A flame‐retardant phosphate and cyclotriphosphazene‐containing epoxy resin: Synthesis and properties

A novel flame‐retardant epoxy resin, (4‐diethoxyphosphoryloxyphenoxy)(4‐glycidoxyphenoxy)cyclotriphosphazene (PPCTP), was prepared by the reaction of epichlorohydrin with (4‐diethoxyphosphoryloxyphenoxy)(4‐hydroxyphenoxy)cyclotriphosphazene and was characterized by Fourier transform infrared, ³¹P NMR, and ¹H NMR analyses. The epoxy resin was further cured with diamine curing agents, 4,4′‐diaminodiphenylmethane (DDM), 4,4′‐diaminodiphenylsulfone (DDS), dicyanodiamide (DICY), and 3,4′‐oxydianiline (ODA), to obtain the corresponding epoxy polymers. The curing reactions of the PPCTP resin with the diamines were studied by differential scanning calorimetry. The reactivities of the four curing agents toward PPCTP were in the following order: DDM > ODA > DICY > DDS. In addition, the thermal properties of the cured epoxy polymers were studied by thermogravimetric analysis, and the flame retardancies were estimated by measurement of the limiting oxygen index (LOI). Compared to a corresponding Epon 828‐based epoxy polymer, the PPCTP‐based epoxy polymers showed lower weight‐loss temperatures, higher char yields, and higher LOI values, indicating that the epoxy resin prepared could be useful as a flame retardant. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 972–981, 2000     

Synthesis,characterization, and properties of new thermally curable polyetheresters containing benzoxazine moieties in the main chain

High molecular weight polyetheresters (PEE) containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diol functional monomer is synthesized through the Mannich reaction of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and 2‐(2‐aminoethoxy)ethanol. Polycondensation of the resulting benzoxazine dietherdiol with adipoyl chloride and terephthaloyl dichloride in the presence of triethyl amine yields the corresponding PEE with the molecular weights of 34.000 Da. The structures of the precursor diol monomer and the resulting PEEs are confirmed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy (¹H‐NMR) analysis. Curing behavior of both the monomer and polymers has also been studied by differential scanning calorimetry (DSC). Flexible free standing transparent films of the PEEs are obtained by solvent casting from dichloromethane solution on Teflon plates. The films preserve shape and, to some extent, toughness after thermal curing between 140 and 220 °C. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis (TGA). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 414–420, 2008     

Hyperbranched polycarbosiloxane with dendritic boron cores: Synthesis,characterization, and structure regulation

The synthesis, characterization, and structure regulation of hyperbranched polycarbosiloxane with dendritic boron cores were realized in this paper. First, dendritic boron core was synthesized via hydroboration with borane dimethylsulfide and bis(allyloxy)dimethylsilane. Then, the hyperbranched polycarbosiloxanes with dendritic boron cores were synthesized via hydrosilylation with AB₂ type monomer of bis(allyloxy)methylsilane and dendritic boron cores. The molecular structures of the dendritic boron core and resulting hyperbranched polymers were characterized by using Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance, and ¹³C nuclear magnetic resonance spectroscopies. Size exclusion chromatography/multiangle laser light scattering analysis reveals that the structures of hyperbranched polycarbosiloxane can be regulated effectively by incorporation of functional dendritic boron cores. Compared with hyperbranched polycarbosiloxane of the same molecular weight level, the hyperbranched polycarbosiloxane with dendritic boron cores presents narrower molecular weight distribution as well as much smaller hydrodynamic radius and intrinsic viscosity. Thermalgravimetric analyzer analysis indicates that both the decomposition temperature and ceramic yields are increased as the results of the incorporation of dendritic boron cores into hyperbranched polycarbosiloxane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3930–3941, 2006     

Flame‐retardant epoxy resins from o‐cresol novolac epoxy cured with a phosphorus‐containing aralkyl novolac

