A Novel,Facile Method for the Preparation of Uniform,Reactive Maleic Anhydride/Vinyl Acetate Copolymer Micro‐ and Nanospheres

Summary: A novel, stabilizer‐free dispersion polymerization with alkyl esters as reaction media gives uniform alternating microspheres of maleic anhydride (MAn)/vinyl acetate (VAc) copolymer. The diameter of the copolymer microspheres could be precisely controlled from 80 to 750 nm by changing the monomer concentration or feed ratio. Moreover, this new type of copolymer microspheres with reactive anhydride groups on the surface has good solubility in common nontoxic solvents such as water and ethanol.

SEM image of the powder surface of copolymer microspheres formed at [MAn] = [VAc] = 1.5 M .     

Investigation of stabilizer‐free dispersion polymerization process of styrene and maleic anhydride copolymer microspheres

The copolymer microspheres of styrene (St) and maleic anhydride (MA) were synthesized by stabilizer‐free dispersion polymerization, and the polymerization process was explored in detail. The results showed that the homopolymerization of St formed in initial polymerization period served as stabilizer, and reaction solvent of closer solubility parameter would benefit the stabilizer‐free dispersion polymerization. In addition, some principal factors affecting the microspheres size, such as reaction time, reaction temperature, monomer concentration, molar feed ratio, reaction media, and cosolvent, were investigated as well. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Preparation of polymer nanoparticles from renewable biobased furfuryl alcohol and maleic anhydride by stabilizer‐free dispersion polymerization

The spherical polymer nanoparticles of biobased renewable monomers, furfuryl alcohol (FA) and maleic anhydride (MAn), with diameters (D_n) in the range of 120 to 500 nm have been prepared by stabilizer‐free dispersion copolymerization. In acetate or its mixture, the conversion of the monomers greatly depended on the concentration of AIBN. When the molar ratio of AIBN/monomers was 3.6% (wt), the monomer conversion could be as high as 80%. The aggregations of the solvated polymer chains formed the nuclei of the polymer particles. After the nucleation stage, both the monomer conversions and particle sizes increased steadily, while the coefficient of variation of the particle size decreased. The almost linear relationship between the D_n³ and the weight of polymer suggested that there is no significant secondary nucleation. The copolymer of FA and MAn could not dissolve in common organic solvents. Elemental analyses, FTIR and ¹³CP‐MAS spectra showed that the copolymer was close to the alternative copolymer of FA and MAn irrespective to the molar ratios of FA/MAn in monomer feed. Furthermore, the two 2,5‐ and 3,4‐dihydrofuran ring configurations exist in the copolymer and the later is the major one. The reaction of copolymer particles with triethylenetetramine confirmed the reactivity of the succinic anhydride groups at the surface of copolymer particles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Monodisperse polystyrene microspheres prepared by dispersion polymerization with microwave irradiation

Monodisperse polystyrene microspheres with diameters of 200–500 nm were prepared by dispersion polymerization with microwave irradiation with poly(N‐vinylpyrrolidone) as a steric stabilizer and 2,2′‐azobisisobutyronitrile as a radical initiator in an ethanol/water medium. The morphology, size, and size distribution of the polystyrene microspheres were characterized with transmission electron microscopy and photon correlation spectroscopy, and the formed films of the polystyrene dispersions were characterized with atomic force microscopy. The effects of the monomer concentration, stabilizer concentration, and initiator concentration on the size and size distribution of the polystyrene microspheres were investigated. The polystyrene microspheres prepared by dispersion polymerization with microwave irradiation were smaller, more uniform, and steadier than those obtained with conventional heating. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2368‐2376, 2005     

Effect of reaction parameters on the dispersion polymerization of 1‐vinyl‐2‐pyrrolidone

Nonporous hydrogel microspheres 0.1–1.3 μm in diameter were prepared by the dispersion copolymerization of 1‐vinyl‐2‐pyrrolidone and ethylene dimethacrylate as a crosslinking agent. The crosslinking was evidenced by solid state ¹³C NMR and elemental analysis. The effect of various parameters including selection of solvent (cyclohexane, butyl acetate), initiator (4,4′‐azobis(4‐cyanopentanoic acid), 2,2′‐azobisisobutyronitrile, dibenzoyl peroxide) and stabilizer on the properties of resulting microspheres has been studied. Dynamic light scattering and photographic examination were used for determination of the diameter and polydispersity of microspheres. Increasing concentration of steric stabilizer in the initial polymerization mixture decreased the particle size. The particle size depended on the molecular weight of polystyrene‐block‐hydrogenated polyisoprene stabilizer, but not on the number of PS and polybutadiene blocks in the styrene–butadiene block copolymer stabilizers. Dibenzoyl peroxide used as an initiator resulted in agglomeration of particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 653–663, 2000     

