Synthesis of backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s through proton‐transfer polymerization

Stimuli‐responsive hyperbranched polymers have attracted great attention in recent years because of their wide applications in biomedicine. Through proton‐transfer polymerization of triethanolamine and 1,2,7,8‐diepoxyoctane with the help of potassium hydride, a series of novel backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s were prepared successfully in one‐pot. The degrees of branching of the resulting polymers were at 0.40–0.49. Turbidity measurements revealed that hyperbranched poly(amine‐ether)s exhibited thermo and pH dual‐responsive properties in water. Importantly, these responsivities could be readily adjusted by changing the polymer composition as well as the polymer concentration in aqueous solution. Moreover, in vitro evaluation demonstrated that hyperbranched poly(amine‐ether)s showed low cytotoxicity and efficient cell internalization against NIH 3T3 cell lines. These results suggest that these backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s are promising materials for biomedicine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Tuning the optical properties of hyperbranched polymers through the modification of the end groups

Dye‐capped, hyperbranched, conjugated polymers were prepared by the modification of the peripheral bromo end groups of the hyperbranched polymer core with a palladium‐catalyzed Suzuki–Miyaura cross‐coupling reaction. The dye‐modified, hyperbranched polymers had high molecular weights and displayed good solubility in common organic solvents such as tetrahydrofuran, toluene, and chloroform. The structure of the dye‐modified, hyperbranched polymers was characterized by ¹H and ¹³C NMR and elemental analysis. The thermal properties of five kinds of hyperbranched polymers were investigated with thermogravimetric analysis and differential scanning calorimetry. The optical properties of the dye‐capped, hyperbranched polymers were investigated with ultraviolet‐absorption and fluorescence spectroscopy. The hyperbranched structure could effectively reduce the aggregation of the peripheral dyes. The emission colors of the hyperbranched polymers could be easily tuned by end‐group modification. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 111–124, 2007     

Synthesis and characterization of end‐group modified hyperbranched polyetherimides

End‐group modified hyperbranched polyetherimides were prepared by a one‐pot, two‐step reaction sequence. General synthetic techniques were developed to prepare both monofunctional terminating segments and the corresponding modified polyetherimide hyperbranched polymers. Monofunctional groups were used to terminate an AB₂‐type polycondensation reaction, generating capped hyperbranched polymers (HBPs). The composition and constitution of the end groups controlled the solubility and thermal properties of the HBPs. For the same polymer backbone, different end groups were able to shift the glass‐transition temperature nearly 100 °C. End‐group modification greatly influenced the film‐forming ability of the HBPs. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 936–946, 2002     

New series of AB2‐type hyperbranched polytriazoles derived from the same polymeric intermediate: Different endcapping spacers with adjustable bulk and convenient syntheses via click chemistry under copper(I) catalysis

In this article, according to the concept of “suitable isolation group,” six new AB₂‐type polytriazoles containing azo‐chromophore moieties, derived from the same hyperbranched polymer intermediate, were successfully prepared through click reaction under copper(I) catalysis by modifying the synthetic route, in which different isolation groups in different size were introduced to the periphery of the hyperbranched polymers as end‐capping moieties. With the different end‐capping groups, these hyperbranched polymers, P1 – P6 , exhibited different solubility and processability; also, their nonlinear optical properties were modified accordingly, realizing the adjustment of the properties of hyperbranched polymers through the structural design. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of poly(urethane urea) by in situ polymerization inside stone

The first synthesis of poly(urethane urea) by in situ polymerization inside stone was successfully carried out. Poly(propylene glycol), isophorondiisocyanate, and a catalyst [tin(II) ethyl hexanoate, aluminum acetylacetonate, or zirconium acetylacetonate] were mixed with acetone in petri dishes, and tuff samples were placed in the dishes at room temperature. The effects of the comonomer ratio, catalyst, and catalyst concentration on the chemical structure of the synthesized poly(urethane urea) were investigated. The poly(urethane urea) distribution inside the tuff and the related morphology were also analyzed, as well as the reversibility of the performed treatments. Finally, the effects of the in situ polymerization polymer on the properties of the stone, such as water capillary absorption and permeability to water vapor, were assessed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 542–552, 2005     

