Synthesis and characterization of rigid functional anionic polyelectrolytes: Block copolymers and star homopolymers

Seven cyclolinear polymers bearing the tertiary‐butyl α‐(hydroxymethyl)acrylate (TBHMA) ether dimer were prepared using reversible addition–fragmentation chain transfer (RAFT) polymerization. Of the seven polymers, five were cyclolinear homopolymers of the TBHMA ether dimer with different degrees of polymerization, one was an “arm‐first” star homopolymer, and the other was an amphiphilic linear copolymer based on the positively ionizable hydrophilic 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and the TBHMA ether dimer. For comparison, two more polymers were prepared using RAFT polymerization where the TBHMA ether dimer was replaced by tertiary‐butyl methacrylate (tBuMA). In particular, an amphiphilic linear DMAEMA–tBuMA diblock copolymer and a tBuMA arm‐first star homopolymer were also synthesized. All polymers were characterized in terms of their molecular weights and composition using gel permeation chromatography and ¹H NMR spectroscopy, respectively. Subsequently, the tertiary‐butyl groups of the TBHMA ether dimer units and those of the tBuMA units were cleaved by hydrolysis to yield carboxylic acid groups. The successful removal of the tertiary‐butyl groups was confirmed using ¹H and ¹³C NMR and attenuated total reflectance‐Fourier transform infrared spectroscopies. The hydrolyzed (co)polymers exhibited pK values of the carboxylic acid groups of around 4.5, and glass transition temperatures, T_g, of around 200 °C, which were 50 °C higher than those of their nonhydrolyzed precursors. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Microstructure determination of methyl methacrylate and n‐butyl acrylate copolymers synthesized by atom transfer radical polymerization with two‐dimensional NMR spectroscopy

Copolymers of methyl methacrylate (MMA) and n‐butyl acrylate (n‐BA) were synthesized under atom transfer radical polymerization (ATRP) conditions. The molar infeed ratio was varied to obtain copolymers with different compositions. Methyl 2‐bromo propionate was used as the initiator with CuBr/Cu(0)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst at 60 °C. Molecular weight distribution was determined by gel permeation chromatography (GPC). Copolymer compositions (F_M) were calculated from ¹H NMR spectra. Reactivity ratios calculated with the Mao–Huglin terminal model at a high conversion were found to be r_M = 2.17 and r_B = 0.47. The polymerization mechanism was studied with the α‐methyl region of MMA. The backbone methylene and carbonyl carbons of both MMA and n‐BA units were found to be compositionally as well as configurationally sensitive. Complete spectral assignments were performed with the help of heteronuclear single quantum coherence (HSQC) spectroscopy along with total correlated spectroscopy (TOCSY). Further, the assignments of the carbonyl region were made with the help of heteronuclear multiple quantum coherence (HMBC) spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1100–1118, 2005     

From the N‐Heterocyclic Carbene‐Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates

Among various N‐heterocyclic carbenes (NHCs) tested, only 1,3‐bis(tert‐butyl)imidazol‐2‐ylidene (NHC^tBu) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC‐catalyzed 1,4‐addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well‐defined α‐alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]₀/[ROH]₀ molar ratio, were ultimately obtained in N,N‐dimethylformamide at 25 °C. A hydroxyl‐terminated poly(ethylene oxide) (PEO‐OH) macro‐initiator was also employed to directly access PEO‐b‐PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC^tBu.     

Free-radical homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate in tetrahydrofuran

Ethyl α-hydroxymethylacrylate (EHMA) was polymerized in a 3 mol/L tetrahydrofuran solution at 50°C, using 2–2' azobisisobutyronitrile as initiator. The kinetic behavior indicates a higher polymerization rate for EHMA than for methyl methacrylate (MMA). Copolymerization reaction between MMA and EHMA, under the same experimental conditions, was carried out and values of r_MMA = 1.264 and r_EHMA = 1.285 were found for the reactivity ratios. The comparison of triad sequences as determined from Bernouillian statistic to those calculated from the experimental spliting of O-methyl and α-methyl ¹H-NMR signals of the copolymers confirm the obtained results. © 1992 John Wiley & Sons, Inc.     

