New polymer syntheses. 107. Aliphatic poly(thio ester)s by ring‐opening polycondensation of 2‐stanna‐1,3‐dithiacycloalkanes

We prepared 2,2‐dibutyl‐2‐stanna‐1,3‐dithiacycloalkanes from dibutyltin oxide and α,ω‐dimercaptoalkanes. Heterocycles with five‐, six‐, seven‐, or nine‐ring members were used as bifunctional monomers for polycondensations with aliphatic dicarboxylic acid chlorides. These polycondensations conducted in bulk were highly exothermic and yielded poly(thio ester)s with number average molecular weights (M_n's) in the range of 5000–30,000 Da. These poly(thio ester)s proved to be rapidly crystallizing materials with melting temperatures in the range of 90–150 °C. In addition to the success of the new synthetic approach, two interesting and unpredictable results were obtained. All volatile species detectable by matrix assisted laser desorption induced‐time of flight (MALDI‐TOF) mass spectrometry were cyclic oligo‐ and poly(thio ester)s. Second, several polyesters showed a reversible first‐order change of the crystal modification as identified by differential scanning calorimetry measurements and X‐ray scattering with variation of the temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3656–3664, 2000     

Ring‐opening polymerization of ε‐caprolactone via the bismuth‐2‐mercaptoethanol complex

A complex consisting of one Bi³⁺ ion and two 2‐mercaptoethanol units (BiME₂) was used as initiator for the ring‐opening polymerization of ε‐caprolactone in bulk. A kinetic comparison showed that BiME₂ is as reactive as initiator as Sn‐octanoate and more reactive than Bi‐hexanoate. The difference to BiHex₃ decreased at higher temperatures and upon addition of an alcohol as coinitiator. When tetra(ethylene glycol) was used as coinitiator, it was completely incorporated into the poly(εCL) chain, so that telechelic polylactones having two OH‐endgroups were formed. In the absence of a coinitiator, 2‐mercaptoethanol or its disulfide were incorporated in the form of ester groups. Furthermore, it was found by MALDI‐TOF mass spectrometry that small amounts of cyclic oligolactones (detected up to a degree of polymerization of 17) were formed under all reaction conditions. Higher temperatures and longer times favored a higher content of cycles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3175–3183, 2006     

Heterograft copolymers of poly(ε‐caprolactone) prepared by combination of ATRA “grafting onto” and ATRP “grafting from” processes

This paper aims at reporting on the synthesis of a heterograft copolymer by combining the “grafting onto” process based on atom transfer radical addition (ATRA) and the “grafting from” process by atom transfer radical polymerization (ATRP). The statistical copolymerization of ε‐caprolactone (εCL) and α‐chloro‐ε‐caprolactone (αClεCL) was initiated by 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP), followed by ATRA of parts of the chlorinated units of poly(αClεCL‐co‐εCL) on the terminal double bond of α‐MeO,ω‐CH₂?CH? CH₂? CO₂‐poly(ethylene oxide) (PEO). The amphiphilic poly(εCL‐g‐EO) graft copolymer collected at this stage forms micelles as supported by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The unreacted pendant chloro groups of poly(εCL‐g‐EO) were used to initiate the ATRP of styrene with formation of copolymer with two populations of randomly distributed grafts, that is PEO and polystyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6015–6024, 2006     

Ring‐expansion polymerization of meso‐lactide catalyzed by dibutyltin derivatives

Meso‐Lactide was polymerized in bulk at 60, 80, and 100 °C by means of three different types of catalysts: dibutyltin sulfides (2,2‐dibutyl‐2‐stanna‐1,3‐dithiolane and 2,2′‐dibutyl‐2‐stanna‐1,3‐dithiane), dibutyltin derivatives of substituted catechols (BuCa, CyCa, and BzCa), and dibutyltin derivatives of 2,2′dihydroxybiphenyl (SnBi) and 2,2′‐dihydroxy‐1,1′‐binaphthyl (SnNa). Only the latter two catalysts were active at 60 °C. The architecture of the resulting polylactides depends very much on the structure of the catalyst and on the temperature. At the lowest temperature (60 °C), SnBi and SnNa mainly yielded even‐numbered linear chains, but SnNa also yielded even‐numbered cycles at 100 °C and short reaction times. In contrast, BuCa, CyCa, and BzCa mainly yielded odd‐numbered cycles, although the same catalysts yielded even‐numbered linear chains when benzylalcohol was added. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 749–759     

