Synthesis of poly(p‐methoxyphenylacetylene) with the vanadium acetylacetonate‐aluminum triethyl Ziegler–Natta catalyst system: Cyclotrimers/polymer ratio analysis

Poly(p‐methoxyphenylacetylene) was obtained by the reaction of p‐methoxyphenylacetylene (MOPA) with the vanadium acetylacetonate‐aluminum triethyl V(acac)₃‐AlEt₃ homogeneous catalyst system. The crude product was always a mixture of 1,2,4‐ and 1,3,5‐tris(p‐methoxyphenyl)benzene and poly(MOPA) of low averaged molecular weight. The 1,2,4‐ and 1,3,5‐cyclotrimers versus poly(MOPA) ratio was analyzed. The poly(MOPA) obtained under different conditions, on the basis of the spectroscopic data, always shows a cis–transoidal stereo‐regular structure. Molecular mass of poly(MOPA) was determined by vapor pressure osmometry, high pressure liquid chromatography (HPLC), and gel permeation chromatography (GPC) techniques. The kinetics of the reaction has been also analyzed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5987–5997, 2005     

Synthesis and polymerization of 5‐(N,N‐dimethylamino)naphthylacetylene with homogeneous rhodium and palladium complexes

The monomer 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine ( 2 ) was satisfactorily obtained by a heterocoupling reaction between 5‐iodo‐(N,N‐dimethyl)naphthalen‐1‐amine and 2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system and followed by acetone elimination. Poly(5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine) was isolated by the reaction of 2 in the presence of homogeneous rhodium and palladium complexes. On the basis of the spectroscopic data, the polymer always showed a cis–transoidal, stereoregular structure. Moreover, only with the rhodium catalyst in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The kinetics of the catalyzed reaction were analyzed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 437–446, 2007     

Polymerization of conjugated 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine with rhodium and palladium complexes

The monomer 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine was satisfactory obtained through the heterocoupling reaction of 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine and 4‐(5‐iodo‐1‐naphthyl)‐2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system, followed by acetone elimination. Poly{5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine} was obtained through the reaction of the acetylene monomer with homogeneous rhodium and palladium catalyst complexes. The structure of the polymers always showed a trans–cisoidal chain configuration on the basis of IR and NMR spectra. Moreover, only for the rhodium catalyst complex in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The mass determination of the polymers, by osmometry and gel permeation chromatography techniques, showed low average molecular weights. The kinetics of the catalyzed polymerization were analyzed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2038–2047, 2007     

Effects of Alterations to Ziegler–Natta Catalysts on Kinetics and Comonomer (1‐Butene) Incorporation

Various MgCl₂‐supported Ziegler–Natta (ZN) catalysts are synthesized with the intention to influence polymerization performance and 1‐butene incorporation in an ethylene copolymer. Modifications are introduced during different steps in the synthesis process, namely support preparation, titanation, and catalyst workup. While multiple different effects are observed upon modification, heat treatment during titanation shows the greatest impact. Increasing the heat‐treatment temperature increases polymerization activity. More importantly, the 1‐butene distribution can be shifted toward a more homogeneous profile. The amount of 1‐butene incorporated is similar to both for short‐ and for very long‐chain molecules. This behavior has so far been known only from metallocene‐based polyethylene and suggests that active sites are distributed more homogeneously in the ZN catalyst.

     

Synthesis,structure and cytotoxicity of new 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐furfural diethylacetals and 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐phenylfurans

Novel 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐furfural diethylacetals and 2‐[(3‐aminopropyl)di‐methylsilyl]‐5‐phenylfurans have been synthesized by a hydrosilylation reaction of aliphatic and heterocyclic N‐allylamines in the presence of the Speier's catalyst. The effects of the structure of the amine and nature of organic substituent at the furan ring on the cytotoxicity of the new compounds have been studied. Copyright © 2013 John Wiley & Sons, Ltd.     

Embryotoxicity studies of tri‐n‐butyltin(IV) complexes of 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoic acid and 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl] benzoic acid on sea urchin development

The toxicity studies of free 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoic acid and 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl]benzoic acid and their tri‐n‐butyltin(IV) complexes were evaluated by using sea urchin early developmental stages as recommended model organisms for toxicity tests. The novel complexes, as the parent tri‐n‐butyltin(IV) chloride (TBTCl), caused mitosis block and induced high embryonic mortality in sea urchin. Copyright © 2005 John Wiley & Sons, Ltd.     

