Nitroxide‐mediated radical polymerization of 2‐(dimethylamino)ethyl acrylate and its sequential block copolymerization with styrene and N‐butyl acrylate

Nitroxide‐mediated radical polymerization (NMRP) of 2‐(dimethylamino)ethyl acrylate (DMAEA) was carried out at 100–120 °C, initiated by MONAMS, an alkoxyamine based on N‐tert‐butyl‐N‐(1‐diethyl phosphono‐2,2‐dimethylpropyl)nitroxide, SG1. Controlled polymerization can be achieved by the addition of free SG1 (the initial molar ratio of SG1 to MONAMS ranged from 0.06 to 0.12), giving a linear first‐order kinetic plot up to 55–70% conversion depending on the reaction conditions. The molecular weights show a near linear increase with conversion; however, they deviate to some extent with theoretical values. SG1‐mediated polymerization of DMAEA at 112 °C is also controlled in organic solvents (N,N‐dimethylformide, anisole, xylene). Polymerization rate increases with increasing solvent polarity. Chain transfer to polymer produces ～1 mol % branches in bulk and 1.2–1.9 mol % in organic solvents, typical of those for acrylates. From poly(styrene) (pS) and poly(n‐butyl acrylate) (pBA) macroinitiators, amphiphilic di‐ and triblock copolymers p(S‐b‐DMAEA), p(DMAEA‐b‐S‐b‐DMAEA), p(BA‐b‐DMAEA), and p(DMAEA‐b‐BA‐b‐DMAEA) were synthesized via NMRP at 110 °C. Polymers were characterized by GPC, NMR, surface tension measurements, and DSC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 414–426, 2006     

Nitroxide‐mediated living free‐radical polymerization of styrene: A systematic study of the variation of the alkoxyamine concentration

The effect of the variation of the alkoxyamine concentration on the conversion and polydispersity of the nitroxide‐mediated living free‐radical polymerization of styrene is discussed. Four different alkoxyamines ( 1 – 4 ) have been used for these studies. For an alkoxyamine with a small equilibrium rate constant (K), such as styryl–TEMPO 2 , the conversion is governed by the autopolymerization of styrene. For efficient alkoxyamines 1 , 3 , and 4 , the conversion at high alkoxyamine concentrations is higher than the conversion obtained by autopolymerization. At high alkoxyamine concentrations, the conversions vary to a small extent for all the alkoxyamines studied. As long as the conversion remains high, the polydispersity index is small. In addition, simulations of polymerizations with a program for modeling nonlinear dynamics are discussed. Polymerizations with efficient alkoxyamines at high alkoxyamine concentrations are well described by the kinetic scheme applied. K for alkoxyamines 1 and 4 has been estimated with the simulations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3342–3351, 2004     

Nitroxide‐mediated controlled radical polymerizations of styrene derivatives

Several (protected) amine and alcohol functionalized styrene monomers were synthesized via readily accessible synthetic routes. The controlled radical copolymerization of these functionalized styrene monomers with styrene was performed using two alkoxyamines, namely N‐(2‐methylpropyl)‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐O‐(2‐carboxylprop‐2‐yl) hydroxylamine (MAMA‐SG1) and N‐tert‐butyl‐N‐(2‐methyl‐1‐phenylpropyl)‐O‐(1‐phenylethyl)hydroxylamine. The copolymers obtained showed low polydispersities, controlled molecular weights, and a random topology. The thermal properties of the polymers were determined with differential scanning calorimetry. All polymers were amorphous and showed glass transition temperatures between 40 and 111 °C. Deprotection of the copolymers afforded amine or alcohol pendant polystyrenes which were readily functionalized with isocyanates. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Copolymerization of 2,3,4,5,6‐Pentafluorostyrene and Methacrylic Acid by Nitroxide‐Mediated Polymerization: The Importance of Reactivity Ratios

Amphiphilic block copolymers of 2,3,4,5,6‐pentafluorostyrene (PFS) and methacrylic acid (MAA) are synthesized via nitroxide‐mediated polymerization (NMP). It is established that to obtain a controlled copolymerization a minimum of 40 mol% of PFS is required, which is significantly greater than other copolymerization systems such as using 4.5–8 mol% styrene or 1 mol% of 9‐(4‐vinylbenzyl)‐9H‐carbazole to control the copolymerization of methacrylates. It is surmised that this lack of control is due to the reactivity ratios that favor the addition of MAA rather than PFS (r_PFS = 0.14, r_MAA = 6.97). However this reactivity ratio pair suggests that a one‐shot delayed injection approach can be utilized to synthesize almost pure block copolymers in one pot. Therefore, poly(PFS)‐b‐(PFS‐ran‐MAA) block copolymers are synthesized by a one‐shot delayed addition of MAA. While the concentration of irreversibly terminated chains is evident these results suggest a promising route to the synthesis of fluorinated amphiphilic block copolymers by NMP.

