Preparation and characterization of covalently bonded PVA/Laponite/HAPI nanocomposite multilayer freestanding films by layer‐by‐layer assembly

The layer‐by‐layer (LBL) assembly technique is an attractive method to make functional multilayer thin films and has been applied to fabricate a wide range of materials. LBL materials could improve optical transmittance and mechanical properties if the film components were covalently bonded. Covalently bonded nanocomposite multilayer films were prepared by employing hydrophilic aliphatic polyisocyanate (HAPI) as the reactive component, to react with Laponite and polyvinyl alcohol (PVA). FT‐IR spectra suggested that HAPI reacted with Laponite and PVA at ambient temperature rapidly. Ellipsometry measurement showed that the film thickness was in linear growth. The influences of HAPI on the optical, mechanical and thermal properties of the films were investigated by UV‐Vis spectroscopy, tensile stress measurement, DSC and TGA. The obtained results showed that the optical transmittance and mechanical strength were enhanced when the film components were covalently bonded by HAPI. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 545–551     

Electropolymerization of layer‐by‐layer precursor polymer films

The layer‐by‐layer (LbL) self‐assembly has been used to fabricate polymer thin films on any solid substrates. The multilayer polymer thin films are constructed by alternating adsorption of anionic and cationic polymers. Polyelectrolyte multilayer ultrathin films containing anionic poly[2‐(thiophen‐3‐yl)ethyl methacrylate‐co‐methacrylic acid]; P(TEM‐co‐MA) and cationic poly[4‐(9H‐carbazol‐9‐yl)‐N‐butyl‐4‐vinyl pyridium bromide]; P4VPCBZ, were fabricated. The growth of multilayer ultrathin films was followed by UV–Vis absorption spectrophotometer and surface plasmon resonance spectroscopy (SPR). The deposition of P(TEM‐co‐MA)/P4VPCBZ as multilayer self‐assembled ultrathin films regularly grow which showed linear growth of absorbance and thickness with increasing the number of layer pair. Cross‐linking of the layers was verified by cyclic voltammetry (CV), UV–Vis spectrophotometry and electrochemical surface plasmon resonance (EC‐SPR) spectroscopy with good electro‐copolymerizability. This was verified by spectroelectrochemistry. The SPR angular‐reflectivity measurement resulted in shifts to a higher reflectivity according to the change in the dielectric constant of the electropolymerized film. Copyright © 2011 John Wiley & Sons, Ltd.     

Stimuli‐responsive micelles of amphiphilic AMPS‐b‐AAL copolymers in layer‐by‐layer films

Aqueous reversible addition‐fragmentation chain transfer polymerization was used to synthesize poly(N‐[3‐(dimethylamino)propyl]acrylamide) (PDMAPA) cationic homopolymers and micelle‐forming, pH‐responsive, amphiphilic diblock copolymers of poly(sodium 2‐acrylamido‐2‐methyl‐1‐propanesulfonate‐block‐N‐acryloyl‐L ‐alanine) (P(AMPS‐b‐AAL)). At low pH, the AAL blocks are protonated rendering them hydrophobic, whereas the AMPS blocks remain anionically charged because of the pendant sulfonate groups. Self‐assembly results in core–shell micelles consisting of hydrophobic cores of AAL and negatively charged shells of AMPS. Using solutions of these micelles with anionic coronas and of the cationic homopolymer PDMAPA, layer‐by‐layer (LbL) films were assembled at low pH, maintaining the micelle structures. Several block copolymers with varying AMPS and AAL block lengths were synthesized and used in the formation of LbL films. The thickness and morphology of the films were examined using ellipsometry and atomic force microscopy. The stimuli‐responsive behavior can be triggered by submersion of the film in water at neutral pH to disrupt the micelles. This behavior was monitored by observing the decrease in film thickness and alteration of the film morphology. The micelles were also loaded with a model hydrophobic compound, pyrene, and incorporated into LbL films. The release of pyrene from the films was monitored by fluorescence spectroscopy at varying pH values (1, 3, 5, and 7). As the pH of the solution increases, the rate of release increases. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The fabrication of layer‐by‐layer mode LaCoO3 film by pulsed laser deposition

