A quinoxaline derivative as a long wavelength photosensitizer for diaryliodonium salts

This article reports the use of a quinoxaline derivative as a photosensitizer for diaryliodonium salt photoinitiators. 2,3‐bis(3,4‐bis(decyloxy)phenyl)‐5,8‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)quinoxaline (DOPEQ), is a highly conjugated compound with strong absorption bands at wavelengths ranging from 300 to 550 nm and is shown to facilitate photoinitiated cationic polymerization of heterocyclic monomers such as oxiranes and oxetanes. The polymerizations are initiated at room temperature by using long wavelength UV light in the presence of diphenyliodonium hexafluorophosphate (Ph₂I⁺PF). The polymerizations are monitored by optical pyrometry (OP). It is also possible to initiate photopolymerizations with ambient solar irradiation in the presence of this photosensitizer dye. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 209–213, 2010     

Dibenzophenazine derivatives as visible photosensitizers for diaryliodonium salts

The use of two dibenzo[a,c]phenazine derivatives, 10,13‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)dibenzo[a,c]phenazine and 10,13‐bis(4‐hexylthiophen‐2‐yl)dibenzo[a,c]phenazine are reported as photosensitizers for diaryliodonium salt photoinitiators. Novel dyes based on the dibenzo[a,c]phenazine skeleton are shown to be efficient in carrying out the cationic photopolymerizations. Representative examples of different types of monomers including epoxide, and vinyl monomers are polymerized in the presence of the photosensitizers and diphenyliodonium hexafluorophosphate (Ph₂I⁺PF). Polymerizations are initiated at room temperature using long wavelength UV and visible light, and monitored by optical pyrometry. The photopolymerization of an epoxide monomer via solar irradiation is also demonstrated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Benzotriazole derivatives as long wavelength photosensitizers for diaryliodonium salt initiators

Two benzotriazole derivative dyes 4,7‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)‐2‐dodecyl‐2H‐benzo[1,2,3]triazole, and 2‐dodecyl‐4,7‐bis(4‐hexylthiophen‐2‐yl)‐2H‐benzo[d][1,2,3]triazole are shown to work as efficient photosensitizers for a diphenyliodonium salt initiator in cationic photopolymerization of epoxide and vinyl monomers. Substituted thienyl groups are attached to benzotriazole backbone to extend conjugation and enhance electron density of the molecules. Thereby, it was possible to initiate polymerizations at room temperature using long wavelength UV and visible light. The progress of photopolymerizations was monitored using optical pyrometry. The photopolymerization of an epoxide monomer using solar irradiation was also demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Redox initiated cationic polymerization: Reduction of diaryliodonium salts by 9‐BBN

Diaryliodonium salts undergo facile reduction by the dialkylborane, 9‐BBN. The combination of these two reagents constitutes a redox couple that can be employed as a convenient and versatile initiator system for the cationic polymerizations of styrenic monomers, vinyl ethers and the ring‐opening polymerizations of cyclic ethers and acetals including; epoxides, oxetanes, tetrahydrofuran, and 1,3,5‐trioxane. The polymerizations of these monomers can be carried out in either neat monomer or under solution conditions. Typically, the redox cationic polymerizations of the above monomers are rapid and exothermic. Optical pyrometry (infrared thermography) was employed as a convenient method with which to monitor and optimize the aforementioned redox initiated cationic polymerizations. Studies of the effects of variations in the structure and concentrations of the diaryliodonium salt and 9‐BBN on the polymerizations of various monomers were carried out. A mechanism for the redox cationic initiation of the polymerizations was proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5639–5651, 2009     

Quasiliving Carbocationic Polymerization. X. Molecular Weight Averages and Polydispersity

In quasiliving polymerizations with reversible chain transfer (QL_0R systems), polymers with narrow molecular weight distribution can be obtained, It has been shown that while in true living systems (L₀₀) R = 1, and in quasiliving systems with irreversible chain transfer (QL₀₁) R = 2 is the limiting value of polydispersity, in QL_0R systems r = 4/3 is the polydispersity to which the distribution of the polymer tends with increasing polymerization time. This limit is independent of the rate of reinitiation; the course of the R vs t curves is, however, determined by the various rate constants.     

