共查询到20条相似文献,搜索用时 31 毫秒
1.
Kensuke Naka Shinsuke Inagi Yoshiki Chujo 《Journal of polymer science. Part A, Polymer chemistry》2005,43(19):4600-4608
A new electron‐donating polymer composed of a vinylogous tetrathiafulvalene (TTF) unit was prepared by the oxidative dimerization of 1,4‐bisdithiafulvenyl‐2,5‐didodecyloxybenzene using iodine. The polymer was soluble in common organic solvents such as CHCl3 and toluene. The number‐average molecular weight of the polymer with dodecyloxy group was 24,900 determined from GPC. The UV–vis spectrum of the polymer showed the absorption maxima at 587, 712, and 803 nm, which are due to a cation radical of the vinylogous TTF unit in the polymer. The reduction of the polymer to its neutral state was performed using sodium hydrogen sulfite. The structure of the polymer was confirmed by 1H NMR and UV–vis spectra compared with that of a dimer model compound prepared by oxidation of 1‐dithiafulvenyl‐2,5‐didodecyloxybenzene using iodine. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4600–4608, 2005 相似文献
2.
Kensuke Naka Takashi Uemura Yoshiki Chujo 《Journal of polymer science. Part A, Polymer chemistry》2001,39(23):4083-4090
A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)2Cl2] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001 相似文献
3.
Koji Takagi Hyunho Joo Yusuke Yamashita Eiki Kawagita Chikako Torii 《Journal of polymer science. Part A, Polymer chemistry》2011,49(18):4013-4020
2,5‐Dibromo‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene ( DBPyTh ) was synthesized by the Suzuki coupling reaction between two aromatic compounds followed by the bromination. The Grignard metathesis reaction of DBPyTh with isopropylmagnesium chloride proceeded in 85% conversion and the regioselective halogen–metal exchange at the 2‐position was confirmed. Namely, 5‐bromo‐2‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene and 2‐bromo‐5‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene were generated in 90:10 molar ratio. Subsequently, the Kumada coupling polymerization was carried out using 1,3‐bis(diphenylphosphinopropane)nickel(II) dichloride to obtain poly(3‐(6′‐hexylpyridine‐2′‐yl)thiophene) ( PolyPyTh ). The polymer molecular weight could be roughly controlled by the catalyst concentration and the molecular weight distribution ranged from 1.25 to 1.80. The gas chromatograph analysis indicated that 5‐bromo‐2‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene was preferentially polymerized in 90% conversion and the percentage of the head‐to‐tail content (regioregularity) was calculated to be 96%. The matrix‐assisted laser desorption/ionization time‐of‐fright mass spectrum indicated that both polymer chain ends were substituted with the hydrogen atom. The absorption maxima of polymer in CHCl3 and thin film were observed at 447 and 457 nm, respectively, which were blue‐shifted compared with poly(3‐(4′‐octylphenyl)thiophene). From the CV measurement of the polymer thin film, highest occupied molecular orbital (HOMO) (?5.31 eV) and lowest unoccupied molecular orbital (LUMO) (?3.76 eV) energy levels were calculated from the oxidation and reduction onset potentials, respectively, and the electrochemical band gap energy was determined to be 1.62 eV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献
4.
Weiwei Li Yang Han Binsong Li Caiming Liu Zhishan Bo 《Journal of polymer science. Part A, Polymer chemistry》2008,46(13):4556-4563
Zero‐valent palladium complex, Pd(PTh3)3, with three tri(2‐thienyl)phosphine ligands was prepared and characterized. Pd(PTh3)3 is superior to Pd(PPh3)4 in catalyzing Suzuki‐Miyaura coupling and polymerization of thiophene‐based derivatives. The Suzuki polycondensation of 3‐hexyl‐5‐iodothiophene‐2‐boronic pinacol ester with Pd(PTh3)3 as the catalyst precursor afforded high‐molecular‐weight P3HT with high regularity and yield. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4556–4563, 2008 相似文献
5.
