Thermosensitive t‐PLA‐b‐PNIPAAm tri‐armed star block copolymer nanoscale micelles for camptothecin drug release

Thermosensitive polylactide‐block‐poly(N‐isopropylacrylamide) (t‐PLA‐b‐PNIPAAm) tri‐armed star block copolymers were synthesized by atom transfer radical polymerization (ATRP) of monomer NIPAAm using t‐PLA‐Cl as macroinitiator. The synthesis of t‐PLA‐Cl was accomplished by esterification of star polylactides (t‐PLA) with 2‐chloropropionyl chloride using trimethylolpropane as a center molecule. FT‐IR, ¹H NMR, and GPC analyses confirmed that the t‐PLA‐b‐PNIPAAm star block copolymers had well‐defined structure and controlled molecular weights. The block copolymers could form core‐shell micelle nanoparticles due to their hydrophilic‐hydrophobic trait in aqueous media, and the critical micelle concentrations (CMC) were from 6.7 to 32.9 mg L^?1, depending on the system composition. The as‐prepared micelle nanoparticles showed reversible phase changes in transmittance with temperature: transparent below low critical solution temperature (LCST) and opaque above the LCST. Transmission electron microscopy (TEM) observations revealed that the micelle nanoparticles were spherical in shape with core‐shell structure. The hydrodynamic diameters of the micelle nanoparticles depended on copolymer compositions, micelle concentrations and media. MTT assays were conducted to evaluate cytotoxicity of the camptothecin‐loaded copolymer micelles. Camptothecin drug release studies showed that the copolymer micelles exhibited thermo‐triggered targeting drug release behavior, and thus had potential application values in drug controlled delivery. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4429–4439     

A photo‐degradable helix: Synthesis,structure, and photolysis of optically active poly[2,7‐bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate]

2,7‐Bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate ( BBPMFA ) was synthesized and polymerized using α,α′‐azobisisobutyronitrile or n‐Bu₃B‐air as a radical initiator and using the complex of 9‐fluorenyllithium with (S)‐(+)‐1‐(2‐pyrrolidinylmethyl)pyrrolidine as an optically active anionic initiator. Although the radical polymerization led to rather low‐molecular‐weight products at low yields, the anionic polymerization afforded polymers with higher molecular weights in higher yields. The poly( BBPMFA ) obtained by the anionic polymerization was slightly rich in isotacticity (meso diad 57%) and showed an intense circular dichroism (CD) spectrum and large dextrorotation. The intensity of the CD spectrum and magnitude of optical activity increased with an increase in M_n, suggesting that the polymer possesses a preferred‐handed helical conformation. The CD spectrum disappeared within 1 s on irradiation to the polymer in a CHCl₃ solution using a 500‐W Hg‐Xe lamp. This was ascribed to fast photolysis of the ester linkage leading to a loss of helical conformation of the entire chain. Photolysis products of poly( BBPMFA ) were poly(acrylic acid) and 2,7‐bis(4‐t‐butylphenyl)‐9‐methylenefluorene (2,7‐bis(4‐t‐butylphenyl)dibenzofulvene). The photolysis reaction seemed to proceed through the “unzipping” mechanism. The rate constant of photolysis of poly( BBPMFA ) under irradiation at monochromated 325 nm was around 0.01 s^?1 independent of molecular weight. Photolysis at 325 nm was approximately 2400 times faster than that for chemical ester solvolysis under a neutral condition in the dark. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of ω‐ and α,ω‐sulfonatotelechelics based on homopolymers and block copolymers of n‐butyl methacrylate and t‐butyl methacrylate

