Thermal dissociation behavior of copolymers bearing hemiacetal ester moieties and their reactions with epoxides

Copolymers from 1‐propoxyethyl methacrylate and various vinyl monomers such as n‐butyl methacrylate and styrene were synthesized, and the thermal dissociation reaction of the copolymers containing the hemiacetal ester structure was examined. The copolymers, having the ability of thermal dissociation, could control the thermal dissociation temperature because of the bulkiness and flexibility of the vinyl comonomers, the copolymer compositions, and so on. Furthermore, the possibility of control of the initiation in thermally latent addition with epoxides in the case of copolymers was also studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3966–3977, 2006     

Synthesis and thermal dissociation of polymers having hemiacetal ester moieties

Polymers having hemiacetal ester moieties in the side chain were synthesized and their thermal dissociation was examined. 1‐Alkoxyethyl methacrylates (1) were synthesized from methacrylic acid with alkyl vinyl ethers and their radical copolymerizations with butyl methacrylate were carried out at 80°C for 6.5 h using AIBN as an initiator to afford the corresponding copolymers having the hemiacetal ester moieties in the side chain. The hemiacetal ester moieties in the copolymers thermally converted to carboxyl groups with elimination of the corresponding vinyl ethers. The thermal dissociation of the hemiacetal ester moieties in the side chain obeyed first‐order kinetics at 140°C, and their reactivities were in the following order: 1‐(tert‐butoxy)ethyl > 1‐isopropoxyethyl > 1‐ethoxyethyl > 1‐butoxyethyl ester. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 609–614, 1999     

Thermally latent synthesis of networked polymers from multifunctional hemiacetal ester and diepoxide catalyzed by Schiff‐base‐zinc chloride complex

Thermally latent reaction of a copolymer ( P1 ) bearing hemiacetal ester and n‐butyl methacrylate moieties and glycidyl phenyl ether ( 2 ) was catalyzed by bis(p‐methoxybenzylidene)‐1,2‐diiminoethane/zinc chloride complex (ZnCl₂/ 3 ) at 30–150 °C for 6 h. No reaction of P1 and 2 took place below 70 °C, and it smoothly proceeded above 120 °C. The latencies and activities mean that ZnCl₂/ 3 meets both the high latencies at ambient conditions and the high activities at desired temperatures. Thermal crosslinking reaction employing multifunctional derivatives was carried out using ZnCl₂/ 3 at 140 °C for 6 h to afford a networked polymer in high yields. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3682–3689, 2008     

Model reaction for thermally latent curing through addition of hemiacetal ester and epoxide by schiff‐base–zinc halide complexes

Schiff‐base–zinc halide complexes (ZnX₂/ 1 ) thermal‐latently catalyze the reaction of glycidyl phenyl ether (2) and 1‐propoxyethyl 2‐ethylhexanoate (3) that proceeds at moderately elevated temperatures. The catalysis by the ZnX₂/ 1 complexes proceeds via the thermal dissociation of 3 to produce the corresponding carboxylic acid that nucleophilically attacks 2 predominantly over the thermally dissociated vinyl ether. ZnX₂/ 1 complexes catalyze both the dissociation of 3 to produce the carboxylic acid intermediate and its addition to 2 . Although conventional latent catalysts for this reaction exhibit Lewis acidities under ambient conditions that are responsible to the gradual degradation of hemiacetal esters and the polymerization of epoxides, a mixture of 2 , 3 , and ZnX₂/ 1 can be stored for 3 months at ambient conditions. The stored mixture is as active as the freshly prepared mixture, keeping the excellent activity and latency of ZnX₂/ 1 . As well as the model reaction, the thermally latent polyaddition of bisphenol A diglycidyl ether (9) and di‐1‐propoxyethyl adipate (10) is also promoted with ZnCl₂/ 1 at a moderate elevated temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3370–3379, 2007     

Synthesis of twin‐tail tadpole‐shaped hydrophilic copolymers and their thermo‐responsive behavior

