Solution route to inorganic nanobelt‐conducting organic polymer core‐shell nanocomposites

A facile and versatile solution‐based approach was developed to prepare semiconductor metal oxide nanobelt‐conducting organic polymer core‐shell nanocomposites. Well‐defined nanobelts of several types of oxide nanobelts were combined with conducting polymer [polypyrrole (PPy) and polyaniline (PANi)] via in situ polymerization in aqueous solution to obtain a new type of inorganic–organic composite nanostructure. Samples were characterized by using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, electron energy loss spectra, high‐resolution transmission electron microscopy, and ultraviolet–visible techniques. Electron energy loss spectra revealed the existence of C?C and C? N bonds in coating layers to prove the encapsulation of PPy or PANi. The red‐shift of absorption band at high‐energy was observed for PPy‐encapsulated composites via ultraviolet–visible spectroscopy, and significant absorption band shifts were also encountered to PANi‐encapsulated composites, which suggest possibilities of band‐gap tuning of such metal oxide‐conducting polymer composites to be applied especially in solar cell devices. However, the sacrifice of nanobelts‐core led to hollow structures of PPy and PANi, which expands the synthetic strategies to prepare conducting polymer nanotubes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2892–2900, 2005     

Fluorescein–formaldehyde oligomeric pH indicator: Facile synthesis,characterization, and potential application

A kind of fluorescent oligomeric pH indicator (fluorescein–formaldehyde product) was synthesized by the reaction of fluorescein with formaldehyde under alkaline conditions by a one‐pot method. The synthesized product was fully characterized with Fourier transform infrared, ¹H NMR, ultraviolet–visible spectra, luminescence spectra, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra. The results indicated that the reaction was a typical phenol–formaldehyde reaction and that the fluorescein–formaldehyde product contained dimer, trimer, tetramer, and even a little octamer. Visible spectra and luminescence spectra showed that the fluorescein–formaldehyde product could still provide pH sensitivity similar to that of fluorescein. In addition, the oligomeric pH indicator immobilized poly(vinyl alcohol) membranes could be easily fabricated and achieved better long‐term stability and fast equilibrium response. Thus, they are promising transparent membranes for optical pH sensors of a wide pH range (0.0–10.0) based on absorption and fluorescence. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3447–3453, 2005     

A versatile surfactant‐mediated synthetic route to gold/polyaniline derivative core/shell nanocomposites

This article describes a versatile two‐step method for gold/polyaniline derivative core/shell nanocomposites with the aid of nonionic surfactant F127. First, F127 and monomer were introduced to gold colloids followed by the addition of oxidant to initiate the polymerization of monomer to afford a conducting polymer shell around each gold nanoparticle. Experimental parameters, such as kinds and concentrations of surfactant and monomer, gold core size and shape, reaction time, were systematically investigated to disclose the underground mechanisms involved in the formation of gold/polymer core/shell nanocomposites. Furthermore, Fourier transform infrared, ultraviolet–visible, X‐ray diffraction, and X‐ray photoelectron spectroscopy techniques were used to characterize the gold/polymer core/shell nanocomposites. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3903–3912, 2010     

Viscoelastic properties and phase behavior of 12‐tert‐butyl ester dendrimer/poly(methyl methacrylate) blends

This study used refractometry, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and dielectric analysis to assess the viscoelastic properties and phase behavior of blends containing 0–20% (w/w) 12‐tert‐butyl ester dendrimer in poly(methyl methacrylate) (PMMA). Dendritic blends were miscible up through 12%, exhibiting an intermediate glass‐transition temperature (T_g; α) between those of the two pure components. Interactions of PMMA C?O groups and dendrimer N? H groups contributed to miscibility. T_g decreased with increasing dendrimer content before phase separation. The dendrimer exhibited phase separation at 15%, as revealed by Rayleigh scattering in ultraviolet–visible spectra and the emergence of a second T_g in dielectric studies. Before phase separation, clear, secondary β relaxations for PMMA were observed at low frequencies via dielectric analysis. Apparent activation energies were obtained through Arrhenius characterization. A merged αβ process for PMMA occurred at higher frequencies and temperatures in the blends. Dielectric data for the phase‐separated dendrimer relaxation (α_D) in the 20% blend conformed to Williams–Landel–Ferry behavior, which allowed the calculation of the apparent activation energy. The α_D relaxation data, analyzed both before and after treatment with the electric modulus, compared well with neat dendrimer data, which confirmed that this relaxation was due to an isolated dendrimer phase. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1381–1393, 2001     