     

Facile and versatile synthesis of rod‐coil poly(3‐hexylthiophene)‐based block copolymers by nitroxide‐mediated radical polymerization

A well‐defined and monofunctional poly(3‐hexylthiophene)‐based (P3HT) macroinitiator has been obtained through a clean, simple, and an efficient multistep synthesis process. The macroinitiator is obtained via intermolecular radical 1,2‐addition onto an ω‐acrylate‐terminated P3HT macromonomer. In a second step, well‐defined rod‐coil block copolymers were obtained by nitroxide‐mediated radical polymerization (NMRP) using the so‐called Blocbuilder^®. The polymerization was found to be controlled with various monomers such as styrene, isoprene, 4‐vinylpyridine, or methyl acrylate. This process constitutes a very promising way to obtain versatile and clean materials for organic electronics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of star polymers via nitroxide mediated free‐radical polymerization: A “core‐first” approach using resorcinarene‐based alkoxyamine initiators

The synthesis of new octafunctional alkoxyamine initiators for nitroxide‐mediated radical polymerization (NMRP), by the derivatization of resorcinarene with nitroxide free radicals viz TEMPO and a freshly prepared phosphonylated nitroxide, is described. The efficiency of these initiators toward the controlled radical polymerization of styrene and tert‐butyl acrylate is investigated in detail. Linear analogues of these multifunctional initiators were also prepared to compare and evaluate their initiation efficiency. The favorable conditions for polymerization were optimized by varying the concentration of initiators and free nitroxides, reaction conditions, etc., to obtain well‐defined star polymers. Star polystyrene thus obtained were further used as macro‐initiator for the block copolymerization with tert‐butyl acrylate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5559–5572, 2007     

α,ω‐Nitroxide‐Capped Polystyrenes and Poly(butyl acrylate)s as Macroinitiators for the Free‐Radical Polymerization of Methyl Methacrylate

The use of a bisaminooxy compound as initiator for nitroxide‐mediated radical polymerization (NMRP) of styrene or n‐butyl acrylate allows the synthesis of α,ω‐nitroxide‐capped polymers. At high temperatures and with the addition of acetic anhydride, it was found that these polymers could be applied as macroinitiators in the free‐radical polymerization of methyl methacrylate. This enables the synthesis of block copolymers with only minor contents of homopolymer.

The structure of bis‐TIPNO, the bisaminooxy compound used as an initiator for the nitroxide‐mediated radical polymerization of styrene or n‐butyl acrylate.     

Nitroxide‐mediated controlled statistical copolymerizations of N‐isopropylacrylamide with N‐tert‐butylacrylamide

The copolymerization of N‐isopropylacrylamide (NIPAM) and N‐tert‐butylacrylamide (TBAM) via conventional radical polymerization and nitroxide‐mediated polymerization (NMP) with N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)]nitroxide (SG1) was investigated. The monomer reactivity ratios were determined to be 0.58 and 1.00 for NIPAM and TBAM, respectively. The reactivities were approximately the same at 120 and 60 °C in N,N‐dimethylformamide (DMF) and toluene, respectively, for the conventional copolymerizations and in DMF at 120 °C for NMP. Controlled/living characteristics for NMP were achieved with a 2,2′‐azobisisobutyronitrile/SG1 bimolecular system and a unimolecular polystyrene [poly(STY)]–SG1 macroinitiator in the presence of excess free SG1. Block copolymers of poly(N‐isopropylacrylamide‐stat‐N‐tert‐butylacrylamide) [poly(NIPAM‐stat‐TBAM)] with styrene {poly(N‐isopropylacrylamide‐stat‐N‐tert‐butylacrylamide)‐block‐polystyrene [poly(NIPAM‐stat‐TBAM)‐block‐poly(STY)]} were obtained by chain extension of either poly(NIPAM‐stat‐TBAM)–SG1 with styrene or poly(STY)–SG1 with NIPAM/TBAM. A comparison of the number‐average molecular weight calculated from the end‐group content with the number‐average molecular weight measured by gel permeation chromatography for poly(NIPAM‐stat‐TBAM)‐block‐poly(STY)–SG1 indicated that nearly all poly(NIPAM‐stat‐TBAM) chains were capped by SG1 and were thus living. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6410–6418, 2006     

