Pt‐catalyzed chemical modification of α,ω‐bis(hydrido)polydimethylsiloxanes and copoly(methylhydridosiloxane/dimethylsiloxane) with vinylheptaphenylcyclotetrasiloxane

Pt‐catalyzed hydrosilylation between vinylheptaphenylcyclotetrasiloxane and a series of α,ω‐bis(hydrido)polydimethylsiloxanes and copoly(methylhydridosiloxane/dimethylsiloxane) was used to prepare chemically modified materials. These modified polymers were characterized by IR, UV, and ¹H, ¹³C, and ²⁹Si NMR spectroscopy and gel permeation chromatography (GPC). The molecular weights, determined by GPC, UV, and NMR end‐group analysis, showed the anticipated increases. The thermal properties of the polymers were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The crystallinity, determined by DSC, was either reduced or completely eliminated for the modified polymers. The thermal stabilities, measured in both air and nitrogen by TGA, were slightly higher than the thermal stability of α,ω‐bis(trimethylsiloxy)polydimethylsiloxane. Significantly increased bulk viscosities were observed for all the modified polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3007‐3017, 2005     

Synthesis and thermal crosslinking of benzophenone‐modified poly(dimethylsiloxane)s

Dihydridocarbonyltris(triphenylphosphine)ruthenium catalyzes the regiospecific anti‐Markovnikov addition of an ortho C? H bond of benzophenone across the C? C double bonds of α,ω‐bis(trimethylsilyloxy)copoly(dimethylsiloxane/vinylmethylsiloxane) (99:1), α,ω‐bis(vinyldimethylsilyloxy)poly(dimethylsiloxane), and 1,3‐divinyltetramethyldisiloxane to yield α,ω‐bis(trimethylsilyloxy)copoly[dimethylsiloxane/2‐(2′‐benzophenonyl)ethylmethylsiloxane]), α,ω‐bis[2‐(2′‐benzophenonyl)ethyldimethylsilyloxy]poly(dimethylsiloxane), and 1,3‐bis[2‐(2′‐benzophenonyl)ethyl]tetramethyldisiloxane, respectively. These materials have been characterized with ¹H, ¹³C, and ²⁹Si NMR and IR spectroscopy. Their molecular weight distributions have been determined by gel permeation chromatography. The thermal stability of the polymers has been measured by thermogravimetric analysis, and their glass‐transition temperatures (T_g's) have been determined by differential scanning calorimetry. The molecular weight distribution, thermal stability, and T_g's of the modified polysiloxanes are similar to those of the precursor polymers. The molecular weights of these materials can be significantly increased via heating to 300 °C for 1 h. This may be due to crosslinking, by pyrocondensation, of pendant anthracene groups, which are produced by the pyrolysis of the attached ortho‐alkyl benzophenones. UV spectroscopy of the pyrolysate of 1,3‐bis[2‐(2′‐benzophenonyl)ethyl]tetramethyldisiloxane has confirmed the presence of pendant anthracene groups. Thermal crosslinking by the pyrocondensation of pendant anthracene groups has been verified by the pyrolysis of α,ω‐bis(trimethylsilyloxy)copoly[dimethylsiloxane/2‐(9′‐anthracenyl)ethylmethylsiloxane] (97:3). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5514–5522, 2004     

Synthesis of well‐defined polymers end‐functionalized with crosslinkable aziridine groups by living anionic polymerization

Well‐defined end‐functionalized polystyrene, poly(α‐methylstyrene), and polyisoprene with polymerizable aziridine groups were synthesized by the termination reactions of the anionic living polymers of styrene, α‐methylstyrene, and isoprene with 1‐[2‐(4‐chlorobutoxy)ethyl]aziridine in tetrahydrofuran at ?78 °C. The resulting polymers possessed the predicted molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.1) as well as aziridine terminal moieties. The cationic ring‐opening polymerization of the ω‐monofunctionalized polystyrene having an aziridinyl group with Et₃OBF₄ gave the polymacromonomer, whereas the α,ω‐difunctional polystyrene underwent crosslinking reactions to afford an insoluble gel. Crosslinking products were similarly obtained by the reaction of the α,ω‐diaziridinyl polystyrene with poly(acrylic acid)‐co‐poly(butyl acrylate). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4126–4135, 2005     

Polydiphenylsiloxane–polydimethylsiloxane–polydiphenylsiloxane triblock copolymers