Twin‐tail tadpole‐shaped hydrophillic copolymers composed of cyclic poly(ethylene gycol) (PEG) and two linear poly(N‐isopropylacrylamide) (PNIPAM) chains have been successfully synthesized by the combination of single‐electron‐transfer living radical polymerization and click chemistry under high concentration. Click cycloaddition reaction occurred between linear PNIPAM‐b‐PEG‐b‐PNIPAM with two azide groups at block junctions and dipropargyl oxalylate with high yield and efficiency. The resulting intermediates and the targeted polymers were characterized by proton nuclear magnetic resonance, fourier transform infrared spectroscopy, and gel permeation chromatography. The thermal phase transition behaviors of twin‐tail tadpole‐shaped polymers and their linear precursors were investigated by temperature‐dependent turbidity measurements, micro differential scanning calorimetry, and laser light scattering. The twin‐tail tadpole‐shaped polymers possess higher critical solution temperature (LCST) and smaller average aggregate size compared with their linear precursors with the same molecular weight. The above differences in the thermal phase transition behaviors should be due to the repulsive forces caused by the ring topology, which prohibited the intermolecular association. © 2009 Wiley Periodicals, © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Tuning amphiphilicity/temperature‐induced self‐assembly and in‐situ disulfide crosslinking of reduction‐responsive block copolymers

New poly(ethylene oxide)‐based block copolymers (ssBCs) with a random copolymer block consisting of a reduction‐responsive disulfide‐labeled methacrylate (HMssEt) and a thermoresponsive di(ethylene glycol)‐containing methacrylate (MEO₂MA) units were synthesized. The ratio of HMssEt/MEO₂MA units in the random P(MEO₂MA‐co‐HMssEt) copolymer block enables the characteristics of well‐defined ssBCs to be amphiphilic or thermoresponsive and double hydrophilic. Their amphiphilicity or temperature‐induced self‐assembly results in nanoaggregates with hydrophobic cores having different densities of pendant disulfide linkages. The effect of disulfide crosslinking density on morphological variation of disulfide‐crosslinked nanogels is investigated. In response to reductive reactions, the partial cleavage of pendant disulfide linkages in the hydrophobic cores converts the physically associated aggregates to disulfide‐crosslinked nanogels. The occurrence of in‐situ disulfide crosslinks provides colloidal stability upon dilution. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2057–2067     

One‐pot synthesis of linear‐hyperbranched diblock copolymers via self‐condensing vinyl polymerization and ring opening polymerization

The linear poly(ε–caprolacton)‐b‐hyperbrached poly(2‐((α‐bromobutyryl)oxy)ethyl acrylate) (LPCL‐b‐HPBBEA) has been successfully synthesized by simultaneous ring‐opening polymerization (ROP) of CL and self‐condensing vinyl polymerization (SCVP) of BBEA in one‐pot. The HPBBEA homopolymers were found to be formed in the polymerization because of the competitive reactions induced by initiation with bifunctional initiator, 2‐hydroxylethyl‐2′‐bromoisobutyrate (HEBiB), and inimer BBEA. The separation of LPCL‐b‐HPBBEA from the polymerization products was achieved by precipitation in methanol. With feed ratio increase of CL and BBEA to HEBiB, the molecular weights of PCL and HPBBEA blocks in the block copolymer enhanced; and the polymerization rate of CL started to decrease gradually after 12 h of polymerization, but the polymerization rate of BBEA was maintained until 24 h of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7628–7636, 2008     

Synthesis and self‐assembly of diblock copolymers bearing 2‐nitrobenzyl photocleavable side groups

