Structural and phenomenological study on the cationic curing of mixtures of epoxy resin and 5,5‐dimethyl‐1,3‐dioxane‐2‐one

Ytterbium and lanthanum triflates were used as initiators to cure a mixture of diglycidylether of bisphenol A (DGEBA) and 5,5‐dimethyl‐1,3‐dioxane‐2‐one (DMTMC). The evolution of the curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing process. We observed the formation of a five‐membered cyclic carbonate, which remains unreacted at the chain ends because of an equilibrium process between the spiroortho carbonates that had formed as intermediate species and also the loss of CO₂, which was quantified by thermogravimetry. The kinetics were studied by DSC and analyzed by isoconversional procedures. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the thermosets obtained. The phenomenological changes that take place during curing were studied and represented in a time‐temperature‐transformation (TTT) diagram. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4546–4558, 2006     

Improved thermosets obtained from cycloaliphatic epoxy resins and γ‐butyrolactone with lanthanide triflates as initiators. I. Study of curing by differential scanning calorimetry and Fourier transform infrared

3,4‐Epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate was cured with different proportions of γ‐butyrolactone with lanthanum, samarium, and ytterbium triflates as catalysts. The curing was studied with differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the epoxide, lactone, and intermediate spiroorthoester groups. The glass‐transition temperature of the crosslinked materials was high and increased when the proportion of lactone decreased. The kinetics were studied with DSC experiments and were analyzed with isoconversional procedures. The differences in the reactivities of the systems were related to the Lewis acidity of the lanthanide salt used as the initiator. An increase in the proportion of lactone produced an increase in the reaction rate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2337‐2347, 2005     

Cationic copolymerization of diglycidyl ether of bisphenol A with phthalide or 3,3′‐diphtalide catalyzed by lanthanide triflates

Mixtures of the diglycidylether of bisphenol A (DGEBA) and phthalide (PT) or 3,3′‐diphthalide (DPT) were cured using ytterbium or lanthanum triflate as catalyst. The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and quantify the evolution of the epoxide and lactone groups. The T_g of the crosslinked materials increased when the proportion of lactone in the curing mixture decreased. The kinetics was studied with DSC experiments and isoconversional procedures. The differences in the reactivity of the systems were related to the Lewis acidity of the lanthanide salt used as initiator. The increase in the proportion of lactone leads to an increase in the reaction rate. The shrinkage was determined from the densities before and after curing and its evolution was studied by thermomechanical analysis. The materials obtained were characterized by thermogravimetry and dynamic mechanical thermal analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1711–1721, 2006     

N,N‐dimethylaminopyridine as initiator in the copolymerization of diglycidylether of bisphenol A with six‐membered cyclic carbonates

N,N‐Dimethylaminopyridine (DMAP) was used as initiator to cure mixtures of diglycidylether of bisphenol A (DGEBA) and 1,3‐dioxan‐2‐one (TMC) or 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DMTMC). The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing. We observed the formation of five‐membered cyclic carbonates and anionic carbonate groups that remain unreacted at the chain ends. The formation of these groups was explained by the attack of the anionic propagation species on the methylene carbon of the carbonate group, which leads to an alkyl‐oxygen rupture. By performing the cure in the thermobalance we could evaluate the loss of CO₂ produced in the samples containing carbonates. The kinetics were studied by DSC and analyzed with isoconversional procedures. The addition of carbonates slows down the curing rate. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the materials obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2873–2882, 2006     

Cationic copolymerization of cycloaliphatic epoxy resin with a spirobislactone with lanthanum triflate as initiator: I. Characterization and shrinkage

