Free‐radical copolymerization of ethyl α‐hydroxymethylacrylate with methyl methacrylate by reversible addition–fragmentation chain transfer

The controlled free‐radical homopolymerization of ethyl α‐hydroxymethylacrylate and copolymerization with methyl methacrylate were performed in chlorobenzene at 70 °C by the reversible addition–fragmentation chain transfer polymerization technique with 2,2′‐azobisisobutyronitrile as the initiator. 2‐Phenylprop‐2‐yl dithiobenzoate and 2‐cyanoprop‐2‐yl dithiobenzoate were used as chain‐transfer agents in the homopolymerization, whereas only the former was used in the copolymerization. All reactions presented pseudolinear kinetics. The effect of the monomer feed ratio on the copolymerization kinetics was examined. The conversion level decreased when the proportion of ethyl α‐hydroxymethylacrylate in the monomer feed was larger. Kinetic studies indicated that the radical polymerizations proceeded with apparent living character according to experiments, demonstrating an increase in the molar mass with the monomer conversion and a relatively narrow molar mass distribution. All copolymers were statistical in chain structure, as confirmed by determinations of the monomer reactivity ratios. The monomer reactivity ratios were determined, and the Mayo–Lewis terminal model provided excellent predictions for the variations of the intermolecular structure over the entire conversion range. Additionally, the chemical modification of poly(ethyl α‐hydroxymethylacrylate) was carried out to introduce glucose pendant groups into the structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5618–5629, 2006     

Radical copolymerization of maleimide with ethyl α‐ethylacrylate and α‐ethylacrylic acid via RAFT

The copolymerization of maleimide (MI) with α‐ethylacrylic acid (EAA) and with ethyl α‐ethylacrylate (EEA) in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDB) was investigated. The copolymerization of MI and EAA was difficult to conduct with the reversible addition–fragmentation chain transfer (RAFT) mechanism because reinitiation of expelled radicals by fragmentation chain transfer was inhibited by the association of EAA in polar solvent and the strong interaction of the imino of MI with the carboxyl of EAA between the propagation chains. When the carboxylic group of EAA was esterified, then the copolymerization went well via RAFT, and alternating copolymers with controlled molecular weight were obtained. Combining by electron spin resonance showed a different result. It was found that before 30% of the comonomer conversion had occurred, the copolymer poly(EEA‐co‐MI) showed increasing molecular weight with the conversion and a rather narrow molecular weight distribution; then the molecular weight of the copolymer began to retard. This phenomenon of retardation was aggravated at high temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3828–3835, 2004     

Anionic alternating copolymerization of α‐arylacrylates with methyl methacrylate: Effect of monomer sequence on fluorescence

Anionic polymerizations of acrylates possessing 1‐pyrenyl (Py1), 1‐naphthyl (Np1), 2‐naphthyl (Np2), and 2‐fluorenyl (Fl2) groups as α‐substituents were investigated as well as the properties of the obtained polymers. Py1 and Np1 did not undergo polymerization, whereas Np2 and Fl2, annulated α‐phenylacrylates at 3,4‐position of the phenyl group, afforded homo‐oligomers and alternating copolymers with methyl methacrylate (MMA). The oligomer of Fl2 [oligo(Fl2)] exhibited strong excimer emission in diluted solution. In contrast, dominant monomer emission was observed for the alternating copolymer with MMA [poly(Fl2‐co‐MMA)]. In the alternating copolymer, MMA units could function as spacers preventing the association of pendant fluorene moieties to suppress the excimer formation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2806–2814     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Free-radical homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate in tetrahydrofuran

Ethyl α-hydroxymethylacrylate (EHMA) was polymerized in a 3 mol/L tetrahydrofuran solution at 50°C, using 2–2' azobisisobutyronitrile as initiator. The kinetic behavior indicates a higher polymerization rate for EHMA than for methyl methacrylate (MMA). Copolymerization reaction between MMA and EHMA, under the same experimental conditions, was carried out and values of r_MMA = 1.264 and r_EHMA = 1.285 were found for the reactivity ratios. The comparison of triad sequences as determined from Bernouillian statistic to those calculated from the experimental spliting of O-methyl and α-methyl ¹H-NMR signals of the copolymers confirm the obtained results. © 1992 John Wiley & Sons, Inc.     

