A computational mechanistic study of the deamination reaction of melamine

A detailed computational study of the deamination reaction of melamine by OH^–, n H₂O/OH^–, n H₂O (where n = 1, 2, 3), and protonated melamine with H₂O, has been carried out using density functional theory and ab initio calculations. All structures were optimized at M06/6‐31G(d) level of theory, as well as with the B3LYP functional with each of the basis sets: 6‐31G(d), 6‐31 + G(d), 6‐31G(2df,p), and 6‐311++G(3df,3pd). B3LYP, M06, and ω B97XD calculations with 6‐31 + G(d,p) have also been performed. All structures were optimized at B3LYP/6‐31 + G(d,p) level of theory for deamination simulations in an aqueous medium, using both the polarizable continuum solvation model and the solvation model based on solute electron density. Composite method calculations have been conducted at G4MP2 and CBS‐QB3. Fifteen different mechanistic pathways were explored. Most pathways consisted of two key steps: formation of a tetrahedral intermediate and in the final step, an intermediate that dissociates to products via a 1,3‐proton shift. The lowest overall activation energy, 111 kJ mol^?1 at G4MP2, was obtained for the deamination of melamine with 3H₂O/OH^?.     

Quantum mechanical study of the ring-closing reaction of the hexatriene radical cation

The ring-closing reaction of hexatriene radical cation 1(*)(+) to 1,3-cyclohexadiene radical cation 2(*)(+) was studied computationally at the B3LYP/6-31G* and QCISD(T)/6-311G*//QCISD/6-31G* levels of theory. Both, concerted and stepwise mechanisms were initially considered for this reaction. Upon evaluation at the B3LYP level of theory, three of the possible pathways-a concerted C(2)-symmetric via transition structure 3(*)(+) and stepwise C(1)-symmetric pathways involving three-membered ring intermediate 5(*)(+) and four-membered ring intermediate 6(*)(+)-were rejected due to high-energy stationary points along the reaction pathway. The two remaining pathways were found to be of competing energy. The first proceeds through the asymmetric, concerted transition structure 4(*)(+) with an activation barrier E(a) = 16.2 kcal/mol and an overall exothermicity of -23.8 kcal/mol. The second pathway, beginning from the cis,cis,trans rotamer of 1(*)(+), proceeds by a stepwise pathway to the cyclohexadiene product with an overall exothermicity of -18.6 kcal/mol. The activation energy for the rate-determining step in this process, the formation of the intermediate bicyclo[3.1.0]hex-2-ene via transition structure 9(*)(+), was found to be 20.4 kcal/mol. More rigorous calculations of a smaller subsection of the potential energy hypersurface at the QCISD(T)//QCISD level confirmed these findings and emphasized the importance of conformational control of the reactant.     

苯并氧化呋咱稳定性和异构化的DFT和ab initio研究

运用B3LYP/6-31G(d)密度泛函理论（DFT）方法对苯并氧化呋咱、邻二亚硝基苯及其间的异构化反应进行了计算研究。结果表明,苯并氧化呋咱的分子总能量比邻二亚硝基苯的低;由苯并氧化呋咱异构为邻二亚硝基苯的正向反应活化能（Ea+=51.0kJ/mol）,与文献实测值（58.6kJ/mol）较接近,而其逆向反应活化能（Ea-=4.6kJ/mol）很小,从而揭示了苯并氧化呋咱比邻二亚硝基苯更稳定·此外,进行了HF/3-21G、HF/6-31G(d)和MP2/6-31G(d)//6-31G(d)水平下相应的计算,发现B3LYP-DFT的结果较abinitio为优。谐振动频率的B3LYP/6-31G(d)计算还支持了邻二亚硝基苯为苯并氧化呋咱“自-自”互变重排反应的中间体。     

The reaction mechanism of the gas‐phase thermal decomposition kinetics of neopentyl halides: A DFT study