Preparation and characterization of biodegradable poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone) copolymers

A series of poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone) copolymers were prepared with varying feed rations by using two step polymerization reactions. Poly(trimethylenecarbonate)(ε‐caprolactone) random copolymer was synthesized with stannous‐2‐ethylhexanoate and followed by adding p‐dioxanone monomer as the other block. The ring opening polymerization was carried out at high temperature and long reaction time to get high molecular weight polymers. The monofilament fibers were obtained using conventional melting spun methods. The copolymers were identified by ¹H and ¹³C NMR spectroscopy and gel permeation chromatography (GPC). The physicochemical properties, such as viscosity, molecular weight, melting point, glass transition temperature, and crystallinity, were studied. The hydrolytic degradation of copolymers was studied in a phosphate buffer solution, pH = 7.2, 37 °C, and a biological absorbable test was performed in rats. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2790–2799, 2005     

Synthesis and characterization of mid‐ and end‐chain functional telechelics by controlled polymerization methods and coupling processes

Well‐defined polystyrene‐ (PSt) or poly(ε‐caprolactone) (PCL)‐based polymers containing mid‐ or end‐chain 2,5 or 3,5‐ dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP) or ring opening polymerization (ROP). 1,4‐Dibromo‐2‐(bromomethyl)benzene, 1,3‐dibromo‐5‐(bromomethyl)benzene, and 1,4‐dibromo‐2,5‐di(bromomethyl)benzene were used as initiators in ATRP of styrene (St) in conjunction with CuBr/2,2′‐bipyridine as catalyst. 2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene initiated the ROP of ε‐caprolactone (CL) in the presence of stannous octoate (Sn(Oct)₂) catalyst. The reaction of these polymers with amino‐ or aldehyde‐functionalized monoboronic acids, in Suzuki‐type couplings, afforded the corresponding telechelics. Further functionalization with oxidable groups such as 2‐pyrrolyl or 1‐naphthyl was attained by condensation reactions of the amino or aldehyde groups with low molecular weight aldehydes or amines, respectively, with the formation of azomethine linkages. Preliminary attempts for the synthesis of fully conjugated poly(Schiff base) with polymeric segments as substituents, by oxidative polymerization of the macromonomers, are presented. All the starting, intermediate, or final polymers were structurally analyzed by spectral methods (¹H NMR, ¹³C NMR, and IR). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 727–743, 2006     

Concentration effects in the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline in N,N‐dimethylacetamide

The monomer concentration for the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline in N,N‐dimethylacetamide was optimized utilizing high‐throughput experimentation methods. Detailed ¹H‐NMR spectroscopic investigations were performed to understand the mechanistic aspects of the observed concentration effects. Finally, the improved polymerization concentration was applied for the synthesis of higher molecular weight (> 10,000 Da) poly(2‐ethyl‐2‐oxazoline)s. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1487–1497, 2005     

Polylactones, 56. ABA Triblock Copolymers Derived from ε‐Caprolactone or L‐Lactide and a Central Polysiloxane Block

A commercial oligosiloxane having two γ‐hydroxypropyl endgroups and a number‐average molecular weight (M̄_n) around 1 000 Da was condensed with Bu₂Sn(OMe)₂ yielding tin‐containing macrocycles but no polymers. These macrocycles reacted with γ‐thiobutyrolactone by insertion of one thiolactone per Sn—O bond. When ε‐caprolactone was added a ring‐expansion polymerization was initiated, so that the M̄_n could be controlled via the monomer/initiator (M/I) ratio. Triblock copolymers with free OH endgroups were obtained by removal of the Bu₂Sn group from the cyclic polymers with 1,2‐dimercaptoethane or methanol. Analogous cyclic and linear triblockcopolymers were prepared from L ‐lactide.     

