Study on δ‐form complex in syndiotactic polystyrene–organic molecules systems. IV. Formation of complexes with a mixture of solvents and structural changes during the sorption of solvents by syndiotactic polystyrene mesophase membranes

The syndiotactic polystyrene (sPS) δ form was crystallized from mixtures with different compositions of p‐chlorotoluene–chlorobenzene (p‐CT–CB) and p‐chlorotoluene–1,1,2‐trichloroethane (p‐CT–TCE). The presence of the δ form and TTGG helical conformation was confirmed by Fourier transform infrared and wide‐angle X‐ray diffraction (WAXD) analyses. In sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes, the relative absorbance (RA) of the p‐chlorotoluene (p‐CT) solvent peak was very high even at very low concentrations of p‐CT in comparison with the RA of higher concentrations of chlorobenzene (CB) or 1,1,2‐trichloroethane (TCE) in the mixtures. However, the RAs of both CB and TCE solvent peaks decreased with decreasing concentrations of CB and TCE in the mixtures. A negligible decrease in the RA of the TTGG helical content was observed with a decreasing concentration of CB or TCE. The WAXD results showed that the 2θ peak positions of the [010] and [ 10] planes of the sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes appeared in the same position and were almost equal to those of the sPS–p‐CT δ‐form membrane. The mesophases of the sPS–p‐CT [p‐CT (A‐M)] and sPS–TCE [TCE (A‐M)] membranes were used for the sorption studies with different concentrations of various solvents. The sorption amount of aromatic solvents by both p‐CT (A‐M) and TCE (A‐M) mesophase membranes was higher than that of aliphatic solvents, regardless of the size, shape, and nature of the molecular cavity. The 2θ peak of the [010] plane of the sPS membranes slowly approached the original δ‐form value when the sPS mesophase membranes were immersed in various solvents of different concentrations for 48 h. The shifting of the 2θ peak of the [010] plane to the original δ form depended on the nature and concentration of the immersion solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2380–2387, 2005     

Structure and properties of the mesophase of syndiotactic polystyrene. VIII. Solvent sorption behavior of syndiotactic polystyrene/p‐chlorotoluene mesophase membranes

A crystalline δ form of a syndiotactic polystyrene (sPS) membrane was prepared from a solution of sPS (1 wt %) and p‐chlorotoluene (p‐CT) by a solution‐casting method. The mesophase (δ empty form) of sPS was obtained by the extraction of the guest solvent from the δ form of sPS by a stepwise solvent‐extraction method. The sPS/p‐CT mesophase membrane [p‐CT (A‐M)] was used for the sorption of 1 mol % p‐CT for different times and for the sorption of different concentrations of p‐CT, chlorobenzene (CB), p‐xylene (p‐X), toluene, and chloroform for 48 h. The presence of solvents in the sPS membrane was confirmed by IR analysis. A thermal study revealed that the sorption amount of 1 mol % p‐CT increased with increasing immersion time, and the sorption amounts of different solvents increased with increasing solvent concentration. Differential scanning calorimetry results showed that the desorption peak temperature increased as the amount of the solvent increased in the clathrated sPS membrane. Wide‐angle X‐ray diffraction results showed that 2θ at 8.25° was slightly shifted toward 8°, and there was no change in the peak position at 10° for p‐CT (A‐M), which was immersed in different solvents (1 mol %); however, the intensity of 2θ at 10° was not similar for all the samples. Among the solvents used for the sorption studies at 1 mol %, p‐CT (A‐M) could sorb more p‐CT and CB than p‐X, toluene, and chloroform. The solvent sorption isotherm was the Langmuir sorption mechanism. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3439–3446, 2004     

Structure and properties of the mesophase of syndiotactic polystyrene—III. Selective sorption of the mesophase of syndiotactic polystyrene

