Computational study of conformations and of sulfinyl oxygen-induced pentacoordination at silicon in 4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide

Second-order Møller-Plesset theory (MP2) and density functional theory (B3LYP) with the 6-311G(d,p) and 6-311+G(d,p) basis sets have been used to calculate the equilibrium geometries and relative energies of the chair, twist, and boat conformations of 4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide. The chair conformers of the axial sulfoxides are lower in energy than the chair conformers of the corresponding equatorial sulfoxides. MP2/6-311+G(d,p) predicted the chair conformer of axial trans-4-chloro-4-silathiacyclohexane 1-oxide (4a) to be 6.12, 0.44, and 0.45 kcal/mol, respectively, more stable than the corresponding 1,4-twist (4b), 2,5-twist (4c) and 1,4-boat (4d) conformers and 6.93 kcal/mol more stable than the 2,5-boat transition state ([4e]^‡). Structures 4c and 4d are stabilized by intramolecular coordination of the sulfinyl oxygen with silicon that results in trigonal bipyramidal geometry at silicon. The 1,4-boat conformer (7d) of axial 4,4-dichloro-4-silathiacyclohexane 1-oxide is also stabilized by transannular coordination of the sulfinyl oxygen with silicon. The energy difference (E_rel = 4.23 kcal/mol) between the chair conformer (7a) and 7d is larger than that between 4a and 4d. The relatively lower stability of the 1,4-boat conformer (7d) of axial 4,4-dichloro-4-silathiacyclohexane 1-oxide (7a) may be due to repulsive interactions of the axial halogen and sulfinyl oxygen atoms. The relative energies and structures of the conformers and transition states of cis- and trans-4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide are discussed in terms of hyperconjugative interactions, orbital interactions, nonbonded interactions, and intramolecular sulfinyl oxygen-silicon coordination.     

Computational study of 4‐fluoro‐4‐chloro‐ and 4‐fluoro‐4‐bromo‐4‐silathiacyclohexane S‐oxides: Effect of halogen on the SO→Si intramolecular coordination in the boat and twist conformers

Chair, twist, and boat conformations of axial and equatorial 4‐fluoro‐4‐chloro‐ and 4‐fluoro‐4‐bromo‐4‐silathiacyclohexane S‐oxides have been calculated at the second‐order Møller–Plesset (MP2) and density functional theory (DFT) levels of theory. The 2,5‐twist and 1,4‐boat conformers of the axial sulfoxides are stabilized by transannular interaction between the sulfinyl oxygen and silicon to give trigonal bipyramidal geometry at silicon. The stability of conformers containing pentacoordinate silicon is governed by the balance of the transannular sulfinyl oxygen–silicon coordination, nonbonded H…H and O…Hlg_ax interactions, electronegativity of Hlg_ax and nucleofugality of Hlg_eq, and may approach the stability of the lowest‐energy chair conformers. The effect of pentacoordination on the energy and geometry of Si‐halogenated 4‐silathiane S‐oxides is analyzed as a function of the halogen nature and position. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

1H, 13C, 17O NMR and quantum‐chemical study of the stereochemistry of the sulfoxide and sulfone derivatives of 3‐arylidene‐1‐thioflavan‐4‐one epoxides

The oxidation of the trans,cis‐( 2 ) and trans,trans‐epoxides ( 3 ) of differently substituted (Z)‐3‐arylidene‐1‐thioflavan‐4‐ones ( 1 ) with dimethyldioxirane (DMD) yielded the appropriate sulfoxides ( 4, 5 ) and sulfones ( 6, 7 ). The structures were elucidated by the extensive application of one‐ and two‐dimensional ¹H, ¹³C and ¹⁷O NMR spectroscopy. The conformational analysis was achieved by the application of ³J(C,H) coupling constants, NOESY responses and ab initio calculations. The preferred ground‐state conformers (twisted envelope‐A, twisted envelope‐B for 6 and twisted envelope‐A, envelope‐B for 7 ) were obtained as global minima of the theoretical ab initio MO study and also the examination of the ¹⁷O and ¹³C chemical shifts, calculated for the global minima structures of the sulfone isomers by the GIAO method. Analogous results, obtained for the sulfoxide isomers ( 4, 5 ), not only led to the preferred conformers but also gave evidence for the trans arrangement of the 2‐Ph group and the oxygen atom of the S?O group. Chemical shift differences between the isomers, sulfoxides and sulfones were corroborated by ab initio calculations of the anisotropic effects of the oxirane ring and the S?O and SO₂ groups. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis,structure and characterization of two copper(II) supramolecular coordination polymers based on a multifunctional ligand 2‐amino‐4‐sulfobenzoic acid