The relationship between strain and growth conditions in LaCoO₃ thin film was obtained to control the magnetic‐electric characteristics. The LaCoO₃ thin films on the SrTiO₃ substrates have been achieved by the pulsed laser deposition method, and the reflection high‐energy electron diffraction method (RHEED) was applied to monitor the growth process in situ; the layer‐by‐layer growth mode was discovered. The X‐ray diffraction and atomic force microscopy were applied to the phase analysis, and the layer thickness and the layer‐by‐layer growth mode were uncovered. Compared with the 100‐nm LaCoO₃ thin films, the strain in the layer‐by‐layer ultra thin film was more controllable. The enhanced magnetic properties of the layer‐by‐layer mode ultra‐thin films could be tested in future work.     

Hydrophobically modified polyelectrolyte for improved oxygen barrier in nanobrick wall multilayer thin films

The influence of attaching hydrophobic side groups to a polyelectrolyte, used for deposition of a multilayer oxygen gas barrier thin film, was investigated. Polyethyleneimine (PEI) was labeled with pyrene and deposited in “quadlayers” of PEI, poly(acrylic acid), PEI, and sodium montmorillonite clay using layer‐by‐layer assembly. Thin films made of three repeating quadlayers using unmodified PEI had much lower density (1.24 g/cm³) than pyrene‐labeled PEI‐based films (1.45 g/cm³), which is believed to be the result of greater chain coiling from the increased hydrophobicity of pendant pyrene groups. This increased density in pyrene‐labeled PEI layers allowed three quadlayers to match the oxygen transmission rate of a four quadlayer film made with unmodified PEI. This discovery provides an additional tool for tailoring the barrier behavior of clay‐based multilayer thin films that could prove useful for a variety of packaging applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1153–1156     

Photocatalytically Active Polyelectrolyte/Nanoparticle Films for the Elimination of a Model Odorous Gas

Virtually transparent films of Aeroxide TiO₂ P25 were fabricated via layer‐by‐layer assembly with sodium poly(styrene sulfonate). Nanoscale films are formed on model surfaces for characterization or inside of cylindrical reactors for investigating the catalytic properties. Films are fairly homogeneous and smooth over large areas and show different optical interference colors depending on film thickness. The application‐relevant photocatalytic performance of such films toward on‐flow degradation of hydrogen sulfide under UV‐A irradiation was investigated. Scanning electron microscopy reveals a nanoporous structure allowing for the permeation of gas. Consequently, the catalytic efficiency of the films increases with increasing film thickness retaining a considerable activity of the corresponding nanoparticle powder. Scheme 1 depicts in a general way the functionalized reactor and the principle of the measurement.     

Influence of graphene oxide incorporation and chemical cross‐linking on structure and mechanical properties of layer‐by‐layer assembled poly(Vinyl alcohol)‐Laponite free‐standing films

Functional fillers in multilayered films provide opportunity in tailoring the mechanical properties through chemical cross‐linking. In this study, Laponite‐graphene oxide co‐dispersion was used to incorporate graphene oxide (GO) easily into polyvinyl alcohol (PVA)/Laponite layer‐by‐layer (LBL) films. The LBL films were found to be uniform and the layer thickness increased linearly with number of depositions. The process was extended to a large number of depositions to investigate the macroscopic mechanical properties of the free‐standing films. The LBL films showed remarkable improvements in mechanical properties as compared to neat PVA film. The GO‐incorporated LBL films displayed higher enhancements in the tensile strength, ductility, and toughness as compared to that of PVA/Laponite LBL films, upon chemical cross‐linking. This suggests the advantageous effects of GO incorporation. Interestingly, cross‐linking of LBL films for longer time period (>1 h) and higher temperature (～80 °C) was not found to be much beneficial. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2377–2387     

Role of architecture and molecular weight in the formation of tailor‐made ultrathin multilayers using dendritic macromolecules and click chemistry