Greenish‐yellow‐, yellow‐, and orange‐light‐emitting iridium(III) polypyridyl complexes with poly(ε‐caprolactone)–bipyridine macroligands

A set of novel greenish‐yellow‐, yellow‐, and orange‐light‐emitting polymeric iridium(III) complexes were synthesized with the bridge‐splitting method. The respective dimeric precursor complexes, [Ir(ppy)₂‐μ‐Cl]₂ (ppy = 2‐phenylpyridine) and [Ir(ppy? CHO)₂‐μ‐Cl]₂ [ppy? CHO = 4‐(2‐pyridyl)benzaldehyde], were coordinated to 2,2′‐bipyridine carrying poly(ε‐caprolactone) tails. The resulting emissive polymers were characterized with one‐dimensional (¹H) and two‐dimensional (¹H? ¹H correlation spectroscopy) nuclear magnetic resonance and infrared spectroscopy, gel permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and the successful coordination of the iridium(III) centers to the 2,2′‐bipyridine macroligand was revealed. The thermal behavior was studied with differential scanning calorimetry and correlated with atomic force microscopy. Furthermore, the quantitative coordination was verified by both the photophysical and electrochemical properties of the mononuclear iridium(III) compounds. The photoluminescence spectra showed strong emissions at 535 and 570 nm. The color shifts depended on the substituents of the cyclometallating ligands. Cyclic voltammetry gave oxidation potentials of 1.23 V and 1.46 V. Upon the excitation of the films at 365 nm, yellow light was observed, and this could allow potential applications in light‐emitting devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2765–2776, 2005     

Cyclic poly(ε‐caprolactone) synthesized by combination of ring‐opening polymerization with ring‐closing metathesis,ring closing enyne metathesis,or “click” reaction

This article described the synthesis of cyclic poly(ε‐caprolactone) (PCL) via ring‐closing metathesis (RCM), ring closing enyne metathesis (RCEM), and “click” reaction of different difunctional linear PCL. Linear PCL precursors were prepared by ring‐opening polymerization (ROP) of ε‐caprolactone in bulk using 10‐undecen‐1‐ol or propargyl alcohol as the initiator, followed by reacting with corresponding acyl chloride containing vinyl or azido end group. The subsequent end‐to‐end intramolecular coupling reactions were performed under high dilution conditions. The successful transformation of linear PCL precursor to cyclic PCL was confirmed by Gel permeation chromatography, ¹H NMR, and Fourier transform infrared measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3022–3033, 2009     

Copolymerization of poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) with designed molecular structure by a solid‐state polymerization method

Poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) (PVA‐g‐PPDO) with designed molecular structure was synthesized by a solid‐state polymerization. The solid‐state copolymerization was preceded by a graft copolymerization of PDO initiated with PVA as a multifunctional initiator, and Sn (Oct)₂ as a coininitiator/catalyst in a homogeneous molten state. The polymerization temperature was then decreased and the copolymerization was carried out in a solid state. The products prepared by solid‐state polymerization were characterized by ¹H NMR and DSC, and were compared with those synthesized in the homogeneous molten state. The degree of polymerization (D_p), degree of substitution (D_s), yield and the average molecular weight of the graft copolymer with different molecular structure were calculated from the ¹H NMR spectra. The results show that the crystallization process during the solid‐state polymerization may suppress the undesirable inter‐ or intramolecular side reactions, then resulting in a controlled molecular structure of PVA‐g‐PPDO. The results of DSC measurement show that the molecular structures determine the thermal behavior of the PVA‐g‐PPDO. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3083–3091, 2006     

The synthesis of poly[6,8‐dioxabicyclo[3.2.1]octane‐b‐(ethylene glycol)‐b‐6,8‐dioxabicyclo[3.2.1]octane] by controlled cationic ring‐opening polymerization

