Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

Side-chain cholesteric liquid crystalline elastomers derived from a mesogenic crosslinking agent: I. Synthesis and mesomorphic properties

The synthesis of new side-chain cholesteric elastomers derived from a cholesteric monomer and mesogenic crosslinking agent is presented. The chemical structures of the monomers obtained were confirmed by elemental analyses, FT-IR, ¹H NMR, and ¹³C NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarizing optical microscopy (POM), and X-ray diffraction (XRD) measurements. M₁ showed cholesteric phase, and M₂ displayed enantiotropic nematic phase and monotropic smectic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

Side‐chain cholesteric liquid‐crystalline elastomers derived from smectic crosslinking units: Synthesis and phase behavior

New side‐chain cholesteric liquid‐crystalline elastomers containing cholesteryl 4‐allyloxybenzoate as cholesteric mesogenic units and biphenyl 4,4′‐bis(10‐undecen‐1‐ylenate) as smectic crosslinking units were synthesized. The chemical structures of the olefinic compounds and polymers obtained were confirmed by element analysis, Fourier transform infrared, proton nuclear magnetic resonance, and carbon‐13 nuclear magnetic resonance spectra. The mesogenic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The influence of the concentration of the crosslinking unit on the phase behavior of the elastomers was examined. The elastomers containing less than 17 mol % of the crosslinking units revealed elasticity, reversible mesomorphic phase transition, wider mesophase temperature ranges, and higher thermal stability. The experimental results demonstrated that the glass‐transition temperature, isotropization temperature, and mesophase temperature ranges decreased with an increasing concentation of the crosslinking unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5262–5270, 2004     

Mesomorphic properties of side-chain cholesteric liquid-crystalline elastomers

New monomer cholesteryl 4-(10-undecylen-1-yloxybenzoyloxy)-4′-ethoxybenzoate (M₁), crosslinking agent biphenyl 4,4′-bis(10-undecylen-1-yloxybenzoyloxy-p-ethoxybenzoate) (M₂) and a series of side-chain cholesteric elastomers were prepared. The chemical structures of the monomers and elastomers obtained were confirmed by element analyses, FT-IR, and ¹H NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. The influence of the content of the crosslinking unit on the phase behavior of the elastomers was examined. M ₁ showed cholesteric phase, and M ₂ displayed nematic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

Side chain cholesteric liquid crystalline elastomers: synthesis and phase behaviour

A series of new side chain cholesteric liquid crystalline elastomers (P-2–P-6) containing the nematic crosslinking monomer 4-(10-undecen-1-yloyloxy)benzoyl-4′-allyloxybenzoyl-p-benzenediol bisate (M-1) and the cholesteric monomer 4-cholesteryl 4-(10-undecen-1-yloyloxy)benzoate (M-2) were synthesized. The chemical structures of the monomers and elastomers obtained were confirmed by FTIR and ¹H NMR spectroscopy. Their liquid crystalline properties and phase behaviour were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction. The effect of the crosslinking units on phase behaviour is discussed. Elastomers containing less than 20?mol?% of the crosslinking units showed elasticity, reversible phase transitions and cholesteric Grandjean texture. The experimental results demonstrated that the glass transition and isotropization temperatures of P-2–P-6 increased with the increasing concentration of crosslinking unit M-1.     

The effect of mesogenic and non-mesogenic crosslinking units on the phase behaviour of side-chain smectic and cholesteric elastomers

Chiral monomer (M₁ ), mesogenic and non-mesogenic crosslinking agents (C₁ and C₂ ), and the corresponding liquid crystalline elastomers (P₁ and P₂ series), have been synthesised. Their chemical structures have been characterised by Fourier transform infrared or ¹H nuclear magnetic resonance and their phase behaviour investigated by differential scanning calorimetry, polarising optical miscoscopy, thermo-gravimetric analysis (TGA) and X-ray diffraction. The effect of the crosslinking unit on the phase behaviour of the elastomers has been studied. M₁ showed a cholesteric oily streak and focal conic texture. C₂ exhibited a nematic enantiotropic thread-like and schlieren texture, and a monotropic fan-shaped texture in the S_A phase. Due to the introduction of the mesogenic crosslinking unit, elastomers, P_2-1 ?P_2-5 , exhibited a cholesteric phase, while elastomers, P_1-1 ?P_1-4 , derived from a non-mesogenic crosslinking unit, exhibit a S_A phase. As the content of the crosslinking unit increased, the T _g of the P₁ series initially decreased and then increased, and the T _i of the series decreased. In the P₂ series the T _g increased, but the T _i initially increased and then decreased. TGA confirmed that all the elastomers had improved thermal stability.     