End functionalization of hyperbranched poly(siloxysilane): Novel crosslinking agents and hyperbranched–linear star block copolymers

Functionalized hyperbranched poly(siloxysilane)s have been prepared by hydrosilylation reactions involving the multiple silicon hydride (SiH) groups of the polymer to introduce other reactive groups such as epoxy, amine, and hydroxyl groups. The possible use of these modified polymers as novel crosslinking agents is discussed. The same hydrosilylation reaction is used to attach preformed linear poly(isobutylene) (PIB) or poly(ethylene oxide) (PEO) onto the hyperbranched polymer to afford unusual hyperbranched–linear star block copolymers. The PIB‐derived copolymer is shown to be very hydrophobic, whereas its PEO‐derived counterpart is amphiphilic. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2970–2978, 2000     

Synthesis and characterization of ultraviolet‐curable hyperbranched poly(siloxysilane)s

Two UV‐curable hyperbranched poly(siloxysilane)s ( I and III ) containing vinyl and allyl end groups were synthesized via polyhydrosilylation with methylbis(methylethylvinylsiloxy)silane and methylbis(dimethylallylsiloxy)silane monomers. A cationic UV‐curable hyperbranched polymer ( II‐Ep ) with epoxy end groups was prepared via the hydrosilylation of hyperbranched polymer II with Si? H terminated groups and glycidyl methacrylate, and II was also obtained via the polyhydrosilylation of AB₂‐type monomer methylvinylbis(methylethylsiloxy)silane. All hydrosilylation reactions were catalyzed by Pt/C or chloroplatinic acid. Three AB₂‐type monomers were synthesized via the hydrolysis of functional chlorosilane, which was prepared with Grignard reagents and dichlorosilane. The molecular structures of the polymers were characterized with ¹H NMR, Fourier transform infrared, and gel permeation chromatography, and the UV‐curing behaviors of the polymers under different atmospheres and with different photoaccelerators were also investigated. The thermostability of uncured and cured polymers was examined with thermogravimetric analysis, and the data indicated that the orders of the onset decomposition temperatures for the cured polymers and the residue weights were as follows: III (380 °C) > I (320 °C) > II‐Ep (280 °C) and I (70.4%) > III (64.1%) > II‐Ep (60.9%), respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1883–1894, 2005     

Synthesis of poly(urethane‐imide) using aromatic secondary amine‐blocked polyurethane prepolymer

A set of poly(urethane‐imide)s were prepared using blocked Polyurethane (PU) prepolymer and pyromellitic dianhydride (PMDA). The PU prepolymer was prepared by the reaction of polyether glycol and 2,4‐tolylene diisocyanate, and end capped with N‐methyl aniline. The PU prepolymer was reacted with PMDA until the evolution of carbon dioxide ceased. The effect of tertiary amine catalysts, organo tin catalysts, solvents, and reaction temperature were studied and compared with the poly(urethane‐imide) prepared using phenol‐blocked PU prepolymer. N‐methyl aniline blocked PU prepolymer gave a higher molecular weight poly(urethane‐imide) at a lower reaction temperature in a shorter time. Amine catalysts were found to be more efficient than organo tin catalysts. The reaction was favorable in particular with N‐ethylmorpholine and diazabicyclo(2.2.2)octane (DABCO) as catalysts, and dimethylpropylene urea as a reaction medium. The poly(urethane‐imide)s were characterized by FTIR, GPC, TGA, and DSC analyses. The molecular weight decreased with an increase in reaction temperature. The thermal stability of the PU was found to increase by the introduction of imide component. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4032–4037, 2000     

Hyperbranched aromatic poly(ether imide)s: Synthesis,characterization, and modification