The triblock copolymer poly[6,8‐dioxabicyclo[3.2.1]octane‐b‐(ethylene glycol)‐b‐6,8‐dioxabicyclo[3.2.1]octane] was prepared by the controlled cationic ring‐opening polymerization of 6,8‐dioxabicyclo[3.2.1]octane (6,8‐DBO) from a macroinitiator. The macroinitiator, poly(ethylene glycol) (PEG) di(1‐chloroethyl ether), was prepared via the addition of HCl to PEG divinyl ether and was characterized with ¹³C NMR, ¹H NMR, and gel permeation chromatography (GPC). Upon preparation, a small fraction of the chain ends underwent a cyclization reaction to form inactive chain ends. When the macroinitiator was used in polymerizations of 6,8‐DBO with ZnI₂ as an activator, linear kinetic plots were observed, a linear increase in the copolymer molecular weight with conversion was seen, and the molecular weight distributions of the copolymer samples remained constant at about 1.40. Confirmation of the triblock structure of the final product was obtained with ¹H NMR spectra, ¹³C DEPT spectra, and GPC chromatograms. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4081–4087, 2000     

Synthesis,characterization, and thermal properties of a novel pentaerythritol‐initiated star‐shaped poly(p‐dioxanone)

A novel star‐shaped poly(p‐dioxanone) was synthesized by the ring‐opening polymerization of p‐dioxanone initiated by pentaerythritol with stannous octoate as a catalyst in bulk. The effect of the molar ratio of the monomer to the initiator on the polymerization was studied. The polymers were characterized with ¹H NMR and ¹³C NMR spectroscopy. The thermal properties of the polymers were investigated with differential scanning calorimetry and thermogravimetric analysis. The novel star‐shaped poly(p‐dioxanone) has a potential use in biomedical materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1245–1251, 2006     

Investigation of Mizoroki‐Heck coupling polymerization as a catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Mizoroki‐Heck coupling polymerization of 1,4‐bis[(2‐ethylhexyl)oxy]‐2‐iodo‐5‐vinylbenzene ( 1 ) and its bromo counterpart 2 with a Pd initiator for the synthesis of poly(phenylenevinylene) (PPV) was investigated to see whether the polymerization proceeds in a chain‐growth polymerization manner. The polymerization of 1 with ^tBu₃PPd(Tolyl)Br ( 10 ) proceeded even at room temperature when 5.5 equiv of Cy₂NMe (Cy = cyclohexyl) was used as a base, but the molecular weight distribution of PPV was broad. The polymerization of 2 hardly proceeded at room temperature under the same conditions. In the polymerization of 1 , PPV with H at one end and I at the other was formed until the middle stage, and the polymer end groups were converted into tolyl and H in the final stage. The number‐average molecular weight (M_n) did not increase until about 90% monomer conversion and then sharply increased after that, indicating conventional step‐growth polymerization. The occurrence of step‐growth polymerization, not catalyst‐transfer chain‐growth polymerization, may be interpreted in terms of low coordination ability of H‐Pd(II)‐X(^tBu₃P) (X = Br or I), formed in the catalytic cycle of the Mizoroki‐Heck coupling reaction, to π‐electrons of the PPV backbone; reductive elimination of H‐X from this Pd species with base would take place after diffusion into the reaction mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 543–551     

Synthesis and characterization of amphiphilic copolymer of linear poly(ethylene oxide) linked with [poly(styrene‐co‐2‐hydroxyethyl methacrylate)‐graft‐poly(ε‐caprolactone)] using sequential controlled polymerization