Synthesis and characterization of single‐wall‐carbon‐nanotube‐doped emeraldine salt and base polyaniline nanocomposites

Nanocomposites of polyaniline (PANI) and single‐wall carbon nanotubes (SWNTs) were prepared and characterized via resonance Raman and electronic absorption spectroscopy (ultraviolet–visible/near‐infrared). The chemical synthesis of PANI was performed in the presence of SWNTs in concentrations ranging from 10 to 50 wt % (SWNT/PANI). The obtained materials were hydrophilic, homogeneous composite compounds. The chemical interaction between PANI (in the conducting emeraldine salt form and in the insulating emeraldine base form) and metallic and semiconducting nanotubes was investigated. The emeraldine salt form of the polymer was significantly stabilized in the composite in comparison with plain PANI. A selective electronic interaction process between PANI and metallic SWNTs was found. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 815–822, 2005     

Probing stepwise complexation in phenylazomethine dendrimers by a metallo-porphyrin core

A series of dendritic phenylazomethines (DPA), which have a meso-substituted zinc porphyrin core (DPAGX-ZnP, X = 1-4), were synthesized. Structural studies of these dendrimers were carried out using Tri-SEC (triple detection after size exclusion chromatography), intrinsic viscosity analysis, TEM (tunneling electron microscopy), and molecular modeling calculations by AM1. As a result, a sphere-like structure within a single-nanometer scale (R(h) = 22 A for DPAG4-ZnP) was observed. In addition, encapsulating effects by the DPA shell in the larger dendrimers were confirmed as fundamental properties, based on the UV-vis abosorption spectra, cyclic voltammograms, and 1H NMR spin-lattice relaxation times (T1). The DPAGX-ZnP acts as a multi-metal ion reservoir for SnCl2 and FeCl3. The generation-4 dendrimer (DPAG4-ZnP) can take up to 60 molar amounts of metal complexes around the porphyrin core. A quantitative study of the metal assembling reaction by UV-vis titration revealed stepwise layer-by-layer complexations from the inner imines nearest to the core to the surface. The redox behavior and fluorescence of the zinc porphyrin in these metal-assembled dendrimers also support the stepwise complexation of the metal ion. These analyses suggest that the finely assembled metal complexes in a dendrimer architecture strongly affect the electronic status of the porphyrin core. Results from transient absorption measurements strongly indicate a very fast electron transfer on a subpicosecond time scale between the core and assembled metal complexes.     

Dendrimer‐star polymer and block copolymer prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization with dendritic chain transfer agent

A new reversible addition‐fragmentation chain transfer (RAFT) agent, dendritic polyester with 16 dithiobenzoate terminal groups, was prepared and used in the RAFT polymerization of styrene (St) to produce star polystyrene (PSt) with a dendrimer core. It was found that this polymerization was of living characters, the molecular weight of the dendrimer‐star polymers could be controlled and the polydispersities were narrow. The dendrimer‐star block copolymers of St and methyl acrylate (MA) were also prepared by the successive RAFT polymerization using the dendrimer‐star PSt as macro chain transfer agent. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6379–6393, 2005     

Synthesis and characterization of conducting polythiophene/carbon nanotubes composites

Conducting polythiophene (PTh)/single‐wall carbon nanotubes (SWNTs) composites were synthesized by the in situ chemical oxidative polymerization method. The resulting cablelike morphology of the composite (SWNT–PTh) structures was characterized with elemental analysis, X‐ray photoelectron spectroscopy, Raman spectroscopy, Fourier transform infrared, ultraviolet–visible spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, X‐ray diffraction, and transmission electron microscopy. The standard four‐point‐probe method was used to measure the conductivity of the samples. Field emission scanning electron microscopy and transmission electron microscopy analysis revealed that the SWNT–PTh composites were core (SWNTs) and shell (PTh) hybrid structures. Spectroscopic analysis data for the composites were almost identical to those for PTh, supporting the idea that SWNTs served as templates in the formation of a coaxial nanostructure for the composites. The physical properties of the composites were measured and also showed that the SWNTs were modified by conducting PTh with an enhancement of various properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5283–5290, 2006     

Thiophene‐cored 2,2‐bis(methylol)propionic acid dendrimers for optical‐power‐limiting applications