A polarity‐activation strategy for the high incorporation of 1‐alkenes into functional copolymers via RAFT copolymerization

A new synthetic methodology for the preparation of copolymers having high incorporation of 1‐alkene together with multifunctionalities has been developed by polarity‐activated reversible addition‐fragmentation chain transfer (RAFT) copolymerization. This approach provides well‐defined alternating poly(1‐decene‐alt‐maleic anhydride), expanding the monomer types for living copolymerizations. Although neither 1‐decene (DE) nor maleic anhydride (MAn) has significant reactivity in RAFT homopolymerization, their copolymers have been synthesized by RAFT copolymerizations. The controlled characteristics of DE‐MAn copolymerizations were verified by increased copolymer molecular weights during the copolymerization process. Ternary copolymers of DE and MAn, with high conversion of DE, could be obtained by using additive amounts (5 mol %) of vinyl acetate or styrene (ST), demonstrating further enhanced monomer reactivities and complex chain structures. When ST was selected as the third monomer, copolymers with block structures were obtained, because of fast consumption of ST in the copolymerization. Moreover, a wide variety of well‐defined multifunctional copolymers were prepared by RAFT copolymerizations of various functional 1‐alkenes with MAn. For each copolymerization, gel permeation chromatography analysis showed that the resulting copolymer had well‐controlled M_n values and fairly low polydispersities (PDI = 1.3–1.4), and ¹H and ¹³C NMR spectroscopies indicated strong alternating tendency during copolymerization with high incorporation of 1‐alkene units, up to 50 mol %. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3488–3498, 2008     

Copper(0)‐mediated radical copolymerization of vinyl acetate and acrylonitrile in DMSO at ambient temperature

In this work, Cu(0)‐mediated radical copolymerization of vinyl acetate (VAc) and acrylonitrile (AN) was explored. The polymerization was carried out at 25°C with 2,2′‐bipyridine as ligand and dimethyl sulfoxide as solvent. The copolymerization proceeded smoothly producing moderately controlled molecular weights at low VAc feed ratios. The high VAc feed ratios generated low polymerization rate and poorly controlled molecular weights. FTIR, ¹H NMR, and differential scanning calorimetry confirmed the successful obtaining of the copolymers. Based on ¹H NMR spectra, the reactivity ratios of VAc and AN were calculated to be 0.003 and 1.605, respectively. This work conveyed the first example for the Cu(0)‐mediated radical polymerization of AN and VAc, wherein VAc cannot be homopolymerized by Cu(0)‐mediated radical polymerization technique. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

极性介质中醋酸乙烯酯的辐照引发分散聚合

用钴 60γ射线引发醋酸乙烯酯的分散聚合 ,通过选择各种极性溶剂体系 ,确立了醋酸乙烯酯在极性介质中稳定的分散聚合体系 .对异丙醇 水体系 ,聚合物分子量随剂量率的降低、稳定剂含量的增加、单体浓度的增大、反应温度的升高以及醇水比的降低而增加 .运用XPS、元素分析等表征聚合物粒子 ,及通过辐射接枝理论的分析 ,可以判断稳定剂所起的稳定作用主要是以物理吸附为主     

Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Effects of the reaction parameters on the properties of thermosensitive poly(N‐isopropylacrylamide) microspheres prepared by precipitation and dispersion polymerization

Poly(N‐isopropylacrylamide) (PNIPAAm)‐based microspheres were prepared by precipitation and dispersion polymerization. The effects of several reaction parameters, such as the type and concentration of the crosslinker (N,N′‐methylenebisacrylamide or ethylene dimethacrylate), medium polarity, concentration of the monomer and initiator, and polymerization temperature, on the properties were examined. The hydrogel microspheres were characterized in terms of their chemical structure, size and size distribution, and morphological and temperature‐induced swelling properties. A decrease in the particle size was observed with increasing polarity of the reaction medium or increasing concentration of poly(N‐vinylpyrrolidone) as a stabilizer in the dispersion polymerization. The higher the content was of the crosslinking agent, the lower the swelling ratio was. Too much crosslinker gave unstable dispersions. Although the solvency of the precipitation polymerization mixture controlled the PNIPAAm microsphere size in the range of 0.2–1 μm, a micrometer range was obtained in the Shellvis 50 and Kraton G 1650 stabilized dispersion polymerizations of N‐isopropylacrylamide in toluene/heptane. Typically, the particles had fairly narrow size distributions. Copolymerization with the functional glycidyl methacrylate monomer afforded microspheres with reactive oxirane groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 968–982, 2006     