Junpei Miyake Yoshiki Chujo 《Journal of polymer science. Part A, Polymer chemistry》2008,46(18):6035-6040
A novel hybrid‐type chiral binaphthyl‐based polyarylene derivative with polyhedral oligomeric silsesquioxanes (POSS) units 2a was prepared by Suzuki–Miyaura coupling polymerization from a chiral (R)‐6,6′‐dibromo‐2,2′‐diPOSS‐substituted 1,1′‐binaphthyl derivative 1a and p‐biphenylene diboronic acid. As a reference, a binaphthyl‐based polyarylene derivative without POSS unit 2b was also prepared. The obtained polymers were studied with thermogravimetric analysis, optical rotations, circular dichroism (CD), ultraviolet‐visible, and photoluminescence (PL) spectra. Gel permeation chromatography measurements of 2a and 2b showed that their number‐average molecular weights were 13,300 and 16,500, respectively. The thermal stability of POSS‐modified polymer 2a (temperature of 10% weight loss; T10 = 380 °C) was extremely high compared with that of polymer without POSS unit 2b (T10 = 335 °C) due to the siliceous bulky POSS segments on the side chains. The specific optical rotation [α]D was ?66.7° (c 0.06, CHCl3) for 2a and ?62.3° (c 0.06, CHCl3) for 2b . The CD spectra showed that these two polymers had very similar and strong Cotton effects. Film polymer 2a showed almost the same PL spectrum as that in dilute CHCl3 solution, indicating that bulky POSS units strongly suppressed intermolecular aggregation of the π‐conjugated polymer backbone. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6035–6040, 2008 相似文献
6.
Yutaka Nanashima Rena Shibata Ryo Miyakoshi Akihiro Yokoyama Tsutomu Yokozawa 《Journal of polymer science. Part A, Polymer chemistry》2012,50(17):3628-3640
Kumada‐Tamao coupling polymerization of 6‐bromo‐3‐chloromagnesio‐2‐(3‐(2‐methoxyethoxy)propyl)pyridine 1 with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of boronic ester monomer 2 , which has the same substituted pyridine structure, with tBu3PPd(o‐tolyl)Br were investigated for the synthesis of a well‐defined n‐type π‐conjugated polymer. We first carried out a model reaction of 2,5‐dibromopyridine with 0.5 equivalent of phenylmagnesium chloride in the presence of Ni(dppp)Cl2 and then observed exclusive formation of 2,5‐diphenylpyridine, indicating that successive coupling reaction took place via intramolecular transfer of Ni(0) catalyst on the pyridine ring. Then, we examined the Kumada‐Tamao polymerization of 1 and found that it proceeded homogeneously to afford soluble, regioregular head‐to‐tail poly(pyridine‐2,5‐diyl), poly(3‐(2‐(2‐(methoxyethoxy)propyl)pyridine) (PMEPPy). However, the molecular weight distribution of the polymers obtained with several Ni and Pd catalysts was very broad, and the matrix‐assisted laser desorption ionization time‐of‐flight mass spectra showed that the polymer had Br/Br and Br/H end groups, implying that the catalyst‐transfer polymerization is accompanied with disproportionation. Suzuki‐Miyaura polymerization of 2 with tBu3PPd(o‐tolyl)Br also afforded PMEPPy with a broad molecular weight distribution, and the tolyl/tolyl‐ended polymer was a major product, again indicating the occurrence of disproportionation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
7.
Bungo Ochiai Kouichi Yoshii Daisuke Nagai Takeshi Endo 《Journal of polymer science. Part A, Polymer chemistry》2005,43(5):1014-1018
The cationic ring‐opening polymerization of a seven‐membered cyclic monothiocarbonate, 1,3‐dioxepan‐2‐thione, produced a soluble polymer through the selective isomerization of thiocarbonyl to a carbonyl group {? [SC(C?O)O(CH2)4]n? }. The molecular weights of the polymer could be controlled by the feed ratio of the monomer to the initiators or the conversion of the monomer during the polymerization, although some termination reactions occurred after the complete consumption of the monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1014–1018, 2005 相似文献
8.
Akiko Nakahashi Masaki Fujita Eisuke Miyoshi Tomokazu Umeyama Kensuke Naka Yoshiki Chujo 《Journal of polymer science. Part A, Polymer chemistry》2007,45(16):3580-3587
The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by 1H and 13C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl3. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007 相似文献
9.
