Determination of complex mixtures of volatile organic compounds in ambient air: canister methodology

Canister methodology is applicable to 150 polar and nonpolar VOCs found in ambient air from parts-per-billion by volume (ppbv) to parts-per-million (ppmv) levels, and has been validated at parts-per-trillion (pptv) levels for a subset of these analytes. This article is a detailed review of techniques related to the collection of volatile organic compounds (VOCs) in evacuated Summa and fused-silica-lined canisters, and their analysis by gas chromatography/mass spectrometry (GC/MS). Emphasis is placed on canister cleaning, VOC stability in canisters, sample dilution, water management, and VOC cryogenic and sorbent preconcentration methods. A wide range of VOC preconcentration and water management methods are identified from the literature, and their relative merits and disadvantages are discussed. Examples of difficulties that commonly arise when processing canister samples are illustrated, and solutions to these problems are provided.     

Ambient air monitoring with Auto-gas chromatography running in trigger mode

Speciated volatile organic compounds (VOC), either as ozone precursors or air toxics in the air, are commonly monitored by triggered canister method or continuous ozone precursor analyzer (commonly known as Auto-gas chromatography (GC)) method. In the triggered canister method, a canister sample is collected when a total non-methane organic compound (TNMOC) concentration exceeds a pre-determined trigger level. The canister sample is then analyzed in a lab in a later time. In the Auto-GC method, an online GC runs in a “continuous” mode with a sampling and analysis cycle of 1 h. Within the cycle hour, samples are collected only during the first 40 min.A new approach of Auto-GC running in trigger mode is developed in this study. This new approach uses Auto-GC but operates it in a trigger mode similar to the triggered canister sampling method. Compared to the triggered canister sample method, this system provides near real-time speciated VOC data, which are critical for responding to a high VOC concentration episode. Although the canister system generally costs less, its cost advantage may diminish if trigger events are frequent and the monitoring duration is long. Compared to continuous Auto-GC, triggered GC has its niche—it is better for capturing transient plumes with a small footprint. The continuous GC either misses a transient plume if the plume does not arrive at the sampling site during the sampling cycle or flattens the plume concentration peak by dilution with non-plume air sample.Field experience with this system for fenceline VOC monitoring is presented. The sampling and calibration strategy for trigger mode operation is described. The chromatograph retention time drift issues are discussed. The system performance is evaluated, including the method detection limit, precision and accuracy. The trigger mode configuration for VOC fenceline or near source monitoring in this work proved effective for local and transient plume identification.     

A review of advances and new developments in the analysis of biological volatile organic compounds

Biological volatile organic compounds (VOCs) are interlinked to biological metabolism and bacterial populations localized on the surfaces of biological samples. The characteristics of biological VOCs at different physiological status or metabolism phases are various, which contain crucial bio-information. In this review, the significance of the study of biological VOCs was introduced, and crucial techniques greatly influencing the investigation were summarized and reviewed including efficient sampling, suitable analytical and bio-information distillation techniques. From the preliminary identification of biological VOC components to the interpretation of biological VOC characteristics is a great improvement in this field, which would provide more abundant bio-information during biological metabolism. Owing to complicated biological VOC compositions, any single sampling or bio-information distillation method could not obtain complete biological VOCs and interpret the biological VOC characteristics, and would result in the loss of effective bio-information. The combination of some suitable sampling and bio-information distillation techniques for the study of biological VOCs and the related bio-information will be a novel trend in the future.     

Validation and modelling of a novel diffusive sampler for determining concentrations of volatile organic compounds in air

A novel diffusive sampler that combines radial and axial diffusion has been developed that improves upon existing commercially available designs. The POcket Diffusive (POD) sampler has been validated under laboratory and field conditions for the measurements of VOCs in ambient air. Laboratory tests varied sampling conditions of temperature (−30–40 C), humidity (10–80%), wind velocity (0.1–4 m s⁻¹), and concentration (0.5–50 μg m⁻³) for a number of specific VOCs. An overall uncertainty of circa 9% for the measurement of benzene is calculated for the validation tests, in compliance with the data quality objectives of the EU air quality directive 2008/50/EC. A semi-empirical diffusion model has been developed to estimate sampling rates for compounds that were not tested, and for conditions outside of tested ranges during validation. The diffusion model (and validation tests) shows a low influence of environmental conditions on the sampling rate for the POD sampler. Average reproducibility values of circa 3% are reported with overall sampling uncertainties ranging from 9% to 15%, for the whole range of tested conditions, depending on the compound. The adsorbent cartridge is compatible with existing thermal desorption systems in the market. The diffusive sampler can modify the sampling rate by changing the diffusive body within a range of different porosities. Field tests, conducted in parallel with independent quality controlled canister sampling, confirmed the ease of use and quality of VOC measurements with the POD sampler, for compounds that were, and were not, evaluated during laboratory tests.     

