High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Synthesis and properties of azobenzene‐containing poly(1‐alkyne)s with different functional pendant groups

1‐Alkynes containing azobenzene mesogenic moieties [HC?C(CH₂)₉? O? ph? N?N? ph? O? R; R = ethyl ( 1 ), octyl ( 2 ), decyl ( 3 ), (S)‐2‐methylbutyl ( 4 ), or (S)‐1‐ethoxy‐1‐oxopropan‐2‐yl ( 5 ); ph = 1,4‐phenyl] were synthesized and polymerized in the presence of a Rh catalyst {(nbd)Rh⁺[B(C₆H5)₄]^?; nbd = 2,5‐norbornadiene} to yield a series of liquid‐crystalline polymers in high yields (e.g., >75%). These polymers had moderate molecular weights (number‐average molecular weight ≥ 12,000), high cis contents in the main chain (up to 83%), good thermal stability, and good solubility in common organic solvents, such as tetrahydrofuran, chloroform, and dichloromethane. These polymers were thoroughly characterized by a combination of infrared, nuclear magnetic resonance, thermogravimetric analysis, differential scanning calorimetry, polarized optical microscopy, and two‐dimensional wide‐angle X‐ray diffraction techniques. The liquid‐crystalline behavior of these polymers was dependent on the tail group attached to the azobenzene structure. Poly‐ 1 , which had the shortest tail group, that is, an ethyl group, showed a smectic A mesophase, whereas poly‐ 2 , poly‐ 3 , and poly‐ 5 , which had longer or chiral tail groups, formed smectic C mesophases, and poly‐ 4 , which had another chiral group attached to the azobenzene structure, showed a chiral smectic C mesophase in both the heating and cooling processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4532–4545, 2006     

Side-chain liquid crystalline polymers with silphenylene-siloxane main chains. III. Synthesis and characterization of polymers with phenyl benzoate mesogenic groups

Side-chain liquid crystalline (SCLC) silphenylene-siloxane polymers with a phenyl benzoate mesogenic group and polymethylene spacers were prepared and characterized, and their properties were compared with those of equivalent SCLC polymers, SCLCPs, with a biphenyl mesogenic group. With identical spacers and terminal substituents, the melting temperatures of the former were much lower, but the isotropization temperatures were lowered to a lesser extent, than those of the latter, and, consequently, a more thermally stable nematic phase was obtained for the former. Both types of SCLCPs formed nematic phases, while polymethylsiloxanes with the same side-chain mesogens exhibited smectic phases with wider temperature ranges. The lower thermal stability of the mesophases in the silphenylene-siloxane SCLCPs compared to those of the SCLC polymethylsiloxanes can be attributed to both the rigidity of the backbone and the greater separation of the side-chains along the main chains of the former.     

All hydrocarbon main‐chain thermotropic liquid crystalline polymers,poly(1,1′‐biphenylene‐4,4′‐alkenediyl)s,prepared by the ADMET method and their hydrogenated polymers,poly(1,1′‐biphenylene‐4,4′‐alkanediyl)s

A series of poly(4,4′‐biphenylenealkenylene)s and copolymers were prepared by the acyclic diene metathesis (ADMET) polymerization of 4,4′‐bis(alkenylene)1,1′‐biphenyls. Unsaturated polymers thus prepared were then hydrogenated to produce the corresponding saturated polymers. All the polymers were found to be thermotropic and to form solidlike smectic phases in melt. Their liquid crystallinity (LC) was studied by differential scanning calorimetry (DSC), X‐ray diffractometry, and polarizing microscopy. We observed that one of the phenylene units of the biphenyl structure could selectively be hydrogenated at an elevated temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1335–1349, 2004     

The synthesis of a mesogenic poly(azine-ether) by polyetherification via cesium diphenoxides and α,ω-dibromoalkanes

The synthesis of a poly(azine–ether) via Williamson etherification using the cesium salt of 4–hydroxyacetophenone azine and 1,10–dibromodecane was carried out in N-methyl–2–pyrrolidone. The heterogeneous reaction proceeded readily at temperatures from ambient to 150°C. Polymers of varying molecular weight with essentially alkyl bromide end groups were produced either by changing the polymerization temperature or by using an excess of the organic substrate. The thermal stability of the polymers was molecular weight dependent and those with the highest DP_n exhibited monotropic nematic mesomorphism.     