The light‐responsive behavior in solution and in thin films of block copolymers bearing 2‐nitrobenzyl photocleavable esters as side groups is discussed in this article. The polymers were synthesized by grafting 2‐nitrobenzyl moieties onto poly(acrylic acid)‐block‐polystyrene (PAA‐b‐PS) precursor polymers, leading to poly(2‐nitrobenzyl acrylate‐random‐acrylic acid)‐block‐polystyrene (P(NBA‐r‐AA)‐b‐PS) block copolymers. The UV irradiation of the block copolymers in a selective solvent for PS led to the formation of micelles that were used to trap hydrophilic molecules inside their core (light‐induced encapsulation). In addition, thin films consisting of light‐responsive P(NBA‐r‐AA) cylinders surrounded by a PS matrix were achieved by the self‐assembly of P(NBA‐r‐AA)‐b‐PS copolymers onto silicon substrates. Exposing these films to UV irradiation generates nanostructured materials containing carboxylic acids inside the cylindrical nanodomains. The availability of these chemical functions was demonstrated by reacting them with a functional fluorescent dye. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Statistical copolymers of methyl methacrylate and 2‐methacryloyloxyethyl ferrocenecarboxylate: Monomer reactivity ratios,thermal and electrochemical properties

Statistical copolymers of methyl methacrylate (MMA) with 2‐methacryloyloxyethyl ferrocenecarboxylate (MAEFC) were prepared by free radical polymerization. The reactivity ratios were estimated using the Fineman‐Ross, inverted Fineman‐Ross, Kelen‐Tüdos, and extended Kelen‐Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. The glass‐transition temperature (T_g) values of the copolymers were measured and examined by means of several theoretical equations, allowing the prediction of these T_g values. The thermal degradation behavior of the copolymers was also studied and compared with the respective homopolymers. Cyclic voltammetry was employed to study the electrochemical properties of the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Well‐defined poly(oxazoline)‐b‐poly(acrylate) amphiphilic copolymers: From synthesis by polymer–polymer coupling to self‐organization in water

In this contribution, we report on the self‐assembly in water of original amphiphilic poly(2‐methyl‐2‐oxazoline)‐b‐poly(tert‐butyl acrylate) copolymers, synthesized by copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction. For such purpose, (poly(2‐methyl‐2‐oxazoline)) and (poly(tert‐butyl acrylate)) are first prepared by cationic ring‐opening polymerization and atom transfer radical polymerization, respectively. Well‐defined polymeric building blocks, ω‐N₃‐P(t‐BA) and α‐alkyne‐P(MOx), bearing reactive chain end groups, are accurately characterized by matrix‐assisted laser desorption ionization time‐of‐flight spectroscopy. Then, P(MOx)_n‐b‐P(t‐BA)_m are achieved by polymer–polymer coupling and are fully characterized by diffusion‐ordered NMR spectroscopy and size exclusion chromatography, demonstrating the obtaining of pure amphiphilic copolymers. Consequently, the latter lead to the formation in water of well‐defined monodisperse spherical micelles (R_H = 40–60 nm), which are studied by fluorescence spectroscopy, static light scattering, atomic force microscope, and transmission electronic microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Thermally latent polyaddition and curing of Di‐ and tri‐functional hemiacetal esters with diepoxide by salen‐zinc complex with tunable catalytic activity and model and networking reactions

Salen‐zinc complexes (Zn/ 1 _R ) thermal‐latently catalyzed the polyaddition of a diepoxide ( 2 ) with a difunctional hemiacetal ester ( 3 ), which proceeded at moderate temperatures (100–150 °C) for curing of mixtures containing monomers and initiators. The catalytic activities of Zn/ 1 _R depended on the Lewis acidities of the complexes controlled by the electronic character of the salen ligands. For example, Zn/ 1 _3,5‐Cl bearing four electron‐withdrawing chlorine atoms initiated the polyaddition at the lowest temperature (100 °C), and Zn/ 1 _OMe bearing two electron‐donating methoxy groups initiated the polyaddition at 120 °C. The Lewis acidities of the complexes were evaluated by NMR and IR spectroscopies and computational calculation. The polyadditions with the salen‐zinc complexes proceeded quantitatively at 150 °C, and the use of a tri‐functional hemiacetal ester ( 7 ) with 2 afforded the corresponding networked polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1427–1439, 2008     