A novel phosphorus‐containing aralkyl novolac (Ar‐DOPO‐N) was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) first with terephthaldicarboxaldehyde and subsequently with phenol. The chemical structures of the synthesized compounds were characterized with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. Ar‐DOPO‐N blended with phenol formaldehyde novolac was used as a curing agent for o‐cresol formaldehyde novolac epoxy, resulting in cured epoxy resins with various phosphorus contents. The epoxy resins exhibited high glass‐transition temperatures (159–177 °C), good thermal stability (>320 °C), and retardation on thermal degradation rates. High char yields and high limited oxygen indices (26–32.5) were observed, indicating the resins' good flame retardance. Using a melamine‐modified phenol formaldehyde novolac to replace phenol formaldehyde novolac in the curing composition further enhanced the cured epoxy resins' glass‐transition temperatures (160–186 °C) and limited oxygen index values (28–33.5). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2329–2339, 2002     

Synthesis of a novel bis‐spiroorthoester containing 9,10‐dihydro‐9‐oxa‐10‐phosphaphenantrene‐10‐oxide as a substituent: Homopolymerization and copolymerization with diglycidyl ether of bisphenol A

A new bis‐spiroorthoester‐containing monomer, bis[(1,4,6‐trioxaspiro‐[4.4]‐nonan‐2‐yl)‐methyl] 2‐[10‐(9,10‐dihydro‐9‐oxa‐10‐phosphaphenantrene‐10‐oxide‐10‐yl)] maleate (SOE‐DOPOMA), was synthesized with good yields by an esterification reaction with a hydroxylated spiroorthoester (2‐hydroxymethyl‐1,4,6‐trioxaspiro‐[4.4]‐nonane) and a phosphorus‐containing diacid {2‐[10‐(9,10‐dihydro‐9‐oxa‐10‐phosphaphenantrene‐10‐ oxide‐10‐yl)] maleic acid}, both of which were previously synthesized. SOE‐DOPOMA was characterized with ¹H, ¹³C, and ³¹P NMR spectroscopy. This new spiroorthoester was crosslinked with ytterbium triflate as a cationic initiator. A mixture of SOE‐DOPOMA and diglycidyl ether of bisphenol A was also crosslinked under the same conditions. The curing was studied with differential scanning calorimetry and monitored with Fourier transform infrared spectroscopy. The materials were characterized with differential scanning calorimetry, thermogravimetric analysis, and thermodynamomechanical analysis. The shrinkage effect on cationic crosslinking was assessed with gas pycnometry, and the flame‐retardant properties were determined with limiting oxygen index measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1980–1992, 2007.     

Polysiloxane‐containing benzoxazine moieties in the main chain

Polysiloxanes containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diallyl functional benzoxazine monomer is synthesized through the Mannich and respective ring closing reactions of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and allyamine. Subsequent hydrosilylation reaction of the resulting allylic monomer (B‐ala) with 1,1,3,3‐tetramethyldisiloxane (TMDS) in the presence of Pt catalyst yields the corresponding oligo(B‐ala‐tetramethyldisiloxane)s (OBTMDS). Using the anionic polymerization route, OBTMDS was then converted to poly(bisbenzoxazinedimethylsiloxane)s (PBDMSs) by reacting with readily available cyclic oligomer octamethylcyclotetrasiloxane (D4) or decamethylcyclopentasiloxane (D5) in the presence of tetrabutylammonium hydroxide as catalyst. The structures of the precursor diallyl monomer, the intermediate oligomer, and the resulting polymers are confirmed by Fourier transform infrared and ¹H NMR analysis. Curing behavior of the products at various stages has also been studied by differential scanning calorimetry. Flexible transparent films of the PBDMSs are obtained by solvent casting. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of photosensitive liquid crystalline poly(benzylidene‐ether)s with alkanones and methylene spacers in the main chain