Atom transfer radical homo‐ and block copolymerization of methyl 1‐bicyclobutanecarboxylate

A non‐olefinic monomer, methyl 1‐bicyclobutanecarboxylate (MBC), was successfully polymerized by the controlled/“living” atom transfer radical polymerization (ATRP) technique, resulting in a well‐defined homopolymer, PMBC, with only cyclobutane ring units in the polymer chain. An AB block copolymer poly(methyl 1‐bicyclobutanecarboxylate)‐b‐polystyrene (PMBC‐b‐PS), having an all‐ring unit segment, was also synthesized with narrow polydispersity and designed number‐average molecular weight in addition to precise end groups. The ¹H NMR spectra, glass‐transition temperature, and thermal stability of PMBC, PMBC‐b‐PS, and PS‐b‐PMBC were investigated. The experimental results showed that the cyclobutane rings in the two block polymers improved their thermal stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1929–1936, 2002     

Synthesis of poly(chloromethylstyrene‐b‐styrene) block copolymers by controlled free‐radical polymerization

The controlled free‐radical polymerization of styrene and chloromethylstyrene monomers in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxyl (TEMPO) has been studied with the aim of synthesizing block copolymers with well‐defined structures. First, TEMPO‐capped poly(chloromethylstyrene) was prepared. Among several initiating systems [self‐initiation, dicumyl peroxide, and 2,2′‐azobis(isobutyronitrile)], the last offered the best compromise for obtaining a good control of the polymerization and a fast polymerization rate. The rate of the TEMPO‐mediated polymerization of chloromethylstyrene was independent of the initial concentration of TEMPO but unexpectedly higher than the rate of the thermal self‐initiated polymerization of chloromethylstyrene. Transfer reactions to the chloromethyl groups were thought to play an important role in the polymerization kinetics and the polydispersity index of the resulting poly(chloromethylstyrene). Second, this first block was used as a macroinitiator in the polymerization of styrene to obtain the desired poly(chloromethylstyrene‐b‐styrene) block copolymer. The kinetic modeling of the block copolymerization was in good agreement with experimental data. The block copolymers obtained in this work exhibited a low polydispersity index (weight‐average molecular weight/number‐average molecular weight < 1.5) and could be chemically modified with nucleophilic substitution reactions on the benzylic site, opening the way to a great variety of architectures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3845–3854, 2000     

Nitroxide‐Mediated Aqueous Dispersion Polymerization: From Water‐Soluble Macroalkoxyamine to Thermosensitive Nanogels

Self‐stabilized nanoparticles with a temperature‐responsive poly[(N,N‐diethylacrylamide)‐co‐(N,N′‐methylenebisacrylamide)] microgel core and a covalently attached hairy shell were synthesized via a simple nitroxide‐mediated controlled free‐radical aqueous dispersion polymerization, using a poly(sodium acrylate) alkoxyamine macroinitiator. With this method, high solid content, surfactant‐free particle suspensions were prepared, with diameter ranging from 49 to 118 nm at high temperature, and able to reversibly swell with water at low temperature. The proposed method requires a limited number of reagents in a simple polymerization procedure and thus avoids many drawbacks generally encountered in the synthesis of thermally responsive microgel particles.