A well‐defined amphiphilic copolymer of ‐poly(ethylene oxide) (PEO) linked with comb‐shaped [poly(styrene‐co‐2‐hydeoxyethyl methacrylate)‐graft‐poly(ε‐caprolactone)] (PEO‐b‐P(St‐co‐HEMA)‐g‐PCL) was successfully synthesized by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with ring‐opening anionic polymerization and coordination–insertion ring‐opening polymerization (ROP). The α‐methoxy poly(ethylene oxide) (mPEO) with ω,3‐benzylsulfanylthiocarbonylsufanylpropionic acid (BSPA) end group (mPEO‐BSPA) was prepared by the reaction of mPEO with 3‐benzylsulfanylthiocarbonylsufanyl propionic acid chloride (BSPAC), and the reaction efficiency was close to 100%; then the mPEO‐BSPA was used as a macro‐RAFT agent for the copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) using 2,2‐azobisisobutyronitrile as initiator. The molecular weight of copolymer PEO‐b‐P(St‐co‐HEMA) increased with the monomer conversion, but the molecular weight distribution was a little wide. The influence of molecular weight of macro‐RAFT agent on the polymerization procedure was discussed. The ROP of ε‐caprolactone was then completed by initiation of hydroxyl groups of the PEO‐b‐P(St‐co‐HEMA) precursors in the presence of stannous octoate (Sn(Oct)₂). Thus, the amphiphilic copolymer of linear PEO linked with comb‐like P(St‐co‐HEMA)‐g‐PCL was obtained. The final and intermediate products were characterized in detail by NMR, GPC, and UV. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 467–476, 2006     

Novel synthesis of biodegradable star poly(ethylene glycol)‐block‐poly(lactide) copolymers

Biodegradable star‐shaped poly(ethylene glycol)‐block‐poly(lactide) copolymers were synthesized by ring‐opening polymerization of lactide, using star poly(ethylene glycol) as an initiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature. Two series of three‐ and four‐armed PEG‐PLA copolymers were synthesized and characterized by gel permeation chromatography (GPC) as well as ¹H and ¹³C NMR spectroscopy. The polymerization under the used conditions is very fast, yielding copolymers of controlled molecular weight and tailored molecular architecture. The chemical structure of the copolymers investigated by ¹H and ¹³C NMR indicates the formation of block copolymers. The monomodal profile of molecular weight distribution by GPC provided further evidence of controlled and defined star‐shaped copolymers as well as the absence of cyclic oligomeric species. The effects of copolymer composition and lactide stereochemistry on the physical properties were investigated by GPC and differential scanning calorimetry. For the same PLA chain length, the materials obtained in the case of linear copolymers are more viscous, whereas in the case of star copolymer, solid materials are obtained with reduction in their T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3966–3974, 2007     

Polylactones. LVIII. Star‐shaped polylactones with functional end groups via ring‐expansion polymerization with a spiroinitiator

Two more or less ethoxylated pentaerythritols were reacted with dibutyltin dimethoxide and yielded spirocyclic tin alkoxides that were soluble in hot toluene or in chlorobenzene, chloroform, and 1,1,2,2‐tetrachloroethane at room temperature. These solutions were used in situ as initiators for the ring‐expansion polymerization of ?‐caprolactone or β‐D,L ‐butyrolactone. The spirocyclic polylactones were reacted with various carboxylic acid chlorides and yielded four‐armed stars with the elimination of Bu₂SnCl₂. By variation of the acid chlorides, star arms with chloroacetate, 4‐bromobenzoate, 4‐nitrobenzoate, cinnamate, stearate, or methacrylate end groups were obtained. With 4‐chlorothiophenyl esters of N‐protected amino acids, N‐protected aminoacyl end groups were introduced. A complete functionalization of all star arms was not achieved in all cases, and structure–property relationships were examined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1047–1057, 2002     

Magnesium complexes incorporated by sulfonate phenoxide ligands as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and trimethylene carbonate