Dual photo‐ and thermally initiated cationic polymerization of epoxy monomers

Selective inhibition of the photoinitiated cationic ring‐opening polymerization of epoxides by dialkyl sulfides has provided dual systems that can be “activated” by UV irradiation and then subsequently be polymerized by the application of heat. It is proposed that dialkyl sulfides terminate the initial or growing polyether chains at an early stage to form stable trialkylsulfonium salts. These systems are dormant at room temperature but on thermolysis, the sulfonium salts are capable of reinitiating ring‐opening polymerization. These dual photo‐ and thermal cure systems have potential applications in adhesives, potting resins, and composites. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6750–6764, 2006     

Visible and long‐wavelength photoinitiated cationic polymerization

A new system for efficiently carrying out cationic photopolymerizations with visible and long‐wavelength UV light is described. This system is based on the principle that certain onium salt cationic photoinitiators can be reduced by free radicals produced by the hydrogen abstraction reactions of photoexcited ketones. Thus, when camphorquinone, benzil, 2‐isopropylthioxanthone, and 2‐ethylanthraquinone are irradiated in the presence of a monomer that can serve as a hydrogen donor, the resulting monomer‐bound radical rapidly reduces a diaryliodonium salt or a dialkylphenacylsulfonium salt, and the resulting monomer‐centered cations initiate the polymerizations of epoxides, vinyl ethers, and heterocyclic compounds. Onium salts with high reduction potentials, such as triarylsulfonium salts, do not undergo sensitization by this new system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 343–356, 2001     

The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

Reactivity of oxetane monomers in photoinitiated cationic polymerization

Studies of the onium salt photoinitiated cationic ring‐opening polymerizations of various 3,3‐disubstituted oxetane monomers have been conducted with real‐time infrared spectroscopy and optical pyrometry. The polymerizations of these monomers are typified by an extended induction period that has been attributed to the presence of a long‐lived tertiary oxonium ion intermediate formed by the reaction of the initially formed secondary oxonium ion with the cyclic ether monomer. Because the extended induction period in the photopolymerization of these monomers renders oxetane monomers of limited value for many applications, methods have been sought for its minimization or elimination. Three general methods have been found effective in markedly shortening the induction period: (1) carrying out the photopolymerizations at higher temperatures, (2) copolymerizing with more reactive epoxide monomers, and (3) using free‐radical photoinitiators as synergists. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3205–3220, 2005     

Modification of photoinitiated cationic epoxide polymerizations by sulfides

The addition of sulfides has a marked effect on the rates of onium salt induced photoinitiated cationic ring‐opening polymerizations of epoxide monomers. Various behaviors have been observed that depend on the structure of the sulfide. Dialkyl sulfides strongly inhibit the photopolymerizations of these monomers, whereas diaryl sulfides have a retarding effect on the photopolymerizations. Real‐time infrared spectroscopy and optical pyrometry have been employed as analytical methods to probe the kinetic effects of the addition of a variety of sulfides on cationic epoxide ring‐opening photopolymerizations. A mechanism is proposed that involves the formation of sulfonium salts as intermediates. The observations made in this study have important implications for cationic photopolymerizations in general and for photoinitiated cationic ring‐opening polymerizations of epoxides in particular. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2504–2519, 2005     

Long‐wavelength‐absorbing dialkylphenacylsulfonium salt photoinitiators: Synthesis and photoinduced cationic polymerization

A series of sulfonium salt photoinitiators with the general structure Ar′S⁺CH₃(C₁₂H₂₅)SbF, where Ar′ is phenacyl (I), 2‐indanonyl (II), 4‐methoxyphenacyl (III), 2‐naphthoylmethyl (IV), 1‐anthroylmethyl (V), or 1‐pyrenoylmethyl (VI), were prepared with a novel, simple one‐pot process that involves the reaction of an α‐bromoalkylarylketone (Ar′Br) with the dialkylsulfide (CH₃SC₁₂H₂₅) in the presence of sodium hexafluroantimonate in 2‐butanone at room temperature. The photoreactivity of photoinitiators II–VI were evaluated and compared to the unsubstituted analogue, I, in the polymerization of a variety of epoxide monomers. Real‐time infrared spectroscopy and differential scanning photocalorimetry studies revealed that the indanonyl initiator II is more active than I. However, sulfonium salts IV–VI, which contain polycyclic aromatic structures, are much less effective as cationic photoinitiators. Interestingly, photoinitiator III is either more or less reactive compared to I, depending on the monomer used. Our work also showed that the efficiency of the unsubstituted phenacylsulfonium salt I can be significantly enhanced through the use of photosensitizers. Mechanistic aspects of the photopolymerization studies are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1433–1442, 2000     

Synthesis and study of novel polyol‐bound photosensitizers for cationic UV‐curable systems