Syndiotactic polystyrene (sPS) has various crystalline forms such as α, β, γ, and δ forms, and a mesophase depending on the preparation method. In this study, we focused on the mesophase with the molecular cavity of sPS, which is obtained by step‐wise extraction of the guest molecules from the sPS δ form. To prepare the mesophase containing different shapes and sizes of the cavity, two kinds of the sPS δ form membrane cast from either toluene or chloroform solution were first prepared and then the guest molecules were removed by a step‐wise extraction method using acetone and methanol. We could succeed in the preparation of two kinds of mesophase with different shapes and sizes of the molecular cavity. Either toluene or chloroform vapor sorption to the sPS mesophase membranes was examined at 25 °C. Sorption analysis indicates that the mesophase with large molecular cavities can mainly sorb large molecules; on the other hand, the mesophase with small cavities can sorb only the small molecules, and is unable to sorb a large amount of large molecule because the cavity was too small to sorb the large molecules. Therefore, the sPS mesophase membrane has sorption selectivity based on the size of the molecular cavity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 238–245, 2004     

Structure and properties of the mesophase of syndiotactic polystyrene. II. Effect of stepwise extraction on the preparation of the mesophase

In this study, a novel stepwise extraction method has been examined. The guest molecules housed between the helices of the clathrate δ form of syndiotactic polystyrene can be removed completely with this method. A systematic study of the preparation of a solvent‐free mesophase (emptied clathrate) membrane, its helical and residual solvent contents, and its structural transformations has been performed. In this first attempt, an enhancement in the TTGG helical content has been observed in the extracted membrane, and a conceptual mechanism is proposed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 269–273, 2003     

Structure and properties of the mesophase of syndiotactic polystyrene. I. Effect of casting conditions on the preparation of the mesophase

A syndiotactic polystyrene–toluene solution was cast under two different casting conditions to obtain the δ form. A systematic study of its conformational transition, thermal behavior, and structural transformation as functions of the annealing temperature and time was performed. Spectroscopic studies revealed the content of its helical conformations and its retention up to 190 °C. Thermal analyses showed a significant difference in the transformation from the γ form to the α form. The retention of the intermediate emptied clathrate form (mesophase) of the conformational order for a longer duration (from 120 to 180 °C) in a syndiotactic polystyrene membrane cast at room temperature was confirmed by X‐ray diffraction analysis. On the basis of the experimental results in this work, the transition mechanism is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 530–536, 2002; DOI 10.1002/polb.10120     

Effects of the oriented mesophase on the cold crystallization of syndiotactic polystyrene and its blend with poly(2,6‐dimethyl‐1,4‐phenylene oxide)

The effects of molecular orientation on the crystallization and polymorphic behaviors of syndiotactic polystyrene (sPS) and sPS/poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) blends were studied with wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry. The oriented amorphous films of sPS and sPS/PPO blends were crystallized under constraint at crystallization temperatures ranging from 140 to 240°C. The degree of crystallinity was lower in the cold‐crystallized oriented film than in the cold‐crystallized isotropic film. This was in contrast to the case of the cold crystallization of other polymers such as poly(ethylene terephthalate) and isotactic polystyrene, in which the molecular orientation induced crystallization and accelerated crystal growth. It was thought that the oriented mesophase was obtained in drawn films of sPS and that the crystallization of sPS was suppressed in that phase. The WAXD measurements showed that the crystal phase was more ordered in an sPS/PPO blend than in pure sPS under the same annealing conditions. The crystalline order recovered in the cold‐crystallized sPS/PPO blends in comparison with the cold‐crystallized pure sPS because of the decrease in the mesophase content. The crystal forms depended on the crystallization temperature, blend composition, and molecular orientation. Only the α′‐crystalline form was obtained in cold‐crystallized pure sPS, regardless of molecular orientation, whereas α′, α″, and β′ forms coexisted in the cold‐crystallized sPS/PPO blends prepared at higher crystallization temperatures (200–240°C). The β′‐form content was much lower in the oriented sPS/PPO blend than in the isotropic blend sample at the same temperature and composition. It was concluded that the oriented mesophase suppressed the crystallization of the stable β′ form more than that of the metastable α′ and α″ forms during the cold crystallization of sPS/PPO blends. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1665–1675, 2003     

A Novel Synthesis of γ,δ‐Unsaturated Aldehydes from α‐Formyl‐γ‐lactones

A preparatively useful one‐step transformation of γ,γ‐disubstituted α‐formyl‐γ‐lactones into trisubstituted γ,δ‐unsaturated aldehydes is described, by means of catalytic amounts of either AcOH or AcOEt in the vapor phase over a glass support. A mechanistic rationale is proposed.     