Synthesis and properties of polysiloxane side chain cholesteric elastomers

The synthesis of new side chain cholesteric liquid crystalline elastomers containing the flexible non-mesomorphic crosslinking agent M-1 and the cholesteric monomer M-2 by a one-step hydrosilylation reaction is described. The chemical structures of the obtained monomers and network polymers were confirmed by ¹H NMR and FTIR spectroscopy. The mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The glass transition temperatures and isotropic temperatures of the mesomorphic elastomers decreased as the concentration of crosslinking units increased; in the mesomorphic region the liquid crystalline elastomers showed elasticity, reversible phase transitions and Grandjean texture. The flexible crosslinking agent did not disturb the cholesteric structure; moreover, it was beneficial for adjusting the helix of the cholesteric liquid crystalline polymers, and cholesteric elastomers P-6, P-7, show reversible selective reflection of visible light.     

Synthesis and characterization of side-chain cholesteric elastomers derived from an isosorbide crosslinking agent

New liquid crystalline monomer 4-(4-ethoxybenzoyloxy)biphenyl-4′-[(10-undecylen-1-yloxy)-4′-ethoxy]benzoate (M ₁ ), chiral crosslinking agent isosorbide di-(10-undecylen-1-yloxybenzoate) (M ₂ ), and the corresponding elastomers were prepared. The chemical structures of M ₁ and M ₂ were characterized by Fourier transform infrared and ¹H-nuclear magnetic resonance. The mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. M ₁ exhibited typical threaded texture and droplet texture of nematic phase. The use of chiral crosslinking agent in the polymer networks could induce cholesteric phase. The elastomers containing less than 10 mol% of the chiral crosslinking units showed elasticity, reversible phase transition, wide mesophase temperature ranges, and high thermal stability. For the elastomers P ₂ –P ₄ , the glass transition temperature (T _g) increased; clearing temperature (T _i) and mesophase temperature range (ΔT) decreased with increasing content of the crosslinking unit.     

Temperature dependence of the phase separation in ethyl cyanoethyl cellulose/poly(acrylic acid)/4′‐n‐pentyl‐4‐cyano‐biphenyl composite films

A novel polymer‐dispersed liquid‐crystal film consisting of micrometer‐scale liquid‐crystal droplets in ultraviolet‐cured polymer composite matrices with cholesteric order was prepared and the influence of cure temperature on the phase separation was studied. The existence and pitch of the ethyl cyanoethyl cellulose cholesteric liquid‐crystalline phase were influenced by the existence of low molecular weight liquid crystals. The macromolecular cholesteric phase disappeared when the 4′‐n‐pentyl‐4‐cyano‐biphenyl concentration was over 40 wt %, and 4′‐n‐pentyl‐4‐cyano‐biphenyl domains were dispersed in the isotropic matrix of the polymer composite. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1334–1341, 2002     

Influence of different nematic crosslinking unit on mesomorphism of side-chain cholesteric elastomers containing menthyl groups

The synthesis of two cholesteric monomers (M₁ and M₂), nematic crosslinking agent (C₁ and C₂), and the corresponding side-chain elastomers containing menthyl groups (P₁ and P₂ series) is described. The mesomorphism was investigated by differential scanning calorimetry, polarizing optical microscopy, X-ray diffraction, and thermogravimetric analysis. The effect of the content of the different nematic crosslinking unit on the mesomorphism of the elastomers was discussed. M₁ and M₂ showed cholesteric and blue phases; C₁ and C₂ showed nematic phase. Because of the introduction of the nematic crosslinking unit, elastomers P_1-1−P_1-5 and P_2-1−P_2-5 exhibited cholesteric phase. With increasing the content of nematic crosslinking unit, T _g of the obtained elastomers revealed an increased tendency, and T _i of P₁ series firstly increased then decreased, while T _i of P₂ series decreased the mesomorphism of the corresponding elastomers when the content of nematic crosslinking unit was 12 mol.%.     

