A novel cyclic dithiocarbonate having siloxane moiety; Approach to curable siloxane oligomer

A novel 5‐membered cyclic dithiocarbonate (DTC) having a siloxane moiety, 5‐(3‐trimethoxysilylpropyloxymethyl)‐1,3‐oxathiolane‐2‐thione, was synthesized from the corresponding epoxide precursor by its cycloaddition with carbon disulfide. The siloxane group underwent condensation reaction by the treatment with water and a basic or acidic catalyst, to afford the corresponding oligomer having siloxane main chain and DTC pendant. The resulting oligomer was liquid and soluble in organic solvents such as THF and chloroform. Treatment of the oligomer with amines resulted in selective ring‐opening reaction of the DTC group, generating a thiol group, which underwent oxidative coupling reaction to make the oligomer successfully cured. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4422–4430, 2005     

Novel siloxane‐carrying dithiol derived from 5‐membered cyclic dithiocarbonate and its curing reactions for coating application

A new efficient and straightforward method to convert amines into siloxane‐thiol hybrid molecules was developed. The method relies on the nucleophilic addition of amines to a cyclic dithiocarbonate having siloxane moiety (DTC‐Si), and the successive ring‐opening reaction of the dithiocarbonate moiety to give the corresponding acyclic thiourethane having a thiol moiety. Based on this method, amine‐terminated poly(propylene glycol) was successfully transformed into the corresponding polyether having thiol‐terminals and siloxane groups. In the presence of moisture, the alkoxysilyl moiety underwent condensation reaction to make the polyether cured into a transparent resin having solvent‐resistance. Addition of bisphenol A diglycidyl ether (Bis A‐DGE) to the curing process resulted in two simultaneous reactions, i.e., (1) condensation of siloxane part and (2) addition reaction of the thiol terminal and the epoxide group. When this curing process was carried out on a glass surface, the siloxane part reacted with silanol group on the surface, forming a coating layer having excellent mechanical toughness graded as maximum 7H by pencil toughness test (JIS‐K5400). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5119–5126, 2005     

Synthesis of reactive poly(norbornene): Ring‐opening metathesis polymerization of norbornene monomer bearing cyclic dithiocarbonate moiety

A norbornene monomer bearing cyclic dithiocarbonate moiety (NB‐DTC) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon disulfide. NB‐DTC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene). The dithiocarbonate moiety incorporated into the side chain of the obtained poly(norbornene) reacted with amine to afford the corresponding thiourethane moiety with thiol group, which underwent oxidative S‐S coupling and/or addition reaction to the C‐C double bond in the main chain, leading to formation of a cross‐linked polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis of polymers bearing 1,3‐benzoxazine moiety in the side chains from poly(allylamine) and their crosslinking behaviors

A polymer bearing 1,3‐benzoxazine moiety in the side chain was synthesized successfully from poly(allylamine) based on a stepwise strategy consisted of three steps: (1) treatment of poly(allylamine) with salicylaldehyde to convert the amino group in the side chain into the corresponding o‐(iminomethyl)phenol moiety, (2) reduction of the o‐(iminomethyl)phenol to obtain the corresponding o‐(aminomethyl)phenol moiety, and (3) formation of 1,3‐benzoxazine moiety by the reaction of the o‐(aminomethyl)phenol with formaldehyde. The content ratio of benzoxazine moieties and o‐(aminomethyl)phenol moieties in the polymer were tunable by varying amount of formaldehyde. The presence of o‐(aminomethyl)phenol moieties exhibited a significant promoting effect on the crosslinking reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Synthesis of an amphiphilic polymer having hydrophobic acetal and hydrophilic pyrrolidone moieties and its application to persisting release of aldehyde as a pro‐fragrance

A polymer having acetal moiety in the side chain was synthesized by a reaction of 1,3‐diol structure of poly(vinyl alcohol‐co‐N‐vinylpyrrolidone) and octanal. The hydrophobicity of the resulting acetal moiety and the hydrophilicity of the pyrrolidone moiety allowed the polymer to exhibit amphiphilicity. The polymer released octanal by hydrolysis of the acetal side chains under acidic conditions. The release of octanal was enhanced by the increased hydrophilicity of the polymer because of the presence of pyrrolidone moiety. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3816–3822, 2010     