Poly(acrylate‐b‐styrene‐b‐isobutylene‐b‐styrene‐b‐acrylate) Block Copolymers via Carbocationic and Atom Transfer Radical Polymerizations

A series of polyacrylate‐polystyrene‐polyisobutylene‐polystyrene‐polyacrylate (X‐PS‐PIB‐PS‐X) pentablock terpolymers (X=poly(methyl acrylate) (PMA), poly(butyl acrylate) (PBA), or poly(methyl methacrylate) (PMMA)) was prepared from poly (styrene‐b‐isobutylene‐b‐styrene) (PS‐PIB‐PS) block copolymers (BCPs) using either a Cu(I)Cl/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. The PS‐PIB‐PS BCPs were prepared by quasiliving carbocationic polymerization of isobutylene using a difunctional initiator, followed by the sequential addition of styrene, and were used as macroinitiators for the atom transfer radical polymerization (ATRP) of methyl acrylate (MA), n‐butyl acrylate (BA), or methyl methacrylate (MMA). The ATRP of MA and BA proceeded in a controlled fashion using either a Cu(I)Cl/PMDETA or Cu(I)Cl/Me₆TREN catalyst system, as evidenced by a linear increase in molecular weight with conversion and low PDIs. The polymerization of MMA was less controlled. ¹H‐NMR spectroscopy was used to elucidate pentablock copolymer structure and composition. The thermal stabilities of the pentablock copolymers were slightly less than the PS‐PIB‐PS macroinitiators due to the presence of polyacrylate or polymethacrylate outer block segments. DSC analysis of the pentablock copolymers showed a plurality of glass transition temperatures, indicating a phase separated material.     

Controlled/living polymerization of methyl methacrylate using new sterically hindered imidazoline nitroxides prepared via intramolecular 1,3‐dipolar cycloaddition reaction

A series of imidazoline nitroxides with bulky spirocyclic moieties at the positions 2 or 5 of imidazole ring were synthesized using intramolecular 1,3‐dipolar cycloaddition in 2H‐imidazole 1‐oxides or 4H‐imidazole 3‐oxides with pent‐4‐enyl groups followed by isoxazolidine ring opening and oxidation. Capability of the nitroxides to control radical polymerization of methyl methacrylate (MMA) and styrene was investigated. For that purpose, alkoxyamines were synthesized from the aforementioned nitroxides and tert‐butyl α‐bromoisobutyrate. Homolysis rate constants of the alkoxyamines were measured and possible contributions of side reactions were quantified. Nitroxide‐mediated polymerization of styrene and MMA was studied using the alkoxyamines as initiators. MMA polymerization was found to proceed in controlled regime up to 55% of monomer conversion and the polymer obtained was able to reinitiate the polymerization of styrene. Quota of “living” chains estimated to reach 90%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 929–943     

Macromonomer synthesis using α‐(2‐methyl‐2‐phenylpropyl)acrylates as addition–fragmentation chain‐transfer agents expelling the cumyl radical

α‐(2‐Methyl‐2‐phenylpropyl)acrylate (RS‐2) was examined as a C? C bond‐cleavage type addition–fragmentation chain transfer (AFCT) agent in the benzene solution polymerizations of styrene (St), ethyl methacrylate (EMA), and cyclohexyl acrylate (CHA) with the objective of achieving efficient macromonomer synthesis by radical polymerization. The AFCT efficiency was evaluated in terms of the decrease in the number‐average molecular weight (M_n) upon the addition of the AFCT agent and the number of unsaturated end groups introduced per chain (f). The AFCT efficiency was rationalized by the consideration of the relative importance of AFCT as an end‐forming event and the competition between ‐fragmentation and crosspropagation as adduct radical reaction pathways. In St and EMA polymerizations at 60 °C, RS‐2 resulted in higher f values and lower M_n values than methyl α‐(2‐methyl‐2‐carbomethoxypropyl)acrylate (MMA‐2), and this suggested the facilitation of ‐fragmentation due to the expulsion of the more stable cumyl radical from the RS‐2 adduct radical. Higher f values were observed for MMA‐2 than for RS‐2 in CHA polymerization because of unsaturated end group formation by ‐fragmentation of midchain radicals. However, RS‐2 resulted in lower M_n values for poly(CHA) than MMA‐2 because of a smaller contribution of crosspropagation. Retardation in the presence of the AFCT agents was affected by the balance between b‐fragmentation and crosspropagation and by the addition rate of the propagating radical to the AFCT agent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6021–6030, 2004     