Mesomorphic and conducting properties of dendritic‐linear copolymers via ion‐doped additives

We studied the conducting and mesomorphic behavior of a dendritic‐linear copolymer on adding hydrophilic additives and lithium salts. For the preparation of the pristine block copolymer ( A ), a click reaction of a hydrophobic Y‐shaped dendron block and a hydrophilic linear poly(ethylene oxide) coil with M_n = 750 g mol^?1 was performed. For ionic block copolymer samples ( 1–3 ), a hydrophilic compound ( B ) bearing two tri(ethylene oxide) chains was used as the additive. In all ionic samples, the lithium concentration per ethylene oxide was chosen to be 0.05. As characterized by polarized optical microscopy and small angle X‐ray scattering techniques, copolymer A showed a hexagonal columnar mesophase. On addition of lithium‐doped additives, ionic samples 1 and 2 with the additive weight fractions (f_w) of 10 and 20%, columnar and bicontinuous structures coexisted in the liquid crystalline phase. On the other hand, ionic sample 3 with f_w = 30% displayed only a bicontinuous cubic mesophase. Based on the impedance results, with increasing the amount of additives, the conductivity value increased from 3.80 × 10^?6 to 2.34 × 10^?5 S cm^?1 at 35 °C. The conductivity growth could be explained by the interplay of the plasticization effect of the mobile additive and the morphological transformation from 1D to 3D of the ion‐conducting cylindrical cores. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polyurethane elastomers based on amphiphilic poly(caprolactone)‐b‐poly(butadiene)‐b‐poly(caprolactone) triblockcopolyols

Hydroxyl‐terminated poly(butadiene) (HTPB; M_n = 2100 g mol⁻¹) was capped with 30 and 60 wt % of ɛ‐caprolactone to reach amphiphilic triblock copolymers in form of capped poly(butadiene) CPB. The former (CPB30; M_n = 3300 g/mol) is amorphous with a glass temperature of −56 °C. CPB60 (M_n = 4000 g mol⁻¹) is semi‐crystalline with a melting point of 50 °C and a glass transition at −47 °C. The CPBs, HTPB and polycaprolactone diol (M_n = 2000 g mol⁻¹) were used as soft segment components in the preparation of polyurethane elastomers (PUE), using a 1/1 mixture of an MDI prepolymer and uretonimine modified MDI, and hard phase components in form of 1,3‐propane diol, 1,4‐butane diol, and 1,5‐pentane diol. CPB‐based elastomers with 1,4 butane diol (8 wt %) show hard domains as fringed aggregates with a better connection to the continuous phase than the HTPB‐based PUE. The soft segment glass transition temperature (T_g) is at −28 °C for HTPB‐based PUE and at −43 °C for those of CPB. The tensile strength of the CPB30&60‐based PUE is found between 20 and 30 MPa at an elongation at break of 400% and 550%, respectively. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1162–1172     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Polymethylene‐block‐polystyrene copolymers: A new synthetic approach using a combination of polyhomologation and reversible addition‐fragmentation chain‐transfer polymerization and their microfibers and microspheres fabricated through electrospinning process