Copper(II) coordination polymers have attracted considerable interest due to their catalytic, adsorption, luminescence and magnetic properties. The reactions of copper(II) with 2‐amino‐4‐sulfobenzoic acid (H₂asba) in the presence/absence of the auxiliary chelating ligand 1,10‐phenanthroline (phen) under ambient conditions yielded two supramolecular coordination polymers, namely (3‐amino‐4‐carboxybenzene‐1‐sulfonato‐κO¹)bis(1,10‐phenanthroline‐κ²N,N′)copper(II) 3‐amino‐4‐carboxybenzene‐1‐sulfonate monohydrate, [Cu(C₇H₆N₂O₅S)(C₁₂H₈N₂)₂](C₇H₆N₂O₅S)·H₂O, (1), and catena‐poly[[diaquacopper(II)]‐μ‐3‐amino‐4‐carboxylatobenzene‐1‐sulfonato‐κ²O⁴:O^4′], [Cu(C₇H₆N₂O₅S)(H₂O)₂]_n, (2). The products were characterized by FT–IR spectroscopy, thermogravimetric analysis (TGA), solid‐state UV–Vis spectroscopy and single‐crystal X‐ray diffraction analysis, as well as by variable‐temperature powder X‐ray diffraction analysis (VT‐PXRD). Intermolecular π–π stacking interactions in (1) link the mononuclear copper(II) cation units into a supramolecular polymeric chain, which is further extended into a supramolecular double chain through interchain hydrogen bonds. Supramolecular double chains are then extended into a two‐dimensional supramolecular double layer through hydrogen bonds between the lattice Hasba⁻ anions, H₂O molecules and double chains. Left‐ and right‐handed 2₁ helices formed by the Hasba⁻ anions are arranged alternately within the two‐dimensional supramolecular double layers. Complex (2) exhibits a polymeric chain which is further extended into a three‐dimensional supramolecular network through interchain hydrogen bonds. Complex (1) shows a reversible dehydration–rehydration behaviour, while complex (2) shows an irreversible dehydration–rehydration behaviour.     

A Computational Understanding of Solvent Effect on the Structure,Electronic, Thermochemical,and Spectroscopic Properties of Ni(η2‐C6H4)(H2PCH2CH2PH2) Complex

Here we report the density functional calculations of the molecular parameters including the energy, geometries, electric dipole moments, vibrational IR frequencies, and ¹H and ¹³C NMR chemical shifts of Ni(η²‐C₆H₄ )(H₂PCH₂CH₂PH₂ ) (a benzyne complex). Based on the polarizable continuum model (PCM ), the effect of polarity of the solvent on these parameters was explored. The wavenumbers of υ(C1–C2 ) as well as the ¹H and ¹³C NMR chemical shift values of complex in various solvents were calculated and correlated with the Kirkwood–Bauer–Magat equation (KBM ), the solvent acceptor numbers (ANs ), and the linear solvation energy relationship (LSER ). The bonding interaction between the benzyne and Ni(H₂PCH₂CH₂PH₂ ) fragment was analyzed by means of the energy decomposition analysis (EDA ). The character of the Ni–C bonds of the molecules was analyzed by natural bond orbital (NBO ) analysis. Also, Monte Carlo simulations were used for the calculation of the total energy and solvation free energy of the complex in water.     

1‐(7‐Chloro‐1,4‐dihydroquinolin‐4‐ylidene)thiosemicarbazide and its hydrochloride: evidence for the existence of a stable imine tautomer in the solid state of 4‐aminoquinoline free bases,an anomalous case in nitrogen heterocycles

In the solid state, crystals of both 1‐(7‐chloro‐1,4‐dihydroquinolin‐4‐ylidene)thiosemicarbazide–methanol–water (2/1/1), 2C₁₀H₉ClN₄S·CH₃OH·H₂O, (I), and its hydrochloride salt {systematic name: [(7‐chloro‐1,4‐dihydroquinolin‐4‐ylidene)azaniumyl]thiourea chloride}, C₁₀H₁₀ClN₄S⁺·Cl⁻, (II), assume the imine tautomeric form, contrary to other 4‐amino‐7‐chloroquinolines. Of particular interest are the N—C bond lengths, which have appreciable double‐bond character, and the C—N—C aromatic ring bond angle. Both of these parameters have been studied extensively in 4‐amino‐substituted quinolines. The crystal structures of (I) and (II) in this study provide interesting examples of the amino–imino tautomerism which exists in this class of compound and is, to the best of our knowledge, hitherto unreported.     