3,4‐Epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (ECH) was cured with different proportions of 1,6‐dioxaspiro [4,4]nonane‐2,7‐dione (s(γ‐BL)) using lanthanum triflate as a catalyst. The shrinkage undergone during curing was monitored by means of thermomechanical analysis (TMA) in isothermal experiments. Fourier transform infrared spectroscopy in attenuated‐total‐reflection mode (FTIR/ATR) was used to study the evolution of lactone, epoxide, and intermediate spiroorthoester (SOE) groups to identify the different reactions that take place during the curing process. DSC was used to study the thermal characteristics of the curing process and to assess the glass‐transition temperature (T_g) of the cured material. The dynamic mechanical properties of the cured material were determined based on the data obtained by DMTA. An increase in the proportion of s(γ‐BL) led to a decrease in the gelation time and the shrinkage after gelation. By combining the data obtained by TMA and FTIR/ATR, it was also possible to identify the reactive processes responsible for the shrinkage. It was observed that an increase in the proportion of s(γ‐BL) also increases the speed of the curing process and modifies the structure of the material, thus giving rise to more flexible materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3421–3432, 2005     

New poly(ether‐ester) thermosets obtained by cationic curing of DGEBA and 7,7‐dimethyl‐6,8‐dioxaspiro[3.5] nonane‐5,9‐dione with several Lewis acids as initiators

Scandium, ytterbium, and lanthanum triflates and boron trifluoride monoethylamine were used as cationic initiators to cure a mixture 2:1 (mol/mol) of diglycidylether of bisphenol A (DGEBA) and 7,7‐dimethyl‐6,8‐dioxaspiro[3.5]nonane‐5,9‐dione (MCB). The evolution of the epoxy and lactone during curing and the linear ester groups in the final materials were evaluated by Fourier Transform Infrared in the attenuated‐total‐reflection mode. The kinetic parameters of the curing process were calculated from DSC analysis applying isoconversional procedures. The shrinkage on curing and the thermal degradability of the materials on varying the initiator used were evaluated. The expandable character of MCB was confirmed. The materials obtained were more degradable than conventional epoxy resins due to the tertiary ester groups incorporated in the network by copolymerization. © 2008 Wiley Periodicals, Inc J Polym Sci Part A: Polym Chem 46: 1229–1239, 2008     

Fractionation of ethylene/1‐pentene copolymers using a combination of SEC‐FTIR and SEC‐HPer DSC

The short chain branching distribution (SCBD) and thermal properties of ethylene/1‐pentene copolymers were studied using SEC‐FTIR and SEC‐HPer DSC. The copolymers, synthesized with Cp₂ZrCl₂/MAO, were fractionated using size exclusion chromatography (SEC). The infrared analysis of the fractions showed that the copolymers had—on average—higher 1‐pentene concentration in the low molecular weight range. Furthermore, the thermal properties of the SEC deposits of these copolymers on a Germanium disc were studied using high performance differential scanning calorimetry (HPer DSC). Single SEC separations were used to accumulate fractions in the microgram range that were directly analyzed with regard to their thermal properties, thus allowing us to study SCBD as well as thermal behavior simultaneously. When these fractions (with masses ranging from 10–80 μg) were analyzed using HPer DSC, good melting and crystallization temperature distributions were obtained, proving that HPer DSC can be used as a complementary method to SEC‐FTIR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2956–2965, 2007     

Novel thermosets obtained by UV‐induced cationic copolymerization of DGEBA with an spirobislactone

The photocuring process of the diglycidyl ether of bisphenol A (DGEBA) with the bislactone 1,6‐dioxaspiro[4,4]nonane‐2,7‐dione (s(γ‐BL)) was studied. Triarylsulfonium hexafluoroantimonate was employed as photoinitiator. FTIR/ATR was used to study the evolution of epoxy, lactone, and intermediate spiroorthoester groups to identify the different reactions that take place during the photocuring process. Photo‐DSC and DSC were used to study the thermal evolution of the photocuring process and to assess the T_g of the fully cured material. Thermogravimetric analysis (TGA) was used to determine the thermal stability of the fully cured material. The thermomechanical properties of the materials were investigated using dynamic mechanical‐thermal analysis. Shrinkage undergone during photocuring and gelation was studied with TMA. A strong influence of the photocuring temperature on the photocuring process of the DGEBA‐ s(γ‐BL) system was observed. Differences in the reactivity of the different species were observed with respect to the thermally cured system using ytterbium triflate as cationic thermal initiator. As a consequence, photocured materials exhibited a superior thermal stability and lower flexibility. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5446–5458, 2007     