The synthesis of ω‐ and α,ω‐telechelics with sulfonate end groups through the sulfoalkylation of homopolymers and block copolymers of n‐butyl methacrylate and t‐butyl methacrylate with 1,3‐propane sultone is described. The polymerizations are initiated in tetrahydrofuran at −78 °C with either 1,1‐diphenyl‐3‐methylpentyllithium or dilithium 1,1,4,4‐tetraphenylbutane to obtain monofunctional or difunctional polymethacrylate anions, respectively. Narrow molecular weight distributions are obtained for the homopolymers and copolymers in the presence of LiCl in a 10/1 ratio relative to the initiator. The direct reaction of the poly(n‐butyl methacrylate) anions with the sultone results in low functionalization levels: f = 0.24–0.29 for the monofunctional anions and f = 0.32–0.35 for the difunctional anions. The reaction of the poly(t‐butyl methacrylate) anions or end‐capping of the poly(n‐butyl methacrylate) anions with t‐butyl methacrylate units before sulfoalkylation yields telechelics with f = 0.81–1.0 for the monofunctional anions and f = 1.74–1.94 for the difunctional anions. The telechelic polymers, purified by ultrafiltration, have been characterized by size exclusion chromatography, Fourier transform infrared, and ¹H NMR spectroscopy. The yield of the sulfoalkylation reactions, determined by colorimetric analysis of a complex formed with methylene blue, is in good agreement with the results obtained by nonaqueous titration of the acidified telechelics. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3711–3721, 2000     

Producing highly linear polyethylenes by using t‐butyl‐functionalized 2,6‐bis(imino)pyridylchromium(III) chlorides

A new family of t‐butyl substituted chromium(III) chloride complexes ( Cr1 – Cr6 ), bearing 2‐(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridine (aryl = 2,6‐Me₂C₆H₃ Cr1 , 2,6‐Et₂C₆H₃ Cr2 , 2,6‐i‐Pr₂C₆H₃ Cr3 , 2,4,6‐Me₃C₆H₂ Cr4 and 2,6‐Et₂‐4‐MeC₆H₂ Cr5 ) or 2,6‐bis(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)pyridine ( Cr6 ), has been synthesized by the reaction of CrCl₃·6H₂O in good yield with the corresponding ligands ( L1 – L6 ), respectively. The molecular structures of Cr2 and Cr6 were characterized by X‐ray diffraction highlighted a distorted octahedral geometry with the coordinated N,N,N ligand and three bonded chlorides around the metal center. On activation with modified methylaluminoxane or triisobutyl aluminum, most of the chromium precatalysts exhibit good activities toward ethylene polymerization and produce linear polyethylenes with high‐molecular weight. In addition, an in‐depth catalytic evaluation of Cr2 was conducted to investigate how cocatalyst type and amount, reaction temperature, and run time affect the catalytic activities and polymer properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1049–1058     

Isomerization polymerization and copolymerization of glycidyl alkanoates catalyzed by methylaluminum bis(2,6‐di‐t‐butyl‐4‐methylphenoxide)

The isomerization polymerizations of glycidyl propionate (1b), octanoate (1c), and stearate (1d) with methylaluminum bis(2,6‐di‐tert‐butyl‐4‐methylphenoxide) (3) were investigated. The polymerizations selectively gave poly(2‐alkyl‐1,3‐dioxolane‐4,2‐diyloxymethylene)s (2), although the polymer yield as well as the polymer molecular weight significantly decreased as the acyl chain of 1 was lengthened. These polymers readily hydrolyzed to glycerin and the corresponding fatty acids under mild conditions. The copolymerizations of glycidyl acetate (1a) with these monomers were also examined. In any combination, the composition of the obtained copolymer was essentially identical with the feed ratio, while both copolymer yield and molecular weight decreased as the feed of 1a was decreased. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 435–444, 1999 (See graphics.)     

Living Anionic Polymerization of 2‐Methyl‐4‐ phenyl‐1‐buten‐3‐yne

The anionic polymerization behavior of 2‐methyl‐4‐phenyl‐1‐buten‐3‐yne (2) was investigated to get information on the effect of substituent at the 2‐position. The polymerization of 2 did not proceed in tetrahydrofuran at –78°C by lithium initiators, while sodium initiators can conduct the polymerization smoothly to give polymers consisting of a specific 1,2‐polymerized unit. The living nature of the polymerization of 2 by diphenylmethylsodium was supported by the post‐polymerization experiment.     