State-of-the-art of gas chromatography-based methods for analysis of anthropogenic volatile organic compounds in estuarine waters,illustrated with the river Scheldt as an example

This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in estuarine waters. The most critical step, from an analytical point of view, is sample preparation. So far, only purge-and-trap and, to some extent, membrane inlet mass spectrometry have successfully been applied in estuarine monitoring of VOCs. The advantages and disadvantages of both techniques are discussed and novel developments are reviewed. Other key elements in VOC analysis and assessment include quality assurance (QA), quality control (QC) and statistical data analysis. This paper gives a brief overview of QA/QC measures of interest in the estuarine monitoring exercise, and provides guidelines for adequate statistical treatment of environmental data. Finally, field measurements of VOCs in estuarine waters are reviewed. Concentrations are reported, and distribution patterns, sources and time-trends are discussed. In addition to literature data, results of a 3-year monitoring survey (May 1998–November 2000) in the Scheldt estuary are presented.     

Evaluation of a Continuous Composite Sampler for Volatile Organic Compounds in Water

Abstract

The high volatility and low water solubility of volatile organic compounds (VOCs), make the collection of representative samples difficult. The standard grab sampling method only gives information of that moment in time when the sample is taken. When the composition of VOCs is varying, continuous composite sampling will give a more representative sample. However, no thorough evaluation of its use for VOCs has been reported.

The use of an automatic continuous composite sampler for the analysis of VOCs in water was studied. The causes and magnitude of the VOCs losses during the sampling process were determined.

Adsorbent cartridges were used to trap the VOCs escaping from solution during the sampling process. Sorption phenomena occurring on the containers and/or tubings were also evaluated. Sorption losses were much more significant than volatilization losses.

The results indicate that a modified version of this sampler can be an alternative for the long term sampling of water for VOC analysis.     

Sampling and characterisation of volatile organic compound profiles in human saliva using a polydimethylsiloxane coupon placed within the oral cavity

Evaluation of published methods reveals that existing methods for saliva sampling do not address the physical-chemical attributes of volatile organic compounds (VOCs). This study describes and presents evidence for adopting in situ sampling of salivary VOCs directly from the oral cavity using a polydimethylsiloxane (PDMS) based sampler. In vitro studies indicated that the vapour pressure of analytes was a factor in both the recovery of analytes and the precision of the recovery. The highest recoveries were observed for VOCs with the lowest vapour pressures, for example 5-nonanol (vapour pressure (P(v)) = 14 Pa) recoveries were approximately 20 times greater than those observed for octane (P(v) = 1726 Pa). Similarly, relative standard deviations reduced with vapour pressure, with the RSD for 5-nonanol responses observed to be 2.7% when compared to RSD = 26% for octane. Evaluation of VOCs recovered from 6 in vivo samples indicated that VOC concentrations in saliva may follow log-normal distributions; log-normal RSDs falling between 4.4% and 18.2% across the range of volatilities encountered. Increasing sampling time from 1 to 30 minutes indicated that the recovery of VOC into the sampler was affected by interaction between different physical-chemical properties and biogenic flux. A sampling time of 10 min was found to offer an acceptable compromise that enabled a representative sample to be acquired for the widest range of observed VOC behaviours with the sampler. The potential to 'tune' the sampling protocol for targeted analysis based on these factors was also noted. Comparison with passive drool saliva collection revealed up to 10(5) enhancement with reduced variability compared to drooled samples. This approach to in situ saliva sampling appears to have significant analytical utility for studying volatile signatures in humans.     