Copolymerization of diglycidyl ether of bisphenol A with γ‐butyrolactone catalyzed by ytterbium triflate: Shrinkage during curing

Diglycidyl ether of bisphenol A (DGEBA) was cured with γ‐butyrolactone (γ‐BL) with ytterbium triflate as a catalyst. The curing was studied with differential scanning calorimetry, Fourier transform infrared (FTIR), and thermomechanical analysis. FTIR studies confirmed that four elemental reactions took place during the curing process: the formation of a spiroorthoester (SOE) by the reaction of DGEBA with γ‐BL, the homopolymerization of SOE, the homopolymerization of DGEBA, and the copolymerization of SOE and DGEBA. Moderate proportions of γ‐BL produced materials with higher glass‐transition temperatures, and the curing occurred with lower shrinkage after gelation because of the polymerization of SOE, with near‐zero shrinkage during the final stages of the curing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2794–2808, 2003     

Microwave‐assisted synthesis of a novel phosphorus‐containing spiroorthoester,characterization and cationic polymerization

A new phosphorus‐containing spiroorthoester, (1,4,6‐trioxaspiro [4,4] nonan‐2‐yl)‐methyl 3‐[10‐(9,10‐dihydro‐9‐oxa‐9‐phosphaphenanthrene‐10‐oxide)]‐propanoate (SOE‐P), was synthesized under microwave irradiation with a short reaction time (1 h), because classical thermal heating did not lead to the desired product. The structure of the new monomer was confirmed by ¹H, ¹³C, and ³¹P. SOE‐P was homopolymerized and copolymerized with phenylglycidyl ether with ytterbium triflate as a cationic initiator in DSC experiments. These reactions were monitored by FTIR/ATR, and the formation of poly(ether‐ester)s with a pendant bulky phosphorylated group was shown. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4722–4730, 2006     

Concerted reactions of aldehyde groups during polymerization of an aldehyde‐functional benzoxazine

Polymerization reactions of a new aldehyde‐functional benzoxazine (4HBA‐a) were investigated in detail. The curing behavior of 4HBA‐a was studied by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) methods. The results indicate that the disappearance of the aldehyde group from 4HBA‐a and the ring‐opening reaction of 4HBA‐a occur simultaneously. Gases evolved during the curing process of 4HBA‐a were analyzed by thermogravimetric analyzer interfaced with FTIR spectra. The elimination of CO₂ is attributed to the oxidation and decarboxylation of the aldehyde groups. In addition, the crosslink sites of the aldehyde groups in the polymer structure are confirmed by model reactions. A possible reactive position should be sited in ortho position of phenol rather than ortho and/or para positions of N‐phenyl ring. Finally, the crosslinked structures of polymerized 4HBA‐a have been proposed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Isoconversional method to explore the cure reaction mechanisms and curing kinetics of DGEBA/EMI‐2,4/nano‐SiC system

The curing kinetics of the diglycidyl ether of bisphenol‐A (DGEBA)/2‐ethyl‐4‐methylimidazole (EMI‐2,4)/nano‐sized carborundum (nano‐SiC) system was studied by means of nonisothermal differential scanning calorimetry (DSC). An isoconversional method of kinetic analysis yields a dependence of the effective activation energy E on the extent of conversion that decreases initially, and then increases as the cure reaction proceeds. The variations of E were used to study the cure reaction mechanisms, and the Shrinking Core Model was used to study the resin–particle reaction. The results show that the presence of nano‐SiC particles prevents the occurrence of vitrification, as well as inhibits the cure reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 371–379, 2006     

Studies on the modification of poly(ω‐bromoalkyl‐1‐glycidylether)s with 4′‐methoxybiphenyl‐4‐oxy mesogenic groups