The high efficiency and mild reaction conditions associated with the Cu(I) catalyzed cycloaddition of azides and alkynes were exploited for the covalent layer‐by‐layer synthesis of dendritic thin films on silicon wafers. The preparation of azide and alkyne‐terminated dendrimers based on bisMPA was accomplished by a divergent strategy; combinations of these monodisperse building blocks from the 2nd to the 5th generation were used for construction of the thin films. The layer‐by‐layer self assembly process proceeds under ambient conditions and was monitored by ellipsometry, XPS, and ATR‐IR, which showed extremely regular growth of the dendritic thin films. Film thickness could be accurately controlled by both the size/generation number of the dendrimers as well as the number of layers. In comparison with linear analogues, the growth of the dendritic films was significantly more controlled and defect‐free with each layer being thinner than the corresponding films prepared from the isomeric linear polymers, demonstrating the well‐defined, three‐dimensional nature of the dendritic architecture. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2835–2846, 2007     

Molecular structure and thickness dependence of chain orientation in aromatic polyimide films

Degrees of orientation of main chains and imide rings were quantitatively estimated for spin‐coated films of six kinds of aromatic polyimides (PIs) using polarized attenuated total reflection (ATR)/Fourier transform infrared (FT‐IR) spectroscopy. The degrees of chain orientation parallel to the film planes are significantly larger for the PIs having rigid structures than those having flexible structures, and the introduction of side groups decrease the degrees of chain orientation. In contrast, the rotational orientations of imide rings are almost isotropic for all PI films. Moreover, the film thickness dependences of the degrees of orientation were investigated for two kinds of rigid‐rod PIs having bulky trifluoromethyl ( CF₃) side groups in their diamine moieties. The degrees of chain orientation slightly decrease as the film thickness increases, whereas the rotational orientation of imide rings is independent of the film thickness. The degrees of chain orientation on the substrate sides significantly differ from the atmospheric sides of PI films. This difference was generated during thermal imidization because of tensile stress originated from the mismatch in thermal expansion coefficients between the substrates and the PI films. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2109–2120, 2005     

Layer—by—layer Multilaryer Films Self—assembled from a Rare—earth—containing Poly—oxometalate,Na9[Eu（W5O18）2] and Poly （allylamine hydrochloride） and Their Photoluminescent Properties

Ultrathin multilayer films of a rare-earth-containing polyoxometalate Na9[Eu(W5O18)2](EW) and poly (allymamine hydrochloride)(PAH) have been prepared by layer-by-layer self-assembly from dilute aqueous solution.The fabrication process of the EW/PAH multilaryer films was followed by UV-vis spectroscopy and ellipsometry,which show that the deposition process is linear and highly reproducible from layer to layer.An average EW/PAH bilayer thickness of ca.2.1nm was determined by ellipsometry.In addition,the scanning electron microscopy(SEM) image of the EW/PAH film indicates that the film surface is relatively uniform and smooth.The photoluminescent properties of these films were also investigated by fluorescence spectroscopy.     

Interlocking layer structures formed in spin‐cast polymer blend films by surface segregation and self‐stratification

Surface morphologies formed by the phase segregation of poly(styrene‐b‐ethylene/butylene‐b‐styrene) (SEBS)/poly(methyl methacrylate) (PMMA) blend films prepared via spin coating on mica substrates were studied with atomic force microscopy accompanied by a solvent extraction treatment, X‐ray photoelectron spectroscopy, and contact‐angle measurements. Three kinds of surface structures of films were observed. Besides the ribbonlike morphology and the dispersed domains in a continuous matrix that are common in this field, we found a special interlocking layer structure characterized by a smooth SEBS layer as the cover on the top and a layer composed of hill‐like PMMA dispersed in the SEBS matrix at the bottom when the composition of the film was around 50:50 SEBS and PMMA. A series of blend films with different thicknesses were then prepared to investigate the interfacial structure, and the formation process of the interlocking layer, which could be elucidated by a schematic diagram, was discussed. The interlocking bilayer film with SEBS on the top possessed high thermal stability and the best surface roughness in comparison with other structures. It might find important technical applications in fields such as adhesion, lubrication, and protective coatings. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 532–543, 2007.     

