Preparation and thermomechanical properties of epoxy resins modified by octafunctional cubic silsesquioxane epoxides

The thermomechanical properties of octafunctional cubic silsesquioxane‐modified epoxy resins associated with dicycloaliphatic hardener (4,4′‐dimethyldiaminodicyclo hexyl methane) were studied using thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. The structures of epoxy resin containing cubic silsesquioxane epoxides were characterized by Fourier transform infrared spectroscopy and wide‐angle X‐ray scattering techniques. In this work, octa(dimethylsiloxybutylepoxide) octasilsesquioxane (OB), and octa(glycidyldimethyl‐siloxyepoxide) octasilsesquioxane (OG), were synthesized and used as additives to improve the properties of a commercial epoxy resin by exploring the effects of varying the ratio of OB or OG. The commercial Ciba epoxy resin (Araldite LY5210/HY2954) was used as a standard. It was found, by thermogravimetric analysis and dynamic mechanical analysis, that the highest thermal stability was observed at N = 0.5 (N = number of amine groups/number of epoxy rings). No glass transition temperature was observed by adding 20 mol % OB to the Ciba epoxy resin, indicating the reduction of chain motion in the presence of octafunctional cubic silsesquioxane epoxide. The storage modulus of the OB‐modified epoxy resin also increased, especially at higher temperatures, compared with the Ciba epoxy resin under identical curing conditions. Fourier transform infrared data elucidated the preservation of cubic silsesquioxane structure after curing at high temperature. In contrast, the OG/Araldite LY5210/HY2954 systems gave poorer thermomechanical properties. The low viscosity of OB at room temperature (～ 350 cPs) makes it suitable for composite processing and, when used in conjunction with the Ciba epoxy, lowers the viscosity of this system as well. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3490–3503, 2004     

Synthesis and characterization of organic/inorganic hybrid star polymers of 2,2,3,4,4,4‐hexafluorobutyl methacrylate and octa(aminophenyl)silsesquioxane nano‐cage made via atom transfer radical polymerization

Well‐defined organic/inorganic hybrid fluorinated star polymers were synthesized via atom transfer radical polymerization (ATRP) of 2,2,3,4,4,4‐hexafluorobutyl methacrylate (HFBMA) using octa(aminophenyl)silsesquioxane (OAPS) nano‐cage as initiator. For this purpose, OAPS was transformed into ATRP initiator by reacting with 2‐bromoisobutyrylbromide. ATR polymerization of HFBMA was carried out in trifluorotoluene at 75 °C using CuCl/2,2‐bipyridine or N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst system. GPC and ¹H NMR data confirmed the synthesis of OAPS/PHFBMA hybrid star polymer. Kinetics of the ATR polymerization of HFBMA using OAPS nano‐cage initiator was also investigated. The OAPS/PHFBMA hybrid stars were found to be molecularly dispersed in solution (THF); however, TEM micrographs revealed the formation of spherical particles of ～ 120–180 nm by the OAPS/PHFBMA hybrid star polymer after solvent evaporation. Thermal characterization of the nanocomposites by differential scanning calorimetry (DSC) revealed a slightly higher glass transition temperature (T_g) (when compared with the linear PHFBMA) of higher molecular weight OAPS/PHFBMA hybrid star polymers. In contrast, lower T_g than the linear PHFBMA was observed for OAPS/PHFBMA of relatively lower molecular weight (but higher than the linear PHFBMA). Thermal gravimetric analysis (TGA) showed a significant retardation (by ～60 °C) in thermal decomposition of nanocomposites when compared with the linear PHFBMA. Additionally, surface properties were evaluated by measuring the contact angles of water on polymer surfaces. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7287–7298, 2008     

Properties of well‐defined alternating and random copolymers of methacrylates and styrene prepared by controlled/living radical polymerization

The physical properties of well‐defined alternating copolymers poly(methyl methacrylate‐alt‐styrene) and poly(n‐butyl methacrylate‐alt‐styrene), prepared by reversible addition–fragmentation chain transfer polymerization in the presence of Lewis acids, were investigated with differential scanning calorimetry, wide‐angle X‐ray scattering, and dynamic mechanical measurements. The properties were compared with those of random copolymers of the same overall composition and the corresponding homopolymers. Wide‐angle X‐ray scattering data showed that the alternating copolymers possessed a more regular comonomer sequence than the random copolymers. The thermomechanical properties of alternating copolymers and random copolymers were quite similar and typical for amorphous polymers, but in one of the cases studied the glass‐transition temperature for alternating copolymer was remarkably higher than for the random copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3440–3446, 2005     