The synthesis and characterization of hyperbranched aromatic poly(ether imide)s are described. An AB₂ monomer, which contained a pair of phenolic groups and an aryl fluoro moiety activated toward displacement by the attached imide heterocyclic ring, was prepared. The nucleophilic substitution of the fluoride with the phenolate groups led to the formation of an ether linkage and, subsequently, to the hyperbranched poly(ether imide), which contained terminal phenolic groups. A similar one‐step polymerization involving a monomer that contained silyl‐protected phenols yielded a hyperbranched poly(ether imide) with terminal silylated phenols. The degree of branching of these hyperbranched polymers was approximately 55%, as determined by a combination of model compound studies and ¹H NMR integration experiments. End‐capping reactions of the terminal phenolic groups were readily accomplished with a variety of acid chlorides and acid anhydrides. The nature of the chain‐end groups significantly influenced physical properties, such as the glass‐transition temperature and the solubility of the hyperbranched poly(ether imide)s. As the length of the acyl chain of the terminal ester groups increased, the glass‐transition temperature value for the polymer decreased, and the solubility of the polymer in polar solvents was reduced, becoming more soluble in nonpolar solvents. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2536–2546, 2001     

Synthesis and properties of hyperbranched polyurethanes,hyperbranched polyurethane copolymers with and without ether and ester groups using blocked isocyanate monomers

Starting from 3,5‐diamino benzoic acid, 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzyl ether, an AB₂‐type blocked isocyanate monomer with flexible ether group, and 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzoate, an AB₂‐type blocked isocyanate monomer with ester group, were synthesized for the first time. Using the same starting compound, 3,5‐bis{(benzoxycarbonyl)imino}benzylalcohol, an AB₂‐type blocked isocyanate monomer, was synthesized through a highly efficient short‐cut route. Step‐growth polymerization of these monomers at individually optimized experimental conditions results in the formation of hyperbranched polyurethanes with and without ether and ester groups. Copolymerizations of these monomers with functionally similar AB monomers were also carried out. The molecular weights of the polymers were determined using GPC and the values (M_w) were found to vary from 1.5 × 10⁴ to 1.2 × 10⁶. While hyperbranched polyurethanes having no ether or ester group were found to be thermally stable up to 217 °C, hyperbranched poly(ether–urethane)s and poly(ester–urethane)s were found to be thermally stable up to 245 and 300 °C, respectively. Glass transition temperature (T_g) of polyurethane was reduced significantly when introducing ether groups into the polymer chain, whereas T_g was not observed even up to 250 °C in the case of poly(ester–urethane). Hyperbranched polyurethanes derived from all the three different AB₂ monomers were soluble in highly polar solvents and the copolymers showed improved solubility. Polyethylene glycol monomethyl ether of molecular weight 550 and decanol were used as end‐capping groups, which were seen to affect the thermal, solution, and solubility properties of polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3877–3893, 2007     

Synthesis and properties of hyperbranched poly(ether sulfone)s prepared by self‐polycondensation of novel AB2 monomer

Hyperbranched poly(ether sulfone)s were prepared by the self‐polycondensation of the novel AB₂ monomer, 4‐(3,5‐hydroxyphenoxy)‐4′‐fluorodiphenylsulfone. The high‐molecular‐weight polymers were isolated in good yields. The degree of branching (DB) of the resulting polymers was investigated by the preparation of dendritic and linear model compounds. The DB determined by gated decoupling ¹³C NMR measurements was in the range 0.17–0.41 and was dependent on the base used for the self‐polycondensation. It was found that cesium fluoride was an effective base to form the polymer having the DB of 0.41. The resulting hyperbranched poly(ether sulfone)s showed good solubility in organic solvents. The solubility and the glass transition temperature of the polymers were influenced by the terminal functional groups. The unique thermal crosslinking phenomenon was observed during the DSC measurements of the hydroxyl‐terminated hyperbranched poly(ether sulfone) under air condition. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of hyperbranched poly(urea‐urethane)s based on AA* and B2B* monomers