Polydiphenylsiloxane–polydimethylsiloxane–polydiphenylsiloxane triblock copolymers were prepared by two methods. The first approach was the sequential addition of the monomers. The anionic polymerization of hexamethylcyclotrisiloxane initiated by dilithio diphenylsilanolate gave α,ω‐bis(lithio dimethylsilanolate)polydimethylsiloxane, which was added to hexaphenylcyclotrisiloxane at ～120 °C to yield the desired triblock material. In the other, a convergent approach was used. Excess α‐vinyldimethylsiloxypolydiphenylsiloxane was coupled to α,ω‐bis(hydrido)polydimethylsiloxane by a Pt‐catalyzed hydrosilylation reaction to give the triblock material. The formation of distinct blocks with regular microstructures in these materials was confirmed by ¹H, ¹³C, and ²⁹Si NMR spectroscopy as well as differential scanning calorimetry. The molecular weights were determined by gel permeation chromatography, and the thermal stabilities were evaluated by thermogravimetric analysis. Dynamic mechanical analysis was used to confirm thermal transitions obtained by differential scanning calorimetry and to evaluate the mechanical properties of the materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3629–3639, 2006     

Visible light‐induced thiol‐ene reaction: A new strategy to prepare Α,ω‐dithiol and Α,ω‐divinyl telechelic polythiolether oligomers

A new strategy is developed to prepare both α,ω‐dithiol and α,ω‐divinyl linear telechelic polythiolether oligomers by visible light induced thiol‐ene chemistry in the presence of a fac‐Ir(ppy)₃ photoredox catalyst. Polythiolether oligomers of well‐defined end groups and controlled molecular weights have been successfully synthesized at varying monomer molar ratios of 1,4‐benzenedimethanethiol (BDMT) to diethylene glycol divinyl ether (DEGVE). ¹H NMR and MALDI‐TOF MS analyses demonstrate that as‐prepared polythiolethers possess high end‐group fidelity, which is further supported by the successful polyaddition of polythiolethers bearing α,ω‐dithiol and α,ω‐divinyl groups. For example, with the α,ω‐dithiol‐ (M_n = 1900 g mol^?1, PDI = 1.25) and α,ω‐divinyl‐terminated (M_n = 2000 g mol^?1, PDI = 1.29) polythiolethers as macromonomers, the molecular weight of resulting polythiolether is up to 7700 g mol^?1 with PDI as 1.67. The reactivity of the terminal thiol group is further confirmed by the addition reaction with N‐(1‐pyrenyl)maleimide. UV‐vis spectra and fluorescene measurements suggest that fac‐Ir(ppy)₃ undergo a redox quenching process reacted with BDMT to generate thiyl free radicals. With these results, the mechanism of the thiol‐ene reaction catalyzed by photoredox catalyst is proposed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 740–749     

Dimethyldioxirane as a new and effective oxidation agent for the epoxidation of α,ω‐di(isobutenyl)polyisobutylene: A convenient synthesis of α,ω‐di(2‐methyl‐3‐hydroxypropyl)‐polyisobutylene

The synthesis and characterization of α,ω‐di(2‐methyl‐2,3‐epoxypropyl)polyisobutylene are reported. The epoxidation of α,ω‐di(isobutenyl)polyisobutylene was achieved at room temperature with dimethyldioxirane, which proved to be a very effective reagent for epoxidation without the formation of byproducts. A very good agreement was found for the conversion determined by ¹H NMR and matrix‐assisted laser desorption/ionization mass spectrometry (MALDI HMS). The epoxy end groups were converted quantitatively into aldehyde termini with zinc bromide as a catalyst. The aldehyde groups were then reduced with LiAlH₄ into primary hydroxyl functions to obtain α,ω‐di(2‐methyl‐3‐hydroxylpropyl)polyisobutylene with high efficiency. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3974–3986, 2002     

New fluorinated thermoplastic elastomers. III. Novel method of synthesis and characterization of alternating fluorinated polyimide/fluorinated polyhybridsiloxane block copolymers via polycondensation

The synthesis of fluorinated polyimide/fluorinated polyhybridsiloxane (FPI–FPHSX) block copolymers was achieved through the polycondensation of α,ω‐dichlorosilane fluorinated polyimides and α,ω‐disilanol fluorinated polyhybridsiloxanes. Three FPI–FPHSX block copolymers with 41, 50, and 76 wt % polyimide were synthesized and characterized by the tuning of the number‐average molecular weight of the soft polyhybridsiloxane segments. The influence of the soft‐segment length on the behavior of the thermoplastic elastomer material was studied, including the surface tension and thermal properties. The thermomechanical properties of the FPI–FPHSX block copolymers were also examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2237–2247, 2005     

