Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Synthesis and evaluation of new dental monomers with both phosphonic and carboxylic acid functional groups

Novel dental monomers containing both phosphonic and carboxylic acid functional groups were prepared. The monomers were based on t‐butyl α‐bromomethacrylate (t‐BuBMA) and synthesized in three steps: The reaction of o‐hydroxyaryl phosphonates [diethyl (2‐hydroxyphenyl) phosphonate, tetraethyl (2,5‐dihydroxy‐1,4‐phenylene) diphosphonate and tetraethyl 5,5′‐(propane‐2,2‐diyl)bis(2‐hydroxy‐5,1‐ phenylene) diphosphonate] with t‐BuBMA, the hydrolysis of phosphonate groups to phosphonic acid using trimethyl silylbromide, and the hydrolysis of the t‐butyl groups to carboxylic acid with trifluoroacetic acid. The monomers were solids and soluble in water and ethanol. The structures of the monomers were determined by Fourier transform infrared (FTIR), ¹H, ¹³C, and ³¹P nuclear magnetic resonance (NMR) spectroscopy. The copolymerization behaviors of the synthesized monomers with glycerol dimethacrylate were first investigated in bulk using photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as photoinitiator. Then, the solution copolymerization of the monomers with acrylamide in ethanol and water was studied, indicating that the synthesized monomers are incorporated into the copolymers. The acidic nature of the aqueous solutions of these monomers (pH values 1.72–1.87) is expected to give them etching properties important for dental applications. The interaction of the monomers with hydroxyapatite was investigated using ¹³C NMR and FTIR techniques. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1953–1965, 2009     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Synthesis and photopolymerization of new dental monomers from o‐hydroxyaryl phosphonates

Novel aromatic mono‐ and diphosphonate monomers based on t‐butyl α‐bromomethacrylate were prepared for use in dental composites. The synthesis of the two monomers involved three steps: the reaction of diethyl phosphite with phenol or hydroquinone, the rearrangement of the resulting phosphate derivatives into o‐hydroxyaryl phosphonates with lithium diisopropylamide, and the reaction of o‐hydroxyaryl phosphonates with t‐butyl α‐bromomethacrylate. Then, the selective hydrolysis of the t‐butyl ester groups of the monomers with trifluoroacetic acid gave the other carboxylic acid containing monomers. The photopolymerization behaviors of the synthesized monomers with glycerol dimethacrylate and triethylene glycol dimethacrylate were investigated with photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as the photoinitiator. The hydrolysis of the t‐butyl groups of the monomers increased the reactivity and the rates of polymerization of the monomers. The mixtures of the acid monomers showed rates of polymerizations similar to those of homopolymerizations of triethylene glycol dimethacrylate and glycerol dimethacrylate. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6775–6781, 2006     

Synthesis and polymerization kinetics of acrylamide phosphonic acids and esters as new dentine adhesives

In restorative dentistry, acrylamide monomers bearing phosphonic acid moieties have proved to be useful species for the formulation of dental self‐etch adhesives since they provide enhanced adhesion to hydroxyapatite and are not subject to hydrolysis, thus potentially improving their adhesive durability. Previous studies have demonstrated that phosphonic acid acrylamides increase the rate of photopolymerization of diacrylamide monomers. To understand whether this rate acceleration is specific to the acrylamide function of the monomer, or due to the phosphonic acid group per se, or is applicable only with a crosslinking reaction, we have synthesized several acrylamide and methacrylate monomers bearing phosphonic acid or phosphonate moieties and studied their photopolymerization kinetics. The acrylamide phosphonic acid was found to accelerate the polymerization rate but similar monomers bearing a phosphonate ester group had a much smaller effect. A similar accelerating effect was observed when the phosphonic acid‐based monomers were copolymerized with a monofunctional acrylamide monomer, excluding the possibility that the rate acceleration might be related to the crosslinking process. This rate effect is also observed when a nonpolymerizable organic phosphonic acid is present in the polymerizing medium. We suggest that the increase of the medium polarity is responsible for this rate enhancement effect. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and polymerizations of six aminophosphonate‐containing methacrylates