A series of poly[ω‐(4′‐methoxy‐biphenyl‐4‐oxy)alkyl‐1‐glycidylether]s were synthesized by chemically modifying the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐hydroxy‐4′‐methoxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yields and almost quantitative degrees of modification. They were all insoluble in THF and other common solvents. Characterization by ¹³C NMR confirmed that all the polymers had the expected structure. The liquid crystalline behavior of the polymers was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction studies. Polymers that had alkyl spacers with n = 2 and 4 were smectic C, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C again. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5998–6006, 2005     

Novel silicon‐containing spiroorthoester to confer combined flame retardancy and low shrinkage properties to epoxy resins

A new silicon‐containing spiroorthoester, 1,4,6‐trioxaspiro [4,4]‐2‐nonylmethyl 3‐trimethylsilyl propionate (SOE? Si), was synthesized with good yield by an esterification reaction with a previously synthesized 2‐hydroxymethyl‐1,4,6‐trioxaspiro [4,4] nonane (SOE? OH) and trimethylsilyl propionic acid. The structure of the new SOE? Si was confirmed by ¹H and ³C NMR. The SOE? Si and a mixture of DGEBA/SOE? Si were polymerized with ytterbium triflate as a cationic initiator. The curing was studied with differential scanning calorimetry (DSC) and monitored by Fourier transform infrared (FTIR) spectroscopy. The materials were characterized with DSC, termogravimetric analysis (TGA) and thermodynamomechanical analysis (DMTA). The volume change was evaluated with a Micromeritics gas pycnometer and the flame retardancy was tested by the limiting oxygen index (LOI) measurements. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4211–4224, 2007     

Hyperbranched fluorocopolymers by atom transfer radical self‐condensing vinyl copolymerization

Hyperbranched fluorocopolymers were synthesized by the atom transfer radical self‐condensing vinyl copolymerization (ATR–SCVCP) of an inimer, either p‐chloromethylstyrene (CMS) or p‐bromomethylstyrene (BMS), with 2,3,4,5,6‐pentafluorostyrene (PFS), with 2,2′‐bipyridine together with CuCl or CuBr as the ligand/catalyst system. The reaction conditions were studied to provide for control over the copolymer compositions, molecular weights, degrees of branching, and properties, as characterized by ¹H, ¹³C, and ¹⁹F NMR spectroscopy, gel permeation chromatography, elemental analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and solubility tests. Copolymers having number‐average molecular weights from 2.9 to 260 kDa and polydispersities (weight‐average molecular weight/number‐average molecular weight) from 1.8 to 4.8 were obtained. The molar fractions of PFS units increased with increases in the feed ratio of PFS to the inimer. The degrees of branching were typically about 30% with the feed of 1.0 or 2.0 equiv of PFS with respect to the inimer, although slight variations could be achieved through the variation of the inimer composition. Under similar reaction conditions with CuCl as the catalyst, ATR–SCVCP of BMS with PFS led to higher degrees of branching than ATR–SCVCP of CMS with PFS. Solubility tests indicated that the polymers prepared under conditions that avoided extensive biradical coupling were soluble in a broad range of organic solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4754–4770, 2005     

Pt‐catalyzed chemical modification of α,ω‐bis(hydrido)polydimethylsiloxanes and copoly(methylhydridosiloxane/dimethylsiloxane) with vinylheptaphenylcyclotetrasiloxane

Pt‐catalyzed hydrosilylation between vinylheptaphenylcyclotetrasiloxane and a series of α,ω‐bis(hydrido)polydimethylsiloxanes and copoly(methylhydridosiloxane/dimethylsiloxane) was used to prepare chemically modified materials. These modified polymers were characterized by IR, UV, and ¹H, ¹³C, and ²⁹Si NMR spectroscopy and gel permeation chromatography (GPC). The molecular weights, determined by GPC, UV, and NMR end‐group analysis, showed the anticipated increases. The thermal properties of the polymers were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The crystallinity, determined by DSC, was either reduced or completely eliminated for the modified polymers. The thermal stabilities, measured in both air and nitrogen by TGA, were slightly higher than the thermal stability of α,ω‐bis(trimethylsiloxy)polydimethylsiloxane. Significantly increased bulk viscosities were observed for all the modified polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3007‐3017, 2005     