Effect of Rh(III) and Ru(II) complexes in the polymerization of vinyl monomers initiated by charge transfer mechanism

The initiation of polymerization of vinyl monomers such as methyl methacrylate (MMA) and methyl acrylate (MA) by a charge transfer complex formed between n-butylamine(nBA) and carbon tetrachloride (CCl₄) in dimethylsulfoxide (DMSO) at 30°C is slow. The effect of the dimethylsulfoxide complexes of Rh(III) and Ru(II) on the polymerization of MMA and MA in the presence of nBA, and CCl₄ in DMSO has been studied. The rate of polymerization and percent conversion of the MMA and MA at 30°C are evaluated at the critical concentration of the metal complexes. At the critical range of the metal complex concentrations, both R_p, and percent conversion of MMA and MA were found to be highest. However, above and below the critical concentrations, R_p and percent conversion of the monomers were found to decrease. A suitable mechanism for the polymerization has been proposed.     

Study on soap‐free P(MMA‐EA‐AA or MAA) latex particles with narrow size distribution

Soap‐free poly(methyl methacrylate‐ethyl acrylate‐acrylic acid or methacrylic acid) [P(MMA‐EA‐AA or MAA)] particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and acrylic acid (AA) or methacrylic acid (MAA), and the influences of the mass ratio of core/shell monomers used in the two stages of polymerization ([C/S]_w) and initiator amount on polymerization, particle size and its distribution were investigated by using different monomer addition modes. Results showed that when the batch swelling method was used, the monomer conversion was more than 96.0% and particle size distribution was narrow, and the particle size increased first and then remained almost unchanged at around 600 nm with the [C/S]_w decreased. When the drop‐wise addition method was used, the monomer conversion decreased slightly with [C/S]_w decreased, and large particles more than 750 nm in diameter can be obtained; with the initiator amount increased, the particle size decreased and the monomer conversion had a trend to increase; the particle size distribution was broader and the number of new particles was more in the AA system than in the MAA system; but the AA system was more stable than the MAA system at both low and high initiator amount. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and polymerization of new di‐octadecyl ester derivatives of α‐hydroxymethyl acrylate: A structure‐property correlation for their copolymers with methyl methacrylate

New ether dimer (ED‐Od) and diester (ODE) derivatives of α‐hydroxymethylacrylate, each having two octadecyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature. The free radical polymerizations of both monomers yielded high‐molecular weight polymers. Cyclopolymer formation of ED‐Od was confirmed by ¹³C NMR analysis and the cyclization efficiency (0.95 or greater) was found to be as high as the cyclization efficiencies of the cyclopolymerizations of ether dimers of various alkyl α‐hydroxymethylacrylates synthesized previously. Copolymers of both ED‐Od and ODE with methyl methacrylate (MMA) showed significant T_g decreases over PMMA due to octadecyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of octadecyl methacrylate, ED‐Od and ODE with MMA revealed that the impacts of these monomers on depression of T_g's are identical. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the octadecyl side groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7785–7793, 2008     

Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006     

Grafting of polymer matrix to exfoliated montmorillonite nanoplatelets in nanocomposite film cast from soap‐free emulsion polymerized latex and its fortified mechanical properties