The kinetics and mechanisms of the gas‐phase elimination reactions of neopentyl chloride and neopentyl bromide have been studied by means of electronic structure calculations using density functional methods: B3LYP/6‐31G(d,p), B3LYP/ 6‐31++G(d,p), MPW1PW91/6‐31G(d,p), MPW1PW91/6‐31++G(d,p), PBEPBE/6‐31G(d,p), PBEPBE /6‐31++G(d,p). The reaction channels that account in products formation have a common first step involving a Wagner‐Meerwein rearrangement. The migration of the halide from the terminal carbon to the more substituted carbon is followed by beta‐elimination of HCl or HBr to give two olefins: the Sayzeff and Hoffmann products. Theoretical calculations demonstrated that these eliminations proceed through concerted asynchronous process. The transition state (TS) located for the rate‐determining step shows the halide detached and bridging between the terminal carbon and the quaternary carbon, while the methyl group is also migrating in a concerted fashion. The TS is described as an intimate ion‐pair with a large negative charge at the halide atom. The concerted migration of methyl group provides stabilization of the TS by delocalizing the electron density between the terminal carbon and the quaternary carbon. The B3LYP/6‐31++G(d,p) allows to obtain reasonable energies and enthalpies of activation. The nature of these reactions is examined in terms of geometrical parameters, electron distribution, and bond order analysis. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

DFT study of the gas‐phase thermal decomposition kinetics of 2‐ethoxypyridine into 2‐pyridone

The mechanism of the gas‐phase elimination kinetics of 2‐ethoxypyridine has been studied through the electronic structure calculations using density functional methods: B3LYP/6‐31G(d,p), B3LYP/6‐31++G(d,p), B3PW91/6‐31G(d,p), B3PW91/6‐31++G(d,p), MPW1PW91/6‐31G(d,p), MPW1PW91/6‐31++G(d,p), PBEPBE/6‐31G(d,p), PBEPBE/6‐31++G(d,p), PBE1PBE1/6‐31G(d,p), and PBE1PBE1/6‐31++G(d,p). The elimination reaction of 2‐ethoxypyridine occurs through a six‐centered transition state geometry involving the pyridine nitrogen, the substituted carbon of the aromatic ring, the ethoxy oxygen, two carbons of the ethoxy group, and a hydrogen atom, which migrates from the ethoxy group to the nitrogen to give 2‐pyridone and ethylene. The reaction mechanism appears to occur with the participation of π‐electrons, similar to alkyl vinyl ether elimination reaction, with simultaneous ethylene formation and hydrogen migration to the pyridine nitrogen producing 2‐pyridone. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

DFT investigation of the mechanism of CH2CO + O(3P) reaction

A detailed theoretical survey of the potential energy surface (PES) for the CH₂CO + O(³P) reaction is carried out at the QCISD(T)/6‐311+G(3df,2p)//B3LYP/6‐311+G(d,p) level. The geometries, vibrational frequencies, and energies of all stationary points involved in the reaction are calculated at the B3LYP/6‐311+G(d,p) level. More accurate energy information is provided by single‐point calculations at the QCISD(T)/6‐311+G(3df,2p) level. Relationships of the reactants, transition states, intermediates, and products are confirmed by the intrinsic reaction coordinate (IRC) calculations. The results suggest that P1(CH₂+CO₂) is the most important product. This study presents highlights of the mechanism of the title reaction. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Density functional computational studies on 2‐[(2,4‐Dimethylphenyl)iminomethyl]‐3,5‐dimethoxyphenol

Density functional calculations of the structure, molecular electrostatic potential, and thermodynamic functions have been performed at B3LYP/6‐31G(d) level of theory for the title compound of 2‐[(2,4‐dimethylphenyl)iminomethyl]‐3,5‐dimethoxyphenol ( I ). To investigate the tautomeric stability, optimization calculations at B3LYP/6‐31G(d) level were performed for the enol and keto forms of I . Calculated results reveal that the enol form of I is more stable than its keto form. The predicted nonlinear optical properties of I are much greater than ones of urea. The changes of thermodynamic properties for the formation of the title compound with the temperature ranging from 200 to 500 K have been obtained using the statistical thermodynamic method. At 298.15 K, the change of Gibbs free energy for the formation reaction of I is 32.973 kJ/mol. The title compound can not be spontaneously produced from the isolated monomers at room temperature. The tautomeric equilibrium constant is computed as 0.868 at 298.15 K for enol‐imine?keto‐amine tautomerization of I . In addition, natural bond orbital analysis of I was performed using the B3LYP/6‐31G(d) method. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Theoretical study on the mechanism of the NCO + HCNO reaction

The complex doublet potential surface of the NCO + HCNO reaction has been investigated at the QCISD(T)/6-311g(d,p)//UB3LYP/6-31G(d,p) level. We have found 29 isomers on the potential surface, which are connected by 38 transition states. The single-point energy calculations are performed at the high-level QCISD(T)/6-311G(d,p) for more accurate energy values. In various possible initial association ways, the end-N attack leading to HC2N2O2 a1 and a2 is the most favorable association way through a barrierless process. Through the thermodynamic and kinetic analyses, the product NO + CO + HCN should be the major product in both the low- and high-temperature conditions for its low-energy determination transition state. Our calculation is consistent with the available data in low-temperature condition and expected to be confirmed in the high-temperature condition.     