Curing kinetics and glass‐transition temperature of hexamethylene diisocyanate‐based polyurethane

The curing process of hexamethylene diisocyanate‐based polyurethane has been monitored by applying FTIR and DSC methods. A general relationship between glass‐transition temperature (T_g) and conversion of curing process has been obtained. This suggests that the reaction path and the relative reaction rates are independent of the curing temperature. The reaction kinetics of the system is analyzed using the T_g data converted to the conversion of the curing process. A set of experimental data and one theoretical model of T_g versus chemical conversion are presented to prove the assumption where a direct one‐to‐one relationship between the T_g (as measured) and the chemical conversion is obtained. Apparent activation energies (E_a) obtained by applying three different methods suggest good agreement. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2213–2220, 2000     

Synthesis of a new hyperbranched‐linear‐hyperbranched triblock copolymer and its use as a chemical modifier for the cationic photo and thermal curing of epoxy resins

A new hyperbranched‐linear‐hyperbranched polymer was prepared in a one pot process by reaction of 4,4‐bis(4‐hydroxyphenyl)valeric acid and poly(ethylene glycol) (HPH). After characterization by ¹H and ¹³C NMR, SEC, DSC, and TGA, this polymer was used, in proportions of 5, 10, and 15 phr, as a chemical modifier in the UV and thermal cationic curing of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexyl carboxylate epoxy resin. The curing process was studied by calorimetry, demonstrating the accelerating effect of the hydroxyl groups present in HPH's structure. The morphology of the resulting thermosets depended on the curing system used, as demonstrated by FE‐SEM microscopy, but in both cases phase separation occurred. Thermosets obtained by thermal curing presented lower thermal stability than UV‐cured materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Micro ATR‐FTIR study of the hydration state of poly(N‐tert‐butylacrylamide‐co‐acrylamide) copolymers during phase transition in aqueous media and in the mixture of water–methanol

Coil‐globule transition of poly(N‐tert‐butylacrylamide‐co‐acrylamide) P(NTBAM‐co‐AM) copolymers is investigated in the aqueous solution and in the mixture of water–methanol by micro ATR‐FTIR spectroscopy technique. In this study the microstructure and its changes in the hydration states of the distinct groups of these copolymers are investigated by micro ATR/FTIR technique. The results showed that by heating the solution above the LCST hydrogen bonding between C?O and water was decreased but the hydrogen bonding between polymeric chains increased, which prove the aggregation of polymer chain during phase separation. The chemical shifts of IR bands are also studied in the mixture of water–methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 356–363, 2010     

New associative EHEC‐g‐PAam copolymers: Their syntheses,characterization, and rheological behavior

The syntheses and rheological behavior of ethyl hydroxyethyl cellulose (EHEC)‐based graft‐copolymers were studied. Copolymers were prepared by grafting EHEC with acrylamide (Aam) via reversible addition fragmentation chain transfer (RAFT) polymerization. Hydroxyl groups of EHEC were esterified with a carboxylic acid functional chain transfer agent (CTA) to prepare EHEC‐macroCTAs with different degrees of substitution. EHEC‐macroCTAs were characterized by ATR‐FTIR, ¹³C NMR, and SEC, and elemental analysis was used to quantify the degree of CTA substitution. EHEC‐macroCTAs with different degrees of substitution were copolymerized with acrylamide by “grafting from” technique. Formation of new cellulose‐based copolymers was comprehensively confirmed by ¹H NMR, ATR‐FTIR, and SEC measurements. Further, the associations of EHEC‐g‐PAam copolymers in water were studied at various concentrations and temperatures by means of UV–vis spectroscopy, fluorescence spectroscopy, and rheological measurements. The results indicate that copolymers have both intra and intermolecular association in water depending on the amount of grafts. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1869–1879, 2009