Enhancing the electroluminescent efficiency of poly{5‐methoxy‐2‐[(2′‐ethyl‐hexyl)‐oxy]‐p‐phenylenevinylene}/poly(2,3‐diphenyl‐5‐octyl‐p‐phenylenevinylene) polyblends by the introduction of chemical bonding through a thermal treatment

A significant improvement in the electroluminescence (EL) properties was observed for a poly{5‐methoxy‐2‐[(2′‐ethyl‐hexyl)‐oxy]‐p‐phenylenevinylene} (MEH–PPV)/poly(2,3‐diphenyl‐5‐octyl‐p‐phenylenevinylene) (DPO–PPV) blend after a thermal treatment at 200 °C for 2 h in vacuo to furnish the chemical bonding between polymer chains. ¹H NMR spectroscopy and two‐photon excitation microscopy revealed that the chemical bonding turned the immiscible polyblend into a system more like a block copolymer with a vertically segregated morphology. Because both the lowest unoccupied molecular orbital and highest occupied molecular orbital levels of MEH–PPV in the wetting layer were higher than those of DPO–PPV in the upper layer, the heterojunction between the two layers of the polymers fit the category of so‐called type II heterojunctions. As a result, the turn‐on voltage of the polymer light‐emitting diode prepared with the thermally treated polyblend decreased to ～0.6 V, and the EL emission intensities and quantum efficiencies increased to about 4 times those of the untreated polyblend. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 62–69, 2006     

Novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer: Design,synthesis, and properties

A novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer ( CALIX‐PPE ) has been successfully synthesized by cross‐coupling polymerization of bis‐calix[4]arene 1 with 1,4‐diethynylbenzene. The polycondensation was carried out in toluene/NEt₃ at 35 °C for 24 h, using PdCl₂(PPh₃)₂/CuI as the catalytic system, furnishing CALIX‐PPE in excellent isolated yields (higher than 95%, several runs). The yellow polymer is freely soluble in several nonprotic organic solvents. The GPC trace of the isolated polymer showed a monomodal distribution and a number‐average molecular weight of 23,300 g mol^?1 (M_w/M_n = 2.05). No evidence was found in the structural analysis (FTIR and ¹H/¹³C NMR) regarding the formation of alkyne homocoupled segments along the polymer chain. For comparative purposes, the synthesis of an analogous poly(p‐phenylene ethynylene) containing p‐t‐butyl‐phenoxymethyl side chains ( TBP‐PPE ) was also undertaken. A great similarity was found between the photophysical properties of CALIX‐PPE and TBP‐PPE in solution (UV–vis and laser induced luminescence), clearly demonstrating their unique dependence on the structure and conformation of the conjugated PPE backbone. The fluorescence spectra of polymers are of nearly identical shape, displaying their maximum emission around 420 nm. The calculated solution photoluminescence quantum yields of CALIX‐PPE and TBP‐PPE are of similar magnitude (?_{F( CALIX‐PPE )} = 0.43; ?_{F( TBP‐PPE )} = 0.51). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6477–6488, 2008     

Mimicking Ziegler‐Natta Catalysts in Homogeneous Phase, 1. C2‐Symmetric Octahedral Zr(IV) Complexes with Tetradentate [ONNO]‐Type Ligands

Results of propene polymerization in the presence of two known octahedral C₂‐symmetric Zr complexes bearing tetradentate [ONNO]‐type ligands are reported for the first time. Depending on the steric hindrance at the active metal, isotactic site‐controlled or weakly syndiotactic chain‐end‐controlled polymers were obtained, in both cases via highly regioselective 1,2 (primary) monomer insertion. In this respect, the complexes mimic the behavior of the active Ti species on the surface of the heterogeneous Ziegler‐Natta catalysts of which they might represent good structural models.     

ESI‐MS studies of palladium (II) complexes with 1‐(p‐toluenesulfonyl)cytosine/cytosinato ligands

The mononuclear complex Pd(1‐TosC‐N3)₂Cl₂ (2) containing 1‐(p‐toluenesulfonyl)cytosine (1) as a ligand, as well as dinuclear complexes Pd₂(1‐TosC^?‐N3,N4)₄ (3) and Pd₂(1‐TosC^?‐N3,N4)₂DMSO₂Cl₂ (4) containing the ligand anion (1‐TosC^?), was mass analyzed by electrospray ionization ion trap MS/MS and high resolution MS. Complexes 3 and 4 were obtained by recrystallization of 2 from DMF and DMSO, respectively. The behavior of complex 2 in different solutions was monitored by electrospray ionization mass spectrometry (ESI‐MS). Under the applied ESI‐MS conditions, complex 2 in methanol reorganized itself dominantly as new complex 3 and the solvent did not coordinate the formed species. In H₂O/DMSO, CH₃CN/DMSO and CH₃OH/DMSO solutions, complex 2 formed several new species with solvent molecules involved in their structure, e.g. complex 4 was formed as the major product. The newly formed species were also examined by LC‐MS‐DAD, confirming the solvent induced reorganization and the solution instability of complex 2. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of 2,3,3a,9a‐Tetrahydro‐1H‐cyclopenta[b]quinoxaline‐1,3,4,9‐tetracarboxylate by Cyclization of 1,5‐Bis[(trimethylsilyl)oxy]penta‐1,4‐dienes with Quinoxalines