Controlled/living free‐radical copolymerization of 4‐(azidocarbonyl) phenyl methacrylate with methyl acrylate under 60Co γ‐ray irradiation

A new vinyl acyl azide monomer, 4‐(azidocarbonyl) phenyl methacrylate, has been synthesized and characterized by NMR and FTIR spectroscopy. The thermal stability of the new monomer has been investigated with FTIR and thermal gravimetry/differential thermal analysis (TG/DTA), and the monomer has been demonstrated to be stable below 50 °C in the solid state. The copolymerizations of the new monomer with methyl acrylate have been carried out at room temperature under ⁶⁰Co γ‐ray irradiation in the presence of benzyl 1H‐imidazole‐1‐carbodithioate. The results show that the polymerizations bear all the characteristics of controlled/living free‐radical polymerizations, such as the molecular weight increasing linearly with the monomer conversion, the molecular weight distribution being narrow (<1.20), and a linear relationship existing between ln([M]₀/[M]) and the polymerization time. The data from ¹H NMR and FTIR confirm that no change in the acyl azide groups has occurred in the polymerization process and that acyl azide copolymers have been obtained. The thermal stability of the polymers has also been investigated with TG/DTA and FTIR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2609–2616, 2007     

Controllability of radical copolymerization of maleimide and ethyl α‐(n‐propyl)acrylate using 1,1,2,2‐tetraphenyl‐1,2‐bis(trimethylsilyloxy) ethane as initiator

The radical copolymerization of maleimide (MI) and ethyl α‐propylacrylate was performed using 1,1,2,2‐tetraphenyl‐1,2‐bis(trimethylsilyloxy) ethane (TPSE) as initiator. The whole copolymerization process might be divided into two stages: in the first stage, the copolymerization was carried out on the common radical mechanism, the molecular weight of the copolymer increased rapidly in much lower conversion (< 85%), and did not depend on the polymerization time and conversion; in the second stage, molecular weight of the copolymer increased linearly with the conversion and the polymerization time. It was found, however, when the conversion was higher than a certain value, for example, more than 36%, the molecular weight of the copolymer was nearly unchangeable with the polymerization time and the molecular weight distribution was widened. The effect of reaction conditions on copolymerization was discussed and the reactivity ratios were calculated by the Kelen–Tudos method, the values were r_MI = 0.13 ± 0.03, r_EPA = 0.58 ± 0.06 for TPSE system and r_MI = 0.12 ± 0.03, r_EPA = 0.52 ± 0.06 for AIBN system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2872–2878, 2000     

Polymerization and copolymerization of α-alkylacrylic acids and characterization of their polymers

α-Alkylacrylic acids (RAA's) bearing n-alkyl groups were found to homopolymerize with slower rates than acrylic and methacrylic acids to number-average molecular, weight (M?_n) of 10⁴ or above. When the α-substituent was a branched alkyl group, the polymerization rate and M?_n decreased further. Reactivities of RAA's in copolymerization were interpreted by steric and resonance effects of the alkyl group using Hancock's steric substituent constant. Comparison of the reactivities of RAA's with those of methyl α-alkylacrylates revealed that replacement with the smaller carboxyl group facilitates polymerization and copolymerization. Preference of co-syndiotactic propagation in the copolymerization of methacrylic acid with styrene changed to random fashion in the copolymerization of the α-higher alkyl derivatives. After methylation with diazomethane, the homopolymers were shown to be thermally less stable than poly(methyl methacrylate). T_g's of poly(methyl α-ethylacrylate) and poly(methyl α-n-propylacrylate) were 57 and 25°C, respectively.     

Radical homo- and copolymerizations of methyl α-trifluoroacetoxyacrylate

Radical homo- and copolymerizations of methyl α-trifluoroacetoxyacrylate (MTFAA) are studied by using azo initiators at 40 and 60°C. The rate of the homopolymerization of MTFAA was lower than that of methyl α-acetoxyacrylate. Monomer reactivity ratios (r), and Q and e values were estimated to be r₁ = 0.03, r₂ = 0.27, Q₁ = 0.65, and e₁ = 1.38 from the copolymerization of MTFAA (M₁) and styrene (M₂) at 60°C. Preferential crosspropagation was observed in particular in the copolymerization of MTFAA and α-methylstyrene. The influence of replacing the hydrogens of the acetoxy moiety of the acyloxyacrylate with the fluorines upon the copolymerization reactivity is discussed on the basis of the ¹³C-NMR chemical shift of various acyloxyacrylates. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3537–3541, 1997     

