Investigation of glow discharge plasma for surface modification of polypropylene

Material surface properties of polymers, plastics, ceramics and textiles can be modified by atmospheric or low‐pressure glow discharge plasma. The aim of the present work is to study the surface modification of biaxially oriented polypropylene (BOPP) film in order to improve its hydrophilic and wetting properties. In this article we used low‐pressure, low‐temperature oxygen plasma for the surface treatment of BOPP. Scanning electron microscopy indicates that plasma treatment causes mainly physical changes by creating microcraters and roughness on the surface and increasing surface friction. Attenuated total reflectance infrared spectra show oxygen‐containing groups such as ? OH at 3513 cm^?1 and C?O at 1695 cm^?1. Microscopic investigations of water droplets on BOPP (treated, untreated) show that the interfacial adhesion of treated surfaces is increased. Copyright © 2003 John Wiley & Sons, Ltd.     

Nitrogen‐Doped Carbon Monolith for Alkaline Supercapacitors and Understanding Nitrogen‐Induced Redox Transitions

A nitrogen‐doped porous carbon monolith was synthesized as a pseudo‐capacitive electrode for use in alkaline supercapacitors. Ammonia‐assisted carbonization was used to dope the surface with nitrogen heteroatoms in a way that replaced carbon atoms but kept the oxygen content constant. Ammonia treatment expanded the micropore size‐distributions and increased the specific surface area from 383 m² g^?1 to 679 m² g^?1. The nitrogen‐containing porous carbon material showed a higher capacitance (246 F g^?1) in comparison with the nitrogen‐free one (186 F g^?1). Ex situ electrochemical spectroscopy was used to investigate the evolution of the nitrogen‐containing functional groups on the surface of the N‐doped carbon electrodes in a three‐electrode cell. In addition, first‐principles calculations were explored regarding the electronic structures of different nitrogen groups to determine their relative redox potentials. We proposed possible redox reaction pathways based on the calculated redox affinity of different groups and surface analysis, which involved the reversible attachment/detachment of hydroxy groups between pyridone and pyridine. The oxidation of nitrogen atoms in pyridine was also suggested as a possible reaction pathway.     

Characterization and cytocompatibility of polydopamine on MAO‐HA coating supported on Mg‐Zn‐Ca alloy

Magnesium has been suggested as a potential biodegradable metal for the usage as orthopaedic implants. However, high degradation rate in physiological environment remains the biggest challenge, impeding wide clinical application of magnesium‐based biomaterials. In order to reduce its degradation rate and improve the biocompatibility, micro‐arc oxidation coating doped with HA particles (MAO‐HA) was applied as the inner coating, and polydopamine (PDA) film was synthesized by dopamine self‐polymerization as the outer coating. The microstructure evolution of the coating was characterized using scanning electron microscopy (SEM), atomic force microscope (AFM), X‐ray diffraction analyses (XRD), Fourier transform infrared spectroscopy (FT‐IR), and X‐ray photoelectron spectroscopy (XPS). The results showed that PDA film had covered the entire surface of MAO‐HA coating and the pore size of MAO‐HA coating decreased. The root mean square (RMS) roughness of PDA/MAO‐HA coatings was approximately 106.46 nm, which was closer to the optimum surface roughness for cellular attachment as compared with MAO‐HA coatings. Contact angle measurement indicated that the surface wettability had been transformed from hydrophobic to hydrophilic due to the introduction of PDA. The PDA/MAO‐HA coatings exhibited better corrosion resistance in vitro, with the self‐corrosion potential increasing by 150 mV and the corrosion current density decreasing from 2.09 × 10^?5 A/cm ² to 1.46 × 10^?6 A/cm ² . In hydrogen evolution tests, the corrosion rates of the samples coated with PDA/MAO‐HA and MAO‐HA were 4.40 and 5.95 mm/y, respectively. MTS assay test and cell‐surface interactions experiment demonstrated that PDA/MAO‐HA coatings exhibited good cellular compatibility and could promote the adhesion and proliferation of MC3T3‐E1 cells.     