Development and evaluation of a calibration gas generator for the analysis of volatile organic compounds in air based on the injection method

The development and operational evaluation of a calibration gas generator for the analysis of volatile or ganic compounds (VOC) in air is described. Details of the construction, as well as of the evaluation of the apparatus are presented here. The performance of the test gas generator is validated both by on-line GC analysis of the calibration gas produced and by off-line analysis of adsorptive samples taken from the generated calibration gas. Both, active and passive sampling have been used, and the results demonstrate the excellent accuracy and precision of the generated test gas atmosphere: For the 11 investigated organic compounds (aromatic and halogenated compounds), the found values were in most cases within 5% of the target value with a reproducibility of better than 3% RSD (as determined by the analysis of the sampled adsorbent tubes). Custom made adsorbent tubes were used for active and passive sampling and in both cases were analysed by thermal-desorption GC. Particularly the combination of passive sampling and thermodesorption-GC analysis offers significant advantages over the commonly used active sampling on activated charcoal, followed by CS2 desorption in terms of avoidance of hazardous solvents, potential for automation and improved detection limits. Both sampling techniques are capable for monitoring VOCs at concentrations and under conditions relevant for workplace monitoring.     

Determination of volatile organic compounds in different microenvironments by multibed adsorption and short-path thermal desorption followed by gas chromatographic-mass spectrometric analysis

A multiphase assurance approach was developed for the accurate and precise determination of volatile organic compounds (VOCs) in different microenvironments. This approach includes (i) development of a method including adsorption of VOCs onto a multisorbent media followed by short-path thermal desorption (SPTD) pre-concentration and gas chromatography (GC) coupled to a mass spectrometry (MS) quantification, (ii) validation of the sampling and analytical method and (iii) validation of the data using a multidimensional procedure. Tenax TA and Carbopack B sorbent combinations were used to collect 102 individual VOCs ranging from C5 to C12. Method parameters including thermal desorption temperature, desorption time and cryofocusing temperature were optimized. The average recoveries and method detection limits (MDL) for the target analytes were in the range 80-100% and 0.01-0.14 ppbv, respectively. The method also showed good linearity (R2 > 0.99) and precision (<8%) values. Validation of the method was performed under real environmental conditions at a gas station, in an office and a residential household to examine the influence of variation in meteorological conditions such as temperature and relative humidity and a wide range of VOC concentrations. The sampling and analytical method resulted in successful determination of VOC in different microenvironments. Finally, validation of the data was performed by assessing fingerprint and time series plots and correlation matrices together with meteorological parameters such as mixing height, wind speed and temperature. The data validation procedure provided detection of both faulty data and air pollution episodes.     

System for the generation of standard gas mixtures of volatile and semi-volatile organic compounds for calibrations of solid-phase microextraction and other sampling devices

Standard gases are used for quality control and quality assurance, development of analysis methods and novel air sampling devices. The use of solid-phase microextraction (SPME) and other novel technologies for research in the area of air sampling and analysis requires systems/devices for reliable standard gas generation and sampling. In this paper we describe a new gas standard generating system for volatile organic compounds (VOCs) and semi-VOCs that was designed, built, and tested to facilitate fundamental and applications research with SPME. The system provided for the generation of a wide range of VOC/semi-VOC concentrations and mixing various standard gases, estimation of detection limits, testing the effects of sampling time, air temperature and relative humidity, testing the effects of air velocity and ozone on sampling/extractions. The system can be also used for calibrations of analytical instrumentation, quality control and quality assurance checks, and cross-validations of SPME with/and other sampling techniques.     

An improved Sampling Strategy for the Measurement of VOCs in Air,Based on Cooled Sampling and Analysis by Thermodesorption-GC-MS/FID

Abstract

Reliable and comprehensive sampling methods are required to obtain accurate data for VOC concentrations in air samples. The major drawback of the adsorption tube sampling method, widely employed in environmental studies, is the fact that C₂ compounds are usually not trapped quantitatively.

The focus of this work was thus to improve sampling based on adsorption tubes packed with Molsieve and Carbosieve. To improve the sampling efficiency for the C₂ compounds, a cooling device, based on Peltier cooling was constructed, which could be operated at a temperature down to ?30°C.

Experiments under laboratory and field conditions were carried out to study the influence of the sampling temperatuie on the recovery of ethane and ethene as the most volatile VOCs. The results clearly demonstrate the need for a cooled sampling device for the analysis of C₂ compounds in air. Under the investigated conditions, the recoveries with ambient temperature sampling were only in the range of 38–46% for ethane and 33–59% for ethene respectively, in comparison to the cooled sampling device. These findings are only valid for the described conditions and can change significantly with temperature and concentration. A generalisation of the recovery is thus very difficult to give.

