Degradable polymer networks and star polymers based on mixtures of two cleavable dimethacrylate crosslinkers: Synthesis,characterization, and degradation

Mixtures of two cleavable dimethacrylate crosslinkers, the hydrolyzable di(methacryloyloxy‐1‐ethoxy)methane (DMOEM) and the thermolyzable 1,1‐ethylenediol dimethacrylate (EDDMA), were used for the preparation of neat crosslinker polymer networks, randomly crosslinked polymer networks of methyl methacrylate (MMA), and star polymers of MMA, using group transfer polymerization in tetrahydrofuran (THF). All star polymers and randomly crosslinked polymer networks containing mixtures of the hydrolyzable DMOEM and the thermolyzable EDDMA crosslinkers gave THF‐soluble final products when subjected to sequential thermolysis and hydrolysis, in this order. When applying sequential hydrolysis and thermolysis, only the star polymers with an EDDMA crosslinker content equal to or higher than 50% gave THF‐soluble final products. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5853–5870, 2009     

Preparation of poly(N-isopropylmethacrylamide) latexes kinetic studies and characterization

Thermosensitive crosslinked polymer latexes have been synthesized by precipitation polymerization of N-isopropylmethacrylamide (NIPMAM) as a main monomer, methylene bis-acrylamide (MBA) as a crosslinker, and potassium persulfate (KPS) as the initiator. Polymerizations kinetics were first investigated by studying both the influence of crosslinker (MBA) and initiator (KPS) concentrations and temperature effects on the polymerization conversion, the particle size, and water-soluble polymer (WSP) as a function of time. Particle size analysis by Scanning Electron Microscopy (SEM) showed that a short nucleation step afforded the synthesis of highly monodispersed latexes. In addition, a strong dependence of WSP formation on MBA and KPS concentration and polymerization temperature was found, as well. Comparison of particle size by SEM and quasielastic light scattering clearly evidenced the dramatic effect of temperature on particle size. Lower critical solubility temperatures (LCST) of latexes were determined and compared. Finally, based on these results, the mechanism of particle formation in this polymerization process is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1823–1837, 1999     

Hybrid atom transfer radical polymerization system for balanced polymerization rate and polymer molecular weight control

A hybrid polymerization system that combines the fast reaction kinetics of conventional free radical polymerization and the control of molecular weight and distribution afforded by ATRP has been developed. High‐free radical initiator concentrations in the range of 0.1–0.2 M were used in combination with a low concentration of ATRP catalyst. Conversions higher than 90% were achieved with ATRP catalyst concentrations of less than 20 ppm within 2 h for the hybrid ATRP system as compared with ATRPs where achieving such conversions would take up to 24 h. These reaction conditions lead to living polymerizations where polymer molecular weight increases linearly with monomer conversion. As in living polymerization and despite the fast rates and low ATRP catalyst concentrations, the polydispersity of the produced polymer remained below 1.30. Chain extension experiments from a synthesized macroinitiator were successful, which demonstrate the living characteristics of the hybrid ATRP process. Catalyst concentrations as low as 16 ppm were found to effectively mediate the growth of over 100 polymer chains per catalytic center, whereas at the same time negating the need for post polymerization purification given the low‐catalyst concentration. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2294–2301, 2010     

Controlled preparation of nanometer‐sized supramolecular cylinders of poly(ethylene oxide) embedded in methacrylate matrices

Semi‐interpenetrating networks of poly(ethylene oxide) (PEO) and highly crosslinked poly(methacrylate)s were generated from solutions of PEO in mixtures of methacrylate monomers and dimethacrylate crosslinkers. The deep quenching of the solutions into the unstable region resulted in microphase separation via a spinodal decomposition mechanism. Through the crystallization of the PEO inside the polymer‐rich phase, the domain size was reduced below the Cahn–Hilliard limit. The microstructure was permanently preserved by subsequent UV‐initiated polymerization of the monomers well below the PEO melting temperature. The semi‐interpenetrating networks were characterized by differential scanning calorimetry, small‐angle X‐ray scattering, NMR spin‐diffusion measurements, and electron microscopy. Morphologies based on networks of cylindrical PEO aggregates with diameters of 10 ± 2 nm were observed, nearly independent of the molecular weight of the used PEO. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2041–2056, 2000     