Photosensitive main chain liquid crystalline poly (benzylidene‐ether)s were synthesized by Claisen‐Schmidt polycondensation reaction of 4,4′‐Diformyl‐α,ω‐diphenoxyalkanes with acetone, cyclopentanone and cyclohexanone. The diformyl precursors were synthesized from 4‐hydroxybenzaldehyde and dibromoalkanes of varying spacer lengths. The structure of the monomers and polymers was confirmed by ELEM ANAL , Fourier transform infrared, ¹H NMR and ¹³C NMR spectral analyses. Molecular weight of the polymers was determined by gel permeation chromatography and was found to be moderate. The thermogravimetric analysis data revealed that the polymers were stable up to 280 °C and start degrading thereafter. Cyclopentanone containing polymers are more stable than acetone and cyclohexanone containing polymers. The self‐extinguishing properties of the synthesized polymers were studied by the determination of the limiting oxygen index values with Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated with differential scanning calorimetry and proved that the isotropic temperature decreases as the spacer length increases. Polarized optical microscopic study showed that cyclohexanone containing polymer IIIb exhibit nematic schlieren texture. Crystallinity of the polymers was studied with X‐ray diffractograms. The photolysis of liquid crystalline poly(benzylidene‐ether)s revealed that the entgegen, zusammen (EZ) photoisomerization proceeds in the system. Fluorescence spectra showed violet and green emission maxima. The band gap energy is calculated from absorption spectra are in the range of 3.17–3.40 eV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

In situ synthesis of a novel transparent poly (methyl methacrylate) resin with markedly enhanced flame retardancy

A novel phosphorus‐containing monomer, (6‐oxido‐6H‐dibenzo[c,e][1,2]oxaphosphinin‐6‐yl)methyl acrylate (DOPO‐AA), is first synthesized and characterized by Fourier transform infrared spectra (FTIR), ¹H nuclear magnetic resonance (NMR) and ³¹P NMR. The monomer is then introduced into poly (methyl methacrylate) (PMMA) matrix via in situ copolymerization to produce a new PMMA based copolymer (PMMA/DOPO‐AA). From UV–vis spectra, microscale combustion calorimeter (MCC) and thermogravimetric analyses (TGA) results, the as‐fabricated PMMA/DOPO‐AA copolymers not only keep relatively high transparency, but also exhibit remarkable improvements in the flame retardancy and thermal stability, such as increased T_0.5 by 60.2°C and limited oxygen index (LOI) by 4.1, and decreased peak heat released rate (PHRR) by 34.7%. Thermal degradation behaviors investigated by real time Fourier transform infrared spectra (RTIR), char structure analysis studied by scanning electron microscope (SEM) and pyrolysis gaseous products studied by TGA coupled with FTIR (TGA‐FTIR) demonstrate that the catalytic charring function of DOPO‐AA in condensed phase and DOPO flame retardant systems in the gas phase are two key factors for the property enhancements. This work not only provides a promising flame‐retardant monomer for polymers, but also will stimulate more efforts on the development of DOPO‐containing flame‐retardant monomers. Copyright © 2015 John Wiley & Sons, Ltd.     

Phosphorus‐containing telechelic polyester‐based ionomer: Facile synthesis and antidripping effects

The ionomer concept was introduced to the field of flame‐retardant polyesters for the first time. The ionic monomer, sodium salt of 2‐hydroxyethyl 3‐(phenylphosphinyl)propionate (SHPPP), was synthesized by selective esterification of 3‐(hydroxyphenylphosphinyl)propionic acid with ethylene glycol, followed by neutralization with sodium carbonate anhydrous. SHPPP was characterized with ¹H, ¹³C, and ³¹P NMR spectroscopy, Fourier transform infrared spectroscopy, and X‐Ray photoelectron spectroscopy. Poly(ethylene terephthalate)‐based ionomers containing terminal units derived from this ionic monomer, were synthesized by melt polycondensation. The chemical structure of the ionomers was characterized with ¹H, ¹³C, and ³¹P NMR spectroscopy. The effects of SHPPP on the thermal properties and melting behaviors of the ionomers were investigated by thermogravimetric analysis and differential scanning calorimetry. The flammability of the ionomers was characterized by the limiting oxygen index test. The test results show that the ionomers themselves possess both excellent flame retardancy and antidripping properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2994–3006, 2008     

Investigation on dual properties of photosensitive thermotropic liquid‐crystalline poly(benzylidene‐ether)s containing alkanones and methylene spacers in the main chain