The use of the sampling device for a field study is reported, where samples were collected simultaneously at three different altitudes in a diurnal profile on the slope of the Schulterberg mountain in Tyrol (Austria).     

Development of an analytical technique and stability evaluation of 143 C3-C12 volatile organic compounds in Summa canisters by gas chromatography-mass spectrometry

A technique using Summa canisters with cryogenic preconcentration and gas chromatographic-mass spectrometric (GC-MS) detection was developed to determine 143 C3-C12 volatile organic compounds (VOCs) including alkanes, alkenes, aromatics and halohydrocarbons in ambient and indoor air. The method detection limits and practical quantification limits were sensitive at 0.02 and 0.10 ppbv, respectively, and the method precision and accuracy were also satisfactory. The stability of C3-C12 VOC standards at ppbv levels under elevated pressure in canisters was assessed over various time intervals (from 1 week to 4 months after preparation) and most of the compounds were found to be acceptably stable with a mean recovery of 85.6 +/- 9.9% during the course of a 4-month study. However, a small fraction (approximately 6%) of the compounds, including two halohydrocarbons (bromotrichloromethane and benzyl chloride) and six alkenes (2-methylbuta-1,3-diene (isoprene), cis-4-methylpent-2-ene, cis-3-methylpent-2-ene, hept-1-ene, oct-1-ene and styrene) displayed relatively low recoveries in the range 34.6-67.9%. The loss of these compounds is most probably caused by their physical adherence to the active sites of the canister surface, chemical decomposition and/or reactions with other species. The results indicated that one must be cautious in attempting to measure these compounds owing to their instability in canisters. Overall, this analytical technique, which has been used for the determination of the VOCs under study in the toxic air pollutant monitoring network administered by the HKSAR Government, was amenable to the measurement of airborne VOCs collected both outside and inside a semi-confined car park in the present study.     

Quantification of VOC emission rates from the biosphere

Determining which volatile organic compounds (VOCs) are synthesized by plants and emitted into the atmosphere and at what rates is a critical component of our understanding of the Earth system, as is understanding how these emissions respond to environmental controls and how they may change in the future. Here, we review the methods used to sample biogenic VOC emissions, from the leaf scale to the regional scale, and focus on the challenges that this task presents.     

Construction of an automated gas chromatography/mass spectrometry system for the analysis of ambient volatile organic compounds with on-line internal standard calibration

An automated sampling and enrichment apparatus coupled with a gas chromatography/mass spectrometry (GC/MS) technique was constructed for the analysis of ambient volatile organic compounds (VOCs). A sorbent trap was built within the system to perform on-line enrichment and thermal desorption of VOCs onto GC/MS. In order to improve analytical precision, calibration accuracy, and to safe-guard the long-term stability of this system, a mechanism to allow on-line internal standard (I.S.) addition to the air sample stream was configured within the sampling and enrichment apparatus. A sub-ppm (v/v) level standard gas mixture containing 1,4-fluorobenzene, chloropentafluorobenzene, 1-bromo-4-fluorobenzene was prepared from their pure forms. A minute amount of this I.S. gas was volumetrically mixed into the sample stream at the time of on-line enrichment of the air sample to compensate for measurement uncertainties. To assess the performance of this VOC GC/MS system, a gas mixture containing numerous VOCs at sub-ppb (v/v) level served as the ambient air sample. Various internal standard methods based on total ion count (TIC) and selective ion monitoring (SIM) modes were attempted to assess the improvement in analytical precision and accuracy. Precision was improved from 7-8% RSD without I.S. to 2-3% with I.S. for the 14 target VOCs. Uncertainties in the calibration curves were also improved with the adoption of I.S. by reducing the relative standard deviation of the slope (Sm%) by an average a factor of 4, and intercept (Sb%) by a factor of 2 for the 14 target VOCs.     

