Crystallization and melting behavior of liquid crystalline copolyesters based on poly(ethylene terephthalate)

A series of copolyesters were prepared by the incorporation of p‐hydroxybenzoic acid (HBA), hydroquinone (HQ), and terephthalic acid (TA) into poly(ethylene terephthalate) (PET). On the basis of viscosity measurements, high molar mass copolyesters were obtained in the syntheses, and ¹H‐NMR analyses indicated the total insertion of comonomers. They exhibit nematic phase above melting temperature, as observed by polarized light microscope (PLM). Their crystallization and melting behaviors were also studied by differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD). It was found that these copolyesters are more crystalline than copolyesters prepared from PET and HBA. Introduction of HQ/TA disrupts longer rigid‐rod sequences formed by HBA, and thus enhances molecular motion and increases crystallization rate and crystallinity. Isothermal crystallization at solid phase polymerization conditions (up to 24 h at 200°C) resulted in increased copolymer randomness (by NMR) and higher melting point, the latter attributed to structural annealing. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 369–377, 1999     

Surface microcracks decoration and disclination defects of wholly aromatic liquid crystalline copolyesters

An intensive study has been conducted to map the director fields of disclination of nematic liquid crystalline copolyesters. In this study, films of two wholly aromatic main-chain polyesters containing para- (ABA/MH/TFTA) and meta-linkages (ABA/MH/TFIA) (ABA, p-acetoxybenzoic acid; MH, maleic hydrazine; TFTA, tetrafluoroterephthalic acid; TFIA, tetrafluoroisophthalic acid) were synthesized to investigate the effects of kinks on liquid crystallinity, disclination strength (S), and surface microcracks decoration. These two copolyesters were prepared by in-situ thin film polymerization and characterized by polarizing light microscope, wide-angle X-ray diffraction, as well as "rotational isomeric states" (RIS) Metropolis Monte Carlo (RMMC) simulation. An optical microscope shows that the surface microcracks forms in the nematic-mosaic texture during a rapid quenching. The ABA/MH/TFTA film exhibits disclination strength with S = +1 and S = -(1)/(2); however, disclination strengths with S = +/-1 have been observed in the ABA/MH/TFIA system. To our best knowledge, this is the first paper reporting the effects and evidence of kink (meta and para moieties) on topological defect of disclination. In addition, the RMMC analysis supports the liquid crystal formation in both polyester films with a persistence ratio greater than 6.42.     

Synthesis and eutectic behavior of liquid crystalline copolyesters

A series of liquid crystalline copolyesters, derived from 1,4‐hydroxy‐benzoic acid (HBA), 6‐hydroxy‐2‐naphthoic acid (HNA), terephthalic acid (TA), and hydroquinone (HQ), were prepared; crystallization, melting and solid‐state structure of the copolyesters were studied by using differential scanning calorimetry (DSC) and wide‐angle x‐ray diffraction (WAXD). It was found that the variation of melting point of the copolyesters with increasing HBA mol % exhibits eutectic melting behavior at a constant mole ratio of HNA, and the extrapolated eutectic temperature decreases linearly with increasing HNA mol %. WAXD analysis of the copolyesters indicates that the d‐spacing related to three‐dimensional order increases first and then decreases with increasing HBA mol %. The increase of the d‐spacing, consistent with looser packing of chains, leads to the reduction of melting point and most likely accounts for the eutectic behavior observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2171–2177, 2009     

Thermal Properties and Crystallinity of Thermotropic Liquid Crystalline Copolyesters Prepared from Poly(ethylene terephtalate) (PET) and Rigid Aromatic Units

A series of copolyesters were synthesized by melt‐polycondensation reaction of poly(ethylene terephtalate) (PET) with various proportions of equimolar compositions of p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephtalic acid (TPA). Viscosity, liquid crystallinity, thermal properties, degree of crystallinity and thermal stabilitiy of these copolyesters were investigated by Ubbelohde viscometer, hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and thermogravimetric analysis (TGA), respectively. On the basis of viscosity measurement, it was observed that intrinsic viscosity values of the copolyesters are increased regularly with increasing amounts of aromatic units (p‐ABA, HQDA and TPA) in the polymer chain. Thermotropic liquid crystalline behavior was observed in the copolyesters containing over 50 mol% of rigid p‐ABA/HQDA/TPA aromatic units. DSC analysis of the anisotropic copolyesters revealed broad and weak endotherms associated with the nematic phases, and the melting temperatures were found to be in the processable region. As the mol% of PET in the polymer chain increased, the specific enthalpies of fusion and the degree of crystallinity of the copolyesters were also increased regularly.     