Two different groups of novel aminophosphonate‐containing methacrylates were synthesized. The route to the first group involves reactions of ethyl α‐bromomethacryate (EBBr) and t‐butyl α‐bromomethacryate (TBBr) with diethyl aminomethylphosphonate and diethyl 2‐aminoethylphosphonate. Bulk and solution polymerizations at 60–80 °C with 2,2′‐azobis(isobutyronitrile) (AIBN) gave crosslinked or soluble polymers depending on monomer structure and polymerization conditions. Increasing bulkiness from ethyl to t‐butyl decreases the polymerization rate, correlated well with the chemical shift differences of double bond carbons and consistent with the lower molecular weights of t‐butyl ester polymers (M_n = 1800–7900 vs. 50,000–72,000). The route to the second group involves the Michael addition reaction between diethyl aminomethylphosphonate and diethyl 2‐aminoethylphosphonate with 3‐(acryloyloxy)‐2‐hydroxypropyl methacrylate (AHM) to give secondary amines. The photopolymerization using differential scanning calorimeter showed that these monomers have similar or higher reactivities than AHM, even though AHM has two double bonds. The high rates of polymerization of these monomers were attributed to both hydrogen bonding interactions due to additional NH groups as well as chain transfer reactions. All the homopolymers obtained produced char (17–35%) on combustion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and evaluation of new phosphonic acid‐functionalized acrylamides with potential biomedical applications

Phosphorus‐containing acidic monomers are able to interact with the inorganic phase of mineralized tissues such as enamel, dentin, and bone. From this perspective, three phosphonic acid‐containing acrylamide monomers with different lengths of alkyl chains were synthesized to be used for both self‐etching dental adhesives and mineralized hydrogel scaffolds. Monomers were synthesized by the reaction of α‐aminophosphonates (diethyl aminomethylphosphonate, diethyl 2‐aminobutan‐2‐ylphosphonate, and diethyl 2‐aminooctan‐2‐ylphosphonate) with acryloyl chloride followed by the hydrolysis of phosphonate groups by using trimethylsilyl bromide. The properties such as pH in the range of mild self‐etching adhesives, hydrolytic stability, high rate of copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate, giving high‐molecular‐weight polymers on thermal polymerization, and strong decalcification ability of hydroxyapatite make these monomers good candidates for self‐etching adhesives, although no appreciable effect of the number and size of the α‐substituents was observed. Hydrogel scaffolds containing phosphonic acid groups were fabricated, characterized, and mineralized. Altogether, the results suggest that these phosphonic acid‐containing monomers have suitable properties to be used in fabrication of biomaterials for both dental and bone tissue engineering applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2755–2767     

Synthesis,photopolymerization, and adhesive properties of hydrolytically stable phosphonic acid‐containing (meth)acrylamides

Three novel dental monomers containing phosphonic acid groups ( 1a and 2a , based on diethyl amino(phenyl)methylphosphonate and 3a based on diethyl 1‐aminoheptylphosphonate) were synthesized in two steps: the reaction of α‐aminophosphonates with acryloyl chloride (for monomers 1a and 3a ) or methacryloyl chloride (for 2a ) to give monomers with phosphonate groups, and the hydrolysis of phosphonate groups by using trimethyl silylbromide. Their (and the intermediates') structures were confirmed by FTIR, ¹H, ¹³C, and ³¹P NMR spectroscopy. All the monomers dissolve well in water (1<pH<2) and are hydrolytically stable. Their homo‐ and copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate were investigated with photo‐DSC. Thermal polymerization of the new monomers in water or in ethanol/water solution was investigated, giving polymers in good yields. X‐ray diffraction results showed only dicalcium phosphate dehydrate formation upon interaction of 1a ‐ 3a with hydroxyapatite indicating its strong decalcification and that monomer‐Ca salts are highly soluble. Some results were also compared to those with a bisphosphonic acid‐containing methacrylamide ( 4a ) previously reported; and the influence of monomer structure on polymerization/adhesive properties is discussed. These properties, especially hydrolytic stability and good rates of polymerization, make these new monomers suitable candidates as components of dental adhesive mixtures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 511–522     

