Impact fracture toughness of polyamide‐6/montmorillonite nanocomposites toughened with a maleated styrene/ethylene butylene/styrene elastomer

Polyamide‐6 (PA6)/montmorillonite (MMT) nanocomposites toughened with maleated styrene/ethylene butylene/styrene (SEBS‐g‐MA) were prepared via melt compounding. Before melt intercalation, MMT was treated with an organic surfactant agent. Tensile and impact tests revealed that the PA6/4% MMT nanocomposite fractured in a brittle mode. The effects of SEBS‐g‐MA addition on the static tensile and impact properties of PA6/4% MMT were investigated. The results showed that the SEBS‐g‐MA addition improved the tensile ductility and impact strength of the PA6/4% MMT nanocomposite at the expenses of its tensile strength and stiffness. Accordingly, elastomer toughening represents an attractive route to novel characteristics for brittle clay‐reinforced polymer nanocomposites. The essential work of fracture (EWF) approach under impact drop‐weight conditions was used to evaluate the impact fracture toughness of nanocomposites toughened with an elastomer. Impact EWF measurements indicated that the SEBS‐g‐MA addition increased the fracture toughness of the PA6/4% MMT nanocomposite. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 585–595, 2005     

SAXS investigation of structure–property relationship of polypropylene/montmorillonite composites during load cycling

Polypropylene (PP) can hardly be reinforced by the layered silicate montmorillonite (MMT), but the material fatigue appears somewhat reduced. The probable reason is amplified competitive nucleation of the PP by MMT component. Utilizing small‐angle X‐ray scattering (SAXS) from synchrotron, we investigate the nanostructure evolution of the PP in straining experiments from neat PP and compatibilized composite materials. The compatibilizer is a styrene–ethylene/butylene–styrene copolymer (SEBS). Oriented injection‐molded test bars are studied. The discrete SAXS probes variations of sizes and distances among those crystalline domains that are not placed at random. Crystallite dimensions and distances are documented for modeling purposes. The nanoscopic strain is computed from the distance variation and compared with the macroscopic strain. Differences between macroscopic and nanoscopic strain are observed. They require postulating regions with statistical placement of crystallites (poorly arranged region, PAR) in addition to the SAXS‐probed well‐arranged semi‐crystalline entities (WAE). The extensibility of WAEs must be different from that of the PARs. In neat PP, the observed WAEs are well developed and stronger than the PARs. In the composites, the WAEs are made from thin and less extended crystalline domains. They are weaker than the PARs that appear reinforced. Thus, enclosing each MMT layer a PAR is formed, and the WAEs generated farther away remain imperfect. Consequently, in the composites, the narrow crystalline domains from the WAEs do not break into even smaller pieces, and the fatigue of the composites is lower than that of the neat PP. Copyright © 2013 John Wiley & Sons, Ltd.     

Multiple melting and crystallization of nylon‐66/montmorillonite nanocomposites

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with organically modified montmorillonite (MMT). The organic MMT layers were exfoliated in a nylon‐66 matrix as confirmed by wide‐angle X‐ray diffraction (WAXD) and transmission electron microscopy. The presence of MMT layers increased the crystallization temperature of nylon‐66 because of the heterogeneous nucleation of MMT. Multiple melting behavior was observed in the nylon‐66/MMT nanocomposites, and the MMT layers induced the formation of form II spherulites of nylon‐66. The crystallite sizes L₁₀₀ and L₀₁₀ of nylon‐66, determined by WAXD, decreased with an increasing MMT content. High‐temperature WAXD was performed to determine the Brill transition in the nylon‐66/MMT nanocomposites. Polarized optical microscopy demonstrated that the dimension of nylon‐66 spherulites decreased because of the effect of the MMT layers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2861–2869, 2003     

Water‐assisted melt compounding of nylon‐6/pristine montmorillonite nanocomposites