Nonisothermal crystallization kinetics of biodegradable poly(butylene succinate‐co‐propylene succinate)s

Poly(butylene succinate) (PBSu) and two poly(butylene succinate‐co‐propylene succinate)s were synthesized via the direct polycondensation reaction. The copolyesters were characterized as having 7.0.and 11.5 mol % propylene succinate (PS) units, respectively, by ¹H NMR. A differential scanning calorimeter (DSC) and a polarized light microscope (PLM) adopted to study the nonisothermal crystallization of these polyesters at a cooling rate of 1, 2, 3, 5, 6, and 10 °C/min. Morphology and the isothermal growth rates of spherulites under PLM experiments were monitored and obtained by curve‐fitting. These continuous rate data were analyzed with the Lauritzen?Hoffman equation. A transition of regime II → III was found at 95.6, 84.4, and 77.3 °C for PBSu, PBPSu 95/5, and PBPSu 90/10, respectively. DSC exothermic curves show that all of the nonisothermal crystallization occurred in regime III. DSC data were analyzed using modified Avrami, Ozawa, Mo, Friedman, and Vyazovkin equations. All the results of PLM and DSC measurements indicate that incorporation of minor PS units into PBSu markedly inhibits the crystallization of the resulting polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1299–1308, 2010     

Effect of Polycondensation Reaction Conditions on the Properties of Thermotropic Liquid‐Crystalline Copolyester

In this study a range of wholly aromatic copolyesters based on kink m‐acetoxybenzoic acid (m‐ABA) monomer (33 mol%) and equimolar‐linear p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephthalic acid (TPA) monomers (67 mol%) have been synthesized by melt polycondensation reaction process at 280°C and 260°C for different time intervals. Characterization of copolyesters were performed by solution viscosity measurement, wide–angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), hot‐stage polarized light microscopy, proton‐nuclear magnetic resonance analysis (¹H‐NMR). According to the results obtained, copolyesters showed thermotropic liquid crystalline behavior in an appropriate temperature range. The copolyesters were prepared in high yields. It was observed that the intrinsic viscosities of the copolyesters are increased regularly with increasing polymerization time and temperature. All the copolyesters were soluble in a trifluoroacetic acid/dichloromethane (30:70 v/v) except the copolyesters which were synthesized at 280°C in 5 h. According to the WAXD results; the degree of crystallinity of copolyesters were found to be between 5–15%. DSC and hot stage polarized light microscopy results showed that all the copolyesters are melt processable and a significant molecular interaction exist in a very broad temperature range (160°C and 165°C) in the nematic mesophase. The T_g values are increased with an increasing polycondensation reaction time and temperature and they were observed between 93–126°C. Fibers prepared by a hand‐spinning technique from the polymer melt exhibit well‐developed fibrillar structure parallel to the fiber axis.     

Synthesis and characterization of fully aromatic thermotropic liquid‐crystalline copolyesters containing m‐hydroxybenzoic acid units

A series of fully aromatic copolyesters based on p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA), terephthalic acid (TPA), and m‐acetoxybenzoic acid (m‐ABA) were prepared by a modified melt‐polycondensation reaction. The copolyesters were characterized by DSC, thermogravimetric analysis, ¹H NMR, polarized optical microscopy, X‐ray diffraction, and intrinsic viscosity measurements. The copolyesters exhibited nematic liquid‐crystalline phases in a broad temperature range of about 150 °C, when the content of linear (p‐ABA, HQDA, and TPA) units was over 67 mol %. DSC analysis of the anisotropic copolyesters revealed broad endotherms associated with the nematic phases, and the melting or flow temperatures were found to be in the processable region. The flow temperatures and crystal‐to‐nematic and nematic‐to‐isotropic transitions depend on the type of linear monomer units, and these transitions increased as the content of the p‐ABA units increased, as compared to the HQDA/TPA units. When the content of the p‐ABA units increased, as compared to other linear units (HQDA and TPA), the intrinsic viscosity and degree of crystallinity of the copolyesters also increased, implying a higher reactivity for p‐ABA in the p‐ABA/HQDA/TPA/m‐ABA polymer system. The aromatic region in the ¹H NMR spectra of the copolyesters containing equal molar compositions of p‐ABA, HQDA, and TPA units were sensitive to the sequence distribution of aromatic rings. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3263–3277, 2001     