Hydrophilic graft modification of a commercial crystalline polyolefin

Hydroxy‐functionalized isotactic poly(1‐butene) was synthesized using transition metal‐catalyzed regioselective C? H borylation at the side chain of the commercial polyolefin and subsequent oxidation of the boronic ester functionality. Functionalization up to ～ 19 mol % of the termini of the ethyl side chain occurred without significant side reactions that could alter the polymer chain length. Esterification of the hydroxy group in the polymer with 2‐bromoisobutyl bromide generated a side chain‐functionalized polyolefin macroinitiator. Atom transfer radical polymerization of tert‐butyl acrylate from the macroinitiator produced a high molecular‐weight graft copolymer of the polyolefin, isotactic poly(1‐butene)‐graft‐poly(tert‐butyl acrylate) (PB‐g‐PtBA). Finally, the hydrolysis of the tert‐butoxy ester group of PB‐g‐PtBA created an amphiphilic polyolefin, isotactic poly(1‐butene)‐graft‐poly(acrylic acid), which contained a short carboxylic acid‐functionalized polymer block at the side chain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3533–3545, 2008     

Amphiphilic star‐block copolymers based on a hyperbranched core: Synthesis and supramolecular self‐assembly

Novel amphiphilic star‐block copolymers, star poly(caprolactone)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] and poly(caprolactone)‐block‐poly(methacrylic acid), with hyperbranched poly(2‐hydroxyethyl methacrylate) (PHEMA–OH) as a core moiety were synthesized and characterized. The star‐block copolymers were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization (ATRP). First, hyperbranched PHEMA–OH with 18 hydroxyl end groups on average was used as an initiator for the ring‐opening polymerization of ε‐caprolactone to produce PHEMA–PCL star homopolymers [PHEMA = poly(2‐hydroxyethyl methacrylate); PCL = poly(caprolactone)]. Next, the hydroxyl end groups of PHEMA–PCL were converted to 2‐bromoesters, and this gave rise to macroinitiator PHEMA–PCL–Br for ATRP. Then, 2‐dimethylaminoethyl methacrylate or tert‐butyl methacrylate was polymerized from the macroinitiators, and this afforded the star‐block copolymers PHEMA–PCL–PDMA [PDMA = poly(2‐dimethylaminoethyl methacrylate)] and PHEMA–PCL–PtBMA [PtBMA = poly(tert‐butyl methacrylate)]. Characterization by gel permeation chromatography and nuclear magnetic resonance confirmed the expected molecular structure. The hydrolysis of tert‐butyl ester groups of the poly(tert‐butyl methacrylate) blocks gave the star‐block copolymer PHEMA–PCL–PMAA [PMAA = poly(methacrylic acid)]. These amphiphilic star‐block copolymers could self‐assemble into spherical micelles, as characterized by dynamic light scattering and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6534–6544, 2005     

Synthesis and polymerizations of phosphonated‐bis(methacrylamide)s for dental applications

Novel phosphonate and phosphonic acid‐containing bis(methacrylamide)s were synthesized. The phosphonate‐containing monomers ( 1a and 1b ) were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride with diethyl 2‐aminoethylphosphonate and diethyl 1‐aminomethylphosphonate. The phosphonic acid‐containing monomers ( 2a and 2b ) were synthesized by hydrolysis of 1a and 1b with trimethylsilyl bromide (TMSBr). All monomers were liquids and dissolved in water and ethanol. Thermal homopolymerization of 1a and 1b in bulk and solution using 2,2′‐azobis(isobutyronitrile) (AIBN) at 80 °C gave crosslinked polymers indicating low cyclization tendencies of these monomers. They were also homopolymerized using photo‐DSC with 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitator, and their maximum rates of polymerization were found to be higher than commercial monomers 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (Bis‐GMA) and 2‐hydroxyethyl methacrylate (HEMA), indicating their potential as reactive diluents or crosslinkers in dental materials. In fact, copolymerization with monomer 1a resulted in improvements in photopolymerization kinetics of both Bis‐GMA and HEMA. The acidic nature of the aqueous solutions (pH of 2a : 1.42, 2b : 1.53), stability under aqueous conditions after 1 month of study at 37 °C, interaction of 2a with hydroxyapatite (HAP) as representative of both monomers, and copolymerizability of the same with HEMA make these monomers suitable as adhesive monomers in dental adhesives, although their low observed reactivities may present a drawback. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of phosphonate‐containing polysiloxanes