Proton transfer‐controlled anionic polymerization of methyl‐substituted β‐lactams with potassium t‐butoxide and subsequent coupling reaction with saccharides

The potassium t‐butoxide‐catalyzed ring‐opening polymerization of 3,3‐dimethyl‐ and 4,4‐dimethyl‐2‐azetidinone proceeds quantitatively in a mixture of N,N‐dimethylacetamide and 5–10 wt % of lithium chloride at 25°C to give the corresponding monodisperse polyamides. The addition of methyl α‐D ‐glucoside into the living polyamide system gives a novel polyamide linked with the glucose moiety at one chain end. A new graft copolymer composed of a water soluble polysaccharide (dextran) backbone and many monodisperse polyamide branches was also prepared by a similar coupling method. The difference in acidity among the lactam monomers, the corresponding polyamides, and the alcohols was essential for the attainment of such a proton transfer‐controlled system composed of the living polymerization and the subsequent coupling reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 909–915, 1999     

配合物(ArO)2Yb(NPh2)2K(THF)4(Ar=C6H2-t-Bu3-2,4,6)的合成、分子结构和催化行为

Reaction of anhydrous YbC13 with 2 equiv, of sodium 2,4,6-tri-tert-butylphenoxide (ArONa, Ar=C6H2-t-Bu3-2,4,6) and 2 equiv, of potassium diphenyl amide in THF afforded the first bis(aryloxo) amido-lanthanide complex of (ArO)2Yb(NPh2)2K(THF)4 (1). In 1, the ytterbium and potassium were bridged via diphenyl amido ligands.The ytterbium metal center was coordinated to two oxygen atoms of aryloxide ligands and two nitrogen atoms of diphenyl amido ligands in a conventional distorted tetrahedral fashion, while the potassium interacted in η^2-fashion with two phenyl rings of the diphenyl amido ligands besides four THF molecules. 1 displayed moderate catalytic activities for the polymerization of methyl methacrylate and acrylonitrile.     

Selectivity in anionic and cationic ring‐opening polymerizations of tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane

Anionic and cationic ring‐opening polymerizations of two novel cyclotrisiloxanes, tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane ( I ) and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane ( II ), are reported. Anionic ring‐opening polymerization of I or II leads to copolymers with highly regular microstructures. Copolymers obtained by cationic polymerizations of I or II , initiated by triflic acid, have less regular microstructures characteristic of chemoselective polymerization processes. The composition and microstructure of copolymers have been characterized by ¹H and ²⁹Si‐NMR, the molecular weight distributions by GPC, and the thermal properties by DSC and TGA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5235–5243, 2004     

Synthesis of Well‐Defined Rod‐Coil‐Rod Polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate via One‐Pot Anionic Polymerization

A rod‐coil‐rod block copolymer, polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate, of controlled molecular weight was synthesized quantitatively via living anionic polymerization using potassium naphthalenide in the presence of sodium tetraphenylborate. The use of K⁺ as the counterion for the polymerization of styrene, and Na⁺ (NaBPh₄) for the polymerization of isocyanate leads to the formation of a well‐controlled novel triblock copolymer.

     

Multifunctional ATRP initiators: Synthesis of four‐arm star homopolymers of methyl methacrylate and graft copolymers of polystyrene and poly(t‐butyl methacrylate)

Tetrakis bromomethyl benzene was used as a tetrafunctional initiator in the synthesis of four‐armed star polymers of methyl methacrylate via atom transfer radical polymerization (ATRP) with a CuBr/2,2 bipyridine catalytic system and benzene as a solvent. Relatively low polydispersities were achieved, and the experimental molecular weights were in agreement with the theoretical ones. A combination of 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated free‐radical polymerization and ATRP was used to synthesize various graft copolymers with polystyrene backbones and poly(t‐butyl methacrylate) grafts. In this case, the backbone was produced with a 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated stable free‐radical polymerization process from the copolymerization of styrene and p‐(chloromethyl) styrene. This polychloromethylated polymer was used as an ATRP multifunctional initiator for t‐butyl methacrylate polymerization, giving the desired graft copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 650–655, 2001     

