Synthesis of a novel liquid crystal rod–coil star block copolymer consisting of poly(methyl methacrylate) and poly{2,5‐bis[(4‐methoxy‐phenyl)oxycarbonyl] styrene} via atom transfer radical polymerization

A bromine capped star‐shaped poly(methyl methacrylate) (S‐PMMA‐Br) was synthesized with CuBr/sparteine/PT‐Br as a catalyst and initiator to polymerize methyl methacrylate (MMA) according to atom transfer radical polymerization (ATRP). Then, with S‐PMMA‐Br as a macroinitiator, a series of new liquid crystal rod–coil star block copolymers with different molecular weights and low polydispersity were obtained by this method. The block architecture {coil‐conformation of the MMA segment and rigid‐rod conformation of 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl] styrene segment} of the four‐armed rod–coil star block copolymers were characterized by ¹H NMR. The liquid‐crystalline behavior of these copolymers was studied by differential scanning calorimetry and polarized optical microscopy. We found that the liquid‐crystalline behavior depends on the molecular weight of the rigid segment; only the four‐armed rod–coil star block copolymers with each arm's M_n,_GPC of the rigid block beyond 0.91 × 10⁴ g/mol could form liquid‐crystalline phases above the glass‐transition temperature of the rigid block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 733–741, 2005     

Metastable liquid–liquid and solid–liquid phase boundaries in polymer–solvent–nonsolvent systems

In general liquid–liquid demixing processes are responsible for the porous morphology of membranes obtained by immersion precipitation. For rapidly crystallizing polymers, solid–liquid demixing processes also generate porous morphologies. In this study, the interference of both phase transitions has been analyzed theoretically using the Flory–Huggins theory for ternary polymer solutions. It is demonstrated that four main thermodynamic and kinetic parameters are important for the structure formation in solution: the thermodynamic driving force for crystallization, the ratio of the molar volumes of the solvent and the nonsolvent, the polymer–solvent interaction parameter, and the rate of crystallization of the polymer compared to the rate of solvent-nonsolvent exchange. An analysis of the relevance of each of these parameters for the membrane morphology is presented. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 763–770, 1997     

Oligo(p‐phenyleneethynylene)‐based coil–rod–coil triblock copolymer: Synthesis and controlled self‐organization in solution

The self‐assembling ability of block copolymers offers an attractive strategy for the organization of π‐conjugated polymers. This article reports the synthesis of a coil–rod–coil triblock copolymer consisting of oligo(p‐phenyleneethynylene) as the rodlike segment and polystyrene as the coil‐like segment. The chemical structure of the afforded triblock copolymer has been fully characterized by various spectroscopic techniques such as NMR, Raman, gel permeation chromatography, differential scanning calorimetry, ultraviolet–visible, and fluorescence spectroscopy. The small‐angle neutron scattering and photophysical measurements indicate that this triblock copolymer exhibits unique solvatochromatic behaviors through the interplay of aggregation‐induced π–π stacking and planarization of the conjugated backbone. Supramolecular gel nanostructures have been produced via the controlled assembly of the polymer into H‐aggregates. It has been demonstrated that the use of the solvent composition to influence chain conformations and thus to manipulate the packing of the conjugated polymer blocks is important for achieving control in the assembly of conducting polymers and associated optical characteristics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6007–6019, 2005     

Hydrophobic and hydrophilic aggregation of tailor‐made urethane acrylate anionomers in various solvents and their network structures