Polymer characterization by interaction chromatography

Liquid chromatography (LC) is a powerful tool for the characterization of synthetic polymers, that are inherently heterogeneous in molecular weight, chain architecture, chemical composition, and microstructure. Of different versions of the LC methods, size exclusion chromatography (SEC) is most commonly used for the molecular weight distribution analysis. SEC separates the polymer molecules according to the size of a polymer chain, a well‐defined function of molecular weight for linear homopolymers. The same, however, cannot be said of nonlinear polymers or copolymers. Hence, SEC is ill suited for and inefficient in separating the molecules in terms of chemical heterogeneity, such as differences in chemical composition of copolymers, tacticity, and functionality. For these purposes, another chromatographic method called interaction chromatography (IC) is found as a better tool because its separation mechanism is sensitive to the chemical nature of the molecules. The IC separation utilizes the enthalpic interactions to vary adsorption or partition of solute molecules to the stationary phase. Thus, it is used to separate polymers in terms of their chemical composition distribution or functionality. Further, the IC method has been shown to give rise to much higher resolution over SEC in separating polymers by molecular weight. We present here our recent progress in polymer characterization with this method. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1591‐1607, 2005     

Synthesis of gold–poly(methyl methacrylate) core–shell nanoparticles by surface‐confined atom transfer radical polymerization at elevated temperature

Surface‐confined atom transfer radical polymerization was used to prepare gold nanoparticle–poly(methyl methacrylate) core–shell particles at elevated temperature. First, gold nanoparticles were prepared by the one‐pot borohydride reduction of tetrachloroaurate in the presence of 11‐mercapto‐1‐undecanol (MUD). MUD‐capped gold nanoparticles were then exchanged with 3‐mercaptopropyltrimethoxysilane (MPS) to prepare a self‐assembled monolayer (SAM) of MPS on the gold nanoparticle surfaces and subsequently hydrolyzed with hydrochloric acid. The extent of exchange of MUD with MPS was determined by NMR. The resulting crosslinked silica‐primer layer stabilized the SAM of MPS and was allowed to react with the initiator [(chloromethyl)phenylethyl] trimethoxysilane. Atom transfer radical polymerization was conducted on the Cl‐terminated gold nanoparticles with the CuCl/2,2′‐bipyridyl catalyst system at elevated temperature. The rates of polymerization with the initiator‐modified gold nanoparticles exhibited first‐order kinetics with respect to the monomer, and the number‐average molecular weight of the cleaved graft polymer increased linearly with the monomer conversion. The presence of the polymer on the gold nanoparticle surface was identified by Fourier transform infrared spectroscopy and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3631–3642, 2005     

Synthesis and characterization of telechelic polymethacrylates via RAFT polymerization

The reversible addition–fragmentation chain transfer (RAFT) polymerization technique has been employed to synthesize linear α,ω ‐telechelic polymers with either hydroxyl or carboxyl end groups. Methyl methacrylate, butyl methacrylate, and butyl acrylate were polymerized with RAFT polymerization. The polymerizations exhibited the usual characteristics of living processes. Telechelic polymethacrylates were obtained from a hydroxyl monofunctional RAFT polymer with a two‐step chain‐end modification procedure of the dithioester end group. The procedure consisted of an aminolysis followed by a Michael addition on the resulting thiol. The different steps of the procedure were followed by detailed analysis. It was found that this route was always accompanied by side reactions, resulting in disulfides and hydrogen‐terminated polymer chains as side products next to the hydroxyl‐terminated telechelic polymers. Telechelic poly(butyl acrylates) with carboxyl end groups were produced in a single step procedure with difunctional trithiocarbonates as RAFT agents. The high yield in terms of end group functionality was confirmed by a new critical‐liquid‐chromatography method, in which the polymers were separated based on acid‐functionality and by mass spectrometry analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 959–973, 2005     