Oxygenated Metabolites of n‐3 Polyunsaturated Fatty Acids as Potential Oxidative Stress Biomarkers: Total Synthesis of 8‐F3t‐IsoP, 10‐F4t‐NeuroP and [D4]‐10‐F4t‐NeuroP

A wide variety of metabolic products of polyunsaturated fatty acids is of paramount importance for improving our medical knowledge in the field of oxidized lipids. Two novel metabolites of n‐3 polyunsaturated fatty acids, 8‐F_3t‐IsoP and 10‐F_4t‐NeuroP as well as a deuterated derivative thereof were synthesized based on an acetylenic intermediate. An original approach achieved lateral chain insertion of 8‐F_3t‐IsoP by a ring‐closing alkyne metathesis/semi‐reduction strategy together with a temporary tether.     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Synthesis and Crystal Structures of t‐Butyl‐Pyridine Adducts of ZnR2 (R = Me,i‐Pr,t‐Bu,Cp*)

Lewis acid‐base adducts of the general type R₂Zn(4‐tBuPy)_x (R = Me 1 , iPr 2 , tBu 3 , Cp* 4 ; x = 1, 2) were obtained in high yields from reactions of ZnR₂ with the Lewis base 4‐tBu‐Pyridine. Compounds 1 – 4 were characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy and elemental analyses, 1 and 4 also by X‐ray diffraction at single crystals.     

Kinetic study of the nitroxide‐mediated controlled free‐radical polymerization of n‐butyl acrylate in aqueous miniemulsions

The controlled free‐radical homopolymerization of n‐butyl acrylate was studied in aqueous miniemulsions at 112 and 125 °C with a low molar mass alkoxyamine unimolecular initiator and an acyclic β‐phosphonylated nitroxide mediator, N‐tert‐butyl‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl) nitroxide, also called SG1. The polymerizations led to stable latices with 20 wt % solids and were obtained with neither coagulation during synthesis nor destabilization over time. However, in contrast to latices obtained via classical free‐radical polymerization, the average particle size of the final latices was large, with broad particle size distributions. The initial [SG1]₀/[alkoxyamine]₀ molar ratio was shown to control the rate of polymerization. The fraction of SG1 released upon macroradical self‐termination was small with respect to the initial alkoxyamine concentration, indicating a very low fraction of dead chains. Average molar masses were controlled by the initial concentration of alkoxyamine and increased linearly with monomer conversion. The molar mass distribution was narrow, depending on the initial concentration of free nitroxide in the system. The initiator efficiency was lower than 1 at 112 °C but was very significantly improved when either a macroinitiator was used at 112 °C or the polymerization temperature was raised to 125 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4410–4420, 2002     

Ring‐Opening and polymerization of 1‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]‐1,3,3,5,5‐pentamethylcyclotrisiloxane

1‐[2′‐(Heptaphenylcyclotetrasiloxanyl)ethyl]‐1,3,3,5,5‐pentamethylcyclotetrasiloxane ( II ) was prepared from 1‐[2′‐(methyldichlorosilyl)ethyl]‐1,3,3,5,5,7,7‐heptaphenylcyclotetrasiloxane ( I ) and tetramethyldisiloxane‐1,3‐diol. Acid‐catalyzed ring‐opening of II in the presence of tetramethyldisiloxane gave 1,9‐dihydrido‐5‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]nonamethylpentasiloxane ( III ) and 1,9‐dihydrido‐3‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]nonamethylpentasiloxane ( IV ). Both acid‐ and base‐catalyzed ring‐opening polymerization of II gives highly viscous, transparent polymers. The structures of I – IV and polymers were determined by UV, IR, ¹H, ¹³C, and ²⁹Si NMR spectroscopy. In addition, molecular weights obtained by GPC and NMR end group analysis were confirmed with mass spectrometry. On the basis of ²⁹Si NMR spectroscopy, the polymers appear to result exclusively from ring‐opening of the cyclotrisiloxane ring. No evidence for ring‐opening of the cyclotetrasiloxane ring was observed. Polymer properties were determined by DSC and TGA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 137–146, 2006     