An exploratory pioneering study on the fabrication of nylon‐6/montmorillonite (MMT) nanocomposites with the aid of water as an intercalating/exfoliating agent via melt compounding in a twin‐screw extruder was conducted. Commercial nylon‐6 pellets and pristine MMT powder were directly fed into the hopper of the extruder. Water was then injected into the extruder downstream. After interactions with the nylon‐6 melt/pristine MMT system, water was removed from the extruder further downstream via a venting gate. As such, no third‐component residual was left within the extrudates. Transmission electron microscopy micrographs showed that pristine MMT was uniformly dispersed in the nylon‐6 matrix. The contact time between water and the nylon‐6/pristine MMT system inside the extruder was so short that nylon‐6 was subjected to very little hydrolysis, if any. The resultant nanocomposites showed higher stiffness, superior tensile strength, and improved thermal stability in comparison with their counterparts obtained without water assistance and the nylon‐6/organic MMT nanocomposites. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1100–1112, 2005     

Structure–property relationship in PCL/starch blend compatibilized with starch‐g‐PCL copolymer

The polycaprolactone (PCL)/starch blends were prepared by using the starch‐g‐PCL (SGCL) graft copolymers as compatibilizers, and their mechanical properties were correlated with the compatibilizing effect of the SGCL copolymers having various molecular structures. The modulus and strength of the PCL/starch blend were decreased, whereas the percent elongation and the toughness were increased remarkably with the addition of SGCL having appropriate graft structure. These property changes were analyzed in terms of the PCL crystallinity and the interfacial adhesion between the PCL matrix and starch dispersion phases, which were dominated by the compatibilizing effects of the SGCL copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2430–2438, 1999     

Synthesis of a novel benzoxazine monomer‐intercalated montmorillonite and the curing kinetics of polybenzoxazine/clay hybrid nanocomposites

Polybenzoxazine (PBZ), which has a structure similar to that of phenolic resin, is formed through the thermal self‐curing of benzoxazine, that is through a heterocyclic ring opening reaction that requires no catalyst and releases no condensation byproducts. We have used the solvent blending method to prepare PBZ/clay nanocomposites possessing various clay contents. We synthesized a monofunctional benzoxazine monomer (MBM) and then treated the clay with this intercalation agent. The results of X‐ray diffraction (XRD) analysis indicated that MBM intercalated into the galleries of the clay; the nanocomposite possessed an exfoliated structure at 3% clay content. To better understand the curing kinetics of the PBZ/clay nanocomposites, we performed dynamic and isothermal differential scanning calorimetry (DSC) measurements. We describe the thermodynamics of the curing process, using all three of the Kissinger, Ozawa, and Kamal models. The Kissinger and Ozawa methods gave fairly close results for the calculated activation energies, which decreased upon increasing the clay content. The Kamal method, based on an autocatalytic model, suggested a total reaction order of between 2.4 and 2.8. The glass transition temperature (T_g) decreased upon increasing the clay content. Thermogravimetric analysis (TGA) indicated that the nanocomposites have higher decomposition temperatures than does the pristine PBZ; this finding suggests an enhancement in their thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 347–358, 2006     

Phase transition in polyamide‐66/montmorillonite nanocomposites on annealing

The crystalline‐phase transition in polyamide‐66/montmorillonite nanocomposites before melting was investigated by in situ X‐ray diffraction and is reported for the first time in this work. The phase‐transition temperature in the nanocomposites was 170 °C, 20 °C lower than that in polyamide‐66. The lower phase‐transition temperature of the nanocomposites could be attributed to the γ‐phase‐favorable environment caused by silicate layers. Meanwhile, the addition of silicate layers changed the crystal structure of the polyamide‐66 matrix and influenced the phase‐transition behavior. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 63–67, 2003     

Glycerol: a promising agent for nanodispersion and compatibility of EVA/organomodified montmorillonite nanocomposites

Ethylene‐vinyl acetate (EVA) nanocomposites were extruded with two types of organomodified montmorillonite (OMMT) and 1 wt% glycerol. The characterization of the nanocomposites was performed by transmission electron microscopy, X‐ray diffraction, differential scanning calorimetry, and dynamic mechanical analysis. The experimental results revealed that glycerol improved the Cloisite 30B clay exfoliation and promoted a rise in aspect ratio of the Cloisite 20A clay. In the rubbery region, the EVA/G showed a higher storage modulus than the EVA, as a result of the network of hydrogen bonds. The entanglements of long chains were more effective in the restrictions of large‐scale movements than the chemical interactions. The addition of glycerol promoted greater reinforcement and an increase in the tenacity of the nanocomposites in the glassy region. The use of glycerol for the production of EVA/OMMT nanocomposites was found to be promising. Copyright © 2015 John Wiley & Sons, Ltd.     