The cyclization of 1,5‐bis[(trimethylsilyl)oxy]penta‐1,4‐dienes with quinoxalines and chloroformates afforded 2,3,3a,9a‐tetrahydro‐1H‐cyclopenta[b]quinoxaline‐1,3,4,9‐tetracarboxylate.     

Synthesis and characterization of near‐monodisperse electron acceptor homopolymers of 2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate

Homopolymers of 2‐(trimethylsiloxy)ethyl methacrylate of degrees of polymerization from 5 to 50 were synthesized by group transfer polymerization in tetrahydrofuran (THF) using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methyl propene as the initiator and tetrabutylammonium bibenzoate as the catalyst. These polymers were first converted to poly[2‐(hydroxy)ethyl methacrylate]s by removal of the trimethylsilyl‐protecting groups by acidic hydrolysis, and subsequently transformed to poly{2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate}s by reaction with 3,5‐dinitrobenzoyl chloride in the presence of triethylamine. Gel permeation chromatography in THF and proton nuclear magnetic resonance (¹H NMR) spectroscopy in CDCl₃ and d₆ dimethyl sulfoxide were used to characterize the polymers in terms of their molecular weight and composition. The molecular weights were found to be close to the values expected from the polymerization stoichiometry and the molecular weight distributions were narrow, with polydispersity indices around 1.1. The hydrolysis and reesterification steps were found to be almost quantitative for all polymers. Differential scanning calorimetry and thermal gravimetric analysis were also employed to measure the glass transition temperatures (T_g 's) and decomposition temperatures, which were determined to be approximately 80 and 320 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1457–1465, 2000     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

1‐[(E)‐2‐Arylethenyl]‐2,2‐diphenylcyclopropanes: Kinetics and Mechanism of Rearrangement to Cyclopentenes

Kinetic measurements for the thermal rearrangement of 2,2‐diphenyl‐1‐[(E)‐styryl]cyclopropane ( 22a ) to 3,4,4‐triphenylcyclopent‐1‐ene ( 23a ) in decalin furnished ΔH =31.0±1.2 kcal mol^?1 and ΔS =?6.0±2.6 e.u. The lowering of ΔH^≠ by 20 kcal mol^?1, compared with the rearrangement of the vinylcyclopropane parent, is ascribed to the stabilization of a transition structure (TS) with allylic diradical character. The racemization of (+)‐(S)‐ 22a proceeds with ΔH =28.2±0.8 kcal mol^?1 and ΔS =?5±2 e.u., and is at 150° 106 times faster than the rearrangement. Seven further 1‐(2‐arylethenyl)‐2,2‐diphenylcyclopropanes 22 , (E)‐ and (Z)‐isomers, were synthesized and characterized. The (E)‐compounds showed only modest substituent influence in their k_rac (at 119.4°) and k_isom (at 159.3°) values. The lack of solvent dependence of rate opposes charge separation in the TS, but a linear relation of log k_rac with log p.r.f., i.e., partial rate factors of radical phenylations of ArH, agrees with a diradical TS. The ring‐opening of the preponderant s‐trans‐conformation of 22 gives rise to the 1‐exo‐phenylallyl radical 26 that bears the diphenylethyl radical in 3‐exo‐position, and is responsible for racemization. The 1‐exo‐3‐endo‐substituted allylic diradical 27 arises from the minor s‐gauche‐conformation of 22 and is capable of closing the three‐ or the five‐membered ring, 22 or 23 , respectively. The discussion centers on the question whether the allylic diradical is an intermediate or merely a TS. Quantum‐chemical calculations by Houk et al. (1997) for the parent vinylcyclopropane reveal the lack of an intermediate. Can the conjugation of the allylic diradical with three Ph groups carve the well of an intermediate?     