Tailor‐made urethane acrylate anionomer (UAA) chains show higher viscosity and polyelectrolyte behavior in dimethyl sulfoxide (DMSO) than in water and toluene. Water is a nonsolvent for the hydrophobic soft segment but a good solvent for the hydrophilic hard segments, so hydrophobic segments are aggregated and form particles in the water phase, resulting in a smaller viscosity. Also, the fact that the viscosity of UAA chains is lowest in toluene can be interpreted as a result of ionic aggregation due to the nonpolarity of toluene. The structures of UAA networks dramatically change with the nature of the solvents used (i.e., the interaction between the UAA chains and the solvents used changes); this is confirmed by the results of tensile property, morphology, and wide‐angle X‐ray scattering data. Ionic aggregation formed in UAA/toluene (UATG networks) and hydrophobic aggregation formed in UAA/water (UAAG networks) are locked in by a chemical crosslinking reaction and result in a greater modulus and X‐ray scattering intensity. The greater elongation and swelling ratio in methylene chloride of UATG networks prepared in a UAA/toluene solution indicates that toluene is a better solvent than DMSO for the hydrophobic segments of UAA chains. Also, the greater swelling ratio in a pH 11 buffer solution and greater modulus of UAAG networks show that water is a better solvent than DMSO for hydrophilic ionic segments. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1903–1916, 2000     

LCST‐type liquid–liquid and liquid–solid phase transition behaviors of hyperbranched polyglycerol bearing imidazolium salt

A hyperbranched polyglycerol bearing imidazolium tosylate units ( ITHB ) was synthesized through the imidazolium salt‐modification of hyperbranched polyglycerol ( HB ). ITHB was found to possess novel reversible lower critical solution temperature (LCST)‐type liquid–liquid and liquid–solid phase transition behaviors in a methanol/chloroform mixed solution. The phase transition temperatures of the liquid–liquid phase transition (PTT_1to2) and liquid–solid phase transition (PTT_2toSus) increased with increasing the ratio of methanol in the mixed solution and decreasing the concentration of ITHB . Additionally, increasing the molecular weight of ITHB decreased the PTT values. The liquid–liquid phase transition was caused by the aggregation of ITHB , which was proved by dynamic light scattering measurement. In contrast, the liquid–solid phase transition was caused by the solvation cleavage between the imidazolium rings and solvents, which was proved by ¹H NMR measurement. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Micro ATR‐FTIR study of the hydration state of poly(N‐tert‐butylacrylamide‐co‐acrylamide) copolymers during phase transition in aqueous media and in the mixture of water–methanol

Coil‐globule transition of poly(N‐tert‐butylacrylamide‐co‐acrylamide) P(NTBAM‐co‐AM) copolymers is investigated in the aqueous solution and in the mixture of water–methanol by micro ATR‐FTIR spectroscopy technique. In this study the microstructure and its changes in the hydration states of the distinct groups of these copolymers are investigated by micro ATR/FTIR technique. The results showed that by heating the solution above the LCST hydrogen bonding between C?O and water was decreased but the hydrogen bonding between polymeric chains increased, which prove the aggregation of polymer chain during phase separation. The chemical shifts of IR bands are also studied in the mixture of water–methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 356–363, 2010     

Effect of soft segment component on moisture‐permeable polyurethane films

The effect of soft segment component and molecular weight combination on moisture‐permeable polyurethane films was studied. Moreover, water sorption phenomenon in films was observed with infrared analysis. As for soft segment components, PTMG/PEG and PTMG/PPG were used and molecular weight combinations were changed. Different tendency appeared in the experimental results corresponding to PEG system and PPG system. Moisture permeability P in PEG system increased with increasing PEG content, but P changed little in the case of PPG system. Both hydrogen‐bonded concentration by infrared measurement and the higher order term Δh of Mooney–Rivlin plot by stress–strain relationships indicate the existence of aggregate structure of hard segment. It is considered that ether group in PEG is more active than that in PPG. Therefore, small size of aggregate structure indicated as Δh appears in PEG system owing to inhibition of aggregate structure growth. Whereas, ether group in PPG system does not inhibit hydrogen bond in urethane group and large size of aggregate structure appears. From water affinity relationship analysis, hydrophilicity of samples with PTMG/PEG = 2000/2000 increased with increasing PEG content. Consequently, it is suggested that not only size but also hydrogen‐bonded concentration of urethane group in aggregate structure affects moisture permeability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 573–583, 2006     