Some novel accelerating agents for nitroxide‐mediated living free‐radical polymerization

Malononitrile (MN), trifluoroacetic acid anhydride, acetylacetone, acetoacetic ester, and diethyl malonate have been identified as novel rate‐accelerating additives for nitroxide‐mediated living free‐radical polymerization. Among these additives, MN has the greatest accelerating effect. Adding MN at an MN/2,2,6,6‐tetramethylpiperidine‐oxyl (TEMPO) molar ratio of 4.0 results in a nearly 20 times higher rate of polymerization of styrene (St), and adding MN at an MN/TEMPO molar ratio of 2.5 results in a nearly 15 times higher rate of copolymerization of St and methyl methacrylate. The polymerization of St proceeds in a living fashion, as indicated by the increase in the molecular weight with time and conversion and the relatively low polydispersity. The polymerization rate of St is so quick that the conversion reaches 70% within 1 h at 125 °C when the molar ratio of MN to TEMPO is 4:1. Moreover, the reaction temperature can be reduced to 110 °C. A possible explanation for this effect is that the formation of hydrogen bonds between the MN and TEMPO moiety weakens the C? ON bond at the end of the polymer chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5246–5256, 2005     

Poly(styrene‐co‐glycerol dimethacrylate): Synthesis,characterization, and application as a resin for gel‐phase peptide synthesis

An efficient cross‐linked polymer support for solid‐phase synthesis was prepared by introducing glycerol dimethacrylate cross‐linker to polystyrene network using free radical aqueous suspension polymerization. The support was characterized by various spectroscopic methods. Morphological feature of the resin was analyzed by microscopy. The polymerization reaction was investigated with respect to the effect of amount of cross‐linking agent, which in turn vary the swelling, loading, and the mechanical stability of the resin. The solvent uptake of the polymer was studied in relation to cross‐linking and compared with Merrifield resin. The stability of the resin was tested in different synthetic conditions used for solid‐phase peptide synthesis. Hydroxy group of the support was derivatized to chloro and then amino groups using different reagents and reaction conditions. Efficiency of the support was tested and compared with TentaGel? resin by following different steps involved in the synthesis of the 65–74 fragment of acyl carrier protein. The results showed that the poly(styrene‐co‐glycerol dimethacrylate) (GDMA‐PS) is equally efficient as TentaGel resin in peptide synthesis. The purity of the peptides was analyzed by HPLC and identities were determined by mass spectroscopy and amino acid analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4382–4392, 2005     

Symmetrical polymer systems prepared using a degradable bifunctional atom transfer radical polymerization initiator: Synthesis,characterization, and cleavage

Linear (co)polymers and dimethacrylate‐end‐linked polymer networks of methyl methacrylate with 2‐(dimethylamino)ethyl methacrylate, cleavable in the middle of the polymer chain, either under thermolysis or alkaline hydrolysis conditions, were prepared via atom transfer radical polymerization (ATRP) using a specially designed bifunctional degradable initiator. This initiator was 2,6‐pyridinediethanol di(2‐bromo‐2‐methyl propanoate) (PyDEDBrMeP), bearing two 2‐(pyridin‐2‐yl)ethyl ester moieties, known for their thermal and hydrolytic (alkaline conditions) lability. As a control, a more stable bifunctional ATRP initiator, 2,6‐pyridinedimethanol di(2‐bromo‐2‐methyl propanoate) (PyDMDBrMeP), was also synthesized together with the corresponding linear polymers and polymer networks prepared from it. Thermal or hydrolytic treatment of the polymers prepared using PyDEDBrMeP led to a reduction in the molecular weights of the linear polymers by a factor of two, and to the conversion of the polymer networks to soluble branched (star) structures, consistent with the expected cleavage of the initiator residue located in the middle of the polymer chain. Thermal treatment of the polymers prepared using PyDMDBrMeP did not affect their molecular weight due to the thermal stability of the (pyridin‐2‐yl)methyl ester group, while treatment under alkaline hydrolysis conditions resulted in complete cleavage, similar to the PyDEDBrMeP‐prepared polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2342–2355     