The synthesis and characterization of dendron‐coated 2,5‐bis(phenylethynyl)thiophene chromophores are described. The dendrimers were grown divergently on the arylthiophene core with the versatile anhydride of 2,2‐bis(methylol)propionic acid. The arylthiophene core was synthesized with Sonogashira coupling reactions. Structurally well‐defined dendrimers up to the fourth generation were grown, as confirmed by size exclusion chromatography, NMR, and matrix‐assisted laser desorption/ionization time‐of‐flight analysis. The different dendritic substitution did not influence the absorption spectra of the compounds in or near the visible region. Solutions of arylthiophenes had good transparency at wavelengths greater than 400 nm. The dendritic thiophenes exhibited an optical‐power limit at the laser wavelength of 532 nm. However, the magnitude of the optical‐power limit of these compounds was slightly lower than that of a nondendritic arylthiophene with n‐pentyl substituents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1177–1187, 2005     

Synthesis of carbohydrate‐linked poly(polyoxometalate) poly(amido)amine dendrimers

Mannose‐functionalized and ethoxyethanol‐functionalized poly(amido)amine dendrimers bound multiple vanadate‐substituted polyoxotungstate Wells–Dawson‐type polyoxometalates (POMs). Dendrimers incorporating 10–30 POMs were characterized with NMR, transmission electron microscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry techniques. The number of metal clusters per dendrimer molecule varied according to the dendrimer generation and the nature of the surface functional groups. Efforts aimed at using the poly(polyoxometalate) dendrimers as oxidation catalysts are also described. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3059–3066, 2005     

Synthesis and luminescence characteristics of conjugated dendrimers with 2,4,6‐triaryl‐1,3,5‐triazine periphery

We have synthesized conjugated dendrimer with triazine peripheries, and their luminescence properties were investigated. The dendrimers consist of dendritic triazine wedges for electron transport, distyrylbenzene core as an emitting moiety, and t‐butyl peripheral groups for good processing properties. The dendrimers have LUMO values of about ?2.7 eV possibly because of the triazine moiety with high electron affinity. Photoluminescence study indicates that energy transfer occurs from the triazine wedges to the stilbene bridge, and finally to the core chromophore units due to a cascade decrease of bandgap from the peripheral wedge to core moiety. Therefore, the emission wavelength was determined by the structure of the core unit. The energy transfer efficiency of distyrylbenzene‐cored dendrimers was about 75 and 55% for Trz‐1GD‐DSB and Trz‐2GD‐DSB, respectively. A preliminary electroluminescence property also was investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 254–263, 2006     

Preparation and characterization of redox cellulose Langmuir–Blodgett films containing a ferrocene derivative

The 3‐ferrocenoylpropanoyl group, one of the redox species, was introduced at C‐2 and/or C‐3 positions of 6‐O‐(4‐stearyloxytrityl)cellulose. The spreading behavior of the cellulose derivatives on the water surface and the properties of Langmuir–Blodgett (LB) films were investigated. The surface pressure–area isotherm of the cellulose monolayer was changed by the subphase temperature. Uniform monolayers of 6‐O‐(4‐stearyloxytrityl)cellulose 3‐ferrocene propionate (STCFc) could be deposited successively onto several substrates by the horizontal lifting method at 10 mN m^?1, and this produced X‐type LB films. The successive uniform depositions of STCFc were confirmed by ultraviolet–visible absorption spectra. X‐ray diffraction measurements indicated that the thickness of the STCFc molecules in the LB films was 1.99 nm. Fourier transform infrared spectroscopy measurements supported the idea that hydrocarbon chains in the LB films were highly ordered (trans‐zigzag) and oriented considerably perpendicular to the surface of the substrate. Moreover, the C?O group of the ferrocenoyl groups was perpendicular to the surface of the substrate, and the ferrocene group was occupied in the water phase. Cyclic voltammograms for the STCFc monolayer on a gold electrode exhibited surface waves. The interfacial electron‐transfer process between the redox site incorporated into the cellulose LB monolayer and the electrode surface was fast enough at a scanning rate lower than 100 mV s^?1. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5023–5031, 2005     

Synthesis of soluble electron‐donating polymers containing vinylogous TTF by oxidative dimerization of 1,4‐bisdithiafulvenyl‐2,5‐dialkoxybenzene

A new electron‐donating polymer composed of a vinylogous tetrathiafulvalene (TTF) unit was prepared by the oxidative dimerization of 1,4‐bisdithiafulvenyl‐2,5‐didodecyloxybenzene using iodine. The polymer was soluble in common organic solvents such as CHCl₃ and toluene. The number‐average molecular weight of the polymer with dodecyloxy group was 24,900 determined from GPC. The UV–vis spectrum of the polymer showed the absorption maxima at 587, 712, and 803 nm, which are due to a cation radical of the vinylogous TTF unit in the polymer. The reduction of the polymer to its neutral state was performed using sodium hydrogen sulfite. The structure of the polymer was confirmed by ¹H NMR and UV–vis spectra compared with that of a dimer model compound prepared by oxidation of 1‐dithiafulvenyl‐2,5‐didodecyloxybenzene using iodine. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4600–4608, 2005     