Temperature‐sensitive hydrogel microspheres formed by liquid–liquid phase transitions of aqueous solutions of poly(N,N‐dimethylacrylamide‐co‐allyl methacrylate)

Poly(N,N‐dimethylacrylamide‐co‐allyl methacrylate) (DMA‐co‐AMA) copolymers were prepared by the copolymerization of N,N‐dimethylacrylamide with allyl methacrylate (AMA). The methacryloyl group of AMA reacted preferentially, and this resulted in pendant allyl groups along the copolymer chains. Aqueous solutions of these DMA‐co‐AMA copolymers were thermoresponsive and showed liquid–liquid phase transitions at temperatures that depended on the AMA content. Hydrogel microspheres were prepared from these thermally phase‐separated liquid microdroplets by the free‐radical crosslinking of the pendant allyl groups. The morphologies of the resulting thermoresponsive microspheres as a function of the reaction temperature and the amount of the initiator were examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1641–1648, 2005     

“One‐pot” synthesis of aromatic poly(1,3,4‐oxadiazole)s in novel solvents—ionic liquids

The new convenient method for the synthesis of high molecular weight aromatic poly(1,3,4‐oxadiazole)s (PODs) has been proposed. These polymers were prepared by “one‐pot” procedure from dicarboxylic acid and hydrazine's salt (sulfate, phosphate) or dicarboxylic acid dihydrazides. The mixture of ionic liquid and triphenyl phosphite was used both as a solvent and condensing agent. The polycyclization occurred at a sufficiently low temperature of 210 °C for 2–5 h and resulted in obtaining film‐forming PODs having inherent viscosities up to 0.9 dL/g and good thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 380–394, 2006     

Effects of formulation variables on liquid‐crystal droplet size distributions in ultraviolet‐cured polymer‐dispersed liquid‐crystal cells

The size distributions of liquid‐crystal droplets in ultraviolet‐cured polymer‐dispersed liquid‐crystal cells have been studied with optical microscopy. It has been observed that (1) the relative masses of the liquid crystal and crosslinking agent determine the droplet size distribution for submicrometer droplet diameters and (2) only the liquid‐crystal mass fraction affects the droplet size distribution for diameters ranging from 1 to 4 μm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1842–1848, 2005     

Solution processing of polymer semiconductor: Insulator blends—Tailored optical properties through liquid–liquid phase separation control

It has been demonstrated that the 0‐0 absorption transition of poly(3‐hexylthiophene) (P3HT) in blends with poly(ethylene oxide) (PEO) could be rationally tuned through the control of the liquid–liquid phase separation process during solution deposition. Pronounced J‐like aggregation behavior, characteristic for systems of a low exciton band width, was found for blends where the most pronounced liquid–liquid phase separation occurred in solution, leading to domains of P3HT and PEO of high phase purity. Since liquid–liquid phase separation could be readily manipulated either by the solution temperature, solute concentration, or deposition temperature, to name a few parameters, our findings promise the design from the out‐set of semiconductor:insulator architectures of pre‐defined properties by manipulation of the interaction parameter between the solutes as well as the respective solute:solvent system using classical polymer science principles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 304–310     

Nanocomposites of vinyl chloride–acrylonitrile copolymer and silica

Vinyl chloride–acrylonitrile (VC–AN) copolymer was synthesized through emulsion copolymerization. VC–AN copolymer/silica nanocomposites were prepared by solution blending of copolymer and silica in a common solvent, N,N‐dimethylformamide (DMF). The rheology studies show that the shear‐thinning behavior of the VC–AN copolymer solution becomes less distinct as nano particles are introduced. It was also found that the viscosity of the copolymer solution decreases with adding small amount of nano particles. Transmission electron microscopy observations indicate that the UV‐treated silica could disperse well in the copolymer matrix. Differential scanning calorimeter studies suggest that the presence of the silica suppresses crystallization of the AN segments in the copolymers. Because of the interactions between copolymer chains and inorganic particles, the thermal stability and mechanical strength of the VC–AN copolymers are improved considerably. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3127–3134, 2005     

