accelerated fragmentation, but it retarded initiation of DiPF polymerization. It was revealed that balance of fragmentation and reinitiation was important for controlled polymerization of DiPF. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3266–3275     

Reversible addition–fragmentation chain transfer polymerization of styrene under microwave irradiation

Reversible addition–fragmentation chain transfer (RAFT) polymerizations of styrene under microwave irradiation (MI), with or without azobisisobutyronitrile, were successfully carried out in bulk at 72 and 98 °C, respectively. The results showed that the polymerizations had living/controlled features, and there was a significant enhancement of the polymerization rates under MI in comparison with conventional heating (CH) under the same conditions. The polymer structures were characterized with ¹H and ¹³C NMR. The results showed the same structure for both polymers obtained by MI and CH. Successful chain‐extension experimentation further demonstrated the livingness of the RAFT polymerization carried out under MI. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6810‐6816, 2006     

α‐Cyanobenzyl dithioester reversible addition–fragmentation chain‐transfer agents for controlled radical polymerizations

A series of new reversible addition–fragmentation chain transfer (RAFT) agents with cyanobenzyl R groups were synthesized. In comparison with other dithioester RAFT agents, these new RAFT agents were odorless or low‐odor, and this made them much easier to handle. The kinetics of methyl methacrylate radical polymerizations mediated by these RAFT agents were investigated. The polymerizations proceeded in a controlled way, the first‐order kinetics evolved in a linear fashion with time, the molecular weights increased linearly with the conversions, and the polydispersities were very narrow (～1.1). A poly[(methyl methacrylate)‐block‐polystyrene] block copolymer was prepared (number‐average molecular weight = 42,600, polydispersity index = 1.21) from a poly(methyl methacrylate) macro‐RAFT agent. These new RAFT agents also showed excellent control over the radical polymerization of styrenics and acrylates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1535–1543, 2005     

Kinetic model of reversible addition‐fragmentation chain transfer polymerization in microemulsions

A simplified kinetic model for RAFT microemulsion polymerization has been developed to facilitate the investigation of the effects of slow fragmentation of the intermediate macro‐RAFT radical, termination reactions, and diffusion rate of the chain transfer agent to the locus of polymerization on the control of the polymerization and the rate of monomer conversion. This simplified model captures the experimentally observed decrease in the rate of polymerization, and the shift of the rate maximum to conversions less than the 39% conversion predicted by the Morgan model for uncontrolled microemulsion polymerizations. The model shows that the short, but finite, lifetime of the intermediate macro‐RAFT radical (1.3 × 10^?4–1.3 × 10^?2 s) causes the observed rate retardation in RAFT microemulsion polymerizations of butyl acrylate with the chain transfer agent methyl‐2‐(O‐ethylxanthyl)propionate. The calculated magnitude of the fragmentation rate constant (k_f = 4.0 × 10¹–4.0 × 10³ s^?1) is greater than the literature values for bulk RAFT polymerizations that only consider slow fragmentation of the macro‐RAFT radical and not termination (k_f = 10^?2 s^?1). This is consistent with the finding that slow fragmentation promotes biradical termination in RAFT microemulsion polymerizations. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 604–613, 2010     

A cyclic selenium‐based reversible addition‐fragmentation chain transfer agent mediated polymerization of vinyl acetate

A cyclic selenium‐based reversible addition‐fragmentation chain transfer (RAFT) agent, 5,5‐dimethyl‐3‐phenyl‐2‐selenoxo‐1,3‐selenazolidin‐4‐one (RAFT‐Se), was synthesized and utilized in the RAFT polymerizations of vinyl acetate (VAc). Its analog, 5,5‐dimethyl‐3‐phenyl‐2‐thioxothiazolidin‐4‐one (RAFT‐S), was also used in RAFT polymerizations for comparison under identical conditions. The RAFT polymerizations of VAc with RAFT‐Se were moderately controlled evidenced by the increase of molecular weights with conversion, despite the slightly high M_w/M_n (less than 1.90), whereas the molecular weights were poorly controlled in the presence of RAFT‐S (2.00 < M_w/M_n < 2.30). Thanks to its unusual cyclic structure of RAFT‐Se, one or more RAFT‐Se species was incorporated into the resultant poly(VAc) as revealed by the results of cleavage of polymer and atomic absorption spectroscopy. Considering the biorelated functions of both poly(VAc) and Se element, this work undoubtedly provided a successful methodology of how to incorporate high content of Se into a molecular weight controlled poly(VAc). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Long‐lived intermediates in reversible addition–fragmentation chain‐transfer (RAFT) polymerization generated by γ radiation

A novel experimental procedure is presented that allowed probing of reversible addition–fragmentation chain‐transfer (RAFT) free‐radical polymerizations for long‐lived species. The new experimental sequence consisted of gamma irradiation of a mixture of initial RAFT agent (cumyl dithiobenzoate) and monomer at ambient temperature, a subsequent predetermined waiting period without initiation source also at ambient temperature, and then heating of the reaction mixture to a significantly higher temperature. After each sequence step, the monomer conversion and molecular weight distribution were determined, indicating that controlled polymer formation occurs only during the heating period. The results indicated that stable intermediates (either radical or nonradical in nature) are present in such experiments because thermal self‐initiation of the monomer can be excluded as the reason for polymer formation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1058–1063, 2002     