Hyperbranched aromatic and aliphatic poly(urea‐urethane)s were prepared by the one‐pot method using 2,4‐toluylene diisocyanate (TDI), isophorone diisocyanate, and 2(3‐isocyanatopropyl)cyclohexyl isocyanate as AA* monomers and diethanol amine and diisopropanol amine as B₂B* monomers. The characteristics of the resulting polymers were very sensitive to slight changes in the reaction conditions, such as temperature, concentration, and type of catalyst used, as can be seen from the results of gel permeation chromatography and differential scanning calorimetry. The structures were analyzed in detail using ¹H and ¹³C NMR spectroscopy. By using model compounds, the different isomeric structures of the TDI polymers were deduced, their percentages of their linear, terminal, and dendritic subunits were calculated, and their degree of branching (DB) was determined. DB values up to 70% were reached depending on the reaction conditions and stoichiometry of the monomers. The number of terminal groups decreased significantly when dibutylamine was used to stop the reaction instead of B₂B*, indicating the presence of a significant number of unreacted isocyanate groups in the hyperbranched product when the polyaddition reaction was stopped. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3062–3081, 2004     

Synthesis and characterization of hyperbranched‐poly(siloxysilane)‐based polymeric photoinitiators

Three UV‐sensitive, hyperbranched‐poly(siloxysilane)‐based polymeric photoinitiators, bearing an alkyl phenone moiety linked to the surface of the hyperbranched polymer, were synthesized via the hydrosilylation of hyperbranched poly(siloxysilane) and modified UV‐sensitive compounds. Hyperbranched poly(siloxysilane) was prepared via the polyhydrosilylation of the AB₂‐type monomer methylvinyldichlorosilane. The chemical structures of the polymeric photoinitiators were characterized with ¹H, ¹³C, and ²⁹Si NMR, elemental analysis, Fourier transform infrared, differential scanning calorimetry, UV spectrophotometry, and thermogravimetric analysis. The UV‐curing behaviors of the blends of the hyperbranched polymeric photoinitiators with UV‐curable epoxy acrylate (EA) resin were determined by Fourier transform infrared, and the results showed that the initiation efficiency of the polymeric photoinitiators was excellent and that the thermostability of the EA/polymeric photoinitiator curing systems was higher than that of the EA/photoinitiators. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3261–3270, 2006     

Molecular mobility of free‐radical‐functionalized carbon‐nanotube/siloxane/poly(urea urethane) nanocomposites

Multiwalled carbon nanotubes (MWNTs) were functionalized by a free‐radical reaction of vinyltriethoxysilane and were blended with poly(urea urethane) (PUU) containing poly(dimethylsiloxane) as a soft segment. PUU was end‐capped with aminopropyltriethoxysilane (A‐silane) or phenyltriethoxysilane (P‐silane).A‐silane‐end‐capped PUU was covalently bonded to functionalized MWNTs, whereas P‐silane‐end‐capped PUU was noncovalently bonded to pristine MWNTs by a π–π interaction. Fourier transform infrared, Raman spectra, and thermogravimetric analysis confirmed the functionalization of MWNTs. The results showed that the optimal reaction time of the functionalization of MWNT was 8 h, and the organic content of the modified carbon nanotubes reached 35.22%. Solid‐state nuclear magnetic resonance and dynamic mechanical analysis were used to investigate the molecular structure and molecular mobility of the carbon‐nanotube/PUU nanocomposites. A‐silane PUU covalently bonded to MWNTs showed a considerable reduction in the molecular motion of the soft segment, which led to the glass‐transition temperature decreasing from ?117 to ?127 °C as MWNTs were incorporated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6084–6094, 2005     

Preparation and characterization of waterborne poly(urethane urea) with well‐defined hard segments