Melt‐flow‐induced phase morphologies of a high‐density polyethylene/poly(ethylene‐co‐1‐octene) blend

A blend of high‐density polyethylene and an elastomeric poly(ethylene‐co‐1‐octene) resin, containing 25 mol % octene and long‐chain branching, was phase‐separated in the melt under quiescent conditions. After melt flow, the blend had fine globular or interconnected phase morphologies that were interpreted as originating from the various stages of coarsening after liquid–liquid phase separation through spinodal decomposition. It was inferred that the miscibility of the blend was enhanced under melt flow. After cessation of flow, concurrent liquid–liquid and solid–liquid phase separation took place, resulting in the formation of an interpenetrating morphology comprising amorphous polyethylene, copolymer, and crystalline polyethylene. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 380–389, 2001     

Prediction and phase segregation in thin‐film of conjugated polymer blends

Blending conjugated polymers is an efficient method to improve the properties of the films. The phase diagram of poly(9,9‐dihexylfluorene) (PF) and poly(2‐methoxy‐5‐(2′‐ethyl‐hexyloxyl)‐p‐phenylene vinylene) (MEHPPV) was predicted by a modified Flory–Huggins theory based on the topological method (graph theory) for the structure‐property correlations. It shows that the two polymers have a strong trend to separate. Atomic/friction force microscopy (AFM/FFM) measurements show there exist microphase separations in film prepared at room temperature. After annealing at 160 °C, serious phase segregations took place in both the lateral and vertical direction. The photoluminescence of the thin films was also measured by a fluorophotometer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1382–1391, 2005     

Poly(styrene–b–ethylene/butylene–b–styrene)/cobalt ferrite magnetic nanocomposites

Magnetic nanoparticles were created in or around the sulfonated (s) polystyrene domains in a poly[styrene–b–(ethylene–co–butylene)–b–styrene)] block copolymer (BCP) using an in situ inorganic precipitation procedure. The sBCP was neutralized with a mixed iron/cobalt chloride electrolyte, and the doped samples were converted to their oxides by reaction with sodium hydroxide. Transmission electron microscopy indicated the presence of nanoparticles having diameters of 20–50 nm. Metal oxide particle structures were studied using wide angle X–ray diffraction, which revealed that they were inverse spinel cobalt iron oxide crystals. Thermogravimetric analysis provided the weight percent of the inorganic component and nanocomposite thermal decomposition profile. Modulated differential scanning calorimetry studies suggested that the inorganic inclusions were selectively grown in the polystyrene hard block phase. These nanocomposites were shown, using alternating gradient magnetometry, to be ferrimagnetic at room temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1475–1485, 2005     

Synthesis of new photoresponsive polyesters containing norbornadiene moieties by the ring‐opening copolymerization of donor–acceptor norbornadiene dicarboxylic acid anhydride with donor–acceptor norbornadiene dicarboxylic acid monoglycidyl ester derivatives

The ring‐opening copolymerization of donor–acceptor norbornadiene (D–A NBD) dicarboxylic acid monoglycidyl ester derivatives with D–A NBD dicarboxylic acid anhydride was performed with tetraphenylphosphonium bromide as a catalyst in toluene to produce new norbornadiene (NBD) polyesters containing D–A NBD moieties in the main chain and in the side chain in one step in good yields. The photoisomerization of the D–A NBD moieties in these polyesters proceeded very smoothly to give the corresponding quadricyclane groups. Because these NBD polyesters contained many NBD moieties in the polymer chain, they had the highest capacity for heat storage in the D–A NBD polymers reported so far. The stored thermal energy of the irradiated polyesters was evaluated by differential scanning calorimetry analysis to be approximately 150–190 J/g. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4412–4421, 2005     