Influence of a reversible addition–fragmentation chain transfer agent in the dispersion polymerization of styrene

Dispersion polymerization was applied to the controlled/living free‐radical polymerization of styrene with a reversible addition–fragmentation chain transfer (RAFT) polymerization agent in the presence of poly(N‐vinylpyrrolidone) and 2,2′‐azobisisobutyronitrile in an ethanol medium. The effects of the polymerization temperature and the postaddition of RAFT on the polymerization kinetics, molecular weight, polydispersity index (PDI), particle size, and particle size distribution were investigated. The polymerization was strongly dependent on both the temperature and postaddition of RAFT, and typical living behavior was observed when a low PDI was obtained with a linearly increased molecular weight. The rate of polymerization, molecular weight, and PDI, as well as the final particle size, decreased with an increased amount of the RAFT agent in comparison with those of traditional dispersion polymerization. Thus, the results suggest that the RAFT agent plays an important role in the dispersion polymerization of styrene, not only reducing the PDI from 3.34 to 1.28 but also producing monodisperse polystyrene microspheres. This appears to be the first instance in which a living character has been demonstrated in a RAFT‐mediated dispersion polymerization of styrene while the colloidal stability is maintained in comparison with conventional dispersion polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 348–360, 2007     

Macromolecular design via reversible addition–fragmentation chain transfer (RAFT)/xanthates (MADIX) polymerization

Among the living radical polymerization techniques, reversible addition–fragmentation chain transfer (RAFT) and macromolecular design via the interchange of xanthates (MADIX) polymerizations appear to be the most versatile processes in terms of the reaction conditions, the variety of monomers for which polymerization can be controlled, tolerance to functionalities, and the range of polymeric architectures that can be produced. This review highlights the progress made in RAFT/MADIX polymerization since the first report in 1998. It addresses, in turn, the mechanism and kinetics of the process, examines the various components of the system, including the synthesis paths of the thiocarbonyl‐thio compounds used as chain‐transfer agents, and the conditions of polymerization, and gives an account of the wide range of monomers that have been successfully polymerized to date, as well as the various polymeric architectures that have been produced. In the last section, this review describes the future challenges that the process will face and shows its opening to a wider scientific community as a synthetic tool for the production of functional macromolecules and materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43:5347–5393, 2005     

Influence of the chemical structure of dithiocarbamates with different N‐groups on the reversible addition–fragmentation chain transfer polymerization of styrene

Polymerizations of styrene with azobisisobutyronitrile initiation or thermal initiation have been performed in the presence of dithiocarbamates with different N‐groups, that is, benzyl 4,5‐diphenyl‐1H‐imidazole‐1‐carbodithioate ( 2a ), benzyl 1H‐1,2,4‐triazole‐1‐carbodithioate ( 2b ), benzyl indole‐1‐carbodithioate ( 2c ), benzyl 2‐phenyl‐indole‐1‐carbodithioate ( 2d ), benzyl phenothiazine‐10‐carbodithioate ( 2e ), benzyl 9H‐carbazole‐9‐carbodithioate ( 2f ), and benzyl dibenzo[b,f]azepine‐5‐carbodithioate ( 2g ). The results show that the structure of the N‐group of dithiocarbamates has significant effects on the activity of dithiocarbamates for the polymerization of styrene. 2a , 2b , 2c , 2d , and 2f are effective reversible addition–fragmentation chain transfer (RAFT) agents for the RAFT polymerization of styrene, and the polymerizations have good living characteristics. However, in the cases of 2e and 2g , the obtained polymers have uncontrolled molecular weights and broad molecular weight distributions. The polymerization rate is markedly influenced by the conjugation structure of the N‐group of the dithiocarbamate, and the polymerization rate of 2b is greater than that of 2a . For 2b , the rate of polymerization seems independent of the RAFT agent concentration. However, a significant retardation in the rate of polymerization can be observed in the case of 2c . 2d is more effective than 2c , and the substitution group of phenyl on this dithiocarbamate has obvious effects on the effectiveness of the controlled polymerization of styrene. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4849–4856, 2005     

Reversible addition–fragmentation chain transfer mediated radical polymerization of asymmetrical divinyl monomers targeting hyperbranched vinyl polymers