Reduction of Ethyl t‐Cinnamates by Samarium Diiodide

Rate constants directly measured from the GC‐analyzed method for SmI₂ reduction of ethyl t‐cinnamate and its substituted derivatives in the presence of HMPA and t‐butanol were obtained. HMPA exhibits a stronger catalytic effect than t‐butanol. Dependence of reaction rates on concentration of SmI₂ and temperature were studied. Electron‐donating groups retard this reduction; the electron‐withdrawing groups, on the other hand, enhance the reaction rates dramatically.     

Lipase‐catalyzed ring‐opening polymerization of 6(S)‐methyl‐morpholine‐2,5‐dione

Lipase‐catalyzed ring‐opening bulk polymerizations of 6(S)‐methyl‐morpholine‐2,5‐dione (MMD) were investigated. Selected commercial lipases were screened as catalysts for MMD polymerization at 100 °C. Polymerizations catalyzed with 10 wt % porcine pancreatic lipase type II crude (PPL), lipase from Pseudomonas cepacia, and lipase type VII from Candida rugosa resulted in MMD conversions of about 75% in 3 days and in molecular weights ranging from 8200 to 12,100. Poly(6‐methyl‐morpholine‐2,5‐dione) [poly(MMD)] had a carboxylic acid group at one end and a hydroxyl group at the other end. However, lipase from Mucor javanicus showed lower catalytic activity for the polymerization. During the polymerization, racemization of the lactate residue took place. PPL was selected for further studies. The rate of polymerization increased with increasing PPL concentration under otherwise identical conditions. When the PPL concentration was 5 or 10 wt % with respect to MMD, a conversion of about 70% was reached after 6 days or 1 day, respectively, whereas for a PPL concentration of 1 wt %, the conversion was less than 20% even after 6 days. High concentrations of PPL (10 wt %) resulted in high number‐average molecular weights (<3 days); with a lower concentration of PPL, lower molecular weight poly(MMD) was obtained. The concentration of water was an important factor that controlled not only the conversion but also the molecular weight. With increasing water content, enhanced polymerization rates were achieved, whereas the molecular weight of poly(MMD) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3030–3039, 2005     

Microwave‐Assisted Polymer Synthesis: State‐of‐the‐Art and Future Perspectives

Summary: Monomodal microwaves have overcome the safety uncertainties associated with the precedent domestic microwave ovens. After fast acceptance in inorganic and organic syntheses, polymer chemists have also recently discovered this new kind of microwave reactor. An almost exponential increase of the number of publications in this field reflects the steadily growing interest in the use of microwave irradiation for polymerizations. This review introduces the microwave systems and their applications in polymer syntheses, covering step‐growth and ring‐opening, as well as radical polymerization processes, in order to summarize the hitherto realized polymerizations. Special attention is paid to the differences between microwave‐assisted and conventional heating as well as the “microwave effects”.

Results of search on number of publications on microwave‐assisted polymerizations, sorted by year.     

Room temperature suzuki cross‐coupling polymerizations of aryl dihalides and aryldiboronic acid/acid esters with t‐Bu3P‐coordinated 2‐phenylaniline‐based palladacycle complex as the precatalyst

Room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters with t‐Bu₃P‐coordinated 2‐phenylaniline‐based palladacycle complex, [2′‐(amino‐kN)[1,1′‐biphenyl]‐2‐yl‐kC]chloro(tri‐t‐butylphosphine)palladium, as a general precatalyst is described. Such room temperature Suzuki cross‐coupling polymerization is achieved by employing six equivalents or more of the base and affords polymers within an hour, with the yields and the molecular weights in general comparable to or higher than reported results that required higher reaction temperature and/or longer polymerization time. Our study provides a general catalyst system for the room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters and paves the road for the investigation of employing other monodentate ligand‐coordinated palladacycle complexes including other electron‐rich monophosphine‐coordinated ones for room temperature cross‐coupling polymerizations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1606–1611