Densely crosslinked polycarbosiloxanes. II: Thermal and mechanical properties

The thermal and mechanical properties of two densely crosslinked polycarbosiloxane systems were investigated in relation to the molecular structure. The networks were prepared from functional branched prepolymers and crosslinked via a hydrosilylation curing reaction. The prepolymers having only vinyl functionalities (poly[phenylmethylvinyl]siloxanes) were crosslinked by using crosslinking agents with reactive silicon–hydrogen groups. In prepolymers having both silicon–vinyl and silicon–hydrogen groups (poly[phenylmethylvinylhydro)]siloxanes crosslinking took place intermolecularly. The thermal and mechanical properties of the polymer networks were found to be dependent on the phenyl  Si O_3/2 (branches) content in the prepolymer, the number of elastically effective crosslinks, the elastically effective network chain density and molecular weight between crosslinks, length of the chain segments introduced by the hydrosilylation crosslinking reaction, and the number of dangling ends. As a consequence of the dense crosslinking, the mechanical properties were also strongly dependent on the glass transition temperature. A tough–brittle transition was observed around the glass transition temperature of the polymer networks. The properties of the poly(phenylmethylvinylhydro)siloxane networks were found to be superior to those of the poly(phenylmethylvinyl)siloxane networks. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1311–1331, 1997     

Synthesis of siloxane‐crosslinked polysilylenemethylenes by chlorodephenylation

Thermally stable polysilylenemethylenes (PSMs) with siloxane crosslinking moieties were successfully synthesized by chlorodephenylation of preformed poly(methylphenylsilylenemethylene) (PMPSM) and subsequent in situ alcoholysis/hydrolysis/condensation reactions. The simplified process and mild reaction conditions are quite advantageous. The crosslink density of these materials can be adjusted by the degree of chlorodephenylation, although an alkoxysilyl group remains to some extent. The resulting crosslinked PSMs have well defined structures in which the backbone is composed of MePhSiCH₂ and Me(MeO)SiCH₂ as well as Me(O_1/2)SiCH₂ as a crosslinking moiety. The resulting crosslinked PSMs exhibited glass‐transition temperatures ranging from 15 to 20 °C, whereas that of linear PMPSM was 22 °C. The crosslinked PSMs remained unchanged in weight below 300 °C, suggesting that they are thermally stable up to that temperature. The good solvent resistance caused by crosslinking as well as high thermal stability of these materials allow us to design new PSM‐based polymer blends and preceramic polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 416–422, 2002     

Polycondensation of trialkoxysilane monomers accelerated by neighboring group participation of urea moiety

(Phenylaminomethyl)trimethoxysilane (= α‐amino‐siloxane) was treated with various isocyanates to obtain a series of siloxanes having urea moieties (= α‐urea‐siloxanes). Their hydrolysis‐condensation reactions were monitored with ²⁹Si NMR, to reveal that they exhibited much higher reactivity than a urea‐siloxane derived from [3‐(phenylamino)propyl]trimethoxysilane (= γ‐amino‐siloxane). When compared with the derivation of the γ‐amino‐siloxane into the corresponding γ‐urea‐siloxane, those of the α‐amino‐siloxane into the corresponding α‐urea‐siloxanes were accompanied by much larger shifts of the ²⁹Si NMR signal toward a higher magnetic field. These results suggested that the location of the urea moiety in the α‐urea‐siloxanes was favorable to its intramolecular coordination to the silicon atom to exhibit its “neighboring group participation” that promoted transformation of the tetravalent silicon center into the pentavalent one, which is more electrophilic to make the siloxanes more susceptive to undergo the hydrolysis and condensation reactions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6654–6659, 2008     

Synthesis of copolymers containing a spiro orthocarbonate moiety and evaluation of the volume change during their cationic crosslinking

Spiro orthocarbonate (SOC) monomers having either an exomethylene group {3,3‐dimethyl‐9‐methylene‐1,5,7,11‐tetraoxaspiro[5.5]undecane (ExoSOC)} or an allyl group {9‐allyl‐3,3‐dimethyl‐1,5,7,11‐tetraoxaspiro[5.5]undecane (AllylSOC)} were radically copolymerized with vinyl monomers at several feed ratios to obtain the corresponding copolymers having SOC moieties in the side chain. The obtained copolymers were crosslinked via the double ring‐opening polymerization of the SOC moieties by a treatment with boron trifluoride etherate. The volume changes during the crosslinking of the copolymers were evaluated by density measurements with a gas pycnometer. As the SOC moiety composition increased, the volume shrinkage during the crosslinking was suppressed, and that finally changed into volume expansion. The volume changes during the crosslinking of the copolymers from AllylSOC were slightly larger than those of the copolymers from ExoSOC. The higher volume expansions in the crosslinking of AllylSOC‐based copolymers were ascribable to the lower steric hindrance around the SOC moieties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7040–7053, 2006     

Improvement of thermal stability of sulfonated polyphosphazenes by introducing a self‐crosslinkable group