Effect of incorporated CdS nanoparticles on the crystallinity and morphology of poly(styrene‐b‐ethylene oxide) diblock copolymers

Surface‐modified CdS nanoparticles selectively dispersed in hexagonally packed poly(ethylene oxide) (PEO) cylinders of poly(styrene‐b‐ethylene oxide) (PSEO) block copolymers were prepared. The photoluminescence and ultraviolet–visible characteristics of the presynthesized CdS nanoparticles in N,N‐dimethylformamide and in PEO domains of the PSEO block copolymers were determined. Because of strong interactions between the CdS nanoparticles and PEO chains, as shown by Fourier transform infrared spectroscopy, the incorporation of the CdS nanoparticles prevented the PEO cylinders from properly crystallizing; this was confirmed by differential scanning calorimetry and wide‐angle X‐ray diffraction measurements. The intercylinder distance between the swollen and reduced‐crystallinity CdS/PEO cylinders in turn increased, as confirmed by small‐angle X‐ray scattering and transmission electron microscopy. At a high CdS concentration (43 wt % or 8.3 vol % with respect to PEO), however, the hexagonally packed cylindrical nanostructure of the PSEO diblock copolymers was destroyed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1220–1229, 2005     

Thermal and Morphological Properties of Octa(maleimido phenyl) Silsesquioxane (OMPS)-Reinforced Polybenzoxazine Hybrid Nanocomposites

We prepared an octa maleimido functionalized POSS, namely octa(maleimido phenyl) silsesquioxane (OMPS)-reinforced polybenzoxazine hybrid nanocomposites, by using four different types of benzoxazines (BZ-Cy-DDM, BZ-Cy-DDE, BZ-Cy-DDS, and BZ-Cy-Ani). They were synthesized from 1,1-bis(3-methyl-4-hydroxyphenyl) cyclohexane, paraformaldehyde, and aromatic amines (4,4′-diaminodiphenylmethane, 4,4′-diaminodiphenylether, 4,4′-diaminodiphenylsulphone, and aniline) by the Mannich reaction. We used 10 wt.% OMPS in all four polybenzoxazine matrices in order to compare the effect of OMPS on various benzoxazines. They were polymerized through thermal ring-opening polymerization at identical conditions. The thermal properties of the resulting OMPS-reinforced polybenzoxazine hybrid nanocomposites were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The dispersion of OMPS in the polybenzoxazine and nanostructure of the composites were confirmed by X-ray diffraction analysis, transmission electron microscopy, and atomic force microscopy.     

Octafunctional cubic silsesquioxane (CSSQ)/poly(methyl methacrylate) nanocomposites: Synthesis by atom transfer radical polymerization at mild conditions and the influence of CSSQ on nanocomposites

Organic/inorganic hybrid star‐like nanocomposites from two different octafunctional cubic silsesquioxane (CSSQ) nano‐cage cores and poly(methyl methacrylate) (PMMA) were synthesized using atom transfer radical polymerization (ATRP) at mild conditions, in which octafunctional octakis(3‐hydroxypropyldimethylsiloxy)octasilsesquioxane (OHPS) and octa(aminophenyl)silsesquioxane (OAPS) nano‐cages were used as ATRP initiators. The polymerization was carried out at 50 °C in acetonitrile/water mixture. ¹H‐NMR and GPC were employed to characterize the obtained nanocomposites. GPC data revealed that the resulting nanocomposites exhibit unimodal and narrow molecular weight distributions indicating well‐controlled synthesis and well‐defined hybrid nanocomposites with star architecture. The influence of CSSQ nano‐cages on the thermal property of nanocomposites was investigated using differential scanning calorimetry and thermal gravimetric analysis (TGA). It was observed that the nanocomposites exhibit significantly higher glass transition temperature compared with its linear counterpart because of slow relaxation caused by the star‐like architecture. TGA study, however, did not reveal any significant improvement in thermal stability of nanocomposites as compared with linear PMMA. Finally, field emission scanning electron microscopy images of fractured surfaces of nanocomposite sample films showed well dispersed CSSQ nano‐cages in PMMA matrix without phase separation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 766–776, 2008     