Thermotropic main chain liquid‐crystalline poly (benzylidene‐ether)s were synthesized by Claisen‐Schmidt polycondensation reaction of 4,4′‐diformyl‐2,2′‐dimethoxy‐α,ω‐diphenoxyalkanes with acetone, cyclopentanone, and cyclohexanone. The diformyl precursors were synthesized from 4‐hydroxy‐3‐methoxybenzaldehyde with dibromoalkanes of varying spacer lengths. The structure of monomers and polymers was confirmed by elemental analyses, Fourier‐transform infrared, ¹H NMR, and ¹³C NMR spectral analyses. The thermal properties were studied by thermogravimetric analysis and differential scanning calorimetry. Thermogravimetric analysis (TGA) data revealed that the polymers were stable up to 285 °C and start degrading thereafter. Cyclopentanone‐containing polymers are more stable than cyclohexanone‐ and acetone‐containing polymers. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index values using Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using differential scanning calorimetry (DSC), and it was proved that the isotropic temperature decreases with an increase in the length of the spacer. Polarized optical microscopic study showed that cyclohexanone‐containing polymers exhibit nematic threadlike and nematic droplet texture. The photolysis of liquid‐crystal poly(benzylidene‐ether)s revealed that the Entgegen, Zusammen (EZ) photoisomerization proceeds in the system. The band gap energy was calculated from absorption spectra and is in the range of 3.05–3.37 eV and proved that the length of spacers has a significant influence on their absorption and emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Substituent effect on azobenzene‐based liquid‐crystalline organophosphorus polymers

An Erratum has been published for this article in Journal of Polymer Science Part A: Polymer Chemistry (2003) 41(23) 3862 A new series of combined‐type, azobenzene‐based organophosphorus liquid‐crystalline polymers were synthesized, and their photoisomerization properties were studied. The prepared polymers contained azobenzene units as both the main‐chain and side‐chain mesogens. Various groups were substituted in the terminal of the side‐chain azobenzene mesogen, and the effects of the substituents were investigated. All the polymers were prepared at the ambient temperature by solution polycondensation with various 4‐substituted phenylazo‐4′‐phenyloxyhexylphosphorodichloridates and 4,4′‐bis(6‐hydroxyhexyloxy) azobenzene. The polymers were characterized with gel permeation chromatography, Fourier transform infrared, and ¹H, ¹³C, and ³¹P NMR spectroscopy. Thermogravimetric analysis revealed that all the polymers had high char yields. The liquid‐crystalline behavior of the polymers was examined with hot‐stage optical polarizing microscopy, and all the polymers showed liquid‐crystalline properties. The formation of a mesophase was confirmed by differential scanning calorimetry (DSC). The DSC data suggested that mesophase stability was better for electron‐withdrawing substituents than for halogens and unsubstituted ones. Ultraviolet irradiation studies indicated that the time taken for the completion of photoisomerization depended on the dipolar moment, size, and donor–acceptor characteristics of the terminal substituents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3188–3196, 2003     

Novel synthesis of polyethylene–poly(dimethylsiloxane) copolymers with a metallocene catalyst

Polyethylene–poly(dimethylsiloxane) copolymers were synthesized in solution from an ethylene monomer and an ω‐vinyl poly(dimethylsiloxane) (PDMS) macromonomer at 363 and 383 K with EtInd₂ZrCl₂/methylaluminoxane as a catalyst. The copolymers obtained were characterized with Fourier transform infrared spectroscopy, ¹H and ¹³C NMR, size exclusion chromatography, and differential scanning calorimetry. The rheological properties of the molten polymers were determined under dynamic shear flow tests at small‐amplitude oscillations, whereas the physical arrangement of the phase domains was analyzed with scanning electron microscopy (SEM)/energy dispersive X‐ray (EDX). The analysis of the catalyst activity and the resulting polymers supported the idea of PDMS blocks or chains grafted to polyethylene. The changes in the rheological behavior and the changes in the Fourier transform infrared and NMR spectra were in agreement with this proposal. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2462–2473, 2004     

Phosphorylated copolymers containing pendant,crosslinkable spiro orthoester moieties

The synthesis of a novel spiro orthoester containing monomer, 1,4,6‐trioxaspiro[4.4]‐2‐nonylmethyl acrylate, is presented. This monomer was polymerized via a free‐radical system to yield the homopolymer and a series of copolymers with phosphorus‐containing comonomers. Diethyl vinyl phosphonate, allyldiphenylphosphine oxide, and diethyl(methacryoyoxymethyl)phosphonate were used in various feed ratios to produce copolymers with different phosphorous concentrations containing crosslinkable spiro orthoester side‐chain units. The crosslinking of the polymers was performed cationically with ytterbium triflate, and in all cases, the expansion of the polymer was observed. Moreover, the incorporation of phosphorus into the copolymers increased the limiting oxygen indices, regardless of the percentage of phosphorus used. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6728–6737, 2006     