A kinked unit‐containing thermotropic liquid crystalline copolyester with low glass transition temperature and broad phase transition temperature

A novel phosphorus‐containing thermotropic liquid crystalline copolyester with kinked unit named as poly(hydroxybenzate‐co‐DOPO‐benzenediol dihydrodipheyl ether terephthalate) (PHDDT) was synthesized successfully by melting transesterification from terephthalic acid (TPA), p‐hydroxybenzoic acid (p‐ABH), 2‐(6‐oxid‐6H‐dibenz(c, e) (1,2) oxaphosphorin 6‐yl)1,4‐benzenediol (DOPO‐HQ), and 4,4′‐dihydroxydiphenyl ether (DOP). The chemical structure, the mesophase behavior, and the thermal properties of the copolyesters were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (¹H, ¹³C, and ³¹P NMR), wide‐angle X‐ray diffraction, polarizing light microscopy (PLM), differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. Results suggested that PHDDTs exhibited the typical nematic mesophase that occurred at low temperatures and maintained in a broad temperature range from 230 °C to higher than 400 °C, and had low glass transition temperature ranging from 154.5 to 166.9 °C. The novel phosphorus‐containing thermotropic liquid crystalline copolyester will have a potential application in preparing various in situ reinforced polymer materials with excellent mechanical properties and flame retardancy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4703–4709, 2009     

Thermal transition of a wholly aromatic thermotropic liquid crystalline copolyester

A copolyester was prepared from p-hydroxybenzoic acid (HBA), 2,6-naphthalene dicaboxylic acid (NDA), and hydroquinone (HQ). Thermal transition behavior and the crystal structure of this copolyester were investigated by using polarized light microscopy (PLM), differential scanning calorimetry (DSC), and wide-angle X-ray diffraction (WAXD) after annealing at solid-phase polymerization conditions. A glass transition or newly ordered structure in the 270–290°C range was observed on annealing at 260°C, which increased with annealing time, attributed to mobility and reactive rearrangement in amorphous regions. Broad and unclear WAXD profiles and multimelting behaviors were found on annealing at 280°C, and explained by hexagonal and orthorhombic lattice formation and transformation. A large increase in melting temperature was observed only on annealing at a temperature (320°C) near the crystal–nematic transition, suggesting annealing temperatures near the melting point are required for sufficient mobility to afford crystalline rearrangement via transesterification. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3763–3769, 1999     

A novel phosphorus‐containing thermotropic liquid crystalline poly(ester‐imide) with high flame retardancy

A novel phosphorus–nitrogen thermotropic liquid crystalline poly(ester‐imide) (PN‐TLCP) derived from p‐acetoxybenzoic acid (ABA), terephthalic acid (TPA), acetylated 2‐(6‐oxide‐6H‐dibenz<c,e><1,2>oxa phosphorin‐ 6‐yl)‐1,4‐dihydroxy phenylene (DOPO‐AHQ) and N,N'‐hexane‐1,6‐diylbis(trimellitimide) was prepared by melt transesterification. The chemical structure, the mesophase behavior, and the thermal properties of the copolymer were investigated with Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, wide‐angle X‐ray diffraction (WAXD), hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PN‐TLCP exhibited a nematic mesophase with a strong birefringence at a low and broad mesomorphic temperature ranging from 220 to 350°C, an initial flow temperature as low as about 190°C and a glass transition temperature of about 160°C. PN‐TLCP has also good thermal stability, high char residues and excellent flame retardancy (limiting oxygen index, LOI = 71 and UL‐94 V‐0 rating). Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization, and in vitro degradation of thermotropic polyesters and copolyesters based on terephthalic acid, 3‐(4‐hydroxyphenyl)propionic acid,and glycols