Effect of smectogenicity of the ionic groups on the thermotropic liquid crystalline behavior of pyridinium and poly(4-vinylpyridinium) salts quaternized with mesogenic groups

In order to demonstrate the important smectic power of the ionic functions present in mesogenic molecules, a series of N-alkylpyridinium bromides ω-substituted with (4-cyanobiphenylyl)oxy or [4-(2-methyl-1-butoxy)biphenylyl]oxy mesogenic group and their analogous 4-vinylpyridinium polymers were synthesized and characterized. The liquid crystalline behavior was studied by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. Smectic mesophases, namely A, B, and E, were identified for the low molecular weight compounds, whereas smectic A and E mesophases were identified for the analogous polymers. Both structures were found to be very similar. They consist of single layers of upright molecules laterally arranged head-to-tail; the polymer backbone is inserted in between the layers. The monolayer smectic ordering observed in spite of the presence of the interacting cyano and chiral groups demonstrates the prevailing effect of the electrical interactions upon the structural organization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2569–2577, 1997     

Synthesis and crosslinking of vinyl‐terminated biphenyl and naphthalene liquid‐crystalline poly(epichlorohydrin) derivatives: Effect of nonmesogenic nonvinylic units on the mesogenic properties

Two series of vinyl‐terminated side‐chain liquid‐crystalline polyethers containing ethylene oxide or glycidyl aromatic carboxylates as spacers were synthesized. The mesogenic cores were 4,4′‐biphenyl or 2,6‐naphthalene moieties. The polymers were synthesized by chemically modifying poly(epichlorohydrin) or poly(epichlorohydrin)‐poly(ethylene oxide) with the corresponding mesogenic carboxylic acids or with mixtures of these acids and the nonmesogenic non‐crosslinkable analogous 4‐biphenyl‐ and 2‐naphthalenecarboxylic acids. In most cases the degree of modification achieved was higher than 90%. The polymers were characterized by chlorine analysis, IR, and ¹H and ¹³C NMR spectroscopies; viscosimetry; size exclusion chromatography; multi‐angle laser light scattering; and thermogravimetric analysis. The liquid‐crystal behavior, shown by most polymers, was examined by differential scanning calorimetry, polarized optical microscopy (POM), and X‐ray diffraction on mechanically oriented samples. The crosslinking of most polymers was done by peroxide‐type initiators that led to liquid‐crystal thermosets or elastomers. The freezing of the mesophase organization on the crosslinked materials was confirmed by POM and X‐ray diffraction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3893–3908, 2002     

Syntheses of multicyclic poly(ether sulfone)s from 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl spirobisindane and 4,4′‐bis(4‐chlorophenyl) sulfones

5,5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethyl spirobisindane (TTSBI) was polycondensed with 4,4′‐dichlorodiphenyl sulfone (DCDPS) or with 4,4′‐bis(4‐chlorophenyl sulfonyl) biphenyl (BCSBP) in DMSO. Concentration and feed ratio were optimized to avoid gelation and to obtain a maximum yield of multicyclic polyethers free of functional groups. Regardless of these reaction conditions, only low fractions of perfect multicycles were obtained from DCDPS apparently due to steric hindrance of ring closure. Under the same conditions high fractions of perfect multicycles were achieved with the longer and more flexible DCSBP. The reaction products were characterized by MALDI‐TOF mass spectrometry, ¹H‐NMR spectroscopy viscosity, and DSC measurements. Relatively low glass transition temperatures (T_gs ≈ 160–175 °C) were found. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3732–3739, 2008     

Synthesis and liquid crystalline properties of poly(1‐alkyne)s carrying triphenylene discogens

Triphenylene‐containing 1‐decynes with different alkyl chain lengths and their polymers are synthesized and the effects of the structural variables on their mesomorphic properties are investigated. The monomers [HC?C(CH₂)₈CO₂C₁₈H₆ (OC_mH_2m+1)₅; m = 4–9] are prepared by consecutive etherization, coupling, and esterification reactions. The monomers form columnar phases at room temperature. The polymerizations of the monomers are effected by [Rh(nbd)Cl]₂, producing soluble polymers in high yields (up to 84%). The structures and properties of the polymers are characterized and evaluated by IR, NMR, TGA, DSC, POM, and XRD analyses. All the polymers are thermally stable, losing little of their weights when heated to 300 °C. The isotropization temperature of the polymers increases initially with the length of alkyl chain but decreases on further extension. Although the polymers with shorter and longer alkyl chain lengths adopt a homogeneous hexagonal columnar structure, those with intermediate ones form mesophases with mixed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2960–2974, 2008     