Deposition of gallium oxide nanodots prepared from metal‐assembling dendrimer molecules isolated by the spacing of the nonmetal‐assembling dendrimer molecules in the two‐dendrimers mixture monolayer

Phenylazomethine dendrimers (DPA) can precisely incorporate metal chlorides onto the imine sites in a stepwise fashion. Such precise dendrimer–metal complexes allow the preparation of size‐controlled subnanometer metal particles. We now propose a novel approach for the fabrication of size‐controlled subnanometer metal oxide dots isolated on a substrate using two different‐type dendrimers. One is a fourth‐generation phenylazomethine dendrimer (DPAG4) and the other is a benzylether dendrimer (BzEG3) with a zinc porphyrin core. Even though the diameter of BzEG3 corresponds to that of DPAG4, BzEG3 has no metal‐complexing site. Upon dip coating on a highly oriented pyrolytic graphite substrate by the mixed solution of the metal chloride‐assembling DPAG4 molecules and BzEG3 molecules, the dendrimer monolayer was immobilized on the substrate. The concentration of the dendrimer mixture was determined in order to separate each DPAG4–metal chloride complex molecule by BzEG3. Monodispersed metaloxide nanodot arrays could be obtained from the dendrimer monolayer in which DPAG4–metal chloride complex molecule is well isolated by the BzEG3 as a spacer after the hydrolysis of metal chlorides followed by the complete removal of dendrimers. Copyright © 2013 John Wiley & Sons, Ltd.     

Polyurethane/polyaniline and polyurethane‐poly(methyl methacrylate)/polyaniline conductive core‐shell particles: Preparation,morphology, and conductivity

Polyurethane/polyaniline (PU/PANI) and polyurethane‐poly(methyl methacrylate)/polyaniline (PU‐PMMA/PANI) conductive core‐shell particles were synthesized by a two‐stage polymerization process. The first stage was to produce a core of PU or PU‐PMMA via miniemulsion polymerization using sodium dodecyl sulfate (SDS) as the surfactant. The second stage was to synthesize the shell of polyaniline over the surface of core particles. Hydrogen chloride (HCl) and dodecyl benzenesulfonic acid (DBSA) were used as the dopant agents. Ammonium persulfate (APS) was used as the oxidant for the polymerization of ANI. Different concentrations of HCl, DBSA, and SDS would cause different conformations of PANI chains and thus different morphologies of PANI particles. UV–visible spectra revealed that the polaron band was blue‐shifted because of the more coiled conformation of PANI chains by increasing the concentration of DBSA. Besides, with a high concentration of DBSA, both spherical‐ and rod‐shape PANI particles were observed by transmission electron microscope, and the coverage of PANI particles onto the core surfaces was improved. The key point of formation of rod‐type PANI particles was that DBSA was served with a high concentration accompanied with the existence of HCl or SDS. The better coverage of PANI particles over the core surfaces by charging higher DBSA concentrations resulted in a higher conductivity of hybrid particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3902–3911, 2007     

Synthesis of an oligosaccharide–polylysine dendrimer with reducing sugar terminals leading to acquired immunodeficiency syndrome vaccine preparation

A novel cellobiose–polylysine dendrimer with reducing sugar terminals was synthesized in which the reactive reducing end of a disaccharide cellobiose was directing outward. Hexa‐O‐benzyl‐4′‐(1‐carboxyethyl)‐cellobioside (HBCEC) was synthesized through the reaction of a 4′‐hydroxyl group of benzyl hexa‐O‐benzyl‐cellobioside with methyl 2‐chloropropionate, followed by the removal of the methyl ester group. HBCEC was reacted with polylysine dendrimer generation 3 (G3) to produce benzylated cellobiose–polylysine dendrimer G3. After debenzylation, a cellobiose–polylysine dendrimer G3 was obtained in which the reducing end of the cellobiose was the terminal group of the dendrimer. For the preparation of a dendrimer‐type acquired immunodeficiency syndrome vaccine, the cellobiose–polylysine dendrimer was reacted with a tripeptide (glycyl–prolyl–leucine) and a cyclic oligopeptide from the human immunodeficiency virus by reductive amination; this produced a tripeptide‐bound cellobiose–polylysine dendrimer and an insoluble compound, respectively. The structure analysis was carried out with NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2195–2206, 2005     