Novel cationic intramolecular hydrogen abstraction photosensitizers (IHA‐PSs) based on a proposed intramolecular hydrogen abstraction photosensitization (IHAP) mechanism were synthesized and found to have a pronounced photosensitization effect in cycloaliphatic epoxide based cationic UV‐curable systems using sulfonium salt photoinitiators. A series of polyol‐based photosensitizers were synthesized with naphthalene attached. One photosensitizer, P‐Na, was found to have a more pronounced photosensitization effect in three different formulation systems, as revealed by real‐time Fourier transform infrared and differential photocalorimetry experiments. Such a phenomenon can be explained by a proposed facile IHAP mechanism, which is possible only with the unique molecular structure of P‐Na. The effect of P‐Na was further confirmed by comparison with two non‐polyol‐type photosensitizers. A designed IHA‐PS molecule was synthesized with the proposed principles ofthe IHAP mechanism, and it achieved a photosensitization effect similar to that of P‐Na with a much lower molecular weight and fewer hydroxyl groups per molecule. This further validated the proposed IHAP mechanism. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4435–4449, 2006     

Novel N‐methylbenzothiazolium salts as hardeners for epoxy and acrylate monomers

Novel N‐methylbenzothiazolium salts [N‐methyl‐2‐benzylthiobenzothiazolium, N‐methyl‐2‐(4‐nitrobenzylthio)benzothiazolium, N‐methyl‐2‐(1‐ethoxycarbonylethylthio)benzothiazolium, and N‐methyl‐2‐methylthiobenzothiazolium hexafluoroantimonates] were synthesized by the reaction of the corresponding 2‐substituted benzothiazole with dimethylsulfate, followed by anion exchange with KSbF₆. These benzothiazolium salts cationically polymerized an epoxy monomer by photoirradiation. They also polymerized an acrylate monomer via a photoradical process. The use of aromatic compounds such as 2‐ethyl‐9,10‐dimethoxyanthracene as photosensitizers was effective in enhancing the polymerization. These benzothiazolium salts also served as thermal cationic initiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3828–3837, 2003     

Iron‐catalyzed carbon–sulfur bond formation: Atom‐economic construction of thioethers with diaryliodonium salts

Diaryliodonium salts are characterized by poor atom economy with the formation of one equivalent of an iodoarene as waste. We have developed an atom‐economic iron‐catalyzed protocol for the synthesis of a variety of thioethers with diaryliodonium salts. Not only cyclic diaryliodonium salts but also linear diaryliodonium salts were found to perform well in the reactions.     

Synergistic interaction of epoxides and N‐vinylcarbazole during photoinitiated cationic polymerization

A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Cationic polymerizations of 2‐alkyloxazolines catalyzed by bismuth salts

Acidic bismuth salts, such as BiCl₃, BiBr₃, BiJ₃, and Bi‐triflate catalyzed the ring‐opening polymerization of 2‐methoxazoline (MOZ) in bulk at 100 °C, whereas less acidic salts such as Bi₂O₃ or Bi(III)acetate did not. Bi‐triflate‐catalyzed polymerizations of 2‐ethyloxazoline (EtOZ) were performed with variation of the monomer–catalyst ratio (M/C). It was found that the molecular weights were independent of the M/C ratio. The formation of cationic chain ends and the absence of cycles was proven by reactions of virgin polymerization products with N,N‐dimethyl‐4‐aminopyridine or triphenylphosphine. The resulting polymers having modified cationic chain ends were characterized by ¹H NMR spectroscopy and MALDI‐TOF mass spectrometry. The polymerization mechanism including chain‐transfer reactions is discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4777–4784, 2008     

Ring‐opening polymerization of 1,3‐benzoxazines by p‐toluenesulfonates as thermally latent initiators

p‐Toluenesulfonic acid (TsOH) and several alkyl p‐toluenesulfonates, that is, methyl p‐toluenesulfonate (TsOMe), cyclohexyl p‐toluenesulfonate (TsOCH), and neopentyl p‐toluenesulfonate (TsONP), were evaluated as initiators for the ring‐opening polymerization of benzoxazines. TsOH and TsOMe were highly efficient initiators that induced the polymerization at 60 and 80 °C, respectively. In contrast, TsOCH and TsONP did not initiate the polymerization below 100 °C, while they induced the polymerization at elevated temperatures, 120 and 150 °C, respectively. When TsOCH was used as an initiator, the corresponding polymerization rate was comparable to that observed for the polymerization with using TsOH as an initiator. These results suggested that neutral TsOCH and TsONP can be regarded as “thermally latent initiators,” which underwent the thermal dissociation at the elevated temperatures to generate the corresponding alkyl cations and/or TsOH as the initiators of the polymerization. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011