A new series of thermotropic liquid‐crystalline (LC) polyesters were prepared from a diacyl chloride derivative of 4,4′‐(terephthaloyldioxy)‐di‐4‐phenylpropionic acid (PTP) and glycols with a different number of methylene groups (n) [HO(CH₂)_n OH, n = 6–10, 12] by high‐temperature solution polycondensation in diphenyl oxide. PTP6/10 and PTP6/hydroquinone (H) LC copolyesters were also prepared according to a similar procedure. The chemical structure, LC, phase‐transition behaviors, thermal stability, and solubility were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H and ¹³C NMR spectra, differential scanning calorimetry (DSC), thermogravimetric analysis, and a polarizing light microscope. The melting and isotropization temperatures decreased in a zigzag manner as the number of n increased. All of the polyesters formed a nematic phase with the exception of PTP8. The temperature ranges of the mesophase (ΔT) were much wider for the polyesters with an odd number of n's than those with an even number. ΔT increased markedly for the PTP6/10 and PTP6/H copolyesters. The in vitro degradations of the polymers were ascertained by enzymatic hydrolysis and alkaline hydrolysis. The model compound, PTP dihexylester, was synthesized and found to be degraded into terephthalic acid, 3‐(4‐hydroxyphenyl)propionic acid, and 1‐hexanol by Rhizopus delemar lipase, but PTPn homopolyesters and PTP6/10 and PTP6/H copolyesters were resistant to Rhizopus delemar hydrolysis. They were degradable in a sodium hydroxide buffer solution of pH 12 at 60 °C, depending on the number of n's and the copolymer composition. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3043–3051, 2001     

Effects of comonomer sequential structure on thermal and crystallization behaviors of biodegradable poly(butylene succinate‐co‐butylene terephthalate)s

In this work, new investigations on the effect of comonomer sequential structure on the thermal and crystallization behaviors and biodegradability have been implemented for the biodegradable poly(butylene succinate‐co‐butylene terephthalate) (PBST) as well as aliphatic poly(butylene succinate) (PBS). At first, these copolyesters were efficiently synthesized from dimethyl succinate and/or dimethyl terephthalate and 1,4‐butanediol via condensation polymerization in bulk. Subsequently, their molecular weights and macromolecular chain structures were analyzed by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. By means of differential scanning calorimeter (DSC) and wide‐angle X‐ray diffractometer (WAXD), thermal and crystallization behaviors of these synthesized aromatic–aliphatic copolyesters were further explored. It was demonstrated that the synthesized copolyesters were revealed to have random comonomer sequential structures with thermal and crystallization properties strongly depending on their comonomer molar compositions, and that crystal lattice structures of the new crystallizable copolyesters shifted from the monoclinic crystal of semicrystalline PBS to triclinic lattice of the poly(butylene terephthalate) (PBT) with increasing the terephthalate comonomer composition, and the minor comonomer components were suggested to be trapped in the crystallizable component domains as defects. In addition, the enzymatic degradability was also characterized for the copolyesters film samples. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1635–1644, 2006     

Synthesis and characterization of a biodegradable amphiphilic copolymer based on branched poly(ϵ‐caprolactone) and poly(ethylene glycol)

A novel biodegradable amphiphilic copolymer with hydrophobic poly(ε‐caprolactone) branches containing cholic acid moiety and a hydrophilic poly(ethylene glycol) chain was synthesized. The copolymer was characterized by FTIR, ¹H NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), polarizing light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD) analysis. The amphiphilic copolymer could self‐assemble into micelles in an aqueous solution. The critical micelle concentration of the amphiphilic copolymer was determined by fluorescence spectroscopy. A nanoparticle drug delivery system with a regularly spherical shape was prepared with high encapsulation efficiency. The in vitro drug release from the drug‐loaded polymeric nanoparticles was investigated. Because of the branched structure of the hydrophobic part of the copolymer and the relatively fast degradation rate of the copolymer, an improved release behavior was observed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5256–5265, 2007     

含4，4＇－二羟基二苯酮热致液晶四元共聚酯的合成与表征

含４，４＇－二羟基二苯酮热致液晶四元共聚酯的合成与表征董德文，韩平，倪玉山，丁孟贤，韩伟（中国科学院长春应用化学研究所长春１３００２２）（吉林化工学院化工系吉林）关键词　热致液晶，共聚酯，向列型，二羟基二苯酮关于热致液晶芳香族聚酯的研究已有大量的报道...     