Computational study on the aminolysis of beta-hydroxy-alpha,beta-unsaturated ester via the favorable path including the formation of alpha-oxo ketene intermediate

The possible mechanisms of the aminolysis of N-methyl-3-(methoxycarbonyl)-4-hydroxy-2-pyridone (beta-hydroxy-alpha,beta-unsaturated ester) with dimethylamine are investigated at the hybrid density functional theory B3LYP/6-31G(d,p) level in the gas phase. Single-point computations at the B3LYP/6-311++G(d,p) and the Becke88-Becke95 1-parameter model BB1K/6-311++G(d,p) levels are performed for more precise energy predictions. Solvent effects are also assessed by single-point calculations at the integral equation formalism polarized continuum model IEFPCM-B3LYP/6-311++G(d,p) and IEFPCM-BB1K/6-311++G(d,p) levels on the gas-phase optimized geometries. Three possible pathways, the concerted pathway (path A), the stepwise pathway involving tetrahedral intermediates (path B), and the stepwise pathway via alpha-oxo ketene intermediate due to the participation of beta-hydroxy (path C), are taken into account for the title reaction. Moreover, path C includes two sequential processes. The first process is to generate alpha-oxo ketene intermediate via the decomposition of N-methyl-3-(methoxycarbonyl)-4-hydroxy-2-pyridone; the second process is the addition of dimethylamine to alpha-oxo ketene intermediate. Our results indicate that path C is more favorable than paths A and B both in the gas phase and in solvent (heptane). In path C, the first process is the rate-determining step, and the second process is revealed to be a [4+2] pseudopericyclic reaction without the energy barrier. Being independent of the concentration of amine, the first process obeys the first-order rate law.     

低硝酸盐离子N2O22-和亚硝酸HONO的异构体及其异构化反应的量化研究

采用Gaussian-98程序进行，在HF／6—31G(d)，B3LYP／6—31G(d)和MP2／6—31G(d)水平下优化分子结构并寻找过渡态，对于MP2／6—31G(d)结果在QCISD(T，E4T)，MP4／6—311 G(d，p)，MP4／6—311 G(2df，p)水平下重新计算能级．并用内禀反应坐标(IRC)法研究了N2O2^2-和亚硝酸HONO的异构化反应机理。     

DFT法研究3-羟基丙烯醛的双键旋转异构反应机理

利用密度泛函理论(DFT)分别在B3LYP/6-31G**和B3LYP/6-311＋＋G**的计算水平上优化了基态3-羟基丙烯醛分子在双键旋转异构反应过程中的平衡态以及过渡态的几何构型，分析了反应过程中键参数的变化，计算了该反应的内禀反应坐标(IRC)，发现在重排反应途径上存在一个四元环骨架的中间体.通过振动分析对平衡态和过渡态进行了确认，并得到了零点能.计算结果表明，基态3-羟基丙烯醛分子的双键旋转异构反应经过两步完成，第一步反应位垒稍高，第二步反应位垒较低，存在着发生重排反应的可能性.     