Self‐Assembled Regenerated Cellulose Spacer Film in Thin Film and Generator‐Collector Electrodes

Reconstituted cellulose spontaneously self‐assembles at surfaces from an alkaline cellulose solution (ca. 1 wt%, pH 14, prepared with an enzymatic method from wood pulp) into porous films with approximately 300 nm thickness per layer, for example onto immersed tin‐doped indium oxide (ITO) electrodes. Sequential multi‐layer deposition allows control over the thickness of the assembled films. The hydrophilic properties of the cellulose film electrodes are utilised here (i) as dip‐probe with capillary force picking up sample solution and (ii) as flow‐through generator‐collector probe, for example for future application in in situ chromatographic separation in end‐column detection with nano‐molar sensitivity.     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Photoactivity Characteristics of a Biodevice Using Primary Photosynthetic Reaction Centers

Films with alternating layers of thylakoid membrane from the cyanobacterium Spirulina platensis and the positively charged polyion poly(ethylenimine) (PEI) were prepared by means of alternate electrostatic layer‐by‐layer assembly. The thylakoid membrane/PEI bilayers were functionally and structurally characterized by visible spectra, electrochemical methods and SEM techniques, respectively. The films deposited onto gold electrodes were molecularly smooth and consistent with thylakoid membrane/PEI bilayers as observed by SEM. The photoactivity of the thylakoid membrane/PEI assembly was dependent on thickness of the film that increased with the number of bilayers. There was an obvious difference in the current responses of 1‐ and 5‐bilayer thylakoid membrane/PEI films under illumination. The photosynthetic electron transfer process in the thylakoid membrane/PEI single‐bilayer film was demonstrated by an inhibition of the photoactivity by herbicide. Biodevices for the detection of phytotoxicity were constructed using the isolated thylakoid membrane from chloroplast as biosensing elements by means of electrostatic layer‐by‐layer assembly.     

Influence of Side‐Chain Composition on Polythiophene Properties and Supramolecular Assembly of Anionic Polythiophene Derivatives

A series of 10 polythiophene derivatives is reported, in which each polymer has a different percentage of carboxylic acid‐bearing repeat units. The properties of these polymers are explored under acidic conditions, where the carboxylic acid moieties remain neutral, and under basic conditions, where the carboxylic acid units become anionic carboxylates. The properties that are examined for both solutions and films include UV–vis absorption spectroscopy, photoluminescence spectroscopy, and red‐edge optical band gaps. All the properties studied are strongly dependent both on protonation state and percentage of carboxylic acid/carboxylate side chains along the polymer backbone. The anionic form of each polythiophene derivative was also used in layer‐by‐layer film deposition with a cationic phosphonium polyelectrolyte. The film growth process was studied by spectroscopic techniques to assess the influence of side‐chain composition on the film growth and optical properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Electrochemical Investigation of Myoglobin in Layer‐by‐Layer Films Assembled with Sulfonated‐β‐Cyclodextrin

In this work, myoglobin (Mb) and sulfonated‐β‐cyclodextrin (S‐CD) were assembled into {S‐CD/Mb}_n layer‐by‐layer films on solid substrates. In pH 7.0 buffers, the {S‐CD/Mb}_n films assembled on electrodes showed a pair of well‐defined and nearly reversible CV peaks at about ?0.35 V vs. SCE. The stable CV response of {S‐CD/Mb}_n films could be used to electrocatalyze reduction of oxygen and hydrogen peroxide in solution. For comparison, another modified β‐cyclodextrin, carboxyethyl‐β‐cyclodextrin (C‐CD), was also assembled with Mb into {C‐CD/Mb}_n multilayer films. The driving forces of the assembly were explored and discussed.     