Shielded molecularly imprinted polymers prepared with a selective surface modification

Uniformly sized, molecularly imprinted polymers (MIPs) of bisphenol A (BPA), one of many potential endocrine disruptors, were prepared by selective surface modification and immobilized at intervals of functional monomers with 4,4′‐methylenebisphenol as a pseudotemplate. MIPs for BPA were prepared with 4‐vinyl pyridine immobilized at the most effective interval and with ethylene glycol dimethacrylate monomer as a functional crosslinker. The prepared MIPs were surface‐modified with both polar and ionic monomers with different modification methods and then evaluated to reveal their selectivity and retention characteristics. Some of the modified MIPs showed significant selectivity for BPA retention when they were used as high‐performance liquid chromatography (HPLC) stationary phases, in comparison with ordinary MIPs. This effect of molecular imprinting was retained even after the surface modification of MIPs. The MIPs employed as pretreatment media for a column‐switching HPLC system provided a detection limit as low as 1 ng/L (ppt) by electrochemical detection. Actual samples, including Suwannee River natural organic matter (NOM), were analyzed for BPA, and BPA was quantitatively detected in NOM even with the combination with widely used UV detection because of the effective removal of interference afforded by an effective surface modification of the MIPs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2048–2060, 2005     

Monte Carlo simulation of size exclusion chromatography for randomly branched and crosslinked polymers

The elution curves of size exclusion chromatography for nonlinear polymers formed through random branching and crosslinking of long polymer chains were simulated with a Monte Carlo method. We considered two types of measured molecular weight distributions (MWDs): (1) the MWD calibrated relative to standard linear polymers and (2) the MWD obtained with a light scattering (LS) photometer in which the weight‐average molecular weight of polymers within the elution volume is determined directly. The calibrated MWDs clearly underestimate the molecular weights for both randomly branched and crosslinked polymers, and this technique can be used to assess the degree of deviation from the true MWD. When the primary chains conform to the most probable distribution, the calibrated MWD can be estimated reasonably well with the Zimm–Stockmayer equation for the g factor with the help of the relationship between the average number of branch points per molecule and the degree of polymerization. However, the LS method gives good estimates of the true MWD for both randomly branched and crosslinked polymers, although the agreement is better for the branched ones. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2009–2018, 2000     

Reaction of phenylacetylene with Ti(OR)4?AlEt3 and V(acac)3?AlEt3: Cyclotrimerization versus chain oligomerization

The polymerization of phenylacetylene with the microheterogeneous Ti(OR)₄? AlEt₃ and homogeneous vanadium acetylacetonate/aluminum triethyl Ziegler–Natta catalyst systems was analyzed. The effects of some cocatalysts (e.g., pyridine and phenylacetylide) and the solvent, temperature, and time were analyzed. Both catalyst systems produced poly(phenylacetylene) (PPA) and a 1,2,4‐triphenylbenzene (1,2,4‐TPB)/1,3,5‐triphenylbenzene (1,3,5‐TPB) cyclotrimer mixture in various molar ratios. The titanium catalyst showed the lowest PPA/triphenylbenzene ratio. The 1,2,4‐TPB/1,3,5‐TPB molar ratio decreased with increasing PPA. On the basis of the spectroscopic data, PPA had a cis–transoidal stereoregular structure. The molecular mass of PPA was determined with vapor pressure osmometry and gel permeation chromatography. A mechanism for the polymerization reaction versus cyclotrimerization was proposed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1228–1237, 2005     