Phosphonate‐functionalized polysiloxanes have been prepared with a new siloxane/phosphonate monomer. The reaction of 3‐chloropropylmethyldimethoxysilane with trimethylphosphite or triethylphosphite produces several new monomers containing pendant phosphonate groups. Copolymerization with dimethyldimethoxysilane has produced polymers soluble in most organic solvents. The acid hydrolysis of the phosphoryl esters has produced hydrophilic siloxane polymers containing phosphonic acid groups. The thermal properties of the polymers and several related small molecules have been compared with thermogravimetric analysis. Both the monomers and the resulting polymers have been characterized with ¹H, ¹³C, ³¹P, and ²⁹Si NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 48–59, 2003     

Synthesis and photopolymerizations of first monomers with phosphonate and bisphosphonate or phosphonic and bisphosphonic acid functionalities for potential dental applications

The first monomers containing both phosphonate and bisphosphonate (M1) or phosphonic and bisphosphonic acid (M2) functionalities are synthesized, aiming to improve binding abilities of self-etching adhesive systems and composites: An amine having both phosphonate and bisphosphonate functionalities is prepared via Michael addition reaction between diethyl (6-aminohexyl)phosphonate and tetraethyl vinylidene bisphosphonate, its reaction with 2-isocyanatoethyl methacrylate gives M1 which is converted to M2 by selective dealkylation of the phosphonate/bisphosphonate ester groups. Their copolymerization with commercial dental monomers (bisphenol A glycidyl methacrylate, triethylene glycol dimethacrylate, and 2-hydroxyethyl methacrylate) investigated by photo-differential scanning calorimetry shows adequate photopolymerization rate and conversion. X-ray diffraction, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses of M2-treated hydroxyapatite particles show formation of stable M2-calcium salts. These monomers are assessed to be not toxic according to MTT standards by in vitro cytotoxicity studies with NIH 3T3, U2OS, and Saos-2 cells. All these properties make these monomers potential candidates as biocompatible components for dental adhesives and composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2739–2751     

Synthesis of ω‐phosphonated poly(ethylene oxide)s through the combination of kabachnik–fields reaction and “click” chemistry

The synthesis of new ω‐phosphonic acid‐terminated poly(ethylene oxide) (PEOs) monomethyl ethers was investigated by the combination of Atherton–Todd or Kabachnik–Fields reactions and the “click” copper‐catalyzed 1,3‐dipolar cycloaddition of azides and terminal alkynes. The Atherton–Todd route fails to give the corresponding phosphonic acid‐terminated PEOs due to competitive cleavage of the P? N bond during the dealkylation step. In contrast, the Kabachnik–Fields route leads with very good yields to ω‐phosphonic acid‐PEO through “click” reaction of azido‐PEO onto dimethyl aminopropargyl phosphonate prepared by Kabachnik–Fields reaction between propargylbenzylimine and dimethyl phosphonate, followed by acidic hydrolysis. The reported methodology, precluding the use of anionic polymerization of ethylene oxide, leads to novel well‐defined phosphonic acid‐terminated PEOs from commercially available products in good yields. Moreover, such a strategy can be adapted to anchor phosphonic acid functionality onto a wide range of polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of anionic amphiphilic carbosilane block copolymer: Poly(1,1‐diethylsilacyclobutane‐block‐methacrylic acid)