     

High solids TEMPO‐mediated radical semibatch emulsion polymerization of styrene

A bicomponent initiation system consisting of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) and the water soluble initiator potassium persulfate (KPS) was used to develop a robust and versatile semibatch emulsion polymerization process to obtain polystyrene (PS) latexes with solids contents of 5–40 wt %. A window of operating conditions was found that yielded high conversion (>95%) stable latexes and well controlled polymers, overcoming limitations found in previous attempts at developing similar processes using TEMPO. The critical parameters studied were surfactant concentration, monomer concentration in the nucleation step and the monomer feed rate in the semibatch step. Methyl acrylate (MA) was used in the nucleation step to improve the nitroxide efficiency (N_Eff). Latexes having molecular weight distribution (MWD) with dispersity (?) lower than 1.5, average particle size (D_p) from ≈32 to ≈500 nm, nitroxide efficiencies N_Eff up to ≈1.0 and monomer conversions >90% were obtained in less than 12 h with solids contents up to 40 wt %. These results constitute a significant advance over prior efforts in TEMPO‐mediated polymerization in aqueous dispersions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 49–62     

Incorporating glycidyl methacrylate into block copolymers using poly(methacrylate‐ran‐styrene) macroinitiators synthesized by nitroxide‐mediated polymerization

Methyl methacrylate/styrene (MMA/S), ethyl methacrylate/styrene (EMA/S) and butyl methacrylate/styrene (BMA/S) feeds (>90 mol % methacrylate) were copolymerized in 50 wt % p‐xylene at 90 °C with 10 mol % of additional SG1‐free nitroxide mediator relative to unimolecular initiator (BlocBuilder^®) to yield methacrylate rich copolymers with polydispersities _w/ _n = 1.23–1.46. k_pK values (k_p = propagation rate constant, K = equilibrium constant) for MMA/S copolymerizations were comparable with previous literature, whereas EMA/S and BMA/S copolymerizations were characterized by slightly higher k_pK's. Chain extensions with styrene at 110 °C initiated by the methacrylate‐rich macroinitiators (number average molecular weight _n = 12.9–33.5 kg mol^?1) resulted in slightly broader molecular weight distributions with _w/ _n = 1.24–1.86 and were often bimodal. Chain extensions with glycidyl methacrylate/styrene/methacrylate (GMA/S/XMA where XMA = MMA, EMA or BMA) mixtures at 90 °C using the same macroinitiators resulted frequently in bimodal molecular weight distributions with many inactive macroinitiators and higher _w/ _n = 2.01–2.48. P(XMA/S) macroinitiators ( _n = 4.9–8.9 kg mol^?1), polymerized to low conversion and purified to remove “dead” chains, initiated chain extensions with GMA/MMA/S and GMA/EMA/S giving products with _w/ _n ～ 1.5 and much fewer unreacted macroinitiators (<5%), whereas the GMA/BMA/S chain extension was characterized by slightly more unreacted macroinitiators (～20%). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2574–2588, 2009     

Well‐defined polyoxazoline‐based alkoxyamines as efficient macroinitiators in nitroxide‐mediated radical polymerization of styrene

The synthesis of two well‐defined 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐nitroxide‐terminated poly(2‐methyl‐2‐oxazoline) with narrow dispersity (M_w/M_n = 1.1) has been achieved for the first time. The insertion of the alkoxyamine end groups at one or both ends of poly(2‐methyl‐2‐oxazoline) (PMEOX) chains has been successfully done using a method based on “terminating reagent method.” These macroinitiators have molecular weights ranging from 6.3 × 10³ to 9.4 × 10³ g mol^?1. In contrast, attempt to introduce the alkoxyamine group at one end of PMEOX chain through the “initiator method” has furnished a mixture of alkoxyamine‐graft polyoxazolines because of rearrangement of alkoxyamine occurring during the synthesis of PMEOX. The macroinitiators obtained by terminating reagent method have been used successfully for polymerization of styrene by nitroxide‐mediated radical polymerization (NMP), which exhibited all the expected features of a controlled system. The control of NMP has been proved by a good agreement between theoretical and experimental molecular weights and by narrow dispersity (M_w/M_n < 1.2). Different types of well‐defined multiblock copolymers have been prepared: diblock copolymers poly[(2‐methyl‐2‐oxazoline)‐b‐(styrene)] (PMEOX‐b‐PS) and, for the first time, triblock copolymers poly[(styrene)‐b‐(2‐methyl‐2‐oxazoline)‐b‐(styrene)] (PS‐b‐PMEOX‐b‐PS). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Self‐Assembly in Water of Poly(acrylic acid)‐Based Diblock Copolymers Synthesized by Nitroxide‐Mediated Polymerization

Summary: Amphiphilic diblock copolymers consisting of a hydrophilic block, poly(acrylic acid), and a hydrophobic block, polystyrene, were synthesized by direct nitroxide‐mediated polymerization using the PS block as a macro‐initiator for the first time. Several techniques were used to characterize the amphiphilic block copolymers (size exclusion chromatography, NMR spectroscopy). The proposed method can lead to samples with a broad range of composition and molar mass. Preliminary studies of their self‐assembly in aqueous medium using fluorescence spectroscopy and small‐angle neutron scattering are presented.