Poly(silylenemethylene)‐based polymer blends. III. Synthesis and properties of polymer blends containing siloxane‐crosslinked poly(silylenemethylene)s

Soft–hard binary polymer blends consisting of amorphous poly(silylene methylene)s (PSMs) and crystalline poly(diphenylsilylenemethylene) were prepared by both melt processing at 360 °C and in situ polymerization at 300 °C. Linear and siloxane‐crosslinked PSMs were used as amorphous components for the purpose of determining how the crosslinks affected the interactions between the component polymers. Differential scanning calorimetry and dynamic mechanical analysis indirectly suggested that discernable differences between the blends containing linear and crosslinked PSMs were attributable to the degree of interactions between the amorphous and crystalline components. The morphological differences between these blends were studied with transmission electron microscopy. The dispersion phase was smaller in the blends containing crosslinked PSM than that in the blends containing linear PSM. This directly indicated that a larger interaction between the amorphous and crystalline phases was obtained by the introduction of crosslinks because of the smaller viscosity difference between the phases and a larger degree of polymer chain entanglement. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 257–263, 2003     

Synthesis and characterization of spherical and hemispherical polyepoxide micrometer‐sized particles of narrow size distribution by a single‐step swelling of uniform polystyrene template microspheres with glycidyl methacrylate

Polystyrene template microspheres of narrow size distribution were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2‐methoxy ethanol. Spherical and hemispherical polystyrene/poly(glycidyl methacrylate) microspheres of narrow size distribution were prepared by a single‐step swelling of the polystyrene template microspheres with the swelling solvent monomer glycidyl methacylate, followed by polymerization of the monomer within the swollen template microspheres at 73 °C. Uniform polystyrene/poly(glycidyl methacylate‐ethylene glycol dimethacrylate) polyepoxide composite microspheres were synthesized similarly, substituting glycidyl methacylate for glycidyl methacylate and ethylene glycol dimethacrylate. Uniform crosslinked poly(glycidyl methacylate‐ethylene glycol dimethacrylate) polyepoxide microspheres have been prepared by dissolution of the PS template polymer of the former composite microspheres. Particles with different properties, for example size, size distribution, shape, surface morphology, surface area, and so forth, were prepared by changing various parameters belonging to the swelling and/or polymerization steps, for example, volume of the swelling monomer/s and/or the swelling solvent dibutyl phthalate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4612–4622, 2007     

Reversible addition–fragmentation chain transfer polymerization of methyl methacrylate in suspension

The reversible addition–fragmentation chain transfer polymerization of methyl methacrylate mediated by 2‐cyanoprop‐2‐yl dithiobenzoate (CPDB) in bulk (60 and 70 °C) and suspension (70 °C) was studied, and in both polymerization systems, a good control of the molecular weight and polydispersity was observed. Stable suspension polymerizations were carried out over a range of CPDB concentrations, and with increasing CPDB concentration, the particle size and polydispersity index of the produced polymer decreased. The former was ascribed to the lower viscosities of the monomer and polymer droplets at low conversions, which caused easier breakup with the applied shear stresses. Lower polydispersity indices at higher CPDB concentrations were probably caused by a diminished gel effect, which was observed at lower CPDB concentrations at high conversions, causing a broadening of the molecular weight distribution. The livingness of the polymers formed in suspension was proven by successful chain extensions with methyl methacrylate, styrene, and 2‐hydroxyethyl methacrylate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2001–2012, 2005     

Thermolyzable polymer networks and star polymers containing a novel,compact, degradable acylal‐based dimethacrylate cross‐linker: Synthesis,characterization, and thermolysis