Nitrogen‐Doped Hollow Amorphous Carbon Spheres@Graphitic Shells Derived from Pitch: New Structure Leads to Robust Lithium Storage

Nitrogen‐doped mesoporous hollow carbon spheres (NHCS) consisting of hybridized amorphous and graphitic carbon were synthesized by chemical vapor deposition with pitch as raw material. Treatment with HNO₃ vapor was performed to incorporate oxygen‐containing groups on NHCS, and the resulting NHCS‐O showed excellent rate capacity, high reversible capacity, and excellent cycling stability when tested as the anode material in lithium‐ion batteries. The NHCS‐O electrode maintained a reversible specific capacity of 616 mAh g^?1 after 250 cycles at a current rate of 500 mA g^?1, which is an increase of 113 % compared to the pristine hollow carbon spheres. In addition, the NHCS‐O electrode exhibited a reversible capacity of 503 mAh g^?1 at a high current density of 1.5 A g^?1. The superior electrochemical performance of NHCS‐O can be attributed to the hybrid structure, high N and O contents, and rich surface defects.     

Voltammetric Sensor for Sodium Nitroprusside Determination in Biological Fluids Using Films of Poly‐L‐Lysine

Sodium nitroprusside (NP), a commercial vasodilator, can be pre‐concentrated on vitreous carbon electrode modified by films of 97.5%: 2.5% poly‐L ‐lysine (PLL): glutaraldehyde (GA). This coating gives acceptable anion exchange properties whilst giving the required improvement of adhesion to the glassy carbon electrode surface. Linear response range and detection limit on nitroprusside in B‐R buffer pH 4.0, were 1×10^?6 to 2×10^?5 mol L^?1 and 1×10^?7 mol L^?1, respectively. The repeatability of the proposed sensor, evaluated in term of relative standard deviation, was measured as 4.1% for 10 experiments. The voltammetric sensor was directly applied to determination of nitroprusside in human plasma and urine samples and the average recovery for these samples was around 95–97% without any pre treatment.     

An improvement on the adhesion‐strength of laminated ultra‐high‐molecular‐weight polyethylene fabrics: surface‐etching/modification using highly effective helium/oxygen/nitrogen plasma treatment

In this study, helium/oxygen/nitrogen (He/O₂/N₂)‐plasma was used to etch/modify the surface of ultra‐high‐molecular‐weight polyethylene (UHMWPE) fiber. After coated with polyurethane (PU), the plasma treated UHMWPE fabrics were laminated. It was found that the values of peeling strength between the laminated UHMWPE fabrics treated with He/O₂/N₂‐plasma were significantly higher (3–4 times) than that between pristine fabrics. The hydrophilic property and the value of the surface roughness of the UHMWPE fibers increased significantly after treated with He/O₂/N₂‐plasma. The mechanism of the oxidation/degradation of the polymers on the surface of the UHMWPE fiber during He/O₂/N₂‐plasma treatment was suggested. In addition, it was found that the higher content of functional groups (carbonyl, aldehyde, and carboxylic acid) on fiber surface and the higher value of surface roughness of the UHMWPE fiber treated with He/O₂/N₂‐plasma could significantly improve the adhesion‐strength of the laminated UHMWPE fabric. Especially, the micro‐aperture on the surface of UHMWPE fiber caused by the strenuous etching of He/O₂/N₂‐plasma treatment was also an important factor on improving the adhesion‐strength between the laminated UHMWPE fabrics. Copyright © 2010 John Wiley & Sons, Ltd.     

Increased interfacial adhesion between carbon fiber and poly(vinylidene fluoride) by an aqueous sizing agent

The adhesion behavior of poly(vinylidene fluoride) (PVDF) to carbon fiber (CF) has always been a huge challenge, on account of the inertness nature of PVDF and the lack of reactive functional groups. In this work, a novel maleic anhydride grafted PVDF (MPVDF) aqueous sizing agent was prepared to modify the interface between CF and PVDF matrix. The surface properties of desized, MPVDF‐sized, and PVDF‐sized carbon fibers were characterized by the scanning electron microscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, and dynamic contact angle analysis test. The results demonstrated that the surface roughness increased from 39 to 55 nm, and surface energy increased from 40 to 74 mN m^?1 after MPVDF sizing treatment. The content of activated carbon atoms increased from 31.0% to 48.4%. Subsequently, the interlaminar shear strength was examined, for which was a critical indicator of the interfacial adhesion between CF and matrix. Compared with the desized CF, the value of interlaminar shear strength increased from 14.8 MPa to 25.5 MPa improved by 72% because of the improved H‐bonding formation, surface roughness, and wettability for MPVDF‐sized CF. In addition, the flexural strength and modulus were also improved by 47% and 74%, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of the surface condition of silicas with grafted monofunctional polyfluoroalkylsilanes on the adsorption of polar molecules

