位相调制的实时联合变换相关器

提出一种位相调制的实时联合变换相关器。它采用液晶显示屏作为输入器件，用液晶光阀记录和显示联合功率谱。利用液晶显示屏上的光栅状结构的衍射级，提高光能的利用率，并充分利用液晶光阀的有效使用面积。采用成像透镜放大各衍射级的联合频谱，适应液晶光阀较低的分辨率要求。在相关器的光路中插入两块倾斜的平行平面玻璃板，以改变各衍射级的参考图像和目标图像之间的位相差。这种方法可产生比传统的实时联合变换相关器更好的输出相关性能。实验结果证实了该系统设计及性能分析的正确性     

使用振幅调制和功率谱相减的联合变换相关器作多目标检测

提出一种使用振幅调制和功率谱相减的联合变换相关器作多目标检测，这一方法对联合功率谱作了修正，先将联合功率谱减去纯输入景物的功率谱和参考图象的功率谱，再将所得修正的联合功率谱乘以振幅调制滤波函数。分析和量化了输入景物噪声对联合变换相关器性能的影响。这种方法比条纹调节的联合变换相关器和修正的条纹调节的联合变换相关器能产生更好的相关输出和适应输入景物噪声的能力。     

位相调制的实时联全变换相关器

提出了一种位相调制的实时联合变换相关器，它采用液晶显示屏作为输入器件，用液晶光阀记录和显示联合功率谱。利用液晶显示屏光栅状结构的衍射级，提高光能的利用率，度充分利用液晶光阀的有效使用面积。采用成像透镜放大各衍射级的联合频谱，适应液晶光阀较低的分辩率要求。     

联合变换相关器在光纤检测中离焦影响的讨论

对联合变换相关器在光纤检测中离焦采集谱问题进行了理论分析,计算机模拟以及光纤缺陷检测实验。得出了离焦距离与相关峰值的关系曲线,示出了对不同相似程度的输入物的离焦谱和焦面谱两种情况下进行相关的计算机模拟结果;提供了在焦面上和离焦一定范围两种情况下缺陷程度不同的光纤的相关检测结果。     

光电混合联合变换相关器的三维跟踪原理

把联合变换相关原理引入视差测距系统，从而使系统在一次图像相关处理中同时求出运动目标的方向变化和与距离值有确定唯一关系的视差。本文作了原理性实验。相关平面照片上清晰地显示了表示运动目标方向变化和视差的各对相关点。     

高通滤波的二元联合变换相关器

提出一种新的采用高通滤波的二元联合变换相关器，这种相关器与一般的二元联合变换相关器的差别在于联合功率谱作二元处理之前先进高通滤波，使用这种技术，可以产生比二元联合变换相关器更好地相关输出性能，给出对含有灰度级场体的输入景物的计算机模拟结果。     

多目标识别的联合变换相关器的研究

提出了一种可用于多目标识别的联合变换相关器。为改善相关信号的性能,对功率谱作了优化处理。为消除相关面上的零级项和目标间的相关项,可用联合功率谱减去纯目标输入的功率谱和参考图像的功率谱;为增强和锐化相关峰,将相减的功率谱作指数函数滤波处理。分析了指数滤波参数对相关结果的影响。计算机模拟结果表明,这种相关器所输出的相关信号比经典联合变换相关器和二元联合变换相关器输出的相关信号更好,互相关得到了抑制,自相关得到了增强,具有很好的抗噪能力。     

光电混合光盘存储二值化联合变换相关器

本文提出了基于光盘存储的单空间光调制器光电混合联合变换相关系统,该系统采用视频光盘建立参考图象库,充分结合了联合变换相关器的内在优点和光盘系统的高信息存储能力,能实时地给出相关识别结果,是适合于机器人视觉的一种有效系统。文末给出了计算机模拟结果和初步的光学实验结果。     

光电混合变换相关器在体视测距中的应用

本文研究了体视测距系统的图像联合变换相关原理，推导出利用像联合变换相关测量目标距离的公式。同时，本文表明把光电混合联合变换相关器用于体视测距系统的原理装置和测距实验。     

一种新的相位编码幅值调节联合变换相关器

给出了一种对经典联合变换相关器进行相位编码和幅值调节的新方法,使联合变换相关器具有优化的相关输出信号和很强的抗干扰能力.在相位编码幅值调节联合变换相关器中,输入的待识别信号首先通过相位模板进行相位编码,然后对联合功率谱进行幅值调节滤波.在进行幅值调节滤波时采用了增强型幅值调节滤波器,其调节因子可根据输信号的噪音干扰情况进行调节变化.相位编码幅值调节有效地祛除了多目标识别联合变换相关器的冗余信号,可广泛的应用于多目标识别.     