An amphiphilic block copolymer of silacyclobutane and methacrylic acid (MAA) was synthesized via a living anionic polymerization of 1,1‐diethylsilacylcobutane (EtSB). Sequential addition of 1,1‐diphenylethylene and t‐butyl methacrylate (tBMA) to living poly(EtSB) in the presence of lithium chloride gave poly(EtSB‐block‐tBMA) with narrow molecular weight distributions. The t‐butyl ester groups in the obtained polymer were readily hydrolyzed via heating in 1,4‐dioxane in the presence of concentrated aqueous hydrochloric acid. The block copolymer with a short MAA segment was soluble in chloroform and insoluble in methanol and basic water, whereas the block copolymer with a long MAA segment was soluble in methanol and basic water and insoluble in chloroform. The block polymer (EtSB/tBMA = 45/60) formed a monolayer film on the water surface; this was confirmed by surface pressure measurement. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 86–92, 2001     

Synthesis and characterization of rigid functional anionic polyelectrolytes: Block copolymers and star homopolymers

Seven cyclolinear polymers bearing the tertiary‐butyl α‐(hydroxymethyl)acrylate (TBHMA) ether dimer were prepared using reversible addition–fragmentation chain transfer (RAFT) polymerization. Of the seven polymers, five were cyclolinear homopolymers of the TBHMA ether dimer with different degrees of polymerization, one was an “arm‐first” star homopolymer, and the other was an amphiphilic linear copolymer based on the positively ionizable hydrophilic 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and the TBHMA ether dimer. For comparison, two more polymers were prepared using RAFT polymerization where the TBHMA ether dimer was replaced by tertiary‐butyl methacrylate (tBuMA). In particular, an amphiphilic linear DMAEMA–tBuMA diblock copolymer and a tBuMA arm‐first star homopolymer were also synthesized. All polymers were characterized in terms of their molecular weights and composition using gel permeation chromatography and ¹H NMR spectroscopy, respectively. Subsequently, the tertiary‐butyl groups of the TBHMA ether dimer units and those of the tBuMA units were cleaved by hydrolysis to yield carboxylic acid groups. The successful removal of the tertiary‐butyl groups was confirmed using ¹H and ¹³C NMR and attenuated total reflectance‐Fourier transform infrared spectroscopies. The hydrolyzed (co)polymers exhibited pK values of the carboxylic acid groups of around 4.5, and glass transition temperatures, T_g, of around 200 °C, which were 50 °C higher than those of their nonhydrolyzed precursors. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and photopolymerizations of new phosphonated monomers for dental applications

Three novel phosphonated methacrylate monomers have been synthesized and studied for use in dental applications. Two of the monomers were synthesized from the reactions of glycidyl methacrylate (GMA) with (diethoxy‐phosphoryl)‐acetic acid (monomer 1 ) and (2‐hydroxy‐ethyl)‐phosphonic acid dimethyl ester (monomer 2 ). These monomers showed high crosslinking tendencies during thermal bulk and solution polymerizations. The third monomer (monomer 3 ) was prepared by the reaction of bisphenol A diglycidylether (DER) with (diethoxy‐phosphoryl)‐acetic acid and subsequent conversion of the resulting diol to the methacrylate with methacryloyl chloride. The homopolymerization and copolymerization behaviors of the synthesized monomers were also investigated with glycerol dimethacrylate (GDMA), triethylene glycol dimethacrylate (TEGDMA), and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (bis‐GMA) using photodifferential scanning calorimetry at 40 °C using 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitiator. Monomer 1 showed polymerization rate similar or greater than dimethacrylates studied here but with higher conversion. The maximum rate of polymerizations decreased in the following order: 1 ～TEGDMA>GDMA～bis‐GMA～ 3 > 2 . A synergistic effect in the rate of polymerization was observed during copolymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2290–2299, 2008     

Pd‐initiated polymerization of diazo compounds bearing dialkoxyphosphinyl group and hydrolysis of the resulting polymers and oligomers to afford phosphonic acid‐containing products