Synthesis and characterization of biodegradable triblock copolymers based on bacterial poly[(R)‐3‐hydroxybutyrate] by atom transfer radical polymerization

Biodegradable poly(tert‐butyl acrylate)–poly[(R)‐3‐hydroxybutyrate]–poly (tert‐butyl acrylate) triblock copolymers based on bacterial poly[(R)‐3‐hydroxybutyrate] (PHB) were synthesized by atom transfer radical polymerization. The chain architectures of the triblock copolymers were confirmed by ¹H NMR and ¹³C NMR spectra. Gel permeation chromatography analysis was used to estimate the molecular weight characteristics and lengths of the PHB and poly(tert‐butyl acrylate) blocks of the copolymers. The thermal properties of the copolymers were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA showed that the triblock copolymers underwent stepwise thermal degradation and had better thermal stability than their respective homopolymers, whereas DSC analyses showed that a microphase‐separation structure was formed only in the triblock copolymers with the longer PHB block. As a similar result, from wide‐angle X‐ray diffraction experimentation, the crystalline phase of PHB could not be seen evidently in the triblock copolymers with the shorter PHB block. The enzymatic hydrolysis of the copolymer films was carried at 37 °C and pH 7.4 in a potassium phosphate buffer with an extracellular PHB depolymerase from Penicillum sp. The biodegradability of the triblock copolymers increased with an increase in the PHB block content. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4857–4869, 2005     

The influence of silicone shell on double-layered microcapsules in intumescent flame-retardant natural rubber composites

The mechanisms of the thermal degradation of polyhedral oligomeric octaphenylsilsesquioxane (OPS), octa(nitrophenyl)silsesquioxane (ONPS), and octa(aminophenyl)silsesquioxane (OAPS) were investigated. The –NO₂ or –NH₂ substituents on the phenyl group affected the mechanism of the POSS thermal degradation. The thermal stabilities of OPS, ONPS, and OAPS were characterized by TG and FTIR. Thermal degradation of OPS included mainly the degradation of caged polyhedral oligomeric silsesquioxane structures and phenyl groups. Nitro or amino substituents decreased its thermal stability. The thermal degradation processes of OPS, ONPS, and OAPS differed. Phenyl groups and cyclobutadiene were observed in the OPS degradation products. Oxygen radicals that caused intensive CO₂ release between 350 and 450 °C were generated by the degradation of ONPS –NO₂. OAPS released mainly aminophenyl groups at 370 °C, whereas a small number of phenyl groups decomposed at 500 °C. The OAPS reactivity could enhance the thermal stability of POSS structure in the polyimide OAPS composites.     

Deformation behavior of electrospun poly(L‐lactide‐co‐ε‐caprolactone) nonwoven membranes under uniaxial tensile loading

Biodegradable poly(L ‐lactide‐co‐ε‐caprolactone) copolymers with different L ‐lactide (LLA)/ε‐caprolactone (CL) ratios of 75/25 and 50/50 were electrospun into fine fibers. The deformation behavior of the electrospun membranes with randomly oriented structures was evaluated under uniaxial tensile loading. The electrospun membrane with a higher LLA content showed a significantly higher tensile modulus but a similar maximum stress and a lower ultimate strain in comparison with the membrane with a lower LLA content. The beaded fibers that formed in the membranes caused lower tensile properties. X‐ray diffraction and differential scanning calorimetry results suggested that the electrospun fine fibers developed highly oriented structures in CL‐unit sequences during the electrospinning process even though the concentration was only 25 wt %. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3205–3212, 2005     

Organic/inorganic hybrid epoxy nanocomposites based on octa(aminophenyl)silsesquioxane