Polypropylene/organoclay nanocomposites compatibilized with hydroxyl‐functional polypropylenes

The properties of polypropylene composites can be tailored through the use of nanoclay fillers. The effectiveness of a metallocene‐catalyzed hydroxyl‐functional polypropylene in the compatibilization of polypropylene layered nanosilicate composites was studied, and the results were compared with those for a commercial maleic anhydride functionalized polypropylene. Polypropylene/organoclay nanocomposites were prepared by melt blending, and two polypropylene/compatibilizer/organoclay ratios, 90/5/5 and 70/20/10, were characterized. The organomodification of the clay was carried out with octadecylamine and N‐methylundecenylamine. The structure of the layered silicate was studied by transmission electron microscopy, wide‐angle X‐ray scattering, and small‐angle X‐ray scattering. The fracture surfaces of the composites and thus the efficiency of the compatibilizers to penetrate the galleries of the organoclays were characterized by scanning electron microscopy, and the melt viscosity was studied by stress‐controlled rotational rheometry. The nanostructure was observed with both alkyl amines used for intercalation. The fillers facilitated the processability of all the composites, consisting of equal amounts of compatibilizer and organoclay filler and, in some of the composites, containing twice as much compatibilizer as organoclay filler. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1892–1903, 2005     

Synthetic preparations,thermal properties and crystallization characterization of PLLA‐PPG block copolymers/clay nanocomposites

In this study, intercalation of the polymer or pre‐polymer from solution was used to blend different proportions of polylactic acid‐propylene glycol (LPG) copolymers (polypropylene glycols (PPG) of : 700, 1000, 2000) and lipophilic montmorillonite (clay) in order to investigate the melting and the crystalline nature of LPG copolymers/clay nanocomposites via a differential scanning calorimeter (DSC). In addition, changes in the intermolecular force and crystal morphology of the nanocomposites under different crystallization conditions were also studied. For the results, it was observed from a thermogravimetric analyzer that increasing the clay content elevated the weight loss temperature. In non‐isothermal experiments using a DSC, it was discovered that the melting temperature and crystallization temperature of the LPG copolymers also increased with increasing amounts of added clay. The crystallinity of LPG2000 + 1.5 wt% clay was enhanced by 17.00%; in addition, it was found in the crystallinity study that adding clay slowed down the crystallization rate of the LPG copolymers. Moreover, it was found via X‐ray diffractometer (XRD) that the intensity of the diffraction peaks of the 1.5 wt% specimen was stronger than that of the 0.5 wt% specimens. The results imply that copolymers with a longer chain length provide greater space for the crystals to grow, thus making it easier for larger crystals to grow. Conversely, the added clay generates an inhibitory effect in copolymers, reducing the d‐spacing (d) in the XRD. Therefore, adding clay would change the crystallization behavior and the morphology of the LPG copolymers. Copyright © 2015 John Wiley & Sons, Ltd.     

Shear‐induced change of exfoliation and orientation in polypropylene/montmorillonite nanocomposites

For the improved dispersion of montmorillonite (MMT) in a polypropylene (PP) matrix, PP/MMT nanocomposites prepared via direct melt intercalation were further subjected to oscillating stress achieved by dynamic packing injection molding. The shear‐induced morphological changes were investigated with an Instron machine, wide‐angle X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The original nanocomposites possessed a partly intercalated and partly exfoliated morphology. A transformation of the intercalated structure into an exfoliated structure occurred after shearing, and a more homogeneous dispersion of MMT in the PP matrix was obtained. However, the increase of the exfoliated structure was accompanied by the scarifying of the orientation of MMT layers along the shear direction. Some bended or curved MMT layers were found for the first time by TEM after shearing. However, the orientation of PP chains in the PP/MMT nanocomposites became very difficult under an external shear force; this indicated that the molecular motion of PP chains intercalated between MMT layers was highly confined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1–10, 2003     

Polypropylene nanocomposites with various functionalized‐multiwalled nanotubes: thermomechanical properties,morphology, gas permeation,and optical transparency