Effect of boron containing materials on flammability and thermal degradation of polyamide‐6 composites containing melamine cyanurate

Three different boron containing materials, zinc borate (ZnB), borophosphate (BPO₄), and boron and silicon containing oligomer (BSi), were used to improve the flame retardancy of melamine cyanurate (MC) in a polyamide‐6 (PA‐6) matrix. The combustion and thermal degradation characteristics were investigated using limiting oxygen index (LOI), UL‐94 standard, thermogravimetric analysis‐Fourier transform infrared spectroscopy (TGA‐FTIR), differential scanning calorimeter (DSC), and scanning electron microscopy (SEM). All the three boron compounds showed no synergistic effect with MC, and only BPO₄ at high loadings showed comparable LOI values by increasing the dripping rate. For ZnB and BSi glassy film and char formation decreases the dripping rate and sublimation of melamine and give rise to low LOI. According to TGA‐FTIR results, addition of boron compounds does not alter the gaseous product distribution of both MC and PA‐6. The addition of boron compounds affects flame retardancy through physical means. It was noted from the TGA data that boron compounds reduced the decomposition temperature of both MC and PA‐6, also affecting the flame retardancy negatively by premature degradation of MC at low temperatures. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of soluble,fluorescent polyesters and polyethers with substituted m‐terphenyl segments in the main chain

A new series of rigid polyesters and semiflexible polyethers were synthesized from 4,4″‐dihydroxy‐5′‐phenyl or anthracenyl‐m‐terphenyl. The polymers were characterized by viscometry, Fourier transform infrared, NMR, X‐ray, differential scanning calorimetry, thermomechanical analysis, thermogravimetric analysis, ultraviolet–visible, and luminescence spectroscopy. The polyesters were amorphous, whereas some of the polyethers showed a low degree of crystallinity. All the polymers displayed an enhanced solubility even in 1,1,2,2‐tetrachloroethane and tetrahydrofuran. The glass‐transition temperatures were 123–146 °C for the polyesters and 45–117 °C for the polyethers. The polymers were stable up to 213–340 °C and afforded anaerobic char yields of 36–62% at 800 °C. Their optical properties were investigated both in solution and in the solid state. They showed ultraviolet fluorescence, violet‐blue fluorescence, or both with emission maxima at 333–487 nm. The polymers with anthracenyl pendent groups exhibited higher fluorescence quantum yields and emission maxima redshifted compared with the corresponding polymers with phenyl pendent groups. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2381–2391, 2000     

Synthesis and characterization of ultraviolet‐curable hyperbranched poly(siloxysilane)s

Two UV‐curable hyperbranched poly(siloxysilane)s ( I and III ) containing vinyl and allyl end groups were synthesized via polyhydrosilylation with methylbis(methylethylvinylsiloxy)silane and methylbis(dimethylallylsiloxy)silane monomers. A cationic UV‐curable hyperbranched polymer ( II‐Ep ) with epoxy end groups was prepared via the hydrosilylation of hyperbranched polymer II with Si? H terminated groups and glycidyl methacrylate, and II was also obtained via the polyhydrosilylation of AB₂‐type monomer methylvinylbis(methylethylsiloxy)silane. All hydrosilylation reactions were catalyzed by Pt/C or chloroplatinic acid. Three AB₂‐type monomers were synthesized via the hydrolysis of functional chlorosilane, which was prepared with Grignard reagents and dichlorosilane. The molecular structures of the polymers were characterized with ¹H NMR, Fourier transform infrared, and gel permeation chromatography, and the UV‐curing behaviors of the polymers under different atmospheres and with different photoaccelerators were also investigated. The thermostability of uncured and cured polymers was examined with thermogravimetric analysis, and the data indicated that the orders of the onset decomposition temperatures for the cured polymers and the residue weights were as follows: III (380 °C) > I (320 °C) > II‐Ep (280 °C) and I (70.4%) > III (64.1%) > II‐Ep (60.9%), respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1883–1894, 2005     