A novel series of M(II) complexes of 6‐methylpyridine‐2‐carboxylic acid with 4(5)methylimidazole: Synthesis,crystal structures, α‐glucosidase activity,density functional theory calculations and molecular docking

Novel complexes of 6‐methylpyridine‐2‐carboxylic acid and 4(5)methylimidazole, namely [Mn(6‐mpa)₂(4(5)MeI)₂] ( 1 ), [Zn(6‐mpa)₂(4(5)MeI)₂] ( 2 ), [Cd(6‐mpa)₂(4(5)MeI)₂] ( 3 ), [Co(6‐mpa)₂(4(5)MeI)₂] ( 4 ), [Ni(6‐mpa)₂(4(5)MeI)(OAc)] ( 5 ) and [Cu(6‐mpa)₂(4(5)MeI)] ( 6 ), were synthesized for the first time. The structures of complexes 1 – 4 and complexes 5 and 6 were determined using X‐ray diffraction and mass spectrometric techniques, respectively. The experimental spectral analyses for these complexes were performed using Fourier transform infrared and UV–visible techniques. The α‐glucosidase inhibition activity values (IC₅₀) of complexes 1 – 6 were identified in view of genistein reference compound. Moreover, the DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level was used to obtain optimal molecular geometry and vibrational wavenumbers for complexes 1 – 6 . Electronic spectral behaviours and major contributions to the electronic transitions were investigated using TD‐DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level with conductor‐like polarizable continuum model and SWizard program. Finally, in order to investigate interactions between the synthesized complexes ( 1 – 6 ) and target protein (template structure S. cerevisiae isomaltase), a molecular docking study was carried out.     

Crystal structures of the pyrazinamide–p‐aminobenzoic acid (1/1) cocrystal and the transamidation reaction product 4‐(pyrazine‐2‐carboxamido)benzoic acid in the molten state

The synthesis of pharmaceutical cocrystals is a strategy to enhance the performance of active pharmaceutical ingredients (APIs) without affecting their therapeutic efficiency. The 1:1 pharmaceutical cocrystal of the antituberculosis drug pyrazinamide (PZA) and the cocrystal former p‐aminobenzoic acid (p‐ABA), C₇H₇NO₂·C₅H₅N₃O, (1), was synthesized successfully and characterized by relevant solid‐state characterization methods. The cocrystal crystallizes in the monoclinic space group P2₁/n containing one molecule of each component. Both molecules associate via intermolecular O—H...O and N—H...O hydrogen bonds [O...O = 2.6102 (15) Å and O—H...O = 168.3 (19)°; N...O = 2.9259 (18) Å and N—H...O = 167.7 (16)°] to generate a dimeric acid–amide synthon. Neighbouring dimers are linked centrosymmetrically through N—H...O interactions [N...O = 3.1201 (18) Å and N—H...O = 136.9 (14)°] to form a tetrameric assembly supplemented by C—H...N interactions [C...N = 3.5277 (19) Å and C—H...N = 147°]. Linking of these tetrameric assemblies through N—H...O [N...O = 3.3026 (19) Å and N—H...O = 143.1 (17)°], N—H...N [N...N = 3.221 (2) Å and N—H...N = 177.9 (17)°] and C—H...O [C...O = 3.5354 (18) Å and C—H...O = 152°] interactions creates the two‐dimensional packing. Recrystallization of the cocrystals from the molten state revealed the formation of 4‐(pyrazine‐2‐carboxamido)benzoic acid, C₁₂H₉N₃O₃, (2), through a transamidation reaction between PZA and p‐ABA. Carboxamide (2) crystallizes in the triclinic space group P with one molecule in the asymmetric unit. Molecules of (2) form a centrosymmetric dimeric homosynthon through an acid–acid O—H...O hydrogen bond [O...O = 2.666 (3) Å and O—H...O = 178 (4)°]. Neighbouring assemblies are connected centrosymmetrically via a C—H...N interaction [C...N = 3.365 (3) Å and C—H...N = 142°] engaging the pyrazine groups to generate a linear chain. Adjacent chains are connected loosely via C—H...O interactions [C...O = 3.212 (3) Å and C—H...O = 149°] to generate a two‐dimensional sheet structure. Closely associated two‐dimensional sheets in both compounds are stacked via aromatic π‐stacking interactions engaging the pyrazine and benzene rings to create a three‐dimensional multi‐stack structure.     