Rotation invariant Target Detection Using a Hybrid Optical Circular Harmonic Joint Transform Correlator with DC Bias

１ＩｎｔｒｏｄｕｃｔｉｏｎＦｏｒｒｏｔａｔｉｏｎｉｎｖａｒｉａｎｔｐａｔｅｒｎｒｅｃｏｇｎｉｔｉｏｎ,ｔｈｅｓｐａｔｉａｌｍａｔｃｈｅｄｃｏｒｅｌａｔｏｒｉｓｏｆｔｅｎｕｓｅｄｂｙｔａｋｉｎｇａｃｉｒｃｕｌａｒｈａｒｍｏｎｉｃｃｏｍｐｏｎｅｎｔ（ＣＨ...     

Multitarget Detection Using a Hybrid Optical Joint Transform Correlator with Power Spectrum Subtraction

Multitarget detection using a hybrid optical joint transform correlator with power spectrum subtraction is proposed. This architecture is a programmable single spatial light modulator joint transform correlator. It consists of a liquid crystal display panel, an imaging lens, and a liquid crystal light valve to enhance resolution and space-bandwidth production. In this technique, it has two joint images in the input plane. In the second joint image, the reference image is contrast-reversal. With this technique, the second joint power spectrum is subtracted from the first joint power spectrum and the subtracted joint power spectrum is then taken the inverse Fourier transform. This technique is found to yield better correlation output performance than that of the classical joint transform correlator. Computer simulation results and the optical experimental results for input scene of the multitarget are given.The results have verified the correctness of the system design and performance analysis.     

激光诱导液晶定向研究

Multiple target detection using a fringe-adjusted and power spectrum subtracted joint transform correlator is proposed. The best factor of the filter to deliver the best correlation output performance is found through computer simulation tests and the result is verified by a programmable single spatial light modulator joint transform correlator. The technique is found to deliver a better correlation output and the capacity to accommodate noise in the input scene than the classical, the previous fringe adjusted and modified fringe adjusted joint transform correlators.     

Multitarget Detection Using a Hybrid Optical Joint Transform Correlator with Power Spectrum Subtraction

１ＩｎｔｒｏｄｕｃｔｉｏｎＦｏｒｍｕｌｔｉｔａｒｇｅｔｄｅｔｅｃｔｉｏｎ,ｔｈｅｊｏｉｎｔｔｒａｎｓｆｏｒｍｃｏｒｅｌａｔｏｒ（ＪＴＣ）ｉｓａｎｅｘｔｒｅｍｅｌｙｕｓｅｆｕｌａｒｃｈｉｔｅｃｔｕｒｅ［１］．ＨｏｗｅｖｅｒｔｈｅｃｌａｓｉｃａｌＪＴＣｐ...     

Multitarget Detection Using a Fringe adjusted and Power Spectrum Subtracted Hybrid Optical Joint Transform Correlator

１ＩｎｔｒｏｄｕｃｔｉｏｎＦｏｒｏｐｔｉｃａｌｐａｔｅｒｎｒｅｃｏｇｎｉｔｉｏｎ,ｔｈｅｊｏｉｎｔｔｒａｎｓｆｏｒｍｃｏｒｅｌａｔｏｒ［１］（ＪＴＣ）ｉｓｍｏｒｅｓｕｉｔａｂｌｅｆｏｒｒｅａｌｔｉｍｅｏｐｔｉｃａｌｐａｔｅｒｎｒｅｃｏｇｎｉｔｉｏｎａ...     

四通道实时联合变换相关器

提出把光学波阵面分割复用器用于单通道实时光电混合联合变换相关系统实现四通道实时相关，使单通道系统扩展为具有多个独立通道的系统，使系统的容量和处理速度提高数倍，使系统的性能得以改善。给出了新系统的设计方案、工作原理和实验结果。     

实时光电混合联合变换相关器单元的实验研究

本文根据联合变换相关的原理，提出了一种实时光电混合联合变换相关器，它采用一个液晶光阀作为输入器件，用另一个液晶光阀记录和显示联合功率谱，所给出的实验结果证实了该系统设计及性能分析的正确性。     

A New Method for Rotation and Brightness Invariant Pattern Recognition Based on Modified Multiple Circular Harmonic Expansions

A new method for rotation and brightness invariant pattern recognition was proposed by applying multiple circular harmonic expansions to the joint transform correlator. The amplitudes of the multiple orders of circular harmonic expansions made from a detecting image were synthetically modified to respond to the same auto-correlation peaks. These modified circular harmonic expansions were arranged in the input plane as reference patterns together with an arbitrary target pattern, and the correlation signals between them were calculated in the subtracted joint transform correlator. The fraction of the correlation-peak intensities between the target and the references were extracted as a new discrimination parameter. This new parameter performs pattern recognition under rotation and brightness invariance with good discriminability. Its high discriminability has been proved in computer simulations using the face image patterns of many individuals.