Reflection–absorption infrared spectroscopy investigation of the crystallization kinetics of poly(ethylene terephthalate) ultrathin films

Reflection–absorption infrared spectroscopy was used to study the crystallization behavior of poly(ethylene terephthalate) (PET) ultrathin films. The crystallinity of ultrathin films was estimated by the fraction of trans conformers of PET. The isothermal and nonisothermal crystallization kinetics of ultrathin films with different thicknesses were investigated. The thinner PET film showed slower kinetics during isothermal crystallization than the thicker film. Moreover, the final crystallinity of films with various thicknesses were reduced with decreasing thickness. An Avrami equation was used to fit the acquired results. The Avrami exponents decreased with the film thickness. As for the nonisothermal crystallization, the cold‐crystallization starting temperature shifted to a lower temperature as the film thickness increased. The influence of the substrate on the crystallization kinetics of the films was also studied. The half‐crystallization times and final crystallinities of ultrathin films adsorbed onto a self‐assembled‐monolayer‐treated surface and an untreated substrate were clearly different, although their thickness dependence was similar. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4440–4447, 2004     

Observation of surface contamination layer by X‐ray reflectometry (XRR) analyses

Ultra‐thin HfO₂ films of 3.5, 5.0, and 8.0 nm nominal thicknesses were prepared, respectively, on silicon substrates by using atomic layer deposition method. Through the analyses of X‐ray reflectometry (XRR), X‐ray photoelectron spectroscopy, and transmission electron microscopy for HfO₂ films with and without sample cleaning, the effects of surface contamination on XRR curve and film thickness were investigated, and contamination layer was observed and the thickness of the layer was determined. X‐ray photoelectron spectroscopy results indicated that the amount of surface contamination varied considerably because of the surface cleaning. XRR curve shapes and the positions of thickness fringes changed and the thickness from Fourier analyses of the curves were different for the same sample due to the different surface contamination. Contamination layer of about 1 nm thickness was observed by Fourier analysis of XRR curve. Simulation for XRR curve showed the best fit to data when contamination layer of about 1 nm thickness was considered, and the result was consistent with that of the Fourier analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

Highly selective multilayer polymer thin films for CO2/N2 separation

Multilayer thin films of poly(ethylene oxide) (PEO) and poly(methacrylic acid) (PMAA), deposited via layer‐by‐layer (LbL) assembly from aqueous solutions, are investigated for CO₂/N₂ separation. Eight and ten bilayer (217 and 389 nm thick, respectively) PEO/PMAA thin films deposited on a 25 μm polystyrene substrate exhibit CO₂/N₂ selectivities of 142 and 136, respectively. These are the highest reported to‐date for this gas pair separation using a homogeneous polymer film. While further work remains to improve CO₂ permeability, these results indicate the potential of LbL assemblies as standalone CO₂ separation membranes for low‐flux/high‐purity applications, or as part of a composite and/or mixed‐matrix membrane for high‐flux applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1730–1737     

Assembly of Graphene Nanosheets and SiO2 Nanoparticles Towards Transparent,Antireflective, Conductive,and Superhydrophilic Multifunctional Hybrid Films

A new approach for the fabrication of transparent, antireflective, conductive and superhydrophilic multifunctional hybrid films through the layer‐by‐layer (LbL) assembly of reduced graphene oxide (RGO) nanosheets and SiO₂ nanoparticles is reported. The RGO nanosheets, SiO₂ nanoparticles and films were characterized by means of transmission electron microscopy, UV/Vis absorption spectrophotometry, Raman spectroscopy, atomic force microscopy, contact angle/interface system, and a four‐point probe. It was found that the graphene/SiO₂ hybrid films exhibited a significant increase in transmittance as compared with RGO films. The optical, electronic and wetting properties of hybrid films could be manipulated by rational design of the film structure and variation of the cycle number of the LbL assembly. The obtained transparent, conductive, and superhydrophilic graphene/SiO₂ hybrid films showed excellent antireflective, antistatic, and antifogging behaviors. The remarkable performance could be attributed to the combination of electrical conductivity of RGO nanosheets and superhydrophilic antireflective surface derived from SiO₂ nanoparticles.