New biodegradable polymers from renewable sources: Polyester‐carbonates based on 1,3‐propylene‐co‐1,4‐cyclohexanedimethylene succinate

α,ω‐Dihydroxy‐terminated copolymeric oligomers of a 1,3‐propylene/1,4‐cyclohexanedimethylene succinate structure were obtained by the thermal polycondensation of 1,3‐propanediol/1,4‐cyclohexanedimethanol/succinic acid mixtures. They were subsequently chain‐extended via phosgene synthesis to high molecular weight aliphatic/alicyclic copolyester‐carbonates. These new polymers, besides having a biodegradable backbone, originate from two monomers, namely, 1,3‐propanediol and succinic acid, which can be obtained by renewable sources. Therefore, they have a potential as environmentally friendly materials. All synthesized materials were characterized in reference to their molecular structure by ¹H NMR and ¹³C NMR. Their molecular weights and molecular weight distributions were determined by size exclusion chromatography, and their main thermal properties were measured by DSC. Spectroscopic characterizations were in full agreement with the proposed structures. 1,4‐Cyclohexanedimethanol was used as a diol comonomer to improve the overall thermal properties of poly(1,3‐propylene succinate). The results of the characterization performed show that the initial expectations were only partially satisfied. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2508–2519, 2001     

Phosphorus‐containing renewable polyester‐polyols via ADMET polymerization: Synthesis,functionalization, and radical crosslinking

An α,ω‐diene containing hydroxyl groups was prepared from plant oil‐derived platform chemicals. The acyclic diene metathesis copolymerization (ADMET) of this monomer with a phosphorus‐containing α,ω‐diene (DOPO II), also plant oil derived, afforded a series of phosphorus containing linear polyesters, which have been fully characterized. The backbone hydroxyls of these polyesters have been acrylated and radically polymerized to produce crosslinked polymers. The thermomechanical and mechanical properties, the thermal stability, and the flame retardancy of these phosphorus‐based thermosets have been studied. Moreover, methyl 10‐undecenoate has been used as chain stopper in selected ADMET polymerizations to study the effect of the prepolymers' molecular weights on the different properties of the final materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1649–1660, 2010     

Thiol‐terminated polyisobutylene: Synthesis,characterization, and derivatization

Thiol‐terminated polyisobutylene (α,ω‐PIB‐SH) was synthesized from thiourea and α,ω‐bromine‐terminated PIB in a three‐step, one‐pot procedure, using a cosolvent system of 1:1 (v:v) heptane:dimethylformamide. The initial alkylisothiouronium salt was produced at 90 °C. Aqueous base hydrolysis at 110 °C resulted in thiolate chain ends, which were re‐acidified to form telechelic PIB‐SH. ¹H and ¹³C NMR confirmed thiol functionality and complete terminal halogen conversion. Thiol‐based “click” reactions were used to demonstrate PIB‐SH utility. Alkyne‐terminated PIB was synthesized by a phosphine‐catalyzed thiol‐ene Michael addition with propargyl acrylate. Reaction of this product with 6‐mercaptohexanol produced tetrahydroxy‐functional PIB by a sequential thiol‐ene/thiol‐yne procedure. ¹H NMR confirmed the structures of both products. PIB‐SH was reacted with isocyanates in the presence of base to produce polythiourethanes. A model reaction used phenyl isocyanate in THF with catalytic triethylamine. Similar conditions were used to produce PIB‐based thiourethanes with and without a small‐molecule chain extender. Increased molecular weights and thiol group conversion were observed with GPC and ¹H NMR, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Lipidic polyols using thiol‐ene/yne strategy for crosslinked polyurethanes

Oleic acid and α,ω‐diacid were converted into propargylic esters followed by thiol‐ene/yne coupling (TEC/TYC) functionalization in presence of mercaptoethanol. The multiradical addition on fatty esters leads to the formation of lipidic polyols (OH1 and OH2), as judged by ¹H NMR and mass spectroscopies as well as by size exclusion chromatography. The crosslinking reaction between TEC/TYC‐based polyols and 4,4′‐methylene bis(phenylisocyanate) isocyanate reactant was monitored by FTIR experiment and reaction parameters were optimized. By differential scanning calorimetry, relatively high glass transitions are measured corresponding to structure with little or without dangling chain. Moreover, the thermal stability of the resulting plant oil‐based polyurethane materials (PU1 and PU2) were found to be fully consistent with that of other lipidic PUs respecting a three‐step process. Thanks to TYC methodology, fatty α,ω‐diacid produces lipidic polyol without dangling chain and lipidic thermoset PU with relatively high T_g. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1597–1606     