Free‐radical copolymerization of vinyl esters using fluoroalcohols as solvents: The solvent effect on the monomer reactivity ratio

Free‐radical copolymerizations of vinyl acetate (VAc = M₁) and other vinyl esters (= M₂) including vinyl pivalate (VPi), vinyl 2,2‐bis(trifluoromethyl)propionate (VF6Pi), and vinyl benzoate (VBz) with fluoroalcohols and tetrahydrofuran (THF) as the solvents were investigated. The fluoroalcohols affected not only the stereochemistry but also the polymerization rate. The polymerization rate was higher in the fluoroalcohols than in THF. The accelerating effect of the fluoroalcohols on the polymerization was probably due to the interaction of the solvents with the ester side groups of the monomers and growing radical species. The difference in the monomer reactivity ratios (r₁, r₂) in THF and 2,2,2‐trifluoroethanol was relatively small for all reaction conditions and for the monomers tested in this work, whereas r₁ increased in the VAc‐VF6Pi copolymerization and r₂ decreased in the VAc‐VPi copolymerization when perfluoro‐tert‐butyl alcohol was used as the solvent. These results were ascribed to steric and monomer‐activating effects due to the hydrogen bonding between the monomers and solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 220–228, 2000     

RAFT/MADIX copolymerization of vinyl acetate and 5,6‐benzo‐2‐methylene‐1,3‐dioxepane

The synthesis of well‐defined degradable poly(vinyl acetate) analogues is achieved by RAFT copolymerization of 5,6‐benzo‐2‐methylene‐1,3‐dioxepane (BMDO) and vinyl acetate (VAc) using methyl (ethoxycarbonothioyl)sulfanyl acetate (MEA) as controlling agent. Several monomer mixtures with low BMDO contents (<30 mol %) are employed to prepare different copolymers. In all the cases, the evolution of molar masses and the dispersity values (<1.26) confirm the controlled feature of the polymerization. The livingness of the obtained chains is demonstrated by successful chain extension experiments with VAc, although the presence of dead chains is also shown. The introduction of ester groups into the main chain of these P(VAc‐co‐BMDO) copolymers allows their degradation when treated with a mixture of KOH/MeOH in reflux during 2.5 h. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 104–111     

Nonaqueous dispersion polymerization of styrene in methanol with the ionomer block copolymer poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer

The nonaqueous dispersion polymerization of styrene in methanol with poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer was investigated. There was no observable inducing period or autoacceleration in the polymerization process. The conversion increased almost linearly with the polymerization time as high as 80%. The average sizes of the obtained polystyrene particles increased, and the size distributions of the polystyrene particles tended to become narrower, with increasing conversion. The mechanism of the dispersion polymerization in the presence of polyisobutene‐b‐poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)] was nucleation/growth. When the stabilizer/monomer ratio (w/w) was greater than 2.0%, the polystyrene dispersion was stable, and there was no observable polymer particle coagulation taking place during the whole polymerization process. The average diameter of the polymer particles can be mediated through changes in the polymerization conversion, monomer, and stabilizer. Nearly monodispersed polystyrene particles with average diameters of approximately 0.45–2.21 μm were obtained under optimal conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2678–2685, 2004     

Dispersion copolymerization of styrene and other vinyl monomers in polar solvents

Dispersion polymerization is a very attractive method for preparing micrometer‐size monodisperse polymer particles. The applications of microspheres have been greatly expanded by the use of copolymers. Here, the dispersion copolymerization of styrene and seven other vinyl monomers was carried out in polar solvents. The effect of the different comonomers on the particle size was systematically investigated. The particle size first decreased and then increased with an increasing fraction of acrylamide in the monomer feed, and at a higher fraction of such a comonomer, only a gel‐like polymer was obtained. The particle size also increased with the increase in the contents of the hydrophilic comonomers in the monomer mixtures, and the copolymer molecular weight decreased meanwhile. Although the amount of the hydrophobic comonomer in the monomer mixture changed, the particle size was hardly affected. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 555–561, 2001     