Lyophobized silicas containing relatively small numbers of grafted perfluorohexyl (1.1 nm^?2) and perfluorobutyl (1.7 nm^?2) groups are studied by means of gas chromatography, adsorption under static conditions, and IR spectroscopy. The results are compared to those obtained by us previously for a series of samples with dense polyfluoroalkyl monolayers (≥2.0 nm^?2). Effects related to the influence of the grafting density and the size of fluorine-containing groups on the adsorption of polar compounds and the hydrophobicity of the surface are discussed.     

Mussel‐inspired method to decorate commercial nanofiltration membrane for heavy metal ions removal

Nanofiltration (NF) membranes have been widely used for the treatment of electroplating, aerospace, textile, pharmaceutical, and other chemical industries. In this work, halloysite nanotubes (HNTs) were directly anchored on the surface of commercial nanofiltration (NF) membrane by dopamine modification following advantageous bio‐inspired methods. SEM and AFM images were used to characterize the HNTs decorated membrane surface in terms of surface morphology and roughness. Water contact angle (WCA) was employed in evidencing the incorporation of HNTs and dopamine in terms of hydrophilicity or hydrophobicity. Augmentation of HNTs was found to obviously enhance the hydrophilicity and surface roughness resulting in improved water permeability of membrane. More importantly, the rejection ratios of membrane also increased during the removal of heavy metal ions from wastewater. The permeability and Cu²⁺ rejection ratio of modified NF membrane were as high as 13.9 L·m^?2·h^?1·bar^?1 and 74.3%, respectively. Incorporation of HNTs was also found to enhance the anti‐fouling property and stability of membrane as evident from long‐term performance tests. The relative concentration of HNTs and dopamine on membrane surface was optimized by investigating the trade‐off between water permeability and rejection ratio.     

Bacterial attachment on reactive ceramic ultrafiltration membranes

Bacterial attachment is an initial stage in biofilm formation that leads to flux decline in membrane water filtration. This study compares bacterial attachment among three photocatalytic ceramic ultrafiltration membranes for the prevention of biofilm formation. Zirconia ceramic ultrafiltration membranes were dip-coated with anatase and mixed phase titanium dioxide photocatalysts to prevent biofilm growth. The membrane surface was characterized in terms of roughness, hydrophobicity, bacterial cell adhesion, and attached cell viability, all of which are important factors in biofilm formation. The titanium dioxide coatings had minimal impact on the membrane roughness, reduced the hydrophobicity of membranes, prevented Pseudomonas putida attachment, and reduced P. putida viability. Degussa P25 is a particularly promising reactive coating because of its ease of preparation, diminished cell attachment and viability in solutions with low and high organic carbon concentrations, and reduced flux decline. These reactive membranes offer a promising strategy for fouling resistance in water filtration systems.     

Synthesis of Hierarchically Porous Sandwich‐Like Carbon Materials for High‐Performance Supercapacitors

For the first time, hierarchically porous carbon materials with a sandwich‐like structure are synthesized through a facile and efficient tri‐template approach. The hierarchically porous microstructures consist of abundant macropores and numerous micropores embedded into the crosslinked mesoporous walls. As a result, the obtained carbon material with a unique sandwich‐like structure has a relatively high specific surface (1235 m² g^?1), large pore volume (1.30 cm³ g^?1), and appropriate pore size distribution. These merits lead to a comparably high specific capacitance of 274.8 F g^?1 at 0.2 A g^?1 and satisfying rate performance (87.7 % retention from 1 to 20 A g^?1). More importantly, the symmetric supercapacitor with two identical as‐prepared carbon samples shows a superior energy density of 18.47 Wh kg^?1 at a power density of 179.9 W kg^?1. The asymmetric supercapacitor based on as‐obtained carbon sample and its composite with manganese dioxide (MnO₂) can reach up to an energy density of 25.93 Wh kg^?1 at a power density of 199.9 W kg^?1. Therefore, these unique carbon material open a promising prospect for future development and utilization in the field of energy storage.     