Computational study of the deamination reaction of cytosine with H2O and OH-

The mechanism for the deamination reaction of cytosine with H(2)O and OH(-) to produce uracil was investigated using ab initio calculations. Optimized geometries of reactants, transition states, intermediates, and products were determined at RHF/6-31G(d), MP2/6-31G(d), and B3LYP/6-31G(d) levels and for anions at the B3LYP/6-31+G(d) level. Single-point energies were also determined at B3LYP/6-31+G(d), MP2/GTMP2Large, and G3MP2 levels of theory. Thermodynamic properties (DeltaE, DeltaH, and DeltaG), activation energies, enthalpies, and free energies of activation were calculated for each reaction pathway that was investigated. Intrinsic reaction coordinate analysis was performed to characterize the transition states on the potential energy surface. Two pathways for deamination with H(2)O were found, a five-step mechanism (pathway A) and a two-step mechanism (pathway B). The activation energy for the rate-determining steps, the formation of the tetrahedral intermediate for pathway A and the formation of the uracil tautomer for pathway B, are 221.3 and 260.3 kJ/mol, respectively, at the G3MP2 level of theory. The deamination reaction by either pathway is therefore unlikely because of the high barriers that are involved. Two pathways for deamination with OH(-) were also found, and both of them are five-step mechanisms. Pathways C and D produce an initial tetrahedral intermediate by adding H(2)O to deprotonated cytosine which then undergoes three conformational changes. The final intermediate dissociates to product via a 1-3 proton shift. Deamination with OH(-), through pathway C, resulted in the lowest activation energy, 148.0 kJ/mol, at the G3MP2 level of theory.     

2-(2-巯苯基)苯并噁唑分子内质子转移的理论研究

在B3LYP/6-31G(d,p)水平上研究了2-(2-巯苯基)苯并噁唑气态中五种异构体(E1, E2, E3, E4和K)在气态中的稳定性及其在基态下的质子转移, 同时结合极化连续介质模型(PCM)研究了水、二甲亚砜、乙腈、乙醇、苯胺和环己烷等对2-(2-巯苯基)苯并噁唑溶剂化作用的影响. 研究结果表明, 醇式异构体E1为2-(2-巯苯基)苯并噁唑的优势构型; 在E1向K(酮式异构体)转变过程中, 存在一个较小的能垒; 当考虑零点振动能(ZPVE)后, 逆向能垒消失. 在溶液中, 随着溶剂极性的增强, 醇式异构体E1与K之间的反应平衡向K方向移动, 在非极性溶剂环己烷中, E1为优势构型, 而在强极性水溶液中, K为优势构型.     

Computational study on 1,1,3,3-tetramethylguanidine-catalyzed cyanosilylation mechanism of hypnone

The reaction mechanism of cyanosilylation of hypnone catalyzed by 1,1,3,3-tetramethylguanidine (TMG) was investigated using the density functional theory at the Becke three-parameter hybrid functional combined with Lee–Yang–Parr correlation functional (B3LYP)/6-31G(d), B3LYP/6-31G(d, p) and B3LYP/6-311++G(d, p) levels. The results show that the title reaction occurs through two processes, the formation of the intermediate five through the interaction of TMG with trimethylsilyl cyanide (TMSCN) and the reaction between the intermediate five and hypnone. The formation of intermediate five controls the whole reaction with a Gibbs free energy barrier of 31.84 kcal/mol. In addition, the results indicate that the catalyst TMG significantly promotes the title reaction and changes the mechanism. The results are in reasonable agreement with the experimental observations. Our results reveal that the overall reaction is stepwise and exoergonic in solvent-free conditions at room temperature.     

Computer-assisted study on the reaction between pyruvate and ylide in the pathway leading to lactyl–ThDP

In this study the formation of the lactyl-thiamin diphosphate intermediate (L-ThDP) is addressed using density functional theory calculations at X3LYP/6-31++G(d,p) level of theory. The study includes potential energy surface scans, transition state search, and intrinsic reaction coordinate calculations. Reactivity is analyzed in terms of Fukui functions. The results allow to conclude that the reaction leading to the formation of L-ThDP occurs via a concerted mechanism, and during the nucleophilic attack on the pyruvate molecule, the ylide is in its AP form. The calculated activation barrier for the reaction is 19.2?kcal/mol, in agreement with the experimental reported value.     

Theoretical study of the mechanism for the gas‐phase pyrolysis kinetics of 2‐methylbenzyl chloride

The study of the kinetics and mechanism of dehydrochlorination reaction of 2‐methyl benzyl chloride in the gas phase was carried out by means of electronic structure calculations using ab initio Móller‐Plesset MP2/6‐31G(d,p), and Density Functional Theory (DFT) methods: B3LYP/6‐31G(d,p), B3LYP/6‐31++G(d,p), MPW1PW91/6‐31G(d,p), MPW1PW91/6‐31++G(d,p)], PBE/6‐31G(d,p), PBE/6‐31++G(d,p). Investigated reaction pathways comprise: Mechanism I, a concerted reaction through a six‐centered cyclic transition state (TS) geometry; Mechanism II, a 1,3‐chlorine shift followed by beta‐elimination and Mechanism III, a single‐step elimination with simultaneous HCl and benzocyclobutene formation through a bicyclic type of TS. Calculated parameters ruled out Mechanism III and suggest the elimination reaction may occur by either unimolecular Mechanism I or Mechanism II. However, the TS of the former is 20 kJ/mole more stable than the TS of the latter. Consequently, the Mechanism I seem to be more probable to occur. The rate‐determining process is the breaking of C‐Cl bond. The involvement of π‐electrons of the aromatic system was demonstrated by NBO charges and bond order calculations. The reaction is moderately polar in nature. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 537–546, 2011     