Crystallographic report: Chloro[1,3‐bis[2‐[2‐[(4‐methoxybenzyl) amino]ethylamino]]‐2‐propanol]zinc(II) chloride hydrate, [(C23H36N4O3)ZnCl]Cl·H2O

The zinc(II) center in the molecule of [(C₂₃H₃₆N₄O₃)ZnCl]Cl·H₂O is coordinated by four nitrogen atoms of HL (1,3‐bis[2‐[2‐[(4‐methoxybenzyl) amino]ethylamino]]‐2‐propanol) and one chloro anion. The coordination moieties are connected by hydrogen bonds to form a one‐dimensional structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Thermal and photostabilization studies on carbohydrates functionalized with azo chromophoric system 2‐[(E)‐(3‐hydroxynaphthalen‐2‐yl)diazenyl]benzoic acid

In the present work, 2‐[(E)‐(3‐hydroxynaphthalen‐2‐yl)diazenyl]benzoic acid, an azo chromophoric system was prepared and incorporated onto carbohydrates such as starch and cellulose by dicyclohexylcarbodiimide coupling. The products were characterized by UV‐visible, fluorescence, FT‐IR and NMR spectroscopic methods. The results of the studies show that incorporation of the chromophoric system onto the polymeric core enhanced the light absorption, emission and light stabilization properties of the chromophoric system. The light fastening properties of chromophoric system and the carbohydrate‐bound photochromic systems were compared. It shows that light stabilization of the chromophoric system greatly enhanced on attaching to the polymeric core materials. Thermal stability of the chromophoric system also enhanced on attaching to the biopolymeric core systems. Copyright © 2013 John Wiley & Sons, Ltd.     

Kinetic studies on the hydrosilylation of phenylacetylene with R3SiH (R3 = PhMe2, Ph2Me,Ph3, Et3) using bis(1,2‐diphenylphosphinoethane)norbornadiene rhodium(I) hexafluorophosphate as catalyst

Product distribution and kinetic studies on the hydrosilylation of phenylacetylene by Ph₃SiH, Ph₂MeSiH, PhMe₂SiH and Et₃SiH were performed using bis‐[1,2‐diphenylphosphinoethane]norbornadienerhodium(I) hexafluorophosphate, 1, as catalyst. Pre‐equilibration of the catalyst with the acetylene produced hydrosilylations, pre‐equilibration with the silane did not. The catalyst showed a pronounced selectivity for cis‐addition to form β‐products, t‐PhCH­CHSiR₃, unlike most hydrosilylation catalysts. The kinetic studies showed a hydrosilylation reaction that is zero order with respect to both acetylene and the silane, with a dependency upon catalyst concentration. The k_obs value is directly influenced by the substituents on the silane: k(PhMe₂SiH) > k (Et₃SiH > k (Ph₂MeSiH) > k (Ph₃SiH). Intercalation of the catalyst in hectorite was not useful, since either no reaction occurred in non‐polar solvents, or extraction of the catalyst occurred in polar solvents to produce the same product distributions. Copyright © 2000 John Wiley & Sons, Ltd.     

Synthesis,characterization, and optimum reaction conditions of oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol

The reaction conditions of the oxidative polycondensation of 2‐[(pyridine‐2‐yl‐methylene) amino] phenol (2‐PMAP) with air O₂, H₂O₂, and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol (O‐2‐PMAP) was characterized with ¹H NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography (SEC), and elemental analysis techniques. Moreover, solubility testing of the oligomer was performed in polar and nonpolar organic solvents. With the NaOCl, H₂O₂, and air O₂ oxidants, the conversions of 2‐PMAP into O‐2‐PMAP were 98, 87, and 62%, respectively, in an aqueous alkaline medium. According to SEC, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of O‐2‐PMAP were 2262 g mol^?1, 2809 g mol^?1, and 1.24 with NaOCl, 3045 g mol^?1, 3861 g mol^?1, and 1.27 with air O₂, and 1427 g mol^?1, 1648 g mol^?1, and 1.16 with air H₂O₂, respectively. Also, thermogravimetric analysis showed that O‐2‐PMAP was stable against thermooxidative decomposition. The weight loss of O‐2‐PMAP was 96.68% at 900 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2717–2724, 2004     

Synthesis of poly(p‐phenylene vinylene)‐ and poly(phenylene ethynylene)‐based polymers containing p‐terphenyl in the main chain with alkoxyphenyl side groups

Starting from the pyrylium salt and following a facile synthetic route, we synthesized and polymerized 4,4″‐diiodo‐2′,6′‐di[4‐(2′‐ethylhexyl)oxy]phenyl‐p‐terphenyl with p‐divinylbenzene or p‐diethynylbenzene. The resulting polymers had moderate molecular weights, were amorphous, and dissolved in tetrahydrofuran and chloroform, with glass‐transition temperatures of 120–131 °C. The polymers behaved as violet‐blue‐emitting materials with photoluminescence maxima around 420 and 450 nm in solution and in thin films, respectively. They possessed well‐defined chromophores resulting from steric interactions in the polymer chain. The photoluminescence quantum yields were up to 0.29. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2591–2600, 2002