Synthesis and characterization of a series of wholly aromatic copolyesters containing 2‐(α‐phenylisopropyl)hydroquinone moiety

Two series of new wholly aromatic thermotropic copolyesters containing the 2‐(α‐phenylisopropyl)hydroquinone (PIHQ) moiety have been synthesized and their basic properties such as glass transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity were studied by differential scanning calorimetry (DSC), thermogravimetry (TG), and wide‐angle X‐ray diffractometry (WAXD) and on a polarizing microscope. The first series was prepared from acetylated PIHQ, terephthalic acid (TPA), and 2,6‐naphthalenedicarboxylic acid (NDA), and the second series from acetylated PIHQ, TPA, and 1,1′‐biphenyl‐4,4′‐dicarboxylic acid (BDA). The T_g values (152–168°C) of the two series are not much different, although the values for the first series appear slightly higher. The T_m values (287–378°C) and the degree of crystallinity of the first series are appreciably greater than those of the second series. Such differences can be explained by the geometric structure of NDA and BDA moieties. All of the present polyesters are thermotropic and nematic. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 881–889, 1999     

A phosphorus‐containing thermotropic liquid crystalline copolyester with low mesophase temperature and high flame retardance

A novel phosphorus‐containing thermotropic liquid crystalline copolyester with flexible spacers (P‐TLCP‐FS) was synthesized by melt transesterification from p‐acetoxybenzoic acid (p‐ABA), terephthalic acid (TPA), ethylene glycol, and acetylated 2‐(6‐oxid‐6H‐dibenz(c,e) (1,2) oxaphosphorin 6‐yl) 1,4‐benzenediol (AODOPB). The chemical structure and properties of the obtained P‐TLCP‐FS were characterized by Fourier‐transform infrared spectroscopy (FT‐IR), proton nuclear magnetic resonance spectroscopy (¹H‐NMR), inherent viscosity measurements, differential scanning calorimetry (DSC), thermogravimetry (TGA), polarizing light microscopy (PLM), and X‐ray diffraction (XRD) analysis. P‐TLCP‐FS had inherent viscosities of 0.92–1.12 dL/g and exhibited low and wide mesophase temperatures, ranging from 185 to 330 °C, which can match with the processing temperatures of most conventional polymers and high flame retardancy with a limiting oxygen index value of 70% and UL‐94 V‐0 rating. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5752–5759, 2008     

Crystallization behavior of polyethers containing odd numbers of methylene spacers from the isotropic and liquid crystalline states

A series of thermotropic polyethers synthesized from 1-(4-hydroxyphenyl) - 2 - (2 - methyl - 4 - hydroxyphenyl) - ethane and α,ω-dibromo-n-alkanes with odd numbers of methylene units (MBPE-n = odd) shows monotropic mesophase behavior. In isothermal differential scanning calorimetry (DSC) experiments, two—sometimes even three—exothermic transition processes can be observed when the crystallization temperature is below the mesophase transition temperature, while only one exothermic process is present above the mesophase transition temperature. The melting behavior of the crystals grown from the mesophase and from the isotropic melt states is different. The crystals grown from the mesophase state exhibit a larger overall heat of transition and a higher transition temperature compared with those grown from the isotropic melt. This may be attributed to the molecular interfacial connections between the crystal and amorphous regions when MBPEs crystallize from the mesophase state. The difference in morphology between the crystals grown from the different states has also been studied with polarized light microscopy (PLM) and transmission electronic microscopy (TEM). The structures of the crystals grown from the different states are, however, the same, as evidenced through wide-angle X-ray diffraction (WAXD) measurements. From the banded morphology of MBPE samples observed from PLM, the defect textures observed through TEM and the results of WAXD experiments, this mesophase can be identified as a nematic liquid crystal state.     