Kotohiro Nomura Yoshitaka Miyamoto Hisao Morimoto Yves Geerts 《Journal of polymer science. Part A, Polymer chemistry》2005,43(23):6166-6177
Factors affecting the syntheses of high‐molecular‐weight poly(2,5‐dialkyl‐1,4‐phenylene vinylene) by the acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzenes [alkyl = n‐octyl ( 2 ) and 2‐ethylhexyl ( 3 )] with a molybdenum or ruthenium catalyst were explored. The polymerizations of 2 by Mo(N‐2,6‐Me2C6H3) (CHMe2 Ph)[OCMe(CF3)2]2 at 25 °C was completed with both a high initial monomer concentration and reduced pressure, affording poly(p‐phenylene vinylene)s with low polydispersity index values (number‐average molecular weight = 3.3–3.65 × 103 by gel permeation chromatography vs polystyrene standards, weight‐average molecular weight/number‐average molecular weight = 1.1–1.2), but the polymerization of 3 was not completed under the same conditions. The synthesis of structurally regular (all‐trans), defect‐free, high‐molecular‐weight 2‐ethylhexyl substituted poly(p‐phenylene vinylene)s [poly 3 ; degree of monomer repeating unit (DPn) = ca. 16–70 by 1H NMR] with unimodal molecular weight distributions (number‐average molecular weight = 8.30–36.3 × 103 by gel permeation chromatography, weight‐average molecular weight/number‐average molecular weight = 1.6–2.1) and with defined polymer chain ends (as a vinyl group, ? CH?CH2) was achieved when Ru(CHPh)(Cl)2(IMesH2)(PCy3) or Ru(CH‐2‐OiPr‐C6H4)(Cl)2(IMesH2) [IMesH2 = 1,3‐bis(2,4,6‐trimethylphenyl)‐2‐imidazolidinylidene] was employed as a catalyst at 50 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6166–6177, 2005 相似文献
10.
Kensuke Naka Adriana Gelover‐Santiago Takashi Uemura Yoshiki Chujo 《Journal of polymer science. Part A, Polymer chemistry》2003,41(5):708-715
Dithiafulvene oligomers ( 3 ) were prepared by cycloaddition polymerization of aldothioketenes with their alkynethiol tautomers derived from 1,4‐diethynylbenzene ( 2 ) with the addition of 1‐ethynyl‐4‐methylbenzene ( 1 ) as a monofunctionalized compound. Different feed ratios of 2 / 1 were used to control the molecular weights of 3 . The structures of 3 were confirmed by IR and 1H NMR spectroscopies in comparison with those of 2‐(4‐tolylidene)‐4‐tolyl‐1,3‐dithiol ( 4 ) as a model compound, which was obtained by the treatment of lithium 2‐tolylethynethiolate with water in Et2O. The number‐average degree of polymerization (DP) and the number‐average molecular weight were measured by gel permeation chromatographic and 1H NMR analysis. DP increased with an increasing feed ratio of 2 / 1 . The ultraviolet–visible spectra of 3 in diluted acetonitrile showed that the absorption maxima of 3 increased with an increasing DP of 3 . These redshifts are ascribed to an effective expansion of the π‐conjugation system in 3 . The oligomers exhibited a maximum conjugation length of seven repeating units. The redox properties of 3 were examined by cyclic voltammetry. The oxidation half‐peak potentials (Ep/2) of 3 were slightly cathodically shifted with increasing DP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 708–715, 2003 相似文献
11.