Mn2(CO)10‐induced controlled/living radical copolymerization of vinyl acetate and methyl acrylate: Spontaneous formation of block copolymers consisting of gradient and homopolymer segments

The controlled/living radical polymerization of vinyl acetate (VAc) and its copolymerization with methyl acrylate (MA) were investigated in bulk or fluoroalcohols using manganese complex [Mn₂(CO)₁₀] in conjunction with an alkyl iodide (R? I) as an initiator under weak visible light. The manganese complex induced the controlled/living radical polymerization of VAc even in the fluoroalcohols without any loss of activity. The R? I/Mn₂(CO)₁₀ system was also effective for the copolymerization of MA and VAc, in which MA was consumed faster than VAc, and then the remaining VAc was continuously and quantitatively consumed after the complete consumption of MA. The ¹H and ¹³C NMR analyses revealed that the obtained products are block copolymers consisting of gradient MA/VAc segments, in which the VAc content gradually increases, and homopoly(VAc). The use of fluoroalcohols as solvents increased the copolymerization rate, controllability of the molecular weights, and copolymerizability of VAc. The saponification of the VAc units in poly(MA‐grad‐VAc)‐block‐poly(VAc) resulted in the corresponding poly(MA‐co‐γ‐lactone)‐block‐poly(vinyl alcohol) due to the intramolecular cyclization between the hydroxyl and neighboring carboxyl groups in the gradient segments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1343–1353, 2009     

Radical copolymerization of novel trifluorovinyl ethers with ethyl vinyl ether and vinyl acetate: Estimating reactivity ratios and understanding reactivity behavior of the propagating radical

Two novel trifluorovinyl ether (TFVE) monomers were copolymerized with either ethyl vinyl ether (EVE) or vinyl acetate (VAc) in a redox‐initiated aqueous emulsion: 1‐(2‐phenoxyethoxy)‐1,2,2‐trifluoroethene (Ph‐TFVE) and 1‐[2‐(2‐ethoxyethoxy)ethoxy]‐1,2,2‐trifluoroethene (Et‐TFVE). Previous studies demonstrated a propensity for radical hydrogen abstraction from the oligoether pendant group during the homopolymerization of Et‐TFVE with continued propagation of the resulting radical, thereby providing the rationale to investigate the copolymerization of our new TFVEs with EVE or VAc. Reactivity ratios were estimated using the error‐in‐variables model from a series of bulk free radical copolymerizations of Ph‐TFVE with EVE or VAc. The reactivity ratios were r_Ph‐TFVE = 0.25 ± 0.07, r_EVE = 0.016 ± 0.04; r_Ph‐TFVE = 0.034 ± 0.04, r_VAc =0.89 ±0.08. Partial hydrolysis of polymers containing VAc to vinyl alcohol (VA) resulted in two terpolymers: poly(Ph‐TFVE‐co‐VAc‐co‐VA) and poly(Et‐TFVE‐co‐VAc‐co‐VA), respectively. We investigated the possibility of hydrogen abstraction from VAc during polymerization by comparing the molar mass before and after hydrolysis. Abstraction from VAc was not apparent during polymerization; however, abstraction from the oligoether pendant group of Et‐TFVE was again evident and was more significant for those copolymers having a greater fraction of Et‐TFVE in the monomer feed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1344–1354, 2000     

Copolymerization with the feeding of one of the comonomers: Cationic activated monomer copolymerization of ε‐caprolactone with ethylene oxide

The cationic copolymerization of ε‐caprolactone with ethylene oxide (EO) under the conditions of activated monomer polymerization, that is, with a low‐molecular‐weight diol as an initiator and BF₃ etherate as a catalyst, was studied. To ensure the uniform composition of the resulting copolymers (telechelic oligodiols), the copolymerization was conducted with incremental feeding of the EO comonomer, which was more reactive in the cationic process. ¹H NMR analysis of samples isolated at different stages of the copolymerization indicated that the average composition of the copolymer was indeed nearly constant over the course of the copolymerization. Matrix‐assisted laser desorption/ionization time‐of‐flight spectra of the products revealed, however, that for the same degree of polymerization, macromolecules containing different numbers of EO units were present. The observed distribution was compared with the distribution simulated under the assumption that the probability of incorporating a given unit depended only on the feed composition (nearly constant during the copolymerization). With this assumption, a good agreement between the observed and simulated spectra was obtained. This indicated that, even when the optimum conditions for the formation of a uniform copolymer were created, the individual macromolecules differed in composition because of the statistical character of the copolymerization. The results of differential scanning calorimetry analysis were compatible with such a conclusion; two melting peaks appeared on differential scanning calorimetry curves when a sample was heated immediately after fast cooling, and this may indicate the presence of different types of crystallites. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3788–3796, 2005     