Chemical modification of zeolite beta surface and its effect on gas permeation of mixed matrix membrane

Chemical modification of zeolite beta (BEA) with a series of organosilane compounds [R(CH₃)_nSiX_(3‐n), where X is a chloro or alkoxy group with n = 0 and 2, and R is an alkyl chain varying from CH₃ to C₁₈H₃₇] was investigated. The results of FT‐IR and ²⁹Si CP/MAS NMR indicated that the alkylsilyl species were covalently anchored onto the BEA surface. Grafting density of the alkylsilyl species was determined by CHN elemental analysis and thermogravimetric analysis (TGA). Evidently, it can be adjusted by varying the reaction time and organosilane concentration. The reaction kinetics was found to resemble the kinetics of the well‐known monolayer formation, i.e. SAMs. The kinetic plot illustrated two distinct regions, a rapid attachment followed by a gradual increase of grafting density. The degradation temperature at maximum rate (T_max) of the surface‐grafted BEA was observed in the range of 440–460°C. The modified BEA showed surface hydrophobic characteristic by having a strong affinity to the non‐polar n‐heptane. Good particle distribution and strong interfacial adhesion were observed in the mixed matrix membranes of the BEA grafted with C₃H₇ to C₁₈H₃₇. The grafted chain length was found to have an effect on gas permeability. Carbon dioxide, oxygen, and ethylene permeabilities of the membranes containing the unmodified BEA were comparable to those of the CH₃Si‐grafted BEA. Interestingly, the membranes containing the BEA grafted with C₃H₇ to C₁₈H₃₇ species showed enhancement of the carbon dioxide permeability. Affinity of the long alkyl chain to carbon dioxide probably caused the increase of carbon dioxide permeability. Copyright © 2008 John Wiley & Sons, Ltd.     

Control of endothelial cell adhesion to polymer surface by ion implantation

The bio‐compatibility of ion implanted polymers has been studied by means of in vitro attachment measurements of bovine aorta endothelial cells. The specimens used were polystyrene (PS), polyethylene (PE), polypropylene (PP) and expanded polytetrafluoroethylene (ePTFE). He⁺ and Ne⁺ ion implantation were performed at an energy of 150 keV with fluences between 1 × 10 ¹³ to 1 × 10 ¹⁷ ions/cm ² at room temperature. Wettability was estimated by means of a sessile drop method. The chemical and physical structures of ion implanted polymers were investigated by contact angle measurements, atomic force microscopy and X‐ray photoelectron spectroscopic analysis in relation to cell attachment behavior. The strength of cell attachment on ion implanted specimens at static and under flow conditions was also measured. Ion implanted PP and ePTFE were found to exhibit remarkably higher adhesion and spreading of endothelial cells than non‐implanted specimens. In contrast to these findings, ion implanted PS and PE only demonstrated a little improvement of cell adhesion in this assay. Copyright © 2001 John Wiley & Sons, Ltd.     

Photodegradation of poly(ether sulphone) Part 1. A time‐of‐flight secondary ion mass spectrometry study

An extensive study of the surface chemical changes to poly(ether sulphone) (PES) ultrafiltration membranes is made for the first time by the use of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) after photoirradiation at 254 nm with irradiances varying from 10 to 300 mJ cm^?2 in a nitrogen atmosphere. Complementary information is provided by analysis with x‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR). The versatility, superior specificity and sensitivity of using ToF‐SIMS to investigate degradation phenomena are highlighted. The combined results demonstrate that photoirradiation causes a number of chemical changes to the surface: incorporation of oxygen; degradation of the benzene rings and formation of oxidized carbon species; depletion of carbon; reduction of ? SO₂? to some extent; formation of ? OH, C?O and ? SO₃H groups; and probable formation of ? C₆H₄? O? C₆H₅ end‐groups. In addition, no ? OSO₃H groups are formed and no formation of SO₂ is detected. Also, it is shown that chain scission dominates below an irradiation dose of ～200 mJ cm^?2 (at 254 nm in a nitrogen atmosphere). At higher doses, cross‐linking becomes dominant. Copyright © 2004 John Wiley & Sons, Ltd.     