M. Jayakannan Paul A. van Hal Ren A. J. Janssen 《Journal of polymer science. Part A, Polymer chemistry》2002,40(2):251-261
We have synthesized three new donor–acceptor‐type monomers to achieve soluble and processable low‐band gap polymers, 4,7‐bis(4‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B4TB), 4,7‐bis(3‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B3TB), and 4‐(3‐octyl‐2‐thienyl)‐7‐(4‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B34TB), by the Suzuki coupling reaction. Using B4TB and B3TB, two soluble high molecular weight regioregular head‐to‐head and tail‐to‐tail polymers poly[4,7‐bis(4‐octyl‐2‐thienyl)‐2,1,3‐ benzothiadiazole] (PB4TB) and poly[4,7‐bis(3‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole] (PB3TB) were prepared via iron(III) chloride‐mediated oxidative polymerization. The structures of the polymers were confirmed by 1H and 13C NMR, and the molecular weights were determined by size exclusion chromatography. The optical properties (absorbance and fluorescence) of the monomers and polymers were studied and compared with unsubstituted analogues. The monomers and polymers bearing octyl substituents on the thiophene rings pointing away from the benzothiadiazole units (B4TB and PB4TB) possess a more planar structure, and their optical spectra appear redshifted as compared with those having the octyl chain nearer to the benzothiadiazole (B3TB and PB3TB). The optical band gaps of PB3BT (Eg = 2.01 eV) and PB4BT (Eg = 1.96 eV), however, are at much higher energy levels than that of the unsubstituted electrochemically polymerized PBTB material (Eg = 1.1–1.2 eV) as a result of steric effects of the octyl chains. The electrochemical properties of the monomers and polymers were examined using cyclic voltammetry and reflect the effect of alkyl substitution. B4TB and PB4TB were oxidized at a lower potential than B3TB and PB3TB, whereas their reduction potentials were less negative. The electrochemical band gap calculated from the onset of the reduction and oxidation process agreed with the optical band gap calculated from the absorption edges. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 251–261, 2002 相似文献
12.
Keiji Kanki Atsushi Nakazato Ryoji Nomura Fumio Sanda Toshio Masuda 《Journal of polymer science. Part A, Polymer chemistry》2004,42(9):2100-2105
A novel, water‐soluble Rh complex, (nbd)Rh[PPh2(m‐NaOSO2C6H4)] [C(Ph)?CPh2] ( 1 ) was synthesized by the reaction of [(nbd)RhCl]2, Ph2P(m‐NaOSO2C6H4) and Ph2C?C(Ph)Li, whose structure was determined by NMR and IR spectroscopies. The Rh catalyst 1 induced the polymerization of phenylacetylene (PA) in water to give two kinds of polymers; one was soluble in organic solvents such as tetrahydrofuran (THF) and CHCl3, and the other was insoluble in common organic solvents. The polymerization of sodium p‐ethynylbenzoate (p‐NaOCO‐PA) homogeneously proceeded with 1 in water at 60 °C to give the polymer in high yield. Poly(p‐NaOCO‐PA) was treated with 1 N HCl and then reacted with (CH3)3SiCHN2 to obtain poly(p‐MeOCO‐PA). The methyl‐esterified polymer was insoluble in THF and CHCl3, which suggests that the formed poly(p‐MeOCO‐PA) has cis–cisoidal structure. The polymer obtained from the polymerization of [p‐CH3(OCH2CH2)2O2CC6H4]C?CH with 1 in water was soluble in methanol, ethanol, and THF, and partly soluble in water. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2100–2105, 2004 相似文献
13.
Kensuke Naka Adriana Gelover‐Santiago Yoshiki Chujo 《Journal of polymer science. Part A, Polymer chemistry》2004,42(23):5872-5876
A π‐conjugated poly(dithiafulvene) ( 2 ) was obtained by the cycloaddition polymerization of aldothioketene with its alkynethiol tautomer derived from 1,4‐bis(1,2,3‐thiadiazolyl‐4‐yl)benzene ( 1 ) in a 94% yield. To a mixure of 1 and dimethyl sulfoxide (DMSO)/ethanol (5/1, v/v), KOH was added. After stirring the mixture overnight, piperidine was added to quench the terminal thioketenes. The reaction mixture was then poured into water to obtain the product. The cycloaddition polymerization of aldothioketene derived from 1 with its alkynethiol tautomer was studied under various conditions in several solvent systems. The structure of the polymer was supported by the 1H NMR and 13C NMR spectra. The number‐average degree of polymerization (DP) of 2 was 8, estimated from the 1H NMR analysis. Optical properties and electrochemical analysis of 2 were also studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5872–5876, 2004 相似文献
14.