Synthesis and crosslinking of biphenyl and naphthalene liquid‐crystalline polyethers with pendant full‐saturated and vinyl‐terminated aliphatic chains

Two series of vinyl‐terminated, side‐chain liquid‐crystalline polyethers containing 4,4′‐biphenyl and 2,6‐naphthalene moieties as mesogenic cores with several contents of vinyl crosslinkable groups were synthesized by chemically modifying poly(epichlorohydrin) with mixtures of saturated and vinyl‐terminated mesogenic acids. In most cases the degree of modification was over 90%. The polymers were characterized by chlorine analysis, IR and ¹H and ¹³C NMR spectroscopies, viscometry, size exclusion chromatography/multi‐angle laser light scattering, and thermogravimetric analysis. The liquid‐crystal behavior of all the synthesized polymers was examined by differential scanning calorimetry, polarized optical microscopy (POM), and X‐ray diffraction on mechanically oriented samples. The crosslinking of most polymers was done by peroxide‐type initiators, which generally led to liquid‐crystal elastomers. The mesophase organization was maintained on the crosslinked materials, as confirmed by POM and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3384–3399, 2003     

Luminescent mesogen jacketed poly(1‐alkyne) bearing lateral terphenyl with hexyloxy tail

Mesogen jacketed liquid crystalline poly(1‐alkyne) and poly(1‐phenyl‐1‐alkyne) linked pendants of terphenyl mesogens with hexyloxy tails at the waist position (? {RC?C? [(CH₂)₃OOC‐terpheyl‐(OC₆H₁₃)₂]}_n? , where R?H, PHATP(OC6)2 ; R?C₆H₅, PPATP(OC6)2 ) were synthesized. The influences of structural variations on the thermal, mesomorphic, and luminescent properties were investigated. Polymerizations of all monomers are carried out by WCl₆‐Ph₄Sn catalysts successfully. The polymers are stable (T_d ≥ 340 °C) and soluble in common solvents. The monomers and polymers show enantiotropic SmA phases in the heating and cooling processes, and the lateral side chains of the mesogenic units are perpendicular to the main chain. The “jacket effect” of chromophoric terphenyl core “shell” around the main chain also contributes to polymers with high photoluminescence, and the pendant‐to‐backbone energy transfer path is involved in the luminescence process of this polymers. In comparison with monosubstituted polyacetylene PHATP(OC6)2 , the disubstituted polyacetylene PPATP(OC6)2 shows better photoluminescence in both THF solution and film, and exhibited about 40 nm red‐shifted than PHATP(OC6)2 , indicating that the “jacket effect” of terphenyl mesogens forces poly(1‐phenyl‐1‐alkyne) backbone to extend in a more planar conformation with a better conjugation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A New Chemo‐Enzymatic Route to Side‐Chain Liquid‐Crystalline Polymers: The Synthesis and Polymerization of 6‐(4‐Methoxybiphenyl‐4′‐oxy)hexyl Vinyl Hexanedioate

A novel synthetic method combining chemo and enzymatic synthesis strategies was employed to prepare a vinyl acetate type monomer, 6‐(4‐methoxybiphenyl‐4′‐oxy)hexyl vinyl hexanedioate (VA‐LC). Homo‐ and copolymers of VA‐LC with maleic anhydride (MAn) were prepared by conventional free radical polymerization using 2,2′‐azobisisobutyronitrile (AIBN) and 1,1′‐azobis (cyclohexane carbonitrile) (AHCN) as an initiator at 95 and 60 °C, respectively. The thermal properties of the generated polymeric material were investigated by differential scanning calorimetry (DSC), and the optical texture was inspected by polarizing optical microscopy (POM). While the monomer VA‐LC does not exhibit liquid‐crystalline properties, poly(VA‐LC), and the alternating copolymer of VA‐LC with maleic anhydride both displayed such properties.