Polypropylene (PP) nanocomposites with three different functionalized‐multiwalled nanotubes (F‐MWNTs) are compared in terms of their thermomechanical properties, morphology, oxygen permeability, and optical transparency. The F‐MWNTs dodecanol‐MWNT, dodecylamine‐MWNT, and 1,1,1,3,3,3‐hexafluoro‐2‐phenyl‐2‐propanol‐MWNT were combined with PP to produce hybrid films. The variations of their properties with the matrix polymer F‐MWNT content are discussed. Transmission electron microscopy photographs show that most of the F‐MWNTs are dispersed homogeneously in the matrix polymer on the nanoscale, although some agglomerated F‐MWNT particles are formed. Even composites with low F‐MWNT contents (≤3 wt %) exhibit much better thermomechanical values than pure PP. The gas permeability of the hybrids was found to decrease linearly with increases in the F‐MWNT content of the PP matrix. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Structure–property relationships in polyamide 6/multi‐walled carbon nanotubes nanocomposites

Polyamide 6 (PA6)/multi‐walled carbon nanotubes (MWCNT) nanocomposites were produced by diluting a masterbach containing 20 wt % nanotubes using melt mixing. The influence of the addition of well dispersed MWCNT (as indicated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM)) on the thermal transitions, and crystallization behavior of the PA6 matrix is investigated. Differential scanning calorimetry (DSC) results show a reduction in heat capacity jump at the glass transition which is interpreted by an immobilized interfacial layer near the nanotubes. Furthermore, both DSC and X‐ray diffraction (XRD) measurements indicate that nanotubes favor the formation of the α crystalline form of PA6. These findings are correlated with the observed improvement of the storage modulus as revealed by dynamic mechanical thermal analysis (DMTA). Additionally, a new crystallization peak appears when MWCNT are added, and is attributed to the formation of a different morphology of the same type crystallite around the nanotubes walls (trans‐crystallinity). Finally, water sorption measurements show an increase of water content, normalized to the amorphous polymer fraction, in the nanocomposites. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 764–774, 2009     

Microstructure and fracture behavior of semicrystalline polymer–clay nanocomposites

The relationships between the microstructure and the fracture behavior of three polymer/clay nanocomposites were studied. Two different polymer matrices were chosen, namely polyamide‐6 and polyethylene (compatibilized with PE‐g‐MA or PE‐g‐PEo), to reach very different clay dispersion states. The microstructure was characterized in terms of polymer crystallinity, orientation of the polymer crystalline lamellae, clay dispersion state, and orientation of the clay tactoids. The mechanical behavior was characterized by tensile tests. The essential work of fracture (EWF) concept was used to determine the fracture behavior of the nanocomposites. Both tensile and EWF tests were performed in two perpendicular directions, namely longitudinal and transversal. It is shown that the fracture behaviors of the matrices mainly depend on the polymer crystalline lamellae orientation. For the nanocomposites, the relationships between the matrix orientation, the clay dispersion states, the values of the EWF parameters (w_e and βw_p), and their anisotropy are discussed. The results show that the lower the average clay tactoid thickness, the lower is the decrease of fracture performance for the nanocomposite and the more consumed energy as longer the path of the crack. Besides, a linear dependence of the anisotropy of the EWF parameters of the nanocomposites on the average clay aspect ratio is found. The more exfoliated the structure is, the less pronounced the anisotropy of the EWF parameters. Interestingly, it is thought that the average clay aspect ratio is the parameter representing the clay dispersion state that governs the fracture anisotropy of the nanocomposites (as the elastic properties determined by tensile tests). © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1820–1836, 2008     