Poly(methyl acrylate‐co‐methyl methacrylate) [P(MA‐co‐MMA)] nanocomposite film containing 1 wt % of montmorillonite (MMT) exhibited unusual higher ductility, higher strain recovery ratio after creep, and higher modulus and strength compared to neat P(MA‐co‐MMA) as they were cast from their individual latices fabricated by soap‐free emulsion polymerization. The fortified mechanical properties were attributed to the MgO components of exfoliated MMT nanoplatelets being grafted by P(MA‐co‐MMA) chains as verified by FTIR and XPS spectroscopies, which to the best of our knowledge is the first time in the literature providing the direct evidence for the polymer chains grafting onto the exfoliated MMT. TEM investigation of the stretched nanocomposite film revealed that the microcracks in the nanocomposite film appeared mainly in the bulk region of polymer matrix, implying that the interfacial strength between P(MA‐co‐MMA) and its grafted MMT nanoplatelets was higher than the cohesion strength of P(MA‐co‐MMA). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5891–5897, 2009     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.     

Stereocontrol in the free‐radical polymerization of methacrylates with fluoroalcohols

The free‐radical polymerization of methyl methacrylate (MMA), ethyl methacrylate (EMA), isopropyl methacrylate (IPMA), and tert‐butyl methacrylate (t‐BuMA) was carried out under various conditions to achieve stereoregulation. In the MMA polymerization, syndiotactic specificity was enhanced by the use of fluoroalcohols, including (CF₃)₃COH as a solvent or an additive. The polymerization of MMA in (CF₃)₃COH at −98 °C achieved the highest syndiotacticity (rr = 93%) for the radical polymerization of methacrylates. Similar effects of fluoroalcohols enhancing syndiotactic specificity were also observed in the polymerization of EMA, whereas the effect was negligible in the IPMA polymerization. In contrast to the polymerizations of MMA and EMA, syndiotactic specificity was decreased by the use of (CF₃)₃COH in the t‐BuMA polymerization. The stereoeffects of fluoroalcohols seemed to be due to the hydrogen‐bonding interaction of the alcohols with monomers and growing species. The interaction was confirmed by NMR measurements. In addition, in the bulk polymerization of MMA at −78 °C, syndiotactic specificity and polymer yield increased even in the presence of a small amount {[(CF₃)₃COH]/[MMA]_o < 1} of (CF₃)₃COH. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4693–4703, 2000     

Synthesis of poly(β‐pinene)‐g‐poly(meth)acrylate by the combination of living cationic polymerization and atom transfer radical polymerization

New graft copolymers of β‐pinene with methyl methacrylate (MMA) or butyl acrylate (BA) were synthesized by the combination of living cationic polymerization and atom transfer radical polymerization (ATRP). β‐Pinene polymers with predetermined molecular weights and narrow molecular weight distributions (MWDs) were prepared by living cationic polymerization with the 1‐phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, and the resultant polymers were brominated quantitatively by N‐bromosuccinamide in the presence of azobisisobutyronitrile, yielding poly(β‐pinene) macroinitiators with different bromine contents (Br/β‐pinene unit molar ratio = 1.0 and 0.5 for macroinitiators a and b , respectively). The macroinitiators, in conjunction with CuBr and 2,2′‐bipyridine, were used to initiate ATRP of BA or MMA. With macroinitiator a or b , the bulk polymerization of BA induced a linear first‐order kinetic plot and gave graft copolymers with controlled molecular weights and MWDs; this indicated the living nature of these polymerizations. The bulk polymerization of MMA initiated with macroinitiator a was completed instantaneously and induced insoluble gel products. However, the controlled polymerization of MMA was achieved with macroinitiator b in toluene and resulted in the desired graft copolymers with controlled molecular weights and MWDs. The structures of the obtained graft copolymers of β‐pinene with (methyl)methacrylate were confirmed by ¹H NMR spectra. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1237–1242, 2003     

Propagation kinetics of free‐radical polymerizations in ionic liquids

Propagation rate coefficients, k_p, of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) homopolymerizations were measured at ambient pressure in four ionic liquids (ILs): 1‐ethyl‐3‐methylimidazolium ([emim]) ethyl sulfate and [emim] hexyl sulfate as well as butyl‐3‐methylimidazolium ([bmim]) hexafluorophosphate and [bmim] tetrafluoroborate via the pulsed‐laser polymerization size‐exclusion chromatography technique. In passing from bulk polymerization at 40 °C polymerization in IL solution containing 20 vol % monomer, k_p is enhanced by up to a factor of 4 with MMA and by a factor of 2 with GMA. This enhancement of k_p primarily results from a lowering of activation energy upon partial replacement of monomer by ionic liquid species. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1460–1469, 2008     