Multilayer graphene/amorphous carbon hybrid films prepared by microwave surface‐wave plasma CVD: synthesis and characterization

Hybrid films of multilayer graphene (MG) containing amorphous carbon (a‐C) were synthesized on Al substrates by microwave surface‐wave plasma chemical vapor deposition. Raman scattering and surface transmission electron microscopy showed that the carbon films contained a large quantity of MG when a radio frequency (RF) substrate bias was not applied. Amorphization of graphene in the carbon film was promoted by applying an RF bias, which generated Ar⁺ in the plasma. The bandgaps of the films were found to increase as the Raman intensity ratios between the 2D‐band (at 2700 cm^?1) and D‐band (at 1350 cm^?1) decreased, indicating the formation of a‐C. The MG/a‐C all‐sp² phase of carbon hybrid films exhibited an increase in current density under 5 mW/cm² of AM1.5G solar simulated irradiation as the RF bias increased because of Ar⁺‐induced amorphization of the graphene. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface analysis of high performance carbon/bismaleimide composites exposed to electron irradiation

The aim of this article was to investigate the effects of electron irradiation in ultrahigh vacuum environment on the surface properties of high‐performance carbon/bismaleimide (BMI) composites used in aerospace. The changes in surface chemical composition with increasing irradiation fluence were studied by XPS. The evolution of surface morphology and surface roughness were observed by atomic force microscopy (AFM). The mass loss behavior occurring in the surface layer of the composites was examined. The results indicated that the electron irradiation in high vacuum caused rupture of chemical bonds and cross‐linking process in the surface layer, thereby leading to the mass loss behavior and the formation of carbonification layer in the surface of the carbon/BMI composites. The changes in the surface chemical composition were determined by a competing effect existing between the rupture of chemical bonds and the cross‐linking process at lower irradiation fluence, and by a degradation process only at higher fluence of electron irradiation. The surface morphology was altered and the surface roughness was increased significantly after electron irradiation. The mass loss ratio first increased obviously at lower fluences, and then reached a plateau value of 0.45% beyond 5 × 10¹⁵ cm^?2 fluence of electron irradiation. Copyright © 2011 John Wiley & Sons, Ltd.     

Mechanistic Insights into an Unexpected Carbon Dioxide Insertion Reaction through the Crystal Structures of Carbamic Diphenylthiophosphinic Anhydride and l‐[(4‐Nitrophenyl)‐sulfonyl]‐trans‐2,5‐pyrrolidinedicarboxylic Acid Methyl Ester

The crystal structures of an unexpected carbon dioxide inserted carbamidiphenylthiophosphinic anhydride and l‐[(4‐nitrophenyl) sulfonyl]‐trans‐2, 5‐pyrrolidinedicarboxylic acid methyl ester were determined by X‐ray analysis. They crystallized in the space group P2₁(#4) with a =0.9550(2), b = 0.9401(4), c= 1.2880(2) nm, β= 107.74°, V= 1.1013 (5) nm³, D_caled= 1.349 g/cm³, Z = 2 and P2₁2₁2₁(# 19) with a = 1.4666(2), b = 0.7195(2), c = 1.6339(2) nm, V = 1.7240(7) nm³, D_caled = 1.434 g/cm³, Z = 4, respectively. Through the investigation of these two crystal structures, the mechanistic insights into this unexpected carbon dioxide insertion in the reaction of trans‐2,5‐disubstituted pyrrolidine with diphenylthiophosphoryl chloride in the presence of potassium carbonate were disclosed.     

Thermodynamics of Carbon Dioxide Adsorption on the Protonic Zeolite H‐ZSM‐5

Adsorption of carbon dioxide on H‐ZSM‐5 zeolite (Si:Al=11.5:1) was studied by means of variable‐temperature FT‐IR spectroscopy, in the temperature range of 310–365 K. The adsorbed CO₂ molecules interact with the zeolite Brønsted‐acid OH groups bringing about a characteristic red‐shift of the O? H stretching band from 3610 cm^?1 to 3480 cm^?1. Simultaneously, the ν₃ mode of adsorbed CO₂ is observed at 2345 cm^?1. From the variation of integrated intensity of the IR absorption bands at both 3610 and 2345 cm^?1, upon changing temperature (and CO₂ equilibrium pressure), the standard adsorption enthalpy of CO₂ on H‐ZSM‐5 is ΔH⁰=?31.2(±1) kJ mol^?1 and the corresponding entropy change is ΔS⁰=?140(±10) J mol^?1 K^?1. These results are discussed in the context of available data for carbon dioxide adsorption on other protonic, and also alkali‐metal exchanged, zeolites.     