Lamellar morphology and equilibrium melting temperature of syndiotactic polystyrene in β‐crystalline form

Lamellar morphology and thickness of syndiotactic polystyrene (sPS) samples melt‐crystallized at various temperatures were probed using transmission electron microscopy (TEM) and small‐angle X‐ray scattering (SAXS). In addition, the melting temperature and enthalpy of the crystallized samples were characterized with differential scanning calorimetry. Under appropriate thermal treatments, all the samples investigated in this study were crystallized into β′ crystal modification, as revealed by wide‐angle X‐ray diffraction. From the SAXS intensity profiles, a scattering peak (or shoulder) associated with lamellar features as well as the presence of anomalous scattering at the zero‐scattering vector were evidently observed. The peculiar zero‐angle scattering was successfully described by the Debye–Bueche model, and subtraction of its contribution from the raw intensity profiles was carried out to deduce the intensity profile merely associated with the lamellar feature. The lamellar thickness obtained from Lorentz‐corrected intensity profiles in this manner agrees with that measured from the TEM images, provided that the two‐phase model is applied. On the basis of the Gibbs–Thomson equation, the modest estimations of equilibrium melting temperature and the surface free energy of the fold lamellar surface are 292.7 ± 2.7 °C and 20.2 ± 2.6 erg/cm², respectively, when lamellar thicknesses measured by TEM are applied. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1626–1636, 2002     

POSS end‐linked peptide‐functionalized poly(ɛ‐caprolactone)s and their inclusion complexes with α‐cyclodextrin

In this report, we have synthesized organic/inorganic hybrid peptide–poly(?‐caprolactone) (PCL) conjugates via ring opening polymerization (ROP) of ?‐caprolactone (CL) in the presence of two sequence defined peptide initiators, namely POSS‐Leu‐Aib‐Leu‐NH₂ (POSS: polyhedral oligomeric silsesquioxane; Leu: Leucine; Aib: α‐aminoisobutyric acid) and OMe‐Leu‐Aib‐Leu‐NH₂. Covalent attachment of peptide segments with the PCLs were examined by ¹H and ²⁹Si NMR spectroscopy, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) and FTIR spectroscopy. Supramolecular inclusion complexations of synthesized peptide‐PCL conjugates with α‐cyclodextrin (α‐CyD) were studied to understand the effect of POSS/OMe‐peptide moieties at the PCL chain ends. Inclusion complexation of peptide‐PCL conjugates with α‐CyD produced linear polypseudorotaxane, confirmed by ¹H NMR, FTIR, powder X‐ray diffraction (PXRD), polarized optical microscopy (POM) and differential scanning calorimetry (DSC). Extent of α‐CyD threading onto the hybrid peptide‐PCL conjugated polymers is less than that of α‐CyD threaded onto the linear PCL. Thus, PCL chains were not fully covered by the host α‐CyD molecules due to the bulky POSS/OMe‐peptide moieties connected with the one edge of the PCL chains. PXRD experiment reveals channel like structures by the synthesized inclusion complexes (ICs). Spherulitic morphologies of POSS/OMe‐peptide‐PCL conjugates were fully destroyed after inclusion complexation with α‐CyD and tiny nanoobjects were produced. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3643–3651.     