We prepared sulfonated polyphosphazenes having various aryloxy substituents, and studied their thermal stabilities and membrane properties. Sulfonated polyphosphazenes were synthesized by the reaction of polydichlorophosphazene with sodium aryloxides and subsequent sulfonation with fuming sulfuric acid. With increasing the degree of sulfonation, the polymers showed higher proton conductivity, but suffered more from swelling in an aqueous solution. We introduced a hydroxymethylphenoxy group onto the phosphazene backbone as a self‐crosslinkable group by reaction of poly(dichlorophosphazene) and a sodium salt of 4‐hydroxymethylphenol. When a film of a sulfonated polymer having a methylol group was heated at 80 °C under vacuum for 1 h, it became insoluble in NMP, indicating the formation of a network structure. We investigated the crosslinking reaction of the polymers by DSC and FTIR. The crosslinking reaction proceeded only in the sulfonated polymers. Because the sulfonated polymers provide acidic protons, the methylol groups became more electrophilic and reacted with neighboring aromatic rings. A condensation reaction between themselves could also occur. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5850–5858, 2008     

Synthesis of networked polymers by crosslinking reactions of polybenzoxazine bearing allyl group in the side chain

A polybenzoxazine bearing allyl group in the side chain was synthesized by the ring‐opening polymerization of N‐allyl‐benzoxazine and was crosslinked by the two different processes, (1) thermally induced oligomerization of the allyl side chains and (2) radical addition of dithiol (thiol‐ene reaction) to the allyl side chains. The former process was promoted by adding 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane as a radical source, leading to the improved yield of the networked polymer isolated as acetone‐insoluble fraction. The thiol‐ene reaction with using 1,6‐hexanedithiol was also an efficient method for crosslinking the polybenzoxazine. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of sequence‐controlled copolymers from extremely polar and apolar monomers by living radical polymerization and their phase‐separated structures

A series of copolymers composed of two monomer units having a polar phosphorylcholine group and an apolar fluorocarbon group with a controlled monomer unit sequence were synthesized by a reversible addition‐fragmentation chain transfer (RAFT) living radical polymerization method. 2‐Methacryloyloxyethyl phosphorylcholine (MPC) and 2,2,2‐trifluoroethyl methacrylate (TFEMA) were selected as the monomers, because they have disparate polarity. Furthermore, to investigate the influence of the monomer unit sequence in a polymer chain on the phase‐separated structure in the bulk and surface structure, copolymers having a continuous change in the monomer unit composition along the polymer chain (gradient copolymer) were synthesized, as well as random and block copolymers. The analysis of instantaneous composition revealed a continuous change in the monomer unit composition in the gradient copolymer and the statistical monomer unit sequence in the random copolymer. Thermal analysis assumed that the gradient sequence of the monomer unit would make the phase‐separated structure in the bulk ambiguous, while the well‐defined and monodispersive block sequence would undergo the distinct phase‐separation due to the extreme difference in the polarity of the component monomer units. The preliminary surface characterization of the synthesized polymers indicated the monomer unit sequence in the polymer chain would much influence on the surface structure. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6073–6083, 2005     

Reduction of the 2‐azetidinone moiety in the polymer main chain: A novel synthetic route to polyamine with hydroxymethyl pendant

A polymer with a 2‐azetidinone moiety in its main chain was efficiently synthesized by [2 + 2] cycloaddition of bisimine with bisketene. The bisketene was easily prepared by dehydrochlorination of the corresponding dicarboxylic acid chloride and was used without purification. The treatment of the obtained polymer with lithium aluminum hydride resulted in a reductive ring‐opening reaction of the 2‐azetidinone moiety in the main chain that gave the corresponding linear polyamine with hydroxymethyl side chains. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3789–3796, 2001     

Synthesis and characterization of poly(DTC‐b‐PEG‐b‐DTC) triblock and poly(TMC‐b‐DTC‐b‐PEG‐b‐DTC‐b‐TMC) pentablock copolymers and kinetics of the polymerization

Dihydroxyl capped biodegradable poly(DTC‐b‐PEG‐b‐DTC) (BCB) triblock copolymer and poly(TMC‐b‐DTC‐b‐PEG‐b‐DTC‐b‐TMC) (ABCBA) pentablock copolymer have been synthesized by PEG and BCB copolymer as macroinitiator in the presence of yttrium tris(2,6‐di‐tert‐butyl‐4‐methylphenolate). The copolymers without random segments have been thoroughly characterized by ¹H, ¹³C‐NMR, SEC, and DSC. Molecular weights of the obtained copolymers are dependent on the amount of PEGs and coincide with the theoretical values. The exchange reaction of yttrium alkoxide and hydroxyl end group is essential for controlling the products' molecular weight. Their thermal behaviors are relevant to the chain lengths of PEG and PDTC segments. The Monte Carlo method has been developed to estimate the chain propagation constant and exchange reaction constant. In average, one exchange reaction will occur after approximately six monomer molecules insert into the growing chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1787–1796, 2005     

Acceleration effect of five‐membered cyclic dithiocarbonate on an epoxy–amine curing system