Synthesis,self‐assembly,and thermosensitive properties of ethyl cellulose‐g‐P(PEGMA) amphiphilic copolymers

Ethyl cellulose graft poly(poly(ethylene glycol) methyl ether methacrylate) (EC‐g‐P(PEGMA)) amphiphilic copolymers were synthesized via atom transfer radical polymerization (ATRP) and characterized by FTIR, ¹H NMR, and gel permeation chromatography. Reaction kinetics analysis indicated that the graft copolymerization is living and controllable. The self‐assembly and thermosensitive property of the obtained EC‐g‐P(PEGMA) amphiphilic copolymers in water were investigated by dynamic light scattering, transmission electron microscopy, and transmittance. It was found that the EC‐g‐P(PEGMA) amphiphilic copolymers can self‐assemble into spherical micelles in water. The size of the micelles increases with the increase of the side chain length. The spherical micelles show thermosensitive properties with a lower critical solution temperature around 65 °C, which almost independent on the graft density and the length of the side chains. The obtained EC‐g‐P(PEGMA) graft copolymers have both the unique properties of poly(ethylene glycol) and cellulose, which may have the potential applications in biomedicine and biotechnology. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 46: 6907–6915, 2008     

Thermally latent reaction of hemiacetal ester with epoxide catalyzed by recyclable polymeric catalyst consisting of salen‐zinc complex and polyurethane main chain

This article describes the synthesis of and catalysis with a polymeric catalyst (Zn/ 1_NHCOO ) carrying salen‐zinc complex structure in the main chain prepared from polyaddition of zinc/bis(4‐hydroxy)salicylidene‐1,2‐diiminoethane and 4,4′‐diphenylmethane diisocyanate. Poly(Zn/ 1_NHCOO ) promoted the reaction of glycidyl phenyl ether (2) with 1‐propoxyethyl‐2‐ethylhexanoate (3) only at moderately elevated temperatures. Poly(Zn/ 1_NHCOO ) can be recycled by simple filtration from the reaction mixtures, and the recycled polymer is as active as the freshly prepared one. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3673–3681, 2008     

Amphiphilic star‐block copolymers based on a hyperbranched core: Synthesis and supramolecular self‐assembly

Novel amphiphilic star‐block copolymers, star poly(caprolactone)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] and poly(caprolactone)‐block‐poly(methacrylic acid), with hyperbranched poly(2‐hydroxyethyl methacrylate) (PHEMA–OH) as a core moiety were synthesized and characterized. The star‐block copolymers were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization (ATRP). First, hyperbranched PHEMA–OH with 18 hydroxyl end groups on average was used as an initiator for the ring‐opening polymerization of ε‐caprolactone to produce PHEMA–PCL star homopolymers [PHEMA = poly(2‐hydroxyethyl methacrylate); PCL = poly(caprolactone)]. Next, the hydroxyl end groups of PHEMA–PCL were converted to 2‐bromoesters, and this gave rise to macroinitiator PHEMA–PCL–Br for ATRP. Then, 2‐dimethylaminoethyl methacrylate or tert‐butyl methacrylate was polymerized from the macroinitiators, and this afforded the star‐block copolymers PHEMA–PCL–PDMA [PDMA = poly(2‐dimethylaminoethyl methacrylate)] and PHEMA–PCL–PtBMA [PtBMA = poly(tert‐butyl methacrylate)]. Characterization by gel permeation chromatography and nuclear magnetic resonance confirmed the expected molecular structure. The hydrolysis of tert‐butyl ester groups of the poly(tert‐butyl methacrylate) blocks gave the star‐block copolymer PHEMA–PCL–PMAA [PMAA = poly(methacrylic acid)]. These amphiphilic star‐block copolymers could self‐assemble into spherical micelles, as characterized by dynamic light scattering and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6534–6544, 2005     