Structure‐property relationships in exfoliated polyisoprene/clay nanocomposites

Structure‐property relationships in exfoliated polyisoprene (PI)/clay nanocomposites have been studied as a function of the clay concentration with rheometry, X‐ray diffraction, small‐angle X‐ray scattering, and transmission electron microscopy. The results presented here indicate that the interlayer spacing of layered silicates increases from 2 to at least approximately 14 nm because of the penetration of polymer molecules into the spacing between the silicate layers. The average aspect ratio (width/thickness) of the dispersed nanoplates is also estimated to be at least approximately 80. Additionally, the storage modulus of the nanocomposite exhibits frequency‐independent pseudo‐solidlike behavior above the percolation threshold [volume fraction of clay at the percolation threshold (?_p) = 0.02] and shows large enhancements (up to approximately six orders of magnitude) in comparison with the storage modulus of PI when the volume fraction of clay (?) is greater than ?_p. For the shear‐aligned PI/clay nanocomposites, an increase in the storage modulus with shear alignment is observed at ? < ?_p, whereas a decrease in the storage modulus is observed for ? > ?_p. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1000–1009, 2004     

Synthesis and characterization of polyethylene/clay–silica nanocomposites: A montmorillonite/silica‐hybrid‐supported catalyst and in situ polymerization

A novel approach to the preparation of polyethylene (PE) nanocomposites, with montmorillonite/silica hybrid (MT‐Si) supported catalyst, was developed. MT‐Si was prepared by depositing silica nanoparticles between galleries of the MT. A common zirconocene catalyst [bis(cyclopentadienyl)zirconium dichloride/methylaluminoxane] was fixed on the MT‐Si surface by a simple method. After ethylene polymerization, two classes of nanofillers (clay layers and silica nanoparticles) were dispersed concurrently in the PE matrix and PE/clay–silica nanocomposites were obtained. Exfoliation of the clay layers and dispersion of the silica nanoparticles were examined with transmission electron microscopy. Physical properties of the nanocomposites were characterized by tensile tests, dynamic mechanical analysis, and DSC. The nanocomposites with a low nanofiller loading (<10 wt %) exhibited good mechanical properties. The nanocomposite powder produced with the supported catalyst had a granular morphology and a high bulk density, typical of a heterogeneous catalyst system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 941–949, 2004     

Polymer blend nanocomposites: effect of mercapto silane modified kaolin clay on the thermal properties of Polypropylene/Polystyrene blend

Nanocomposites based on polypropylene/polystyrene blends were prepared by melt mixing in a Thermo Haake Rheochord mixer. The effect of mercapto silane modified kaolin clay on the properties of nanocomposites has been studied. The characterization of polypropylene/polystyrene/clay nanocomposites was made by dynamic mechanical analysis, scanning electron microscope, and transmission electron microscopic, and the thermal stability was determined by using Thermogravimetric analysis. The activation energy of degradation was determined using three mathematical models, namely Horowitz–Metzger, Coats–Redfern and Broido's methods, and the results were compared. TGA results show an improved thermal stability for nanocomposite than the pure blend. The improvement in thermal stability of nanocomposites was confirmed by increasing the activation energy. Transmission electron microscopic observations showed that nanoclay layers were intercalated on the polymer matrix and were located at the interface between the two polymers Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of polyurethane‐urea clay nanocomposites using montmorillonite modified by oxyethylene–oxypropylene copolymer

Clay organifier with propylene oxide‐capped polyethylene glycol (PEG) with amine end group (jeffamines ED_600–2003) was synthesized through an ion exchange process between sodium cations in montmorillonite (MMT) and ? NH groups in ED_600–2003. The d‐spacing of organoclay was found to be 1.697–1.734 nm compared to 0.96 nm of pristine MMT. Transmission electron microscopy (TEM) was used to determine the molecular dispersion of the clay within ED₆₀₀. Polyurethane‐urea/montmorillonite (PUU‐MMT) nanocomposites were prepared via in situ polymerization from polyethylene glycol (PEG 400) or 1,4 butane diol (1,4 BD), toluene diisocyanate (TDI), jeffamines ED_600–2003, and 1–12 wt% of organoclay. Intercalation of PUU into modified clays was confirmed by X‐ray diffraction (XRD), scanning electron microscopy, and TEM. The barrier properties were significantly reduced; however, the thermal stability was increased in the nanocomposites as compared to the pristine polymer. Nanocomposites exhibited optical clarity and solvent resistance. The mechanical properties and the glass transition temperature of PUU were improved with the addition of organoclay. The incorporation of silicate layers gave rise to a considerable increase in the storage modulus (stiffness), demonstrating the reinforcing effect of clay on the PUU matrix. Copyright © 2009 John Wiley & Sons, Ltd.