     

Effects of the alkyl side-chain length on the structures of poly[oxy(N-alkylsulfonylmethyl)ethylene]s

The structures of poly[oxy(N-alkylsulfonylmethyl)ethylene]s (ASE-Ns) were examined with X-ray, IR, DSC, and polarized optical microscopy. The structures of ASE-Ns were strongly dependent on the alkyl side-chain length. ASE-2 and ASE-3, the shortest ones, were amorphous materials. ASE-4 and ASE-5 showed nematic characteristics. ASE-6–ASE-12 had smectic A structures. ASE-14 and ASE-16 could be labeled as more ordered structures higher than smectic A (probably smectic B or smectic E). The d-spacings of the first small-angle reflections were double the most extended side-chain length and linearly increased with a slope of 2.50 Å per methylene unit, regardless of the structural phases. The maintenance of the double-layered structure in all ASE-Ns may be due to the strong dipole–dipole interactions at both sides of the layers against the main chain for all amorphous, nematic, and smectic phases of ASE-Ns. The double-layered structure was maintained above the isotropic temperature, indicating that dipole–dipole interactions were not destroyed although the alkyl side chains melted during the isotropic transition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1868–1874, 2004     

Synthesis and characterization of 4-cyanobiphenyl-4′-yloxy-functionalized poly(7-oxanorbornene-5,6-exo-dicarboximide)s via ring opening metathesis polymerization (ROMP)

N-[n-(4-cyanobiphenyl-4′-yloxy)alkyl]-7-oxanorbornene-5,6-exo-dicarboximide ( CBON ₂– CBON ₈) with increasing number of methylene groups in the alkyl part (n = 2–8) were synthesized by Mitsunobu condensation between the appropriate alcohols ( CBA ₂– CBA ₈) and 7-oxanorbornene-5,6-exo-dicarboximide ( ON ). The conditions for the ring opening metathesis polymerization of CBON _n giving acceptable molecular weights and molecular distributions were established. Characterization of the resulting polymers ( P ₂– P ₈) by ¹H- and ¹³C-NMR has shown a high trans content. Differential scanning calorimetry and optical microscopy analysis have shown that the alcohols CBA _n are thermotropic with some variations between the first and second heating-cooling cycles, the monomers CBON _n melt with no evidence of any mesomorphic state, the polymers P _n show only the glass transition, and the glass transition temperature (T_g) decreases with increases in the spacer length. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2807–2821, 1998     

Crosslinking of vinyl‐terminated biphenyl and naphthalene side‐chain liquid‐crystalline poly(epichlorohydrin) derivatives

We performed the crosslinking of vinyl‐terminated biphenyl and naphthalene side‐chain liquid‐crystalline polyethers using peroxide‐type initiators with and without the addition of tertiary amine promoters. The crosslinking temperatures were chosen in the range of mesophase stability to allow the mesophase order to be frozen. The biphenyl derivatives, with a high isotropization temperature, were crosslinked to a large extent. This led to anisotropic thermosets. To crosslink naphthalene derivatives, amine promoters were needed, but degrees of crosslinking were lower, and anisotropic elastomers were obtained. Crosslinking processes were studied by differential scanning calorimetry, polarized optical microscopy, and Fourier transform infrared spectroscopy. The nature of the frozen mesophase was confirmed by X‐ray diffraction studies on mechanically oriented samples. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2237–2244, 2002     

Side chain length affects backbone dynamics in poly(3‐alkylthiophene)s

Charge transport in conjugated polymers may be governed not only by the static microstructure but also fluctuations of backbone segments. Using molecular dynamics simulations, we predict the role of side chains in the backbone dynamics for regiorandom poly(3‐alkylthiophene‐2,5‐diyl)s (P3ATs). We show that the backbone of poly(3‐dodecylthiophene‐2‐5‐diyl) (P3DDT) moves faster than that of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) as a result of the faster motion of the longer side chains. To verify our predictions, we investigated the structures and dynamics of regiorandom P3ATs with neutron scattering and solid state NMR. Measurements of spin‐lattice relaxations (T₁) using NMR support our prediction of faster motion for side chain atoms that are farther away from the backbone. Using small‐angle neutron scattering (SANS), we confirmed that regiorandom P3ATs are amorphous at about 300 K, although microphase separation between the side chains and backbones is apparent. Furthermore, quasi‐elastic neutron scattering (QENS) reveals that thiophene backbone motion is enhanced as the side chain length increases from hexyl to dodecyl. The faster motion of longer side chains leads to faster backbone dynamics, which in turn may affect charge transport for conjugated polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1193–1202     

Chemical modification of poly(acrylonitrile) with amines

The chemical modification of poly(acrylonitrile) was carried out using monoethanolamine and 1,2-ethylenediamine. The effect of the reaction conditions on the content of basic groups was studied. Polymer analogous reactions were carried out by varying the amount of the starting reagents and the temperature. The amino-containing polymers were characterized by elemental analysis. The obtained water-soluble polymers were used as carriers of low-molecular substances. © 1996 John Wiley & Sons, Inc.     