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of polyhomologation of ylides and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization of styrene. Trithiocarbonate‐terminated polymethylenes (PM‐TTCB) (M_n = 1400 g mol^?1; M_w/M_n = 1.09 and M_n = 2100 g mol^?1; M_w/M_n = 1.20) were obtained via an esterification of S?1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetate) trithiocarbonate with hydroxyl‐terminated polymethylene synthesized via polyhomologation of ylides followed by oxidation. Then, a series of PM‐b‐PS (M_n = 5500–34,000 g mol^?1; M_w/M_n = 1.12–1.25) diblock copolymers were obtained by RAFT polymerization of styrene using PM‐TTCB as a macromolecular chain‐transfer agent. The chain structures of all the polymers were characterized by proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography, and Fourier transform infrared spectroscopy. The thiocarbonylthio end‐group of PM‐b‐PS was transformed into thiol group by aminolysis and confirmed by UV–vis spectroscopy. In addition, microfibers and microspheres of such diblock copolymers were fabricated by electrospinning process and observed by scanning electron microscopy (SEM). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2892–2899     

Synthesis of poly(p‐phenylene) macromonomers and multiblock copolymers

Rigid‐rod poly(4′‐methyl‐2,5‐benzophenone) macromonomers were synthesized by Ni(0) catalytic coupling of 2,5‐dichloro‐4′‐methylbenzophenone and end‐capping agent 4‐chloro‐4′‐fluorobenzophenone. The macromonomers produced were labile to nucleophilic aromatic substitution. The molecular weight of poly(4′‐methyl‐2,5‐benzophenone) was controlled by varying the amount of the end‐capping agent in the reaction mixture. Glass‐transition temperatures of the macromonomers increased with increasing molecular weight and ranged from 117 to 213 °C. Substitution of the macromonomer end groups was determined to be nearly quantitative by ¹H NMR and gel permeation chromatography. The polymerization of a poly(4′‐methyl‐2,5‐benzophenone) macromonomer [number‐average molecular weight (M_n) = 1.90 × 10³ g/mol; polydispersity (M_w)/M_n = 2.04] with hydroxy end‐capped bisphenol A polyaryletherketone (M_n = 4.50 × 10³ g/mol; M_w/M_n = 1.92) afforded an alternating multiblock copolymer (M_n = 1.95 × 10⁴ g/mol; M_w/M_n = 6.02) that formed flexible, transparent films that could be creased without cracking. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3505–3512, 2001     

Synthesis of POSS–polyurethane hybrids using octakis(m‐isoprenyl‐α,α′‐dimethylbenzylisocyanato dimethylsiloxy) octasilsesquioxane (Q8M8TMI) as a crosslinking agent

A series of polyurethane hybrid networks have been synthesized using octakis(m‐isoprenyl‐α,α′‐dimethylbenzylisocyanato dimethylsiloxy) octasilsesquioxane (Q₈M₈^TMI) as a crosslinking agent. The formation of the urethane linkages within the polyurethane hybrids was confirmed by photoacoustic FTIR spectroscopy. The TGA and DSC studies demonstrated that the incorporation of the POSS crosslinking agents altered the thermal properties of the polyurethanes, and that this was dependent on the length of the polyethylene glycol chain. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5038–5045     

Influence of molecular weight on the phase behaviors of comb‐like polymers with long n‐alkyl side chains based on mesogen‐jacketed liquid crystalline polymers

A series of comb‐like polymers, poly{2,5‐bis[(4‐octadecyloxyphenyl)oxycarbonyl]‐styrenes{ (P‐OC18s) with different molecular weights (M_n) and low molecular weight distributions have been successfully synthesized via atom transfer radical polymerization. The phase behaviors have been investigated by a combination of techniques including differential scanning calorimetry, polarized optical microscopy, wide‐angle X‐ray diffraction, and temperature‐variable FTIR spectroscopy. One hand, phase behaviors of the alkyl tails were strongly influenced by the mesogens of polymers, leading to the poor packing of the alkyl tails and the low melting. The other hand, the liquid crystalline phase structures of polymers were found to be strongly M_n dependent. The samples with M_n ≤ 4.6 × 10⁴ formed a smectic phase in low temperature and an isotropic phase in high temperature. The samples with M_n ≥ 5.2 × 10⁴ displayed a reentrant isotropic phase, which was separating the smectic phase and columnar nematic phase. Meantime, the experiment results showed that the glass temperature and the transition temperature from smectic phase to isotropic phase both slightly increased with the increase of M_nS; however, the transition temperature from isotropic phase to columnar phase sharply decreased with the M_nS improved. The reappearance of isotropic phase is due to the competing between the driving force of the enthalpy and the driving force of the entropy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,structure, and properties of chiral liquid crystal monomers and polymers based on menthol