Ultrafast single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of acrylates initiated with iodoform in water at room temperature and catalyzed by sodium dithionite

Sodium dithionite in the presence of NaHCO₃ in water acts as a single‐electron‐transfer agent and facilitates the single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of acrylates initiated with iodoform at room temperature. The resulting α,ω‐di(iodo)polyacrylates can be used as macroinitiators for the SET–DTLRP of other acrylates. Ultrahigh‐molar‐mass poly(tert‐butyl acrylate) can be synthesized via the SET–DTLRP of tert‐butyl acrylate and has a very low weight‐average molecular weight/number‐average molecular weight ratio of 1.15. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2178–2184, 2005     

New fluorinated thermoplastic elastomers. I. The synthesis and thermal characteristics of α,ω‐dihydrosilane hybrid fluorinated polysiloxane precursors

The synthesis of new α,ω‐dihydrosilane hybrid fluorinated polysiloxanes is described via the polycondensation between a diallyl perfluorinated compound and tetramethyldisiloxane. Control over the size of the oligomers is possible when the reaction is performed in two steps. The length of the polysiloxane chains influences the glass‐transition temperature and the thermal stability of the fluorinated oligomers: the higher the length is, the higher the glass‐transition temperature and the thermal stability are. The synthesized compounds have been characterized with ¹H, ¹⁹F, and ²⁹Si NMR spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4485–4492, 2002     

An efficient synthesis of telechelic poly (N‐isopropylacrylamides) and its application to the preparation of α,ω‐dicholesteryl and α,ω‐dipyrenyl polymers

Poly(N‐isopropylacrylamide)s (PNIPAMs) with cholesteryl or pyrenyl moieties at each chain end (CH‐PNIPAMs or Py‐PNIPAMs) were prepared via end‐group modification of α,ω‐dimercapto poly(N‐isopropylacrylamides), ranging in molecular weight from ～ 7000 to 45,000 g mol^?1 with a polydispersity index of 1.10 or lower. The telechelic thiol functionalized PNIPAMs were obtained by aminolysis of α,ω‐di(isobutylthiocarbonylthio)‐poly(N‐isopropylacrylamide)s (iBu‐PNIPAMs) obtained by reversible addition‐fragmentation chain transfer (RAFT) polymerization of N‐isopropylacrylamide in the presence of the difunctional chain transfer agent, diethylene glycol di(2‐(1‐isobutyl)sulfanylthiocarbonylsulfanyl‐2‐methyl propionate) (DEGDIM). The self‐assembly of the polymers in water was assessed by fluorescence spectroscopy, using the intrinsic emission of Py‐PNIPAM or the emission of pyrene added as a probe in aqueous solutions of CH‐PNIPAM. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 314–326, 2008     

Studies on the modification of poly(ω‐bromoalkyl‐1‐glycidylether)s with 4′‐methoxybiphenyl‐4‐oxy mesogenic groups

A series of poly[ω‐(4′‐methoxy‐biphenyl‐4‐oxy)alkyl‐1‐glycidylether]s were synthesized by chemically modifying the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐hydroxy‐4′‐methoxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yields and almost quantitative degrees of modification. They were all insoluble in THF and other common solvents. Characterization by ¹³C NMR confirmed that all the polymers had the expected structure. The liquid crystalline behavior of the polymers was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction studies. Polymers that had alkyl spacers with n = 2 and 4 were smectic C, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C again. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5998–6006, 2005     

Cyclic and branched functional polyesters derived from 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl spirobisindane and various dicarboxylic acids

Triethylamine‐promoted polycondensations of 5,5′,6,6′‐tetrahydroxy‐3,3, 3′,3′‐tetramethyl spirobisindane (TTSBI) and α,ω‐alkane dicarboxylic acid dichlorides were performed with equimolar feed ratios. Three different procedures were compared. At a TTSBI concentration of 0.05 mol/L, gelation was avoided, and soluble cyclic polyesters having two OH groups per repeat unit were isolated. These polyesters were characterized with ¹H NMR spectroscopy, MALDI‐TOF mass spectrometry, and SEC and DSC measurements. All polycondensations with sebacoyl chloride resulted in gelation, regardless of the procedure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1699–1706, 2007     