Synthesis and characterization of mesogen‐jacketed liquid‐crystal polymers based on 2,5‐bis(4′‐alkoxyphenyl)styrene

A series of novel mesogen‐jacketed liquid‐crystal polymers, poly[2,5‐bis(4′‐alkoxyphenyl)‐styrene] (P‐n, n = 1–11), were prepared via free‐radical polymerization of newly synthesized monomers, 2,5‐bis(4′‐alkoxyphenyl)styrene (M‐n, n = 1–11). The influence of the alkoxy tail length on the liquid‐crystalline behaviors of the monomers and the polymers was investigated with differential scanning calorimetry (DSC), thermogravimetry, polarized optical microscopy (POM), and wide‐angle X‐ray diffraction (WAXD). The monomers with n = 1–4, 9, and 11 were monotropic nematic liquid crystals. All other monomers exhibited enantiotropic nematic properties. Their melting points (T_m's) decreased first as n increased to 6, after which T_m increased slightly at longer spacer lengths. The isotropic–nematic transition temperatures decreased regularly with increasing n values in an odd–even way. The glass‐transition temperatures (T_g's) of the polymers first decreased as the tail lengths increased and then leveled off when n ≥ 7. All polymers were thermally stable and entered the mesophase at a temperature above T_g. Upon further heating, no mesophase‐to‐isotropic melt transition was observed before the polymers decomposed. WAXD studies indicated that an irreversible order–order transition for the polymers with short tails (n ≤ 5) and a reversible order–order transition for those with elongated tails (n ≥ 6) occurred at a temperature much higher than T_g. However, such a transition could not be identified by POM and could be detected by DSC only on heating scans for the polymers with long tails (n ≥ 7). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1454–1464, 2003     

Thermotropic liquid-crystalline copolyesters containing substituted phenylene terephthalate and ethylene terephthalate units

Three series of aromatic, thermotropic copolyesters, based on terephthalic acid (TA), ethylene glycol (EG), and another diol were prepared. The third monomer was selected from three different hydroquinones including, ethoxyhydroquinone (EHQ), phenylhydroquinone (PHQ), and hydroquinone itself (HQ). The amounts of the different hydroquinone terephthalate units were varied while the amounts of ethylene terephthalate units remained constant. The copolymers and terpolymers were characterized for solubility, for morphology by polarized light microscopy (PLM), for molecular weight by solution viscometry, and by NMR, DSC, and TGA. At elevated temperatures all samples, when observed by PLM, displayed the characteristic texture of a nematic phase. The melting transition temperatures, T_m, were found to vary from 255 to 325°C, while the 5 wt % loss temperatures, T_d, were found to vary from 330 to 440°C. The inherent viscosities varied from 0.6 to 1.9 dL/g. Increases in the HQ monomer content caused a decreased solubility and an increase in melting point. Copolymer compositions determined by NMR showed that only about one-half of the EG added was incorporated into the copolymers. © 1997 John Wiley & Sons, Inc.     

Biodegradable poly(alkylene succinate) blends: Thermal behavior and miscibility study

New binary blends composed of poly(ethylene succinate) and poly(propylene succinate) or poly(ethylene succinate) and poly(butylene succinate) were prepared. Both PESu/PPSu and PESu/PBSu systems belong to semicrystalline/semicrystalline pairs. The miscibility and crystallization behavior was investigated using differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD), and polarizing light microscopy (PLM). Blends of PESu and PPSu exhibited a single composition dependent glass transition temperature over the entire range of composition, indicating that the system is miscible. The melting point depression of the high melting temperature component, PESu, was analyzed according to the Nishi‐Wang equation. A negative polymer–polymer interaction parameter was obtained, indicating that the blends are thermodynamically miscible in the melt. The two components crystallized sequentially when the blends were cooled rapidly to a low temperature. DSC traces of PESu/PBSu blends after quenching showed two distinct composition dependent glass transition temperatures between those of the neat polymers, showing that the polymers are partially miscible. The amorphous PESu/PBSu blends in the intermediate compositions showed three cold‐crystallization peaks, indicating the influence of mixing. The crystallization rates of PBSu were reduced and those of PESu were increased. WAXD showed reduced crystallinity and peak broadening in the patterns of the blends of intermediate compositions, while no spherulites could be detected by PLM. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 584–597, 2006