Addition reaction of adamantylideneadamantane with Br2 and 2Br2: a computational study

Ab initio calculations were carried out for the reaction of adamantylideneadamantane (Ad=Ad) with Br2 and 2Br2. Geometries of the reactants, transition states, intermediates, and products were optimized at HF and B3LYP levels of theory using the 6-31G(d) basis set. Energies were also obtained using single point calculations at the MP2/6-31G(d)//HF/6-31G(d), MP2/6-31G(d)//B3LYP/6-31G(d), and B3LYP/6-31+G(d)//B3LYP/6-31G(d) levels of theory. Intrinsic reaction coordinate (IRC) calculations were performed to characterize the transition states on the potential energy surface. Only one pathway was found for the reaction of Ad=Ad with one Br2 producing a bromonium/bromide ion pair. Three mechanisms for the reaction of Ad=Ad with 2Br2 were found, leading to three different structural forms of the bromonium/Br3- ion pair. Activation energies, free energies, and enthalpies of activation along with the relative stability of products for each reaction pathway were calculated. The reaction of Ad=Ad with 2Br2 was strongly favored over the reaction with only one Br2. According to B3LYP/6-31G(d) and single point calculations at MP2, the most stable bromonium/Br3- ion pair would form spontaneously. The most stable of the three bromonium/Br3- ion pairs has a structure very similar to the observed X-ray structure. Free energies of activation and relative stabilities of reactants and products in CCl4 and CH2ClCH2Cl were also calculated with PCM using the united atom (UA0) cavity model and, in general, results similar to the gas phase were obtained. An optimized structure for the trans-1,2-dibromo product was also found at all levels of theory both in gas phase and in solution, but no transition state leading to the trans-1,2-dibromo product was obtained.     

Mechanisms for the deamination reaction of cytosine with H2O/OH(-) and 2H2O/OH(-): a computational study

Mechanisms for the deamination reaction of cytosine with H 2O/OH (-) and 2H 2O/OH (-) to produce uracil were investigated using ab initio calculations. Optimized geometries of reactants, transition states, intermediates, and products were determined at MP2 and B3LYP using the 6-31G(d) basis set and at B3LYP/6-31+G(d) levels of theory. Single point energies were also determined at MP2/G3MP2Large and G3MP2 levels of theory. Thermodynamic properties (Delta E, Delta H, and Delta G), activation energies, enthalpies, and free energies of activation were calculated for each reaction pathway investigated. Intrinsic reaction coordinate (IRC) analysis was performed to characterize the transition states on the potential energy surface. Seven pathways for the deamination reaction were found. All pathways produce an initial tetrahedral intermediate followed by several conformational changes. The final intermediate for all pathways dissociates to product via a 1-3 proton shift. The activation energy for the rate-determining step, the formation of the tetrahedral intermediate for pathway D, the only pathway that can lead to uracil, is 115.3 kJ mol (-1) at the G3MP2 level of theory, in excellent agreement with the experimental value (117 +/- 4 kJ mol (-1)).     

二氯亚甲基锗烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet dichloromethylene germylene and ethylene has been investigated with B3LYP/6-31G＊ method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies for the involved conformations were calculated by CCSD（T）//B3LYP/6-31G＊ method. On the basis of the surface energy profile obtained with CCSD（T）// B3LYP/6-31G＊ method for the cycloaddition reaction between singlet dichloromethylene germylene and ethylene, it can be predicted that the dominant reaction pathway is that an intermediate INT1 is firstly formed between the two reactants through a barrier-free exothermic reaction of 61.7 kJ/mol, and the intermediate INT1 then isomerizes to an active four-membered ring product P2.1 via a transition state TS2, an intermediate INT2 and a transition state TS2.1, in which energy barriers are 57.7 and 42.2 kJ/mol, respectively.