Schematic of the formation of the PS‐b‐PAA block copolymers and their micellization in aqueous media.     

Synthesis of poly(n‐hexyl isocyanate‐b‐N‐vinylpyrrolidone) block copolymers by the combination of anionic and nitroxide‐mediated radical polymerizations: Micellization properties in aqueous solutions

A combination of anionic and nitroxide‐mediated radical polymerizations (dual initiator) was employed for the synthesis of poly(n‐hexyl isocyanate‐b‐N‐vinylpyrrolidone) (PHIC‐b‐PNVP) block copolymers. The samples were characterized with a size exclusion chromatograph equipped with refractive‐index and light scattering detectors as well as ¹H NMR spectroscopy. Relatively good control over the molecular weights was achieved. However, rather broad molecular weight distributions were obtained. The micellar properties of the PHIC‐b‐PNVP block copolymers were studied in water, which is a selective solvent for the poly(N‐vinylpyrrolidone) blocks. Static and dynamic light scattering revealed the presence of equilibrium between the micelles and clusters. The clusters partially deaggregated with increasing temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5719–5728, 2006     

Nitroxide‐mediated radical copolymerization of methyl methacrylate controlled with a minimal amount of 9‐(4‐vinylbenzyl)‐9H‐carbazole

The controlled nitroxide‐mediated homopolymerization of 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) and the copolymerization of methyl methacrylate (MMA) with varying amounts of VBK were accomplished by using 10 mol % {tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino} nitroxide relative to 2‐({tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino}oxy)‐2‐methylpropionic acid (BlocBuilder?) in dimethylformamide at temperatures from 80 to 125 °C. As little as 1 mol % of VBK in the feed was required to obtain a controlled copolymerization of an MMA/VBK mixture, resulting in a linear increase in molecular weight versus conversion with a narrow molecular weight distribution (M_w /M_n ≈ 1.3). Preferential incorporation of VBK into the copolymer was indicated by the MMA/VBK reactivity ratios determined: r_VBK = 2.7 ± 1.5 and r_MMA = 0.24 ± 0.14. The copolymers were found significantly “living” by performing subsequent chain extensions with a fresh batch of VBK and by ³¹P NMR spectroscopy analysis. VBK was found to be an effective controlling comonomer for NMP of MMA, and such low levels of VBK comonomer ensured transparency in the final copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Nitroxide‐Mediated Polymerization of Bio‐Based Farnesene with a Functionalized Methacrylate

Farnesene (Far) is a bio‐based terpene monomer that is similar in structure to commercially used dienes like butadiene and isoprene. Nitroxide‐mediated polymerization (NMP) is adept for the polymerization of dienes, but not particularly effective at controlling the polymerization of methacrylates using commercial nitroxides. In this study, Far is statistically copolymerized with a functional methacrylate, glycidyl methacrylate (GMA), by NMP using N‐succinimidyl modified commercial BlocBuilder (NHS‐BB) initiator. Reactivity ratios are determined to be r _Far = 0.54 ± 0.04 and r _GMA = 0.24 ± 0.02. The ability of the poly(Far‐stat‐GMA) chains to reinitiate for chain extension with styrene showed a clear shift in molecular weight and monomodal distribution. Copolymerizations using a new alkoxyamine, Dispolreg 007 (D7), is explored as it is shown to homopolymerize methacrylates, but not yet reported for statistical copolymerizations. Bimodal molecular weight distributions are observed when an equimolar ratio of Far and GMA is copolymerized with D7 due to slow decomposition of the initiator, but chain ends are active as shown by successful chain extension with styrene. Both NHS‐BB and D7 initiators are used to synthesize poly[Far‐b‐(GMA‐stat‐Far)] and poly(Far‐b‐GMA) diblock copolymers. While the NHS‐BB initiated polymer chains have lower dispersity, D7 exhibits more linear polymerization kinetics and maintains more active chain ends.