To study structure–mesomorphism relationships of the monomers and polymers based on menthol, four new chiral monomers ( M₁ – M₄ ) and the corresponding homopolymers ( P₁ – P₄ ) with menthyl group were synthesized. Their chemical structures, formula, phase behavior, and thermal stability were characterized by FTIR, ¹H NMR, ¹³C NMR, elemental analyses, differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction, and thermogravimetric analysis. The selective reflection of light was investigated with ultraviolet/visible spectrometer. The influence of the mesogenic core rigidity, spacer length, and menthyl steric effect on the mesomorphism of M₁ – M₄ and P₁ – P₄ was examined. By inserting a flexible spacer between the mesogenic core and the terminal menthyl groups, four target monomers and polymers could form the expected mesophase. Moreover, their melting temperature (T_m), glass transition temperature (T_g), clearing temperature (T_i), and mesophase range (ΔT) increased with increasing the mesogenic core rigidity; whereas the T_m and T_g decreased, T_i and ΔT increased with an increase of the spacer length. M₁ and M₂ showed monotropic and enantiotropic cholesteric phase, respectively, whereas M₃ and M₄ all revealed chiral smectic C (SmC*), cholesteric and cubic blue phases. In addition, with increasing temperature, the selective reflection of light shifted to the long wavelength region at the SmC* phase range and to the short wavelength region at the cholesteric range, respectively. P₁ and P₂ only showed a smectic A (SmA) phase, whereas P₃ and P₄ exhibited the SmC* and SmA phases. All the obtained polymers had very good thermal stability. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

Synthesis of three‐armed poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline)‐block‐poly(ε‐caprolactone) copolymers

A series of novel types of three‐armed poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline)‐block‐poly(ε‐caprolactone) (PHpr‐b‐PCL) copolymers were successfully synthesized via melt block copolymerization of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) and ε‐caprolactone (ε‐CL) with a trifunctional initiator trimethylolpropane (TMP) and stannous octoate (SnOct₂) as a catalyst. For the homopolycondensation of N‐CBz‐Hpr with TMP initiator and SnOct₂ catalyst, the number‐average molecular weight (M_n) of prepolymer increases from 530 to 3540 g mol^?1 with the molar ratio of monomer to initiator (3–30), and the molecular weight distribution (M_w/M_n) is between 1.25 to 1.32. These three‐armed prepolymer PHpr were subsequently block copolymerized with ε‐caprolactone (ε‐CL) in the presence of SnOct₂ as a catalyst. The M_n of the copolymer increased from 2240 to 18,840 g mol^?1 with the molar ratio (0–60) of ε‐CL to PHpr. These products were characterized by differential scanning calorimetry (DSC), ¹H NMR, and gel permeation chromatography. According to DSC, the glass‐transition temperature (T_g) of the three‐armed polymers depended on the molar ratio of monomer/initiator that were added. In vitro degradation of these copolymers was evaluated from weight‐loss measurements and the change of M_n and M_w/M_n. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1708–1717, 2005     

Synthesis and characterization of model polybutadiene‐1,4‐b‐polydimethylsiloxane‐b‐polybutadiene‐1,4 copolymers

Model copolymers of poly(butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS‐b‐PB, were synthesized by sequential anionic polymerization (high vacuum techniques) of 1,3‐butadiene and hexamethylciclotrisiloxane (D₃) on sec‐BuLi followed by chlorosilane‐coupling chemistry. The synthesized copolymers were characterized by nuclear magnetic resonance (¹H NMR), size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). SEC and ¹H NMR results showed low polydispersity indexes (M_w/M_n) and variable siloxane compositions, whereas DSC and TGA experiments indicated that the thermal stability of the triblock copolymers depends on the PDMS composition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2726–2733, 2007