Two novel sulfonate phenol ligands—3,3′‐di‐tert‐butyl‐2′‐hydroxy‐5,5′,6,6′‐tetramethyl‐biphenyl‐2‐yl 4‐X‐benzenesulfonate (X?CF₃, L^CF3 ‐H, and X?OCH₃, L^OMe ‐H)—were prepared through the sulfonylation of 3,3′‐di‐tert‐butyl‐5,5′,6,6′‐tetramethylbiphenyl‐2,2′‐diol with the corresponding 4‐substituted benzenesulfonyl chloride (1 equiv.) in the presence of excess triethylamine. Magnesium (Mg) complexes supported by sulfonate phenoxide ligands were synthesized and characterized structurally. The reaction of MgⁿBu₂ with L‐H (2 equiv.) produces the four‐coordinated monomeric complexes ( L^CF3 )₂Mg ( 1 ) and ( L^OMe )₂Mg ( 2 ). Complexes 1 and 2 are efficient catalysts for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) and trimethylene carbonate (TMC) in the presence of 9‐anthracenemethanol; complex 1 catalyzes the polymerization of ε‐CL and TMC in a controlled manner, yielding polymers with the expected molecular weights and narrow polydispersity indices (PDIs). In ε‐CL polymerization, the activity of complex 1 is greater than that of complex 2 , likely because of the greater Lewis acidity of Mg²⁺ metal caused by the electron‐withdrawing substitute trifluoromethyl (? CF₃) at the 4‐position of the benzenesulfonate group. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3564–3572, 2010     

New aliphatic poly(ester‐carbonates) based on 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one

The synthesis, characterization, and ring‐opening polymerization of a new cyclic carbonate monomer containing an allyl ester moiety, 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC), was performed for the first time. MAC was synthesized in five steps in good yield beginning from the starting material, 2,2‐bis(hydroxymethyl)propionic acid. Subsequent polymerization and copolymerizations of the new cyclic carbonate with rac‐lactide (rac‐LA) and ?‐caprolactone (CL) were attempted. Rac‐LA copolymerized well with MAC, but CL copolymerizations produced insoluble products. Oligomeric macroinitiators of MAC and rac‐LA were synthesized from stannous ethoxide, and both macroinitiators were used for the controlled ring‐opening polymerization of rac‐LA. The polymerization kinetics were examined by monitoring the disappearance of the characteristic C? O ring stretch of the monomer at 1240 cm^?1 with real‐time in situ Fourier transform infrared spectroscopy. Postpolymerization oxidation reactions were conducted to epoxidize the unsaturated bonds of the MAC‐functionalized polymers. Epoxide‐containing polymers may allow further organic transformations with various nucleophiles, such as amines, alcohols, and carboxylic acids. NMR was used for microstructure identification of the polymers, and size exclusion chromatography and differential scanning calorimetry were used to characterize the new functionalized poly(ester‐carbonates). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1978–1991, 2003     

Synthesis,self‐assembly and drug‐loading capacity of well‐defined drug‐conjugated amphiphilic A2B2 type miktoarm star copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol)

Well‐defined drug‐conjugated amphiphilic A₂B₂ miktoarm star copolymers [(PCL)₂‐(PEG)₂‐D] were prepared by the combination of controlled ring‐opening polymerization (CROP) and “click” reaction strategy. First, bromide functionalized poly(ε‐caprolactone) (PCL‐Br) with double hydroxyl end groups was synthesized by the CROP of ε‐caprolactone using 2,2‐bis(bromomethyl)propane‐1,3‐diol as a difunctional initiator in the presence of Sn(Oct)₂ at 110 °C. Next, the bromide groups of PCL‐Br were quantitatively converted to azide form by NaN₃ to give PCL‐N₃. Subsequently, the end hydroxyl groups of PCL‐N₃ were capped with ibuprofen as a model drug at room temperature. Finally, copper(I)‐catalyzed cycloaddition reaction between ibuprofen‐conjugated PCL‐N₃ and slightly excess alkyne‐terminated poly(ethylene glycol) (A‐PEG) led to ibuprofen‐conjugated A₂B₂ miktoarm star copolymer [(PCL)₂‐(PEG)₂‐D]. The excess A‐PEG was removed by dialysis. ¹H NMR, FTIR and SEC analyzes confirmed the expected miktoarm star architecture. These amphiphilic miktoarm star copolymers could self‐assemble into multimorphological aggregates in aqueous solution, which were characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). In addition, the drug‐loading capacity of these drug‐conjugated miktoarm star copolymers as well as their nondrug‐conjugated analogs were also investigated in detail. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009