Phase behavior study of poly(N‐tertbutylacrylamide‐co‐acrylamide) in the mixture of water–methanol: The role of polymer–nonsolvent second‐order interactions

The phase behavior of poly(N‐tertbutylacrylamide‐co‐acrylamide) (PNTBAM) in pure water and mixture of water–methanol is studied at different temperatures. The different compositions of PNTBAM are prepared by free‐radical polymerization technique and their phase behavior is studied by turbidimetry. The effects of copolymer and solvent composition on the phase behavior of the copolymers are discussed. It has been suggested that the inhomogenities in polymer chains are responsible for lowering the rate of phase transition by increasing the N‐tertbutylacrylamide (NTBAM) and methanol contents in copolymer and mixture, respectively. For the first time we have revealed that there are second‐order binary interactions in the water–methanol which are dominant in the special range of copolymer composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 455–462, 2009     

Poly(silarylene–siloxane)polyimides from allyl‐terminated oligoimides and hydride‐functional silarylene–siloxanes via hydrosilylation polymerization

This research was focused on the design and execution of new synthetic routes to low‐temperature‐curable poly(silarylene–siloxane)polyimides. The synthesis of individual oligoimide and silarylene–siloxane blocks was followed by hydrosilylation polymerization to produce crosslinked copolymers. The silarylene–siloxane and polyimide blocks were structurally characterized by IR and ¹H NMR spectroscopy and size exclusion chromatography. The high‐temperature resistance of the copolymers was evaluated through the measurement of heat distortion temperatures (T_HD's) via thermomechanical analysis and by the determination of the weight loss at elevated temperatures via thermogravimetric analysis. Glass‐transition temperatures (T_g's) of the silarylene–siloxane segments were measured by differential scanning calorimetry. Hydrosilylation curing was conducted at 60 °C in the presence of chloroplatinic acid (H₂PtCl₆). The copolymers displayed both high‐temperature resistance and low‐temperature flexibility. We observed T_g of the silarylene–siloxane segment as low as ?77 °C and T_HD of the polyimide segment as high as 323 °C. The influence of various oligoimide molecular weights on the properties of copolymers containing the same silarylene–siloxane was examined. The effect of various silarylene–siloxane molecular weights on the properties of copolymers containing the same oligoimide was also examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4922–4932, 2005     

Synthesis and characterization of thermally stable sulfonated polybenzimidazoles obtained from 3,3′‐disulfonyl‐4,4′‐dicarboxyldiphenylsulfone

A novel sulfonated aromatic diacid, 3,3′‐disulfonyl‐4,4′‐dicarboxyldiphenylsulfone (DSDCDPS), was successfully synthesized from 4,4′‐dimethyldiphenylsulfone by sulfonation and further oxidation. A series of sulfonated polybenzimidazoles (sPBI‐SS) with various sulfonation degrees was prepared from DSDCDPS, 4,4′‐sulfonyldibenzoic acid and 3,3′‐diaminobenzidine by solution copolycondensation in poly(phosphoric acid). The chemical structure of the resulting sPBI‐SS was confirmed by FTIR and ¹H NMR. The DSDCDPS‐based sPBI‐SS with the number‐average molecular weights of 32,000–55,000 were easy to dissolve in polar aprotic solvents such as DMF, DMSO, and DMAc, and could be cast into transparent, tough, and flexible membranes. The membranes presented good thermal stabilities (5% weight loss temperatures higher than 430 °C), and the thermal degradation activation energies of the sulfonic group of sPBI‐SS40 evaluated under N₂ by both Ozawa and Kissinger methods were 266.06 and 264.79 kJ/mol, respectively. The membranes also exhibited high storage moduli, glass transition temperatures (above 238 °C) and tensile strengths (～80 MPa), in addition to water uptakes (22.3–25.2%) and low swelling degrees (<14.0%). © 2005 Wiley Periodicals, Inc. J Polym Sci A: Polym Chem 43: 4363–4372, 2005