Synthesis and Structure of Low‐valent η4‐Cinnamaldehyde Cobalt Complexes

Three η⁴‐(C=C–C=O) coordination cobalt(I) complexes 1 – 3 were synthesized by the reactions of cinnamaldehyde, p‐fluorocinnamaldehyde, and p‐chlorocinnamaldehyde with CoMe(PMe₃)₄. Complex 4 as η²‐(C=C) coordination was prepared by the reaction of chalcone with Co(PMe₃)₄. The structures of complexes 1 – 4 were confirmed by single‐crystal X‐ray diffraction. Although the reactions didn't undergo C–H bond activation and decarbonylation, the formation of complexes 1 – 4 deepens our understanding of the reactions between α,β‐unsaturated aldehyde or ketone with low‐valent central cobalt atom.     

Three different β‐cyclodextrins direct the emulsion copolymerization of a highly fluorinated methacrylate toward distinctive nanostructured particle morphologies

Stable colloidal dispersions of nanostructured semifluorinated acrylic particles with an unfluorinated core and an outer layer consisting of copolymers of the highly hydrophobic and lipophobic heptadecafluorodecyl methacrylate (FMA) were successfully synthesized with the assistance of three different cyclodextrins as phase‐transfer catalysts: β‐cyclodextrin (β‐CD), hydroxypropyl β‐cyclodextrin (HpCD), and methyl β‐cyclodextrin (MeCD). While all the cyclodextrins form a stable inclusion complex (IC) with FMA, only the ICs with the more hydrophilic HpCD and MeCD are soluble in water. Nevertheless, incorporation of FMA in the particle shell copolymer could be achieved also when using β‐CD. On the other hand, the morphology of the nanostructured particles was characterized by a “patchy” fluorinated shell dependent on the cyclodextrin used, the best results being obtained with MeCD. A monomer‐starved semicontinuous emulsion polymerization procedure was essential to favor the CD‐mediated incorporation of FMA into the copolymer structure and to achieve a stable colloidal dispersion even in the presence of small amounts of mixed anionic–nonionic surfactants. The thermal and surface properties of the latex films showed a good correlation with the shell composition and patchy nanostructured morphology of the particles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The Contrasting Recognition Behavior of β‐Cyclodextrin and Its Sulfobutylether Derivative towards 4′,6‐Diamidino‐2‐phenylindole

The noncovalent interactions between 4′, 6‐diamidino‐2‐phenylindole (DAPI) and sulfobutylether β‐cyclodextrin (SBE₇β‐CD) are evaluated by using photochemical measurements and compared with that of native β‐CD. Contrasting recognition behavior and intriguing modulations in the photochemical behavior of DAPI were observed. In particular, a large enhancement in the fluorescence emission and excited‐state lifetime were seen upon binding to SBE₇β‐CD, with the SBE₇β‐CD inclusion complex being approximately 1000 times stronger than that of β‐CD. The ensuing fluorescence “turn on” was demonstrated to be responsive to chemical stimuli, such as metal ions and adamantylanmine (AD). Upon addition of Ca²⁺/AD, nearly quantitative dissociation of the complex was established to regenerate the free dye and result in fluorescence “turn off”. The SO₃^? groups are believed to be critical for the strong and selective binding of the chromophore and the stimuli‐responsive tuning. This is as an important design criterion for the optimization of host–guest properties through supramolecular association, which is relevant for drug‐delivery applications.     

Asymmetric Disulfonimide‐Catalyzed Synthesis of δ‐Amino‐β‐Ketoester Derivatives by Vinylogous Mukaiyama–Mannich Reactions

An organocatalytic asymmetric synthesis of δ‐amino‐β‐ketoester derivatives has been developed. A chiral disulfonimide (DSI) serves as a highly efficient precatalyst for a vinylogous Mukaiyama–Mannich reaction of readily available dioxinone‐derived silyloxydienes with N‐Boc‐protected imines, delivering products in excellent yields and enantioselectivities. The synthetic utility of this reaction is illustrated in various transformations, including a new C? C bond‐forming reaction, which provide useful enantioenriched building blocks. The methodology is applied in a formal synthesis of (?)‐lasubin.     