Four supramolecular isomers of dichloridobis(1,10‐phenanthroline)cobalt(II): synthesis,structure characterization and isomerization

Crystal engineering can be described as the understanding of intermolecular interactions in the context of crystal packing and the utilization of such understanding to design new solids with desired physical and chemical properties. Free‐energy differences between supramolecular isomers are generally small and minor changes in the crystallization conditions may result in the occurrence of new isomers. The study of supramolecular isomerism will help us to understand the mechanism of crystallization, a very central concept of crystal engineering. Two supramolecular isomers of dichloridobis(1,10‐phenanthroline‐κ²N,N′)cobalt(II), [CoCl₂(C₁₂H₈N₂)₂], i.e. (IA) (orthorhombic) and (IB) (monoclinic), and two supramolecular isomers of dichloridobis(1,10‐phenanthroline‐κ²N,N′)cobalt(II) N,N‐dimethylformamide monosolvate, [CoCl₂(C₁₂H₈N₂)₂]·C₃H₇NO, i.e. (IIA) (orthorhombic) and (IIB) (monoclinic), were synthesized in dimethylformamide (DMF) and structurally characterized. Of these, (IA) and (IIA) have been prepared and structurally characterized previously [Li et al. (2007). Acta Cryst. E 63 , m1880–m1880; Cai et al. (2008). Acta Cryst. E 64 , m1328–m1329]. We found that the heating rate is a key factor for the crystallization of (IA) or (IB), while the temperature difference is responsible for the crystallization of (IIA) or (IIB). Based on the crystallization conditions, isomerization behaviour, the KPI (Kitajgorodskij packing index) values and the density data, (IB) and (IIA) are assigned as the thermodynamic and stable kinetic isomers, respectively, while (IA) and (IIB) are assigned as the metastable kinetic products. The 1,10‐phenanthroline (phen) ligands interact with each other through offset face‐to‐face (OFF) π–π stacking in (IB) and (IIB), but by edge‐to‐face (EF) C—H...π interactions in (IA) and (IIA). Meanwhile, the DMF molecules in (IIB) connect to neighbouring [CoCl₂(phen)₂] units through two C—H...Cl hydrogen bonds, whereas there are no obvious interactions between DMF molecules and [CoCl₂(phen)₂] units in (IIA). Since OFF π–π stacking is generally stronger than EF C—H...π interactions for transition‐metal complexes with nitrogen‐containing aromatic ligands, (IIA) is among the uncommon examples that are stable and densely packed but that do not following Etter's intermolecular interaction hierarchy.     

Synthesis,structure and photocatalytic degradation of organic dyes of a copper(II) metal–organic framework (Cu–MOF) with a 4‐coordinated three‐dimensional CdSO4 topology

Metal–organic frameworks (MOFs) have attracted much interest in the fields of gas separation and storage, catalysis synthesis, nonlinear optics, sensors, luminescence, magnetism, photocatalysis gradation and crystal engineering because of their diverse properties and intriguing topologies. A Cu–MOF, namely poly[[(μ₂‐succinato‐κ²O:O′){μ₂‐tris[4‐(1,2,4‐triazol‐1‐yl)phenyl]amine‐κ²N:N′}copper(II)] dihydrate], {[Cu(C₄H₄O₄)(C₂₄H₁₈N₁₀)]·2H₂O}_n or {[Cu(suc)(ttpa)]·2H₂O}_n, (I), was synthesized by the hydrothermal method using tris[4‐(1,2,4‐triazol‐1‐yl)phenyl]amine (ttpa) and succinate (suc^2?), and characterized by IR, powder X‐ray diffraction (PXRD), luminescence, optical band gap and valence band X‐ray photoelectron spectroscopy (VB XPS). Cu–MOF (I) shows a twofold interpenetrating 4‐coordinated three‐dimensional CdSO₄ topology with point symbol {6⁵·8}. It presents good photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB) under visible‐light irradiation. A photocatalytic mechanism was proposed and confirmed.     

Substituent Effect on the Electronic Properties and Nature of the W≡C Bond in trans‐Cl(OC)(H3P)3W(≡C‐para‐C6H4X) (X = H,F, SiH3, CN,NO2, SiMe3, CMe3, NH2, NMe2) Complexes: A Computational Quantum Chemistry Study

In this investigation, we describe substituent effect on the dipole moment, ionization potential, electron affinity, structure, frontier orbitals energy, in the trans‐Cl(OC)(H₃P)₃W(≡C‐para‐C₆H₄X) (X = H, F, SiH₃, CN, NO₂, SiMe₃, CMe₃, NH₂, NMe₂) complexes using MPW1PW91 quantum chemical calculations. The nature of chemical bond between the [Cl(OC)(H₃P)₃W]⁻ and [C‐para‐C₆H₄X]⁺ fragments was illustrated with energy decomposition analysis (EDA). Percentage composition in terms of the defined groups of frontier orbitals for these complexes was inspected to investigate the character in metal–ligand bonds. Quantum theory of atoms in molecules (QTAIM) was used for illustration of metal–ligand bonds in these complexes.