A compact, cleavable acylal dimethacrylate cross‐linker, 1,1‐ethylenediol dimethacrylate (EDDMA), was synthesized from the anhydrous iron(III) chloride‐catalyzed reaction between methacrylic anhydride and acetaldehyde. The ability of EDDMA to act as cross‐linker was demonstrated by using it for the preparation of one neat cross‐linker network, four star polymers of methyl methacrylate (MMA), and four randomly cross‐linked MMA polymer networks using group transfer polymerization (GTP). For comparison, the corresponding polymer structures based on the commercially available ethylene glycol dimethacrylate (EGDMA) cross‐linker (isomer of EDDMA) were also prepared via GTP. The number of arms of the EDDMA‐based star polymers was lower than that of the corresponding EGDMA polymers, whereas the degrees of swelling in tetrahydrofuran of the EDDMA‐based MMA networks were higher than those of their EGDMA‐based counterparts. Although none of the EDDMA‐containing polymers could be cleanly hydrolyzed under basic or acidic conditions, they could be thermolyzed at 200 °C within 1 day giving lower molecular weight products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5811–5823, 2007     

Investigation of the influence of the architectures of poly(vinyl pyrrolidone) polymers made via the reversible addition–fragmentation chain transfer/macromolecular design via the interchange of xanthates mechanism on the stabilization of suspension polymerizations

Linear, star, and block copolymers based on poly(vinyl pyrrolidone) (PVP) were synthesized with the macromolecular design via the interchange of xanthates (MADIX) process for use as potential stabilizers in suspension polymerization. The design of the leaving group of the dithioxanthate‐based transfer agent was shown to be key to the successful preparation of well‐defined PVP architectures. A linear correlation of the monomer conversion and molecular weight was found in the synthesis of star polymers, whereas the molecular weight distribution remained narrow (polydispersity index < 1.3). Significant side reactions, which typically broaden the molecular weight distribution when R‐designed MADIX agents are used, were absent. The living behavior of the PVP polymerization was furthermore confirmed via chain extension with vinyl acetate, which resulted in the formation of PVP–PVAc block copolymers [where PVAc is poly(vinyl acetate)]. The prepared polymers were used as stabilizers in suspension polymerization to prepare crosslinked poly(vinyl neodecanoate)/ethylene glycol dimethacrylate microspheres. The ratio of the interfacial tension of the aqueous and monomer phases and the overall viscosity were found to have an effect on the diameter of the particles, with PVP star polymers as stabilizers resulting in smaller particles. A smaller interfacial tension, measured when star polymers and block copolymers were used, resulted in the appearance of smaller particles, probably because of more breakup events of the monomer droplets and the enhanced stabilization of the particle surface area. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4372–4383, 2006     

Synthesis and properties of microgel bearing a mercapto group

Vinylbenzyl S-thioacetate ( 1 ) was prepared from thioacetic acid and chloromethylstyrene. Although bulk polymerization of 1 afforded a crosslinked polymer, solution polymerization in chlorobenzene afforded a corresponding soluble polymer. The S-thioacetate group did not react during the radical polymerization of 1 . Bulk copolymerization of 1 with styrene afforded a soluble copolymer when the feed ratio of 1 was lower than 30 mol %. Soap-free emulsion copolymerization of 1 , St, divinylbenzene, and 2-hydroxyethyl methacrylate (66 : 28 : 1 : 5) was carried out in water using 2,2′-azobis (N,N′-dimethyleneisobutyramidine) dichloride as an initiator to afford uniform spherical microgel 2 , whose average diameter was 135 nm. Aminolysis of 2 with an excess amount of butylamine in the presence of sodium tetrahydridoborate followed by treatment with hydrochloric acid resulted in complete removal of the acetyl group to give a slightly distorted spherical microgel (MG-SH) bearing mercapto group. The average diameter of MG-SH was 165 nm. Trans-esterification of p-nitrophenyl acetate ( 3 ) in the presence of triethylamine was efficiently accelerated by the addition of MG-SH. The radical polymerization of methyl methacrylate (MMA) in the presence of suspended MG-SH in chlorobenzene afforded the MMA-grafted microgel. Although MG-SH is a crosslinked gel, it acts as a soluble polymer bearing mercapto group. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1443–1451, 1997     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002