Octa(aminophenyl)silsesquioxane (OAPS) was used as the curing agent of diglycidyl ether of bisphenol-A (DGEBA) epoxy resin. A study on comparison of DGEBA/OAPS with DGEBA/4,4′-diaminodiphenyl sulfone (DDS) epoxy resins was achieved. Differential scanning calorimetry was used to investigate the curing reaction and its kinetics, and the glass transition of DGEBA/OAPS. Thermogravimetric analysis was used to investigate thermal decomposition of the two kinds of epoxy resins. The reactions between amino groups and epoxy groups were investigated using Fourier transform infrared spectroscopy. Scanning electron microscopy was used to observe morphology of the two epoxy resins. The results indicated that OAPS had very good compatibility with DGEBA in molecular level, and could form a transparent DGEBA/OAPS resin. The curing reaction of the DGEBA/OAPS prepolymer could occur under low temperatures compared with DGEBA/DDS. The DGEBA/OAPS resin didn’t exhibit glass transition, but the DGEBA/DDS did, which meant that the large cage structure of OAPS limited the motion of chains between the cross-linking points. Measurements of the contact angle indicated that the DGEBA/OAPS showed larger angles with water than the DGEBA/DDS resin. Thermogravimetric analysis indicated that the incorporation of OAPS into epoxy system resulted in low mass loss rate and high char yield, but its initial decomposition temperature seemed to be lowered.     

Organic–inorganic copolymers with double‐decker silsesquioxane in the main chains by polymerization via click chemistry

A series of novel organic–inorganic copolymers with polyhedral oligomeric silsesquioxane (POSS) in the main chains were synthesized via the copper‐catalyzed Huisgen 1,3‐dipolar cycloaddition polymerization approach. Toward this end, we synthesized 3,13‐azidopropyloctaphenyl double‐decked silsesquioxane (DDSQ). This difunctional POSS macromer was used to copolymerize with α,ω‐dialkynyl‐terminated oligoethylenes with variable number of ethylene units. The organic–inorganic copolymers were obtained with the mass fraction of POSS up to 79%. Gel permeation chromatography showed that the high‐molecular‐weight copolymers were successfully obtained in all the cases. Differential scanning calorimetry showed that the amplitude of glass transitions for these copolymers was very feeble, suggesting that the segmental motions responsible for the glass transitions was highly restricted with DDSQ cages in the main chains. Thermogravimetric analysis showed that the organic–inorganic hybrid copolymers displayed extremely high thermal stability. Contact angle measurements showed that these organic–inorganic copolymers are highly hydrophobic and possessed very low surface energy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4221–4232     

Synthesis and self‐assembly of highly incompatible polybutadiene–poly(hexafluoropropylene oxide) diblock copolymers

A versatile coupling reaction for the preparation of polybutadiene–poly‐(hexafluoropropylene oxide) (BF) diblock copolymers is described. Six diblock copolymers with different block lengths were characterized by nuclear magnetic resonance spectroscopy and size exclusion chromatography; all six had total molecular weights below 15,000. Microphase separation of the block copolymers in the bulk state was established by small‐angle X‐ray scattering (SAXS) and differential scanning calorimetry. SAXS data suggest that the diblocks are characterized by an unusually large Flory‐Huggins interaction parameter, χ, on the order of 10. However, extraction of χ from the order–disorder transition gave large (order 1) but significantly different values, thereby suggesting that these copolymers are too small and too strongly interacting to be described by block copolymer mean‐field theory. Dynamic light scattering was used to analyze dilute solutions of the title block copolymers in four selective organic solvents; the sizes of the micelles formed were solvent dependent. The micellar aggregates were large and nonspherical, and this is also attributed to the high degree of incompatibility between the two immiscible blocks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3685–3694, 2005     

Polyhedral oligomeric silsesquioxane‐based fluoroether‐containing terpolymers: Synthesis,characterization and their water and oil repellency evaluation for cotton fabric

A series of polyhedral oligomeric silsesquioxane (POSS) based hybrid copolymers poly(POSS‐co‐methyl methacrylate ?co‐ 4‐vinylbenzyl fluoroether carboxylate) ( P(POSS‐MMA‐VBFC) ) were prepared via radical polymerization and characterized by nuclear magnetic resonance, fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, gel permeation chromatography, X‐ray powder diffraction, scanning electron microscopy and transmission electron microscopy. The thermal properties of these polymers (T_d > 250 °C) were improved by the introduction of POSS cage. The cotton fabrics coated with the polymers possessed excellent water and oil repellency. The water and salad oil contact angle could be achieved from 133° to 159° and from 127° to 141° respectively as the content of POSS in the polymer increased from 0 to 7.1 wt %. Moreover, the cotton fabric coated with the terpolymer was less flammable than the uncoated one. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ionic aggregation in random copolymers containing phosphonium ionic liquid monomers