Preparation of inclusion complex between polyaniline and β‐cyclodextrin in aqueous solution

Two routes have been developed inorder to prepare an inclusion complex of polyaniline (PANI) and β‐cyclodextrin (βCyD). The first route was to in situ polymerize N‐phenyl‐1,4‐phenylenediamine (PPD) which was encapsulated in βCyD in advance. The formation of an inclusion complex was confirmed by UV‐vis, circular dichroism (CD), and NMR spectra. It was found that the synthesized complex was readily dissolved in a range of solvents due to the solubility of βCyD. In these solvents, PANI was well encapsulated by βCyD with some conformation change in the chain of PANI, which was proved by the CD spectra of PANI. The second route involved preparing the inclusion complex by post‐encapsulation of PANI emeraldine base (EB) into βCyD in aqueous solution at room temperature. The encapsulation of EB into βCyD was confirmed by FT‐IR and UV‐vis spectra. The band shift in UV‐vis spectra indicated that the inclusion complexation was a gradual process, and the change in the chain conformation of PANI was also observed after it was encapsulated into βCyD. Copyright © 2003 John Wiley & Sons, Ltd.     

Sulfonated syndiotactic polystyrene: sorption of ionic liquid in the amorphous phase and of organic guests in the crystalline phase

Fourier Transform Infrared spectroscopy (FTIR) and Wide‐Angle X‐Ray Diffraction (WAXD) measurements have clearly established the occurrence of a dual sorption ability of sulfonated syndiotactic polystyrene samples, which exhibit the nanoporous δ crystalline phase. In fact, large uptake (up to 20–30 wt%) of ionic liquid (IL; e.g. 1‐ethyl‐3‐methylimidazolium dicyanamide) occurs only in the hydrophilic amorphous sulfonated phases and does not disturb the hydrophobic nanoporous crystalline δ phase. On the other hand, a large uptake of organic guests (e.g. naphthalene) occurs prevailingly in the nanoporous hydrophobic crystalline phase, independently of the presence of the IL in the amorphous phase, eventually leading to the formation of syndiotactic polystyrene co‐crystalline phases. The thermal stability of IL can be largely increased by their inclusion in the amorphous phase of sulfonated syndiotactic polystyrene films. Copyright © 2012 John Wiley & Sons, Ltd.     

Enantioselective Syntheses of Substituted γ‐Butyrolactones

The previously described chiral 2‐acyloxathianes 5 (Scheme I) are used in two different enantioselective syntheses of γ‐butyrolactones. In one synthesis, Grignard addition, cleavage and reduction to carbinols RR'C(OH)CH₂OH is followed by tosylation, malonate homologation, lactonization, and removal of the carbomethoxy group to give optically active γ‐lactones. A modification of this synthesis (Scheme I) leads to optically active α‐methylene‐γ‐lactones. In the second synthesis, reaction of a bromomagnesium enolate with ketones 5 leads to β‐hydroxyesters, which, by appropriate sequences of reduction and cleavage (Scheme II) are converted to optically active α‐ or β‐hydroxy‐γ‐lactones.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Self‐assembling amphiphilic block copolymer from renewable δ‐decalactone and δ‐dodecalactone

Aliphatic polyesters have many applications in the biomedical field due to their properties and facile degradation. They are commonly synthesized via ring opening polymerization (ROP) with metal‐based catalysts, but as high temperatures are needed and the products contain metal, organocatalysts are now widely adopted to polymerize them at room temperature while also ensuring short reaction times. Here, 1,7,7‐triazabicyclo[4.4.0]‐dec‐5‐ene is used to polymerize less reactive but renewably‐derived lactones, namely δ‐decalactone and δ‐dodecalactone. These monomers were chosen in the attempt of creating renewable and highly lipophilic materials for drug delivery applications as alternatives to the more traditional, but non‐renewable δ‐valerolactone and ?‐caprolactone. A combination of ROP and living radical polymerization Reversible Addition‐Fragmentation Chain Transfer is proposed here to synthesize grafted block copolymers. They are able to self‐assemble in water, forming micelles where the lipophilic polyester core is able to entrap a lipophilic drug, thus making the system a good candidate for drug delivery. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3788–3797