Synthesis and characterization of amphiphilic heterograft copolymers with PAA and PS side chains via “Grafting from” approach

The amphiphilic heterograft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐(poly(acrylic acid)/polystyrene) (P(MMA‐co‐BIEM)‐g‐(PAA/PS)) were synthesized successfully by the combination of single electron transfer‐living radical polymerization (SET‐LRP), single electron transfer‐nitroxide radical coupling (SET‐NRC), atom transfer radical polymerization (ATRP), and nitroxide‐mediated polymerization (NMP) via the “grafting from” approach. First, the linear polymer backbones poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate) (P(MMA‐co‐BIEM)) were prepared by ATRP of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) and subsequent esterification of the hydroxyl groups of the HEMA units with 2‐bromoisobutyryl bromide. Then the graft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐poly(t‐butyl acrylate) (P(MMA‐co‐BIEM)‐g‐PtBA) were prepared by SET‐LRP of t‐butyl acrylate (tBA) at room temperature in the presence of 2,2,6,6‐tetramethylpiperidin‐1‐yloxyl (TEMPO), where the capping efficiency of TEMPO was so high that nearly every TEMPO trapped one polymer radicals formed by SET. Finally, the formed alkoxyamines via SET‐NRC in the main chain were used to initiate NMP of styrene and following selectively cleavage of t‐butyl esters of the PtBA side chains afforded the amphiphilic heterograft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐(poly(t‐butyl acrylate)/polystyrene) (P(MMA‐co–BIEM)‐g‐(PtBA/PS)). The self‐assembly behaviors of the amphiphilic heterograft copolymers P(MMA‐co–BIEM)‐g‐(PAA/PS) in aqueous solution were investigated by AFM and DLS, and the results demonstrated that the morphologies of the formed micelles were dependent on the grafting density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

An Alkenyl Boronate as a Monomer for Radical Polymerizations: Boron as a Guide for Chain Growth and as a Replaceable Side Chain for Post‐Polymerization Transformation

The ability of isopropenyl boronate pinacol ester to serve as a monomer in radical polymerizations was established and exploited for the synthesis of polymers that are difficult to access using other polymerization techniques. Although the monomer exhibits an α‐methyl‐substituted unconjugated structure, which is usually unfavorable for radical propagation, both free and controlled radical polymerizations smoothly afford the corresponding polymers. A density‐functional‐theory‐based investigation revealed that the boron atom moderately stabilizes the radical species, which leads to the suppression of the degradative chain transfer to the α‐methyl groups, and thus guides the reaction towards the radical polymerization. The boronyl pendants, which are directly attached to the polymer backbone, can be replaced with ‐OH or ‐NH₂ to yield poly(α‐methyl vinyl amine) or poly(α‐methyl vinyl alcohol), which has been inaccessible by conventional synthetic methods.     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Neutral Pd(II) and Ni(II) acetylide complexes as single‐component initiators for polymerizations of butyl methacrylate and acrylates

Homogeneous polymerization of butyl methacrylate (BMA) using Pd(II)‐ and Ni(II)‐based acetylide complexes as single‐component initiators has been investigated in CHCl₃ at 60°C. M(PPh₃)₂(C = CR)₂ (M = Pd, Ni; R = Ph, CH₂OH, CH₂OOCCH₃) were found to be a novel type of effective initiators for the polymerization of butyl methacrylate. Among them, Pd(PPh₃)₂(C‐CPh)₂ (PPP) shows the highest activity. Besides, PPP alone can also initiate the homogeneous polymerizations of acrylates, e. g., methyl acrylate (MA), and n‐butyl acrylate (BA). The present type of polymerization is not hindered by the incorporation of hydroquinone.