Copolymers of n‐butyl acrylate and phosphonium ionic liquid monomers possessing various alkyl substituents and counterions were synthesized through a combination of conventional free radical copolymerization and anion exchange. Differential scanning calorimetry and dynamic mechanical analysis provided the thermal and mechanical properties of these phosphonium cation‐containing random copolymers. Factors including alkyl chain length of phosphonium substituents, counterion type, as well as ionic concentration significantly influenced the association of phosphonium cations. Phosphonium ionomers with trialkyl substituents on phosphonium cations did not display the characteristic small‐angle X‐ray scattering peak, suggesting the absence of ionic clusters. However, low q peaks in wide‐angle X‐ray diffraction was indicative of significant concentration fluctuations wherein the ionic monomeric units associated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

硅倍半氧烷改性聚酰亚胺(PI/Si)复合膜性能简

通过在聚酰亚胺(PI)中分别添加笼型八氨基苯基硅倍半氧烷(OAPS)、笼型八苯基硅倍半氧烷(OPS)、梯形聚苯基硅倍半氧烷(PPSQ)和无机纳米SiO2,制备了4种含硅聚酰亚胺(PI/Si)复合膜. 对PI/Si复合膜的相容性、力学性能、热性能和阻燃性能进行了研究. 结果表明,OAPS与PI间展现出较好的相容性,PPSQ次之,而OPS,SiO2与PI的相容性较差;但相容性与复合膜的力学和热性能无明显的对应关系. SiO2可提高PI的力学性能;PI/OAPS复合膜的Tg最高;OAPS,PPSQ或SiO2的加入使PI复合膜的热稳定性稍有提高,而少量OPS的加入大大降低PI膜的热稳定性. 这类PI/Si复合膜的显著特点是能够大幅提高PI膜的极限氧指数,含硅化合物能够增加PI燃烧后残炭量,使残炭的形貌得到显著改善. PI/Si复合膜在燃烧过程中在表面形成一层白色含硅包裹层,起到隔热隔氧及保护内层有机物不被燃烧的作用. 硅倍半氧烷对炭层形貌的改善显著,展现出比SiO2更好的阻燃性能.     

Thermal behavior and crystallization kinetics of random poly(ethylene‐Co‐2,2‐Bis[4‐(ethylenoxy)‐1,4‐phenylene]propane terephthalate) copolyesters

The thermal behavior of poly(ethylene‐co‐2,2‐bis[4‐(ethylenoxy)‐1,4‐phenylene]propane terephthalate) (PET/BHEEBT) copolymers was investigated by thermogravimetric analysis and differential scanning calorimetry. A good thermal stability was found for all the samples. The thermal analysis carried out using DSC technique showed that the T_m of the copolymers decreased with increasing BHEEBT unit content, differently from T_g, which on the contrary increased. Wide‐angle X‐ray diffraction measurements permitted identifying the kind of crystalline structure of PET in all the semicrystalline samples. The multiple endotherms similar to PET were also evidenced in the PET/BHEEBT samples, due to melting and recrystallization processes. By applying the Hoffman–Weeks' method, the T_m° of PET and its copolymers was derived. The isothermal crystallization kinetics was analyzed according to Avrami's treatment and values of the exponent n close to 3 were obtained, independently of T_c and composition. Moreover, the introduction of BHEEBT units was found to decrease PET crystallization rate. Lastly, the presence of a crystal‐amorphous interphase was evidenced. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1441–1454, 2005     

Packing manner of graft copolymers with rigid‐rod main chains and amorphous‐crystalline diblock copolymers as side chains