Triarylboron‐Linked Conjugated Microporous Polymers: Sensing and Removal of Fluoride Ions

A luminescent conjugated microporous polymer (BCMP‐3) has been synthesized in high yield by a carbon–carbon coupling reaction using triarylboron as a building unit. BCMP‐3 was fully characterized by using powder X‐ray diffraction analysis, Fourier transform infrared spectroscopy, ¹³C solid‐state NMR spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, and nitrogen and carbon dioxide adsorption. The new three‐dimensional conjugated framework possess a high Brunauer–Emmett–Teller (BET) specific surface area up to 950 m² g^?1 with a pore volume of 0.768 cm³ g^?1, good stability, and abundant boron sites in the skeleton. Under excited‐light irradiation, BCMP‐3 exhibits strong fluorescent emission at 488 nm with a high absolute quantum yield of 18 % in the solid state. Polymer BCMP‐3 acts as a colorimetric and fluorescent chemosensor with high sensitivity and selectivity for F^? over other common anions. In addition, the polymer also works as an adsorbent for F^? removal and shows good adsorption capacities of up to 24 mg g^?1 at equilibrium F^? concentrations of 16 mg L^?1 and a temperature of 298 K. The adsorption kinetics and isotherm were analyzed by fitting experimental data with pseudo‐second‐order kinetics and Langmuir equations. Furthermore, we highlight that BCMP‐3 is an adsorbent for fluoride removal that can be efficiently reused many times without loss of adsorption efficiency.     

Carboxyphenyl Covalent Immobilization of Heme Proteins and its Favorable Biocompatible Electrochemical and Electrocatalytic Characteristics

A novel carboxyphenyl covalent immobilization technique has been successfully developed to realize the effective attachment of two typical heme proteins, hemoglobin (Hb) and cytochrome c (Cyt‐c), onto underlying glassy carbon electrode (GCE). Primarily, the GCE surface is functionalized with aromatic 4‐carboxyphenyl (4‐CP) group by the electrochemical reduction of diazonium cations, producing covalently linked carboxyl‐terminated active GCE surface to work as a ‘bridge’. Then, Hb and Cyt‐c are readily attached to GCE through the ‘bridge’ by functional covalently combination between ? NH₂ terminal groups of proteins and ? COOH terminal groups of 4‐CP, obtaining Hb/4‐CP/GCE and Cyt‐c/4‐CP/GCE. On both electrodes, well‐defined peaks attributing to the Fe^III/Fe^II couple of heme group of Hb and Cyt‐c are clearly observed with the electron transfer rate constant (k_s) evaluated to be 2.48±0.05 s^?1 and 2.73±0.05 s^?1, respectively. It is attractive that the formal potential (E°') of the immobilized Hb and Cyt‐c are estimated to be 50 and 100 mV (vs. SCE), respectively, which are closer to the standard redox potential of native Hb and Cyt‐c in solution, owing to the good biocompatibility of 4‐CP groups. The electrodes also exhibit fast response, high sensitivity and well stability for the amperometric detection of H₂O₂ at a fairly mild potential of 0 V without any mediators, obtaining rather small apparent Michaelis‐Menten constant (K_M^app) values of 113 μM for Hb/4‐CP/GCE and 101 μM for Cyt‐c/4‐CP/GCE. All the experimental results indicated that the covalent graft 4‐carboxyphenyl group plays an important role in constructing a “biocompatible bridge” to help the direct electron transfer of Hb and Cyt‐c with favorable biocompatibility and good bio‐ electrocatalytic affinity in virtue of the substituted aryl group only consisting of C, H and O elements, which is similar with the constitutes of organics. It makes the system of functionalized covalent immobilization of proteins onto carbon electrode a promising platform for fabricating the third‐generation biosensors. A new approach for realizing direct electrochemistry of proteins, as well as design of novel bioelectronic devices has been accordingly provided.