Dielectric study of the phase diagram of the poly(γ‐benzyl‐L‐glutamate)/dimethylformamide system

The phase diagram for solutions of poly(γ‐benzyl‐L ‐glutamate) in dimethylformamide has been investigated over the entire composition and temperature ranges with dielectric spectroscopy. The dielectric response in this system is dominated by ionic mobility, and phase transitions have been detected as changes in the ionic conductivity. The phase boundaries, determined by dielectric spectroscopy, are consistent with earlier published results obtained by a combination of optical microscopy observations and nuclear magnetic resonance and differential scanning calorimetry studies. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3943–3952, 2004     

Studies on the synthesis and properties of thermotropic liquid crystalline polycarbonates. VII. Liquid crystalline polycarbonates and poly(ester‐carbonate)s derived from various mesogenic groups

Three series of thermotropic liquid crystalline polycarbonates and poly(ester‐carbonate)s were prepared by solution polycondensation of 4,4′‐biphenyldiol (BP), 4′‐hydroxybiphenyl‐4‐hydroxybenzoate (HHB), or 4‐hydroxyphenyl‐4″‐hydroxybiphenyl‐4′‐carboxylate (HHBP), as mesogenic unit, with 1,10‐bis(p‐hydroxybiphenoxy)decane (N10), bisphenol A (BPA), 4,4′‐dihydroxy‐diphenyl ether (BPO), 4,4′‐[phenylbis(oxy)]bisphenol (BPOO), methylhydroquinone (MeHQ), or phenylhydroquinone (PhHQ). One series of cholesteric poly(ester‐carbonate)s were also prepared by using HHBP, the aromatic diols mentioned above and isosorbide as the chiral moiety. All polycondensations were implemented in pyridine by using triphosgene as the condensation agent. The synthesized polycarbonates were characterized by viscometer, FTIR, DSC, TGA measurements, polarizing microscopy equipped with a heating stage, and WAXD powder pattern. In this study, it was found that the liquid crystalline properties of polycarbonates strongly rely on the mesogenic unit applied. HHBP‐series exhibits a wide temperature region of liquid crystalline (LC) phase even with 50% of bisphenol A (BPA), which is a V‐shaped structure and usually destroys liquid crystalline properties. In addition, homopolycarbonate with HHBP structure possesses extraordinarily low phase‐transition temperature and wide liquid crystalline phase range, due to its asymmetric structure. This asymmetric structure results in head‐to‐tail, head‐to‐head, and tail‐to‐tail random conformation of polymer chain. The isosorbide containing poly(ester‐carbonate)s formed cholesteric phase, which showed homogeneous blue, green, or red Grandjean texture upon shearing in molten state and the Grandjean texture could be frozen easily while quenching the sample to the room temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1852–1860, 2000     

Kinetics and steric limitation of quaternization of poly(4-vinylpyridine) with mesogenic ω-(4′-methoxy-4-biphenylyloxy)alkyl bromides

The kinetics and characteristics of the quaternization of poly(4-vinylpyridine) with very large alkylating agents are studied with the main aim to demonstrate the occurrence of a limitation of the reaction due to steric effect. Kinetics are carried out in sulfolane at different temperatures with two ω-(4'-methoxy-4-biphenylyloxy)alkyl bromides. An important limitation of the reaction is demonstrated: 30% of the pyridine groups are inaccessible at 333 K, 23% at 355.5 K, and 4% at 363 K. Post-quaternization experiments with butyl bromide of already partially quaternized P4VP also demonstrate this limitation. The occurrence of global steric hindrance and hydrophobic effects affecting the conformation of the chain in solution is proposed to explain the limited accessibility of the pyridine groups. The results question the classical neighboring group model generally used to describe the slowing down of the quaternization reaction with increasing quaternization ratio. The thermal stability of the quaternized polymers and the colors of the reaction medium are also discussed. © 1992 John Wiley & Sons, Inc.