Covalent surface functionalization of multiwalled carbon nanotubes through bergman cyclization of enediyne‐containing dendrimers

A method for covalent functionalization of multiwalled carbon nanotubes (MWCNTs) was developed using the free radicals generated through Bergman cyclization of enediyne‐containing compounds. Four enediyne‐bearing Frechet type dendrimers were synthesized in good quantities and characterized. Then, the enediyne‐containing molecules were reacted with MWCNTs in N‐methyl‐2‐pyrrolidinone at 206 °C under nitrogen. The structure and morphology of the resulting products were characterized by thermogravimetric analysis, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and transmission electron microscopy. The dendrimer‐functionalized MWCNTs showed good solubility/dispersibility in common organic solvents and polymer solutions. They were used in the formation of polymer composites through electrospinning with polycaprolactone. The results confirmed the surface functionalization of MWCNTs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and optical and electrochemical properties of thermotropic,liquid‐crystalline,semirigid copolyesters based on 2,5‐diphenyl‐1,3,4‐thiadiazole units

Novel thermotropic liquid‐crystalline (LC) copolyesters were prepared with three disubstituted (4,4′‐, 3,4′‐, and 3,3′‐) dioxydiundecanol derivatives of terphenyl analogues of 1,3,4‐thiadiazole [2,5‐diphenyl‐1,3,4‐thiadiazole (DPTD)], and their optical and electrochemical properties were examined. Their structures were characterized with Fourier transform infrared, ¹H NMR spectroscopy, and elemental analyses. The thermal and mesomorphic properties of the copolyesters were investigated with differential scanning calorimetry measurements, polarized microscopy observations, and X‐ray analyses; the data suggested that these copolymers formed LC smectic or nematic phases. The mesomorphic tendency decreased in the following order: 4,4′‐DPTD and 3,4′‐DPTD copolyesters > 4,4′‐DPTD and 3,3′‐DPTD copolyesters > 3,4′‐DPTD and 3,3′‐DPTD copolyesters. Solution and solid‐state ultraviolet–visible (UV–vis) and photoluminescence spectra indicated that the copolyesters displayed maximum absorbances and blue emissions according to the DPTD unit; the peak maxima of absorption and emission spectra of the copolyesters shifted to lower wavelengths in the aforementioned order for the LC properties. Cyclic voltammetry measurements indicated that the electrochemical band gaps of the polyesters estimated from the onset of reduction and oxidation processes were almost the same as the optical band gaps determined from the solid‐state UV–vis spectral data. The DPTD unit enhanced the hole‐injection barrier and improved the charge‐injection balance in these polyesters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1511–1525, 2005     

Study on the preparation and the self‐assembly of poly(propyleneimine)–poly(styrene) nanoparticles

Using 2‐chloropropionamide derivative of poly(propyleneimine) dendrimer DAB‐dendr‐(NH₂)₃₂ (DAB‐32‐Cl) as the macroinitiator, atom transfer radical polymerization of styrene was successfully carried out in DMF medium. The monodisperse poly(propyleneimine)–polystyrene (dendrimer–PSt) particles with diameters smaller than 100 nm could be prepared. The morphology, size, and size distribution of the dendrimer–PSt particles were characterized by transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS). The effects of reaction temperature, the ratio of St/macroinitiator, and reaction time on the size, and size distribution of the dendrimer–PSt nanoparticles were investigated. In a selective solvent (DMF/H₂O), polymers can self‐assemble into different aggregate configurations such as regular microsphere and wire‐like thread. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2658–2666, 2008     

Synthesis of a new type of core–shell particle from hyperbranched polyglycerol

Based on hyperbranched polyglycerol (PG), a route to prepare particles with a novel topology was developed. The hydroxyls of PG were converted to trithiocarbonates, and the latter were used to mediate the surface graft polymerization of N,N‐dimethylaminoethyl acrylate. The poly(N,N‐dimethylaminoethyl acrylate) shell was crosslinked by 1,6‐dibromohexane and then parted from the core by the cleavage of trithiocarbonates with sodium borohydride. Novel particles with thiol groups located on the interface between the PG core and poly(N,N‐dimethylaminoethyl acrylate) shell were thus formed. The shell crosslinking could be performed at very high solid contents (2–4%). These polymer particles showed pH‐ and temperature‐dependent solubility. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5458–5464, 2005