Pd‐initiated polymerization and oligomerization of diazo compounds containing a dialkoxyphosphinyl group are described. Polymerization of 2‐dialkoxyphosphinylethyl diazoacetates with π‐allylPdCl‐based initiating systems afforded C? C main chain polymers bearing phosphonate on each main chain carbon atom. The quantitative transformation of the side chain phosphonate to phosphonic acid resulted in the formation of water soluble polymers having the acid groups accumulated around their main chains, although the carbonyl ester linkage in the side chain was cleaved via intramolecular acid‐assisted hydrolysis in water at 80 °C. Pd‐initiated oligomerization of diethyl diazomethylphosphonate yielded an oligomeric product bearing diethoxyphosphiny groups directly attached to its main chain carbons, with unexpected incorporation of azo group in the main chain framework. Hydrolysis of the phosphonate of the oligomer afforded a water‐soluble product, which was revealed to show higher proton conductivity than poly(vinylphosphonic acid) under certain conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1742–1751     

Cyclocopolymerization of allyl‐acrylate quaternary ammonium salts with diallyldimethylammonium chloride

A series of copolymers of N,N‐dialkyl‐N‐2‐(methoxycarbonyl)allyl allyl ammonium chloride, N,N‐dialkyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride, and N,N‐dialkyl‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide with diallyldimethylammonium chloride (DADMAC) were prepared in water at 60 °C with 2,2′‐azo‐bis(2‐amidinopropane)dihydrochloride. A strong effect of ester substituents on cyclopolymerization was observed. The methyl and ethyl ester monomers showed high cyclization efficiencies during homopolymerizations and copolymerizations. Unexpectedly, the t‐butyl ester derivatives showed high crosslinking tendencies. Water‐soluble copolymers were obtained only with a decrease in the molar fraction of t‐butyl ester monomer below 30%. Relative reactivities of the allyl‐acrylate monomers in photopolymerizations were compared with the relative reactivity of DADMAC. Allyl‐acrylate monomers were much more reactive than DADMAC; the photopolymerization rate decreased in the following order: N,N‐morpholine‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide > N,N‐piperidyl‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide > N,N‐dibutyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride > N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride ∼ N,N‐morpholine‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride ∼ N,N‐piperidyl‐N‐2‐(methoxycarbonyl)allyl allyl ammonium chloride > N‐methyl‐N‐butyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride. Intrinsic viscosities of the polymers measured in 0.09 M NaCl ranged from 1.06 to 3.20 dL/g. The highest viscosities were obtained for copolymers of the t‐butyl ester monomers with piperidine and morpholine substituents. The copolymer of the t‐butyl ester with piperidine substituent and DADMAC was hydrolyzed in acid to give a polymer with zwitterionic character. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 640–649, 2001     

Improving mechanical properties and chemical resistance of ink‐jet printer color filter by using diblock polymeric dispersants

The diblock copolymers of polystyrene and poly(tert‐butyl acrylate) (PSt‐b‐PtBA) with various molecular weights and hydrophobic/hydrophilic (styrene/acrylic acid) chain length were prepared by atom transfer radical polymerization (ATRP). Selective hydrolysis of the diblock copolymers (PSt‐b‐PtBA) resulted in amphiphilic block copolymers of polystyrene and poly(acrylic acid) (PSt‐b‐PAA). The amphiphilic block copolymers of PSt‐b‐PAA with average molecular weight (M_n) <7500 were proved to be critical in dispersing the pigments of UV curable ink‐jet inks for manufacturing the color filter. Incorporating DB2 diblock copolymer dispersants with styrene/acrylic acid ratio at 1.5 allowed more UV curable compositions in the red and blue inks without deteriorating pigment dispersing stability and jetting properties of the ink‐jet inks. The ink drops can be precisely ejected into the tiny color area. Better properties of the cured red stripe such as nanoindentation hardness and chemical resistance were found. The competing absorption of UV light by the blue pigment hindered the through cure of monomers near the interface between glass substrate and the blue stripe. This leads to lower hardness and poor chemical resistance of the UV cured blue stripe. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3337–3353, 2005