Reversible addition–fragmentation chain transfer (RAFT) mediated radical polymerizations of allyl methacrylate and undecenyl methacrylate, compounds containing two types of vinyl groups with different reactivities, were investigated to provide hyperbranched polymers. The RAFT agent benzyl dithiobenzoate was demonstrated to be an appropriate chain‐transfer agent to inhibit crosslinking and obtain polymers with moderate‐to‐high conversions. The polymerization of allyl methacrylate led to a polymer without branches but with five‐ or six‐membered rings. However, poly(undecenyl methacrylate) showed an indication of branching rather than intramolecular cycles. The hyperbranched structure of poly(undecenyl methacrylate) was confirmed by a combination of ¹H, ¹³C, ¹H–¹H correlation spectroscopy, and distortionless enhancement by polarization transfer 135 NMR spectra. The branching topology of the polymers was controlled by the variation of the reaction temperature, chain‐transfer‐agent concentration, and monomer conversion. The significantly lower inherent viscosities of the resulting polymers, compared with those of linear analogues, demonstrated their compact structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 26–40, 2007     

Synthesis and characterization of fluorescence end‐labeled polystyrene via reversible addition‐fragmentation chain transfer (RAFT) polymerization

Fluorescence end‐labeled polystyrene (PS) with heteroaromatic carbazole or indole group were prepared conveniently via reversible addition‐fragmentation chain transfer (RAFT) polymerization using dithiocarbamates, ethyl 2‐(9H‐carbazole‐9‐carbonothioylthio)propanoate (ECCP) and benzyl 2‐phenyl‐1H‐indole‐1‐carbodithioate (BPIC) as RAFT agents. The end functionality of obtained PS with different molecular weights was high. The steady‐state and the time‐resolved fluorescence techniques had been used to study the fluorescence behaviors of obtained end‐labeled PS. The fluorescence of dithiocarbamates resulting PS in solid powder cannot be monitored; however, they exhibited structured absorptions and emissions in solvent DMF and the fluorescence lifetimes of PS had no obvious change with molecular weights increasing. These observations suggested that the polymer chains were possibly stretched adequately in DMF, that is, the fluorescence end group was exposed into solvent molecules and little quenching of excited state occurred upon incorporation into polymer chain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6198–6205, 2008     

Dibenzyl trithiocarbonate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile

Reversible addition–fragmentation chain transfer polymerization has been successfully applied to polymerize acrylonitrile with dibenzyl trithiocarbonate as the chain‐transfer agent. The key to success is ascribed to the improvement of the interchange frequency between dormant and active species through the reduction of the activation energy for the fragmentation of the intermediate. The influence of several experimental parameters, such as the molar ratio of the chain‐transfer agent to the initiator [azobis(isobutyronitrile)], the molar ratio of the monomer to the chain‐transfer agent, and the monomer concentration, on the polymerization kinetics and the molecular weight as well as the polydispersity has been investigated in detail. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry and ¹H NMR analyses have confirmed the chain‐end functionality of the resultant polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 490–498, 2006     

Reversible addition–fragmentation chain‐transfer polymerization of vinyl monomers with N,N‐dimethyldiselenocarbamates

A new range of selenium‐based reversible addition‐fragmentation chain‐transfer (RAFT) agents is described and tested in the polymerization of styrene, acrylates, vinyl esters, and N‐vinylcaprolactam. The synthesized N,N‐dimethyldiselenocarbamates were poor control agents for styrene polymerization, whereas polyacrylates of controlled molar masses and bearing a diselenocarbamate terminal group could be synthesized. The polymerization of vinyl acetate and vinyl pivalate proceeded in a controlled manner as confirmed by size‐exclusion chromatography, matrix‐assisted laser desorption ionization‐time‐of‐flight mass spectrometry, and ⁷⁷Se NMR analyses. The capability of these RAFT agents to control the polymerization of both more‐activated monomers and less‐activated monomers was exemplified through the synthesis of a poly(t‐butyl acrylate)‐b‐poly(vinyl acetate) diblock copolymer. Considering the very broad range of carbamate groups which can be envisioned, this finding opens numerous perspectives for diselenocarbamate‐mediated RAFT polymerization with its specificities yet to be explored. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4361–4368     

Controlled radical polymerization of styrene and methyl acrylate in the presence of reversible addition–fragmentation chain transfer agents,phenylethyl phenyl dithioacetate and phenyldithioacetic acid

The use of phenyldithioacetic acid (PDA) in homopolymerizations of styrene or methyl acrylate produced only a small fraction of chains with dithioester end groups. The polymerizations using 1‐phenylentyl phenyldithioacetate (PEPDTA) and PDA in the same reaction showed that PDA had little or no influence on the rate or molecular weight distribution even when a 1:1 ratio is used. The mechanistic pathway for the polymerizations in the presence of PDA seemed to be different for each monomer. Styrene favors addition of styrene to PDA via a Markovnikov type addition to form a reactive RAFT agent. The polymer was shown by double detection SEC to contain dithioester end groups over the whole distribution. This polymer was then used in a chain extension experiment and the M_n was close to theory. A unique feature of this work was that PDA could be used to form a RAFT agent in situ by heating a mixture of styrene and PDA for 24 h at 70 °C and then polymerizing in the presence of AIBN to give a linear increase in M_n and low values of PDI (<1.14). In the case of the polymerization of MA with PDA, the mechanism was proposed to be via degradative chain transfer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5232–5245, 2005