Functional 1,3‐benzoxazine bearing 4‐pyridyl group: Synthesis and thermally induced polymerization behavior

1,3‐benzoxazine 1 , bearing 4‐pyridyl moiety on the nitrogen atom, was synthesized from p‐cresol, 4‐aminopyridine, and paraformaldehyde. The efficient synthesis was achieved by adding acetic acid to suppress the strong basicity caused by the presence of 4‐aminopyridine derivatives. Upon heating 1 at 180 °C, it underwent the thermally induced ring‐opening polymerization. The resulting polymer was composed of two types of repeating unit, i.e., (1) Mannich‐type one (‐phenol‐CH₂‐NR‐CH₂‐) that can be expected from the general ring‐opening polymerization of conventional benzoxazines and (2) a typical phenolic resin‐type one (‐phenol‐CH₂‐phenol‐) induced by release of 4‐aminopyridine and paraformaldehyde (unit B). Another structural feature of the polymer was that it possessed a benzoxazine moiety at the chain end. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 410–416     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and radical polymerization properties of thermal radical initiators based on o‐imino‐isourea: The effect of the alkyl side chain on the radical initiation temperature

Four types of thermal radical initiators (TRIs) that are based on o‐imino‐isourea with cyclohexyl and isopropyl groups were successfully synthesized, namely, C‐HexDCC, DiiprDCC, C‐HexDIC, and DiiprDIC. The free radical polymerization and thermal properties of those synthesized TRIs were determined via differential scanning calorimetry (DSC) (using n‐butyl acrylate) and thermogravimetric analysis (TGA), respectively. The TRI derivatives showed peak temperatures (T_max) from 89 to 97 °C in n‐butyl acrylate, and DiiprDIC, with isopropyl groups on both sides of the N O group, showed the lowest peak temperatures. The rates of N O bond homolysis (k_d) of all the TRIs were calculated from their half‐lives determined using real‐time nuclear magnetic resonance (NMR) spectroscopy, and their theoretical bond dissociation energies (BDEs) were calculated using density functional theory (DFT) calculations. The free radical polymerization of n‐butyl acrylate using each TRI was efficiently determined from T_peak of the DSC curves; conversions depending on polymerization temperature (80, 90, and 100 °C) were monitored to observe kinetic information of TRIs during polymerization. Furthermore, to investigate the use of TRIs in curing, we applied them to an automotive clear coating system and monitored the real‐time evolution of the elastic modulus (G′) during thermal curing using a rheometer for representative DiiprDIC. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1749–1756     

Preparation of amphiphilic diblock copolymers with pendant hydrophilic phosphorylcholine and hydrophobic dendron groups and their self‐association behavior in water

Generation 3.5 poly(amido amine) dendron (G3.5) with 16 n‐butyl terminal groups containing an acrylamide monomer (AaUG3.5) was prepared by condensation between an amino focal group in G3.5 and 11‐acrylamidoundecanoic acid. AaUG3.5 was polymerized using poly(2‐methacryloyloxyethyl phosphorylcholine) (pMPC)‐based macro‐chain transfer agent via reversible addition‐fragmentation chain transfer (RAFT) radical polymerization to obtain amphiphilic diblock copolymers with different compositions. The diblock copolymers (P_mD_n) were composed of a hydrophilic pMPC block and hydrophobic pendant dendron‐bearing block, where P and D represent pMPC and pAaUG3.5, respectively, and m and n represent the degree of polymerization for each block, respectively. P₂₉₆D₁ and P₉₈D₃ formed vesicles and large compound micelles and vesicles, respectively, which was confirmed by light scattering measurements and transmission electron microscopic (TEM) observations. The large compound micelles formed from P₉₈D₃ could not incorporate hydrophilic guest polymer molecules, because the aggregates did not have a hydrophilic hollow core. In contrast, the vesicles formed from P₂₆₉D₁ could incorporate hydrophilic guest polymer molecules into the hollow core. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4923–4931     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011