A bifunctional cyclic five‐membered dithiocarbonate (DTC), having a bisphenol A structure, was found to be an effective accelerator for a epoxy–amine curing system comprised of bisphenol A diglycidyl ether and amine‐terminated polypropylene glycol. The acceleration effect was evaluated by monitoring the time‐dependence of the storage modulus of the reaction mixture with a dynamic mechanical analyzer. The reactions involved in the curing system were investigated in detail by performing a series of model reactions using the corresponding monofunctional monomers. This investigation revealed that (1) DTC reacted with amine rapidly, (2) the reaction afforded the corresponding adduct having a thiourethane and thiol moieties, and (3) the thiol reacted rapidly with epoxide. The thiourethane moiety incorporated into the resulting adduct effectively catalyzed the reaction of epoxide and amine, and this catalysis was the predominant mechanism for the acceleration effect arisen by the addition of DTC. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4606–4611, 2007     

Synthesis of a norbornene monomer having cyclic carbonate moiety based on CO2 fixation and its transition metal‐catalyzed polymerizations

A norbornene monomer bearing cyclic carbonate moiety ( NB‐CC ) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon dioxide under atmospheric pressure, which was efficiently catalyzed by lithium bromide. NB‐CC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene), of which side chain inherited the cyclic carbonate moiety from the monomer without any deterioration. The same ROMP system was applicable to the copolymerization of NB‐CC and 5‐butyl‐2‐norbornene ( BNB ), which afforded the corresponding copolymer with a composition ratio same as a feed ratio. In addition, by using a catalytic system consisted of palladium (II) acetate/tricyclohexylphosphine/triphenylcarbenium tetrakis(pentafluorophenyl)borate, the copolymerization of NB‐CC and BNC proceeded successfully in a vinyl addition polymerization mode to give the corresponding poly(norbornene) having CC moiety in the side chain. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3896–3902, 2010     

Development of catalyst‐transfer condensation polymerization. Synthesis of π‐conjugated polymers with controlled molecular weight and low polydispersity

We describe the development of chain‐growth condensation polymerization for the synthesis of well‐defined π‐conjugated polymers via a new polymerization mechanism, catalyst‐transfer polymerization. We first studied the condensation polymerization of Grignard‐type hexylthiophene monomer with a Ni catalyst as a part of our research on chain‐growth condensation polymerization, and found that this polymerization also proceeded in a chain‐growth polymerization manner. However, the polymerization mechanism involving the Ni catalyst was different from that of previous chain‐growth condensation polymerizations based on substituent effects; the Ni catalyst catalyzed the coupling reaction of the monomer with the polymer, followed by the transfer of Ni(0) to the terminal C? Br bond of the elongated molecule. This catalyst‐transfer condensation polymerization is generally applicable for the synthesis of polythiophene with an etheric side chain and poly(p‐pheneylene), as well as for the synthesis of polyfluorene via the Pd‐catalyzed Suzuki–Miyaura coupling reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 753–765, 2008     

Ionic organic/inorganic materials. II. New linear and crosslinked poly(ethylene oxide)‐based ionomers by quaternization with chloroalkyl‐functionalized siloxanes

Siloxane‐modified cationic polyelectrolytes were synthesized through the quaternization reaction of a poly(ethylene glycol)‐based polymer containing tertiary amine groups in the chain with chloroalkyl‐functionalized siloxanes. Linear or crosslinked structures were obtained, depending on the functionality of the siloxane: a chloroalkyl‐monofunctionalized or ‐polyfunctionalized siloxane was used. The reaction occurred in solution with n‐propanol as a solvent and NaI as a catalyst. All products were characterized with elemental analysis and IR and ¹H NMR spectrometry. Viscometric measurements of the linear polymer in dilute aqueous solutions revealed typical polyelectrolyte behavior. The swelling capacities in various solvents of the crosslinked structures were determined. The thermal stability of the crosslinked cationic structures obtained with a polyfunctional siloxane as a quaternization agent was much higher than that of the parent polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3720–3728, 2004     

Poly(p‐benzamide) having isopropyl‐substituted chiral tri(ethylene glycol) side Chain: Synthesis and helical conformation

Isopropyl‐substituted tri(ethylene glycol) is used as a chiral side chain of N‐substituted poly(p‐benzamide) in order to increase the difference of stability between the right‐ and left‐handed helical structures of the polymer. The target polymer is synthesized by the chain‐growth condensation polymerization of the corresponding monomer with an initiator using lithium 1,1,1,3,3,3‐hexamethyldisilazide as a base. A circular dichroism (CD) study of the polymer reveals that the CD signal is due to an excess of a thermodynamically controlled right‐handed helical structure of the polymer, and that the replacement of the methyl group with a bulkier isopropyl group at the side chain of poly(p‐benzamide) increases the abundance of right‐handed helical structure in chloroform. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1623–1628