α‐olefin homopolymerization and ethylene/1‐hexene copolymerization catalysed by novel ansa‐group IV complexes/MAO system

The catalytic properties of a set of ansa‐complexes (R‐Ph)₂C(Cp)(Ind)MCl₂ [R = ^tBu, M = Ti ( 3 ), Zr ( 4 ) or Hf ( 5 ); R = MeO, M = Zr ( 6 ), Hf ( 7 )] in α‐olefin homopolymerization and ethylene/1‐hexene copolymerization were explored in the presence of MAO (methylaluminoxane). Complex 4 with steric bulk ^tBu group on phenyl exhibited remarkable catalytic activity for ethylene polymerization. It was 1.6‐fold more active than complex 11 [Ph₂C(Cp)(Ind)ZrCl₂] at 11 atm ethylene pressure and was 4.8‐fold more active at 1 atm pressure. The introduction of bulk substituent ^tBu into phenyl groups not only increased the catalytic activity greatly but also enhanced the content of 1‐hexene in ethylene/1‐hexene copolymerization. The highest 1‐hexene incorporation was 25.4%. In addition, 4 was also active for propylene and 1‐hexene homopolymerization, respectively, and low isotactic polypropylene (mmmm = 11.3%) and isotactic polyhexene (mmmm = 31.6%) were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Spontaneous alternating copolymerization of N-phenylmaleimide with ethyl α-phenylacrylate

The spontaneous copolymerization of N-phenylmaleimide (NPMI) (M₁) with ethyl α-phenylacrylate (EPA)(M₂) were carried out in dioxane at 85°C. A high alternating tendency was observed. The monomer reactivity ratios were r₁ = 0.07 ±0.01 and r₂ = 0.09 ± 0.02. The maximum copolymerization rate and molecular weight occurs at 70–80 mol% (M₁) in feed ratio. The spontaneous alternating copolymerization is considered to be carried out via a contact-type charge transfer complex (CTC) formed between the monomers. Thermogravimetric analyses (TGA) indicate the resulting copolymers have high thermal stability. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2927–2931, 1998     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

One‐pot inimer promoted ROCP synthesis of branched copolyesters using α‐hydroxy‐γ‐butyrolactone as the branching reagent

An array of branched poly(?‐caprolactone)s was successfully synthesized using an one‐pot inimer promoted ring‐opening multibranching copolymerization (ROCP) reaction. The biorenewable, commercially available yet unexploited comonomer and initiator 2‐hydroxy‐γ‐butyrolactone was chosen as the inimer to extend the use of 5‐membered lactones to branched structures and simultaneously avoiding the typical tedious work involved in the inimer preparation. Reactions were carried out both in bulk and in solution using stannous octoate (Sn(Oct)₂) as the catalyst. Polymerizations with inimer equivalents varying from 0.01 to 0.2 were conducted which resulted in polymers with a degree of branching ranging from 0.049 to 0.124. Detailed ROCP kinetics of different inimer systems were compared to illustrate the branch formation mechanism. The resulting polymer structures were confirmed by ¹H, ¹³C, and ₁H‐₁₃C HSQC NMR and SEC (RI detector and triple detectors). The thermal properties of polymers with different degree of branching were investigated by DSC, confirming the branch formation. Through this work, we have extended the current use of the non‐homopolymerizable γ‐butyrolactone to the branched polymers and thoroughly examined its behaviors in ROCP. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1908–1918     

Free‐radical copolymerization of styrene and m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate studied by 1H NMR kinetic experiments

The free‐radical copolymerization of m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate (TMI) and styrene was studied with ¹H NMR kinetic experiments at 70 °C. Monomer conversion vs time data were used to determine the ratio k_p × k_t^?0.5 for various comonomer mixture compositions (where k_p is the propagation rate coefficient and k_t is the termination rate coefficient). The ratio k_p × k_t^?0.5 varied from 25.9 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for pure styrene to 2.03 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for 73 mol % TMI, indicating a significant decrease in the rate of polymerization with increasing TMI content in the reaction mixture. Traces of the individual monomer conversion versus time were used to map out the comonomer mixture composition drift up to overall monomer conversions of 35%. Within this conversion range, a slight but significant depletion of styrene in the monomer feed was observed. This depletion became more pronounced at higher levels of TMI in the initial comonomer mixture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1064–1074, 2002