We have investigated the morphology and packing manner of graft copolymers consisting of rigid‐rod‐like poly(γ‐benzyl L ‐glutamate) (PBLG) main chains and grafted diblock copolymers of amorphous poly(propylene glycol) (PPG) and crystalline poly(ethylene glycol) (PEG). The results of differential scanning calorimetry and wide‐angle X‐ray scattering measurements for graft copolymers with higher side‐chain volume fractions suggest that the rodlike main chains and crystallized PEG chains exist in segregated domains. Small‐angle X‐ray scattering profiles for these samples show diffraction intensity maxima accompanied by higher order peaks, the positions of which suggest the formation of an ordered layered structure. From these observations, the graft copolymers are estimated to form repeated layered structure consisting of segregated PBLG, PPG, and PEG layers. A proposed model for molecular packing of the graft copolymers is consistent with the experimental observation that the repeating distance for the layered structure decreases with an increase in the volume fraction of side chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1904–1912, 2002     

Side‐chain crystallization behavior of graft copolymers consisting of amorphous main chain and crystalline side chains: Poly(methyl methacrylate)‐graft‐poly(ethylene glycol) and poly(methyl acrylate)‐graft‐poly(ethylene glycol)

Graft copolymers consisting of amorphous main chain, poly(methyl methacrylate) (PMMA), or poly(methyl acrylate) (PMAc), and crystalline side chains, poly(ethylene glycol) (PEG), have been prepared by copolymerization of PEG macromonomers with methyl methacrylate or methyl acrylate (MMAx or MACx, respectively). Because of the compatibility of PMMA/PEG and PMAc/PEG, from small‐angle X‐ray scattering results, the main and side chains in graft copolymers were suggested to be homogeneous in the molten state. Differential scanning calorimetry (DSC) cooling scans revealed that PEG side chains for graft copolymers with large PEG fractions were crystallized when the sample was cooled, with a cooling rate of 10 °C/min. The spherulite pattern observed by a polarized optical microscope suggested the growth of PEG crystalline lamellae. Crystallization of PEG in MMAx was more restrained than in MACx. From these results, we have concluded that the crystallization behavior of the grafted side chains is strongly influenced by the glass transition of a homogeneously molten sample as well as dilution of the crystallizable chains. Domain spacings for isothermally crystallized graft copolymers were described by interdigitating chain packing in crystalline–amorphous lamellar structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 79–86, 2005     

Self‐assembly and secondary structures of linear polypeptides tethered to polyhedral oligomeric silsesquioxane nanoparticles through click chemistry

In this study, we used click chemistry to synthesize a new macromolecular self‐assembling building blocks, linear polypeptide‐b‐polyhedral oligomeric silsesquioxane (POSS) copolymers, from a mono‐azido–functionalized POSS (N₃‐POSS) and several alkyne‐poly(γ‐benzyl‐L ‐glutamate) (alkyne‐PBLG) systems. The incorporation of the POSS unit at the chain end of the PBLG moiety allowed intramolecular hydrogen bonding to occur between the POSS and PBLG units, thereby enhancing the α‐helical conformation in the solid state, as determined through Fourier transform infrared spectroscopy and wide‐angle X‐ray diffraction analyses. POSS‐b‐PBLG underwent hierarchical self‐assembly, characterized using small‐angle X‐ray scattering, to form a bilayer‐like nanostructure featuring α‐helical or β‐sheet conformations and POSS aggregates. Thermogravimetric analysis indicated that the thermal degradation temperature increased significantly after incorporation of the POSS moiety, which presumably formed an inorganic protection layer on the nanocomposite's surface. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and properties of poly(ester‐phosphoester)s by lanthanum triphenolate‐catalyzed ring‐opening copolymerization

The ring‐opening copolymerization of methyl ethylene phosphate (MEP, 2‐methoxy‐2‐oxo‐1,3,2‐dioxaphospholane) and ε‐caprolactone (CL) was performed in bulk with lanthanum tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)s as single‐component catalyst, resulting in poly(ester‐phosphoester) random copolymers with high molecular weight and moderate molecular weight distribution. The properties of the copolymers were characterized by differential scanning calorimetry, X‐ray diffractometer, dynamic mechanical analysis, and static water contact angle measurement. The crystallinities of the copolymers were reduced with the increase of MEP molar fraction in the products. Moreover, copolymers with enhanced hydrophilicity and lower glass transition temperature could be obtained with higher MEP content, which may provide potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.