Durable and refreshable polymeric N‐halamine biocides containing 3‐(4′‐vinylbenzyl)‐5,5‐dimethylhydantoin

A novel vinyl‐hydantoin monomer, 3‐(4′‐vinylbenzyl)‐5,5‐dimethylhydantoin, was synthesized in a good yield and was fully characterized with Fourier transform infrared (FTIR) and ¹H NMR spectra. Its homopolymer and copolymers with several common acrylic and vinyl monomers, such as vinyl acetate, acrylonitrile, and methyl methacrylate, were readily prepared under mild conditions. The polymers were characterized with FTIR and ¹H NMR, and their thermal properties were analyzed with differential scanning calorimetry studies. The halogenated products of the corresponding copolymers exhibited potent antibacterial properties against Escherichia coli, and the antibacterial properties were durable and regenerable. The structure–property relationships of the polymers were further discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3348–3355, 2001     

FTIR, 13C NMR,and GPC analysis of high‐propylene content co‐ and terpolymers with ethylene and higher α‐olefins synthesized with EtInd2ZrCl2/MAO

This article reports the results of propylene/α‐olefin copolymerization and propylene/ethylene/α‐olefin terpolymerization using low concentrations (less than 5 mol %) of long α‐olefins such as 1‐octene, 1‐decene, and 1‐dodecene. Kinetics data are presented and discussed. The highest activity was found with the longest α‐olefin studied (1‐dodecene). A possible explanation is proposed for this and other characteristics of the polymers obtained. The effect of low‐ethylene contents (4 mol % in the gas phase) on the copolymerization of propylene/α‐olefins was also examined. The polymers synthesized were characterized by ¹³C NMR, gel permeation chromatography, DSC, Fourier transform infrared spectroscopy, and wide‐angle X‐ray scattering. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2005–2018, 2001     

Synthesis,structure, and characterization of nematic liquid‐crystalline thermosets based on bisacrylates

Four bisacrylate mesogenic monomers and the corresponding liquid‐crystalline thermosets were synthesized. The chemical structures of the intermediate compounds and monomers obtained were confirmed by elemental analyses, Fourier transform infrared, and ¹H NMR and ¹³C NMR spectra. The mesomorphic properties and thermal stability were investigated with differential scanning calorimetry, thermogravimetric analysis, polarized optical microscopy, and X‐ray diffraction measurements. The influence of the curing temperatures and time on the phase behavior and thermal stability of the thermosets was discussed. All the monomers and thermosets exhibited a nematic schlieren texture. However, the monomers only showed the melting transition, and the thermosets displayed the glass transition. The experimental results demonstrated that the monomer structures strongly affected the phase behavior and the curing reaction rate, and the glass‐transition temperatures and thermal stability of the thermosets increased with the curing temperature and time. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4478–4485, 2005     

Photoactive,liquid‐crystalline,hyperbranched benzylidene polyesters: Synthesis and characterization

A novel photoactive, liquid‐crystalline, hyperbranched benzylidene polyester (PAHBP) was synthesized from a dilute solution of an A₂ photoactive monomer [bis(4‐hydroxybenzylidene)‐4‐phenyl cyclohexanone] and a B₃ monomer (1,3,5‐benzene tricarboxylic acid chloride) by the solution polycondensation method in the presence of pyridine as a condensing agent. PAHBP was thoroughly characterized by Fourier transform infrared, ¹H and ¹³C NMR, ultraviolet–visible spectrometry, and gel permeation chromatography. The inherent viscosity of the polymer was 0.35 dL/g in tetrahydrofuran. The degree of branching was 0.53, which confirmed the branched architecture of the polymer. Furthermore, thermogravimetric analysis, differential scanning calorimetry, and polarized optical microscopy were used to examine the thermal stability and thermotropic liquid‐crystalline properties of the hyperbranched polyester. The polymer exhibited a nematic mesophase over a wide range of temperatures. The photoreactivity of PAHBP was studied by photolysis under ultraviolet light. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 53–61, 2006