Tomohisa Temma Shigeki Habaue 《Journal of polymer science. Part A, Polymer chemistry》2005,43(24):6287-6294
The asymmetric oxidative coupling polymerization of methyl 6,6′‐dihydroxy‐2,2′‐binaphthalene‐7‐carboxylate with the copper‐diamine catalysts under an O2 atmosphere was carried out. As is the case with the CuCl‐2,2′‐(S)‐isopropylidenbis(4‐phenyl‐2‐oxazoline) [(S)IPhO] catalyst, a polymer with a high cross‐coupling selectivity of 96% was obtained in 71% yield, whose THF‐soluble part had a number‐average molecular weight of 4.5 × 103. To estimate the enantioselectivity with respect to the cross‐coupling linkage in the obtained polymer, the model asymmetric oxidative cross‐coupling reaction with CuCl‐(S)IPhO was also conducted, and the products showed a 94% cross‐coupling selectivity and enantioselectivity of 31% ee (S). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6287–6294, 2005 相似文献
15.
J. Gonzalo Rodríguez Antonio Lafuente Javier Arranz 《Journal of polymer science. Part A, Polymer chemistry》2005,43(24):6438-6444
The synthesis and polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene was carried out with a homogeneous vanadium acetylacetonate/aluminum triethyl catalyst system, a bis(rhodium chloride cycloocta‐1,5‐diene) complex, and a palladium/trimethylsilyl complex. In all cases, the main fraction was a polymer with a stereoregular structure. The polymerization with the vanadium catalyst gave a polymer fraction in a low yield. The polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene with the soluble rhodium complex gave a polymer in a high yield. The soluble palladium/chlorotrimethylsilane complex gave a polymer in a good yield. On the basis of the spectroscopic data, the poly{(E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene)} obtained, in all cases, showed a cis–transoidal stereoregular structure. The molecular mass of poly{(E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene)} was determined by the matrix‐assisted laser desorption/ionization time‐of‐flight technique. The kinetics of the reaction were analyzed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6438–6444, 2005 相似文献
16.
Yutaka Nanashima Akihiro Yokoyama Tsutomu Yokozawa 《Journal of polymer science. Part A, Polymer chemistry》2012,50(6):1054-1061
A new regioregular head‐to‐tail (HT)‐type polypyridine with methoxyethoxyethoxy (MEEO) side chains, HT‐PMEEOPy, was synthesized by means of Kumada‐Tamao coupling polymerization of a Grignard monomer with a Ni catalyst. Although the polymer was precipitated in THF during polymerization, multiangle laser light scattering (MALLS) analysis indicated that the weight‐average molecular weight (Mw) was about 25,000. The HT content in the polymer was 95%. A solution of HT‐PMEEOPy in CHCl3 was found to emit a strong blue light when the solution was irradiated with UV light; the UV‐vis absorption maximum (λmax) and photoluminescence maximum (λmax em) were at 392 and 460 nm, respectively. To clarify the effect of regioregularity of PMEEOPy on the photoluminescence, head‐to‐head (HH) PMEEOPy was synthesized by means of Yamamoto coupling polymerization. The photoluminescence of HH‐PMEEOPy (λmax = 330 nm, λmax em = 414 nm) was weaker than that of HT‐PMEEOPy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
17.
Eunjae Jeong Sun Hee Kim In Hwan Jung Yangjun Xia Kwanghee Lee Hongsuk Suh Hong‐Ku Shim Han Young Woo 《Journal of polymer science. Part A, Polymer chemistry》2009,47(14):3467-3479
An indenofluorene‐based copolymer containing blue‐, green‐, and red light‐emitting moieties was synthesized by Suzuki polymerization and examined for application in white organic light‐emitting diodes (WOLEDs). Tetraoctylindenofluorene (IF), 2,1,3‐benzothiadiazole (BT), and 4,7‐bis(2‐thienyl)‐2,1,3‐benzothiadiazole (DBT) derivatives were used as the blue‐, green‐, and red‐light emitting structures, respectively. The number‐average molecular weight of the polymer was determined to be 25,900 g/mol with a polydispersity index of 2.02. The polymer was thermally stable (Td = ~398 °C) and quite soluble in common organic solvents, forming an optical‐quality film by spin casting. The EL characteristics were fine‐tuned from the single copolymer through incomplete fluorescence energy transfer by adjusting the composition of the red/green/blue units in the copolymer. The EL device using the indenofluorene‐based copolymer containing 0.01 mol % BT and 0.02 mol % DBT units ( PIF‐BT01‐DBT02 ) showed a maximum brightness of 4088 cd/m2 at 8 V and a maximum current efficiency of 0.36 cd/A with Commission Internationale de L'Eclairage (CIE) coordinates of (0.34, 0.32). The EL emission of PIF‐BT01‐DBT02 was stable with respect to changes in voltage. The color emitted was dependent on the thickness of the active polymer layer; layer (~60 nm) too thin was unsuitable for realizing WOLED via energy transfer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3467–3479, 2009 相似文献
18.