A series of polyester‐based poly(urethane urea) (PUU) aqueous dispersions with well‐defined hard segments were prepared from polyester polyol, 4,4′‐diphenylmethane diisocyanate, dimethylolpropionic acid, 1,4‐butanediol, isophorone diisocyanate, and ethylenediamine. These anionic‐type aqueous dispersions had good dispersity in water and were stable at the ambient temperature for more than 1 year. For these aqueous dispersions, the particle size decreased as the hard‐segment content increased, and the polydispersity index was very narrow (<1.10). Films prepared with the PUU aqueous dispersions exhibited excellent waterproof performance: the amount of water absorption was as low as 5.0 wt %, and the contact angle of water on the surface of this kind of film was as high as 103° (this led to a hydrophobic surface). The water‐resistant property of these waterborne PUU films could be well correlated with some crystallites and ordered structures of the well‐defined hard segments formed by hydrogen bonding between the urethane/urethane groups and urethane/ester groups, as well as the degree of microphase separation between the hard and soft segments in the PUU systems. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2606–2614, 2005     

Preparation of linear and hyperbranched fluorinated poly(aryl ether‐thioether) through para‐fluoro‐thiol click reaction

The para‐fluoro‐thiol “click” reaction (PFTCR) was utilized to prepare linear and hyperbranched fluorinated poly (aryl ether‐thioether). For this purpose, 1,2‐bis(perfluorophenoxy)ethane was prepared and reacted with 1,6‐hexandithiol and trimethylolpropane tris(3‐mercaptopropionate), respectively. While hyperbranched polymers were prepared using 0.5 M concentrations of starting materials at room temperature, the linear polymer syntheses were performed at different reaction temperatures and concentrations. The resulting polymers were mainly characterized by NMR measurements and a very distinct fluorine signals regarding meta‐ and ortho‐ positions in the ¹⁹F NMR were found for both polymer topologies. In addition to NMR analyses, both linear and hyperbranched polymers were further characterized by using Fourier transform infrared spectroscopy (FT‐IR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1853–1859     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Synthesis and characterization of novel poly(amide urea)s,materials with outstanding mechanical properties

Four novel A‐B condensation monomers containing an amine and a carboxylic acid function are described, along with their polymerization to give main chain aromatic poly(amide urea)s. The monomers, and the polymer structural unit, are N,N′‐diphenylurea derivatives. When comparing wholly aromatic polyamides, or aramids, with the poly(amide urea)s described herein, we find that the chemical resistance to hydrolysis of the later polymers increases and their thermal resistance is diminished due to the main chain urea groups, whereas their water uptake is not greatly modified. The most striking result of the new poly(amide urea)s is their outstanding mechanical resistance: their Young's modulus rises as high as 5.5 GPa and their tensile strengths as high as 170 MPa for unoriented films prepared at laboratory scale by casting. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5398–5407, 2007     

Synthesis and characterization of poly(dimethylsiloxane‐urethane) elastomers: Effect of hard segments of polyurethane on morphological and mechanical properties

A series of poly(dimethylsiloxane‐urethane) elastomers based on hexamethylenediisocyanate, toluenediisocyanate, or 4,4′‐methylenediphenyldiisocyanate hard segment and polydimethylsiloxane (PDMS) soft segment were synthesized. In this study, a new type of soft‐segmented PDMS crosslinker was synthesized by hydrosilylation reaction of 2‐allyloxyethanol with polyhydromethylsiloxane, using Karstedt's catalyst. The synthesized soft‐segmented crosslinker was characterized by FT‐IR, ¹H, and ¹³C NMR spectroscopic techniques. The mechanical and thermal properties of elastomers were characterized using tensile testing, thermogravimetric analysis, differential scanning calorimetry (DSC), and dynamical mechanical analysis measurements. The molecular structure of poly(dimethylsiloxane‐urethane) membranes was characterized by ATR‐FTIR spectroscopic techniques. Infrared spectra indicated the formation of urethane/urea aggregates and hydrogen bonding between the hard and soft domains. Better mechanical and thermal properties of the elastomers were observed. The restriction of chain mobility has been shown by the formation of hydrogen bonding in the soft and hard segment domains, resulting in the increase in the glass‐transition temperature of soft segments. DSC analysis indicates the phase separation of the hard and soft domains. The storage modulus (E′) of the elastomers was increasing with increase in the number of urethane connections between the hard and soft segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2980–2989, 2006     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008