Phosphonate‐terminated poly(vinyl acetate) synthesized by RAFT/MADIX polymerization

Four different xanthates containing either phosphonate or bisphosphonate moieties were synthesized with high degree of purity. These xanthates were used as chain transfer agents (CTA) in the RAFT/MADIX polymerization of vinyl acetate (VAc) to prepare end‐capped poly(VAc). The rate of VAc polymerization in the presence of these new CTAs was shown to be similar to that obtained with conventional xanthate, that is, (methyl ethoxycarbonothioyl) sulfanyl acetate. Good control of VAc polymerization was also obtained since the molecular weight increased linearly with monomer conversion for each phosphonate‐containing xanthate. Low‐PDI values were obtained, ascribed to efficient exchange during RAFT/MADIX polymerization. C_ex value was therefore calculated to about 25, based on RAFT/MADIX of VAc in the presence of rhodixan A1/VAc adduct. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controlled radical polymerization of N‐vinylcaprolactam mediated by xanthate or dithiocarbamate

Controlled radical polymerization of N‐vinylcaprolactam (NVCL) via reversible addition‐fragmentation chain transfer (RAFT) polymerization or macromolecular design via the interchange of xanthate (MADIX) was described, employing 2‐diphenylthiocarbamoylsulfanyl‐2‐methyl‐propionic acid (CTA1), ((O‐ethylxanthyl)methyl)benzene (CTA2) and (1‐(O‐ethylxanthyl)ethyl)benzene (CTA3) as chain transfer agents (CTA). It was found that all the CTAs led to controlled radical polymerization of NVCL, with the molecular weight increased along with the conversion of monomer and a relatively narrow molecular weight distribution could be obtained, as determined with matrix‐assisted laser desorption and ionization time‐of‐flight (MALDI‐TOF) and gel permeation chromatography (GPC), the polydispersity indices, as determined by MALDI‐TOF, were typically on the order of 1.24, but the polymerization did not proceed in a strictly living manner. The chain transfer ability of these CTAs was in the following order: CTA1 ≈ CTA2 < CTA3. MALTI‐TOF measurement showed that the major population of polymer retained the chain‐end functional group, but minor population deactivated by radical coupling. In preparation of the block copolymer of NVCL and vinyl acetate (VAc) by sequential polymerization, the sequence of monomer addition was important. Using VAc as the first monomer could lead to a block copolymer presenting a unimodal GPC trace and a narrow PDI index, and if NVCL was used as the first monomer, the polymerization was less well controlled. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3756–3765, 2008     

Photoinitiated dispersion polymerization of methyl methacrylate: A quick approach to prepare polymer microspheres with narrow size distribution

Photoinitiated dispersion polymerization of methyl methacrylate was carried out in a mixture of ethanol and water as dispersion medium in the presence of poly(N‐vinylpyrrolidone) (PVP) as the steric stabilizer and Darocur 1173 as photoinitiator. 93.7% of conversion was achieved within 30 min of UV irradiation at room temperature, and microspheres with 0.94 μm number–average diameter and 1.04 polydispersity index (PDI) were obtained. X‐ray photoelectron spectroscope (XPS) analysis revealed that only parts of surface of the microspheres were covered by PVP. The particle size decreased from 2.34 to 0.98 μm as the concentration of PVP stabilizer increased from 2 to 15%. Extra stabilizer (higher than 15%) has no effect on the particle size and distribution. Increasing medium polarity or decreasing monomer and photoinitiator concentration resulted in a decrease in the particle size. Solvency of reaction medium toward stabilizer, which affects the adsorption of stabilizer on the particle surface, was shown to be crucial for controlling particle size and uniformity because of the high reaction rate in photoinitiated dispersion polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1329–1338, 2008