Kaoru Ohshimizu Ayumi Takahashi Tomoya Higashihara Mitsuru Ueda 《Journal of polymer science. Part A, Polymer chemistry》2011,49(12):2709-2714
Well‐defined poly(m‐phenylene) (PMP), which is poly(1,3‐dibutoxy‐m‐phenylene), was successfully synthesized via Grignard metathesis polymerization. PMP with a reasonably high number‐average molecular weight (Mn) of 25,900 and a very low polydispersity index of 1.07 was obtained. The polymerization of a Grignard reagent monomer, 1‐bromo‐2,4‐dibutoxy‐5‐chloromagnesiobenzene, proceeded in a chain‐growth manner, probably due to the meta‐substituted design producing a short distance between the MgCl and Br groups and thereby making a smooth nickel species (? C? Ni? C? ) transfer to the intramolecular chain end (? C? Ni? Br) over a benzene ring. PMP showed a good solubility in the common organic solvents, such as tetrahydrofuran, CH2Cl2, and CHCl3. Furthermore, a new block copolymer comprised of PMP and poly(3‐hexylthiophene) was also prepared. The tapping mode atomic force microscopy image of the surface of the block copolymer thin film on a mica substrate showed a nanofibril morphology with a clear contrast. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011. 相似文献
19.
Yang‐Liang Fan King‐Fu Lin 《Journal of polymer science. Part A, Polymer chemistry》2005,43(12):2520-2526
The presence of cis‐vinylene bonds in Gilch‐polymerized poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylene vinylene] is reported. Through fractionation, species with a weight‐average molecular weight of less than 37,000 exhibited an abnormal blueshift of photoluminescence spectra in toluene solutions, and this was attributed to the presence of cis‐vinylene bonds, as verified by NMR spectroscopy. Surprisingly, the fractionated species (~1 wt %) with a weight‐average molecular weight of 5000 were mostly linked by the cis‐vinylene bonds. The concentration decreased with the molecular weight until a molecular weight of 37,000 was reached; at that point, the polymer chains contained mainly trans‐vinylene bonds. Obviously, the formation of cis‐vinylene bonds strongly inhibited the growth of polymer chains during Gilch polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2520–2526, 2005 相似文献
20.
Makoto Yuasa Kenichi Oyaizu Aritomo Yamaguchi Masuhide Ishikawa Katsuya Eguchi Tomohiro Kobayashi Yuujiro Toyoda Satoshi Tsutsui 《先进技术聚合物》2005,16(8):616-621
Oxidative polymerization of bromoiron(III) meso‐tetrakis(3‐thienyl)porphyrin gave a novel polymeric porphyrin complex randomly crosslinked at the 2,5‐positions of the peripheral thienyl groups. The electrical semiconductivity of ca. 10?5 S/cm after I2 doping indicated that the polymer had a π‐conjugated structure with a moderate delocalization of π electrons over the thienylporphyrin units. PM3 calculations for free‐base models revealed that HOCO (the highest occupied crystal orbital) band width was reduced by introduction of the porphyrin moieties into the thienylene backbone and yet low HOCO‐LUCO (the lowest unoccupied crystal orbital) gap was maintained, which accounted for the relatively low electrical conductivity of the porphyrin polymer. The modified electrode prepared by electropolymerization was redox‐active due to the presence of iron(II/III) couple and the semiconductivity of the film, which served as a novel non‐enzymatic electrochemical sensor for superoxide anion radical based on the facile electrocatalytic oxidation of the superoxide. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献