Near‐monodisperse α‐hydroxy and α,ω‐dihydroxy amine‐based polymers: Synthesis and characterization

α‐Hydroxy and α,ω‐dihydroxy polymers of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) of various molecular weights were synthesized by group transfer polymerization (GTP) in tetrahydrofuran (THF), using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methyl propene (MTS) as the initiator and tetrabutylammonium bibenzoate (TBABB) as the catalyst. The hydroxyl groups were introduced by adding one 2‐(trimethylsiloxy) ethyl methacrylate (TMSEMA) unit at one or at both ends of the polymer chain. The ends were converted to 2‐hydroxyethyl methacrylate (HEMA) units after the polymerization by acid‐catalyzed hydrolysis. Gel permeation chromatography (GPC) in THF and proton nuclear magnetic resonance (¹H‐NMR) spectroscopy in CDCl₃ were used to determine the molecular weight and composition of the polymers. These mono‐ and difunctional methacrylate polymers can be covalently linked at the hydroxy termini to form star polymers and model networks, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1597–1607, 1999     

Degradable multisegmented polymers synthesized by consecutive radical addition‐coupling reaction of α,ω‐macrobiradicals and nitroso compound

A consecutive radical addition‐coupling reaction induced by spin‐trapping agent is applied to produce degradable multisegmented polymer using α,ω‐dibromo polymer as a precursor. The macroradical generated by single electron transfer process catalyzed by Cu/PMDETA from α,ω‐dibromo polymer can be efficiently captured by 2‐methyl‐2‐nitrosopropane (MNP), which results in nitroxide radical. The in situ formed nitroxide radical immediately undergoes cross‐coupling reaction with polymeric radical, generating block polymer bridged with alkoxyamine moiety. The consecutive radical addition‐coupling reaction generates multisegmented polymer via step‐growth mechanism. Different multisegmented polymers have been prepared from α,ω‐dibromo‐PS, PtBA, and PtBA‐PS‐PtBA. The block number of multisegmented polymers can be tailored by varying the feed ratio of α,ω‐dibromo precursor to MNP. The multisegmented polymer can be degraded in the presence of hydrogen atom donor or air, and the molecular weight distribution transformed back into shape of its original precursor as it is conjugated by alkoxyamine moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of alt‐copoly [oligosiloxane/1,4‐bis(ethylenediphenylsilyl)benzene]s

1,4‐Bis(vinyldiphenylsilyl)benzene ( I ) has been prepared and copolymerized by Pt‐catalyzed hydrosilylation with 1,9‐dihydridodecamethylpentasiloxane ( II ), 3,5,7‐tris(3′,3′,3′‐trifluoropropyl)‐1,1,3,5,7,9,9‐heptamethylpentasiloxane ( III ) and two different α,ω‐bis(hydrido)polydimethylsiloxanes (PDMS). The monomers and polymers were fully characterized by IR, UV, ¹H, ¹³C, ¹⁹F, and ²⁹Si‐NMR spectroscopy. The starting PDMS polymers and the product copolymers were further characterized by GPC, DSC, and TGA. The polymers showed thermal transitions characteristic to thermoplastic elastomers. The 1,4‐bis(ethyldiphenylsilyl)benzene moieties displayed melting transitions above room temperature while copolymer glass transition temperatures were below room temperature. Fluorescence spectra and quantum efficiencies of I and copolymers have been determined. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4825–4831, 2006     

Precision synthesis of sustainable thermoplastic elastomers from lysine‐derived monomers

Novel renewable thermoplastic elastomers were synthesized by sequential polymerization of lysine‐ and itaconic acid‐derived monomers. Ring‐opening polymerization of lysine‐based O‐carboxyanhydride monomer using diethylene glycol as an initiator gave well‐defined α,ω‐dihydroxy functionalized lysine‐derived polyesters. The M _n of these polyesters increased with the monomer conversion while retaining relatively narrow molecular weight distributions. Based on the successful controlled polymerization and esterification of α,ω‐dihydroxy with 2‐bromoisobutyryl bromide, the resultant Br‐PL‐Br macroinitiator was used for the atom transfer radical polymerization of N‐phenylitaconimide (PhII). Three poly(N‐phenylitaconimide)‐b‐polyester‐b‐poly(N‐phenylitaconimide) triblock copolymers were prepared containing 12 ? 25 mol% PPhII, as determined by ¹H NMR spectroscopy. The properties of the obtained triblock copolymer are evaluated as high‐performance and renewable thermoplastic elastomer materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 349–355