Needle microextraction trap for on-site analysis of airborne volatile compounds at ultra-trace levels in gaseous samples

Different capillary needle trap (NT) configurations are studied and compared to evaluate the suitability of this methodology for screening in the analysis of volatile organic compounds (VOCs) in air samples at ultra-trace levels. Totally, 22 gauge needles with side holes give the best performance and results, resulting in good sampling flow reproducibility as well as fast and complete NT conditioning and cleaning. Two different types of sorbent are evaluated: a graphitized carbon (Carbopack X) and a polymeric sorbent (Tenax TA). Optimized experimental conditions were desorption in the GC injector at 300°C, no make-up gas to help the transport of the desorbed compounds to the GC column, 1 min splitless time for injection/desorption, and leaving the NT in the hot injector for about 20 min. Cross-contamination is avoided when samples containing high VOC levels (above likely breakthrough values) are evaluated. Neither carryover nor contamination is detected for storage times up to 48 h at 4°C. The method developed is applied for the analysis of indoor air, outdoor air and breath samples. The results obtained are equivalent to those obtained with other thermal desorption devices but have the advantage of using small sample volumes, being simpler, more economical and more robust than conventional methodologies used for VOC analysis in air samples.     

Gas chromatographic-mass spectrometric analysis of urban-related aquatic and airborne volatile organic compounds. Study of the extracts obtained by water closed-loop stripping and air adsorption with charcoal and polyurethane foam

The distribution of volatile organic compounds (VOC) in urban-influenced air and river waters was investigated. The aquatic VOC were extracted with the closed-loop stripping technique (CLST) and the airborne compounds were studied using two methods, charcoal and polyurethane foam adsorption. In both types of samples, C1-C5 alkylbenzenes and n-alkanes constitute the two major VOC groups, and the presence of these groups indicates a predominance of petroleum products in these two environmental compartments. Chlorinated compounds such as polychlorobenzenes, polychloronaphthalenes and hexachlorobutadiene are abundant in water samples, whereas tetrachloroethene is the predominant chlorinated airborne VOC. The compounds collected with each sampling system can be described in terms of ranges of volatility. These ranges (expressed as mmHg vapour pressure at 25 degrees C) can be defined approximately as 140 (methylcyclopentane)-0.65 (n-undecane) for charcoal, 5.1 (n-nonane)-0.000061 (n-docosane) for polyurethane foam and 29 (toluene)-0.000029 (n-eicosane) for the CLST. Parallel air sampling with charcoal and polyurethane foam is therefore needed to cover a VOC range similar to that afforded by the CLST in water.     

Relaxed eddy accumulation,a new technique for measuring emission and deposition fluxes of volatile organic compounds by capillary gas chromatography and mass spectrometry

The possibility afforded by a new relaxed eddy accumulation system in the determination of emission and deposition fluxes of volatile organic compounds (VOCs) by chromatographic techniques will be presented. The system, especially designed to limit sampling artifacts, uses adsorption traps filled with solid sorbents as reservoirs for VOC collection. Enriched compounds were analyzed by capillary GC and positive identification and quantification of eluted compounds was Achieved by mass-spectrometric detection. The method has been used to quantify the emission and deposition of both biogenic and anthropogenic VOCs over a Mediterranean forest ecosystem located in Central Italy. For the first time, both daily and seasonal trends of anthropogenic and biogenic VOCs will be reported. The consistency of monoterpene fluxes with predictions based on the knowledge of VOC emission from the dominant vegetation species will be tested. Data have been used to develop a novel algorithm to predict the seasonality of biogenic emission from the forest ecosystem.     

VOCs Are Relevant Biomarkers of Elicitor-Induced Defences in Grapevine

Grapevine is susceptible to fungal diseases generally controlled by numerous chemical fungicides. Elicitors of plant defence are a way of reducing the use of these chemicals, but still provide inconsistent efficiency. Easy-to-analyse markers of grapevine responses to elicitors are needed to determine the best conditions for their efficiency and position them in protection strategies. We previously reported that the elicitor sulphated laminarin induced the emission of volatile organic compounds (VOCs) by grapevine leaves. The present study was conducted to characterise and compare VOC emissions in response to other elicitors. Bastid^® was first used to test the conditions of VOC collection and analysis. Using SBSE-GC-MS, we detected several VOCs, including the sesquiterpene α-farnesene, in a time-dependent manner. This was correlated with the induction of farnesene synthase gene expression, in parallel with stilbene synthesis (another defence response), and associated to resistance against downy mildew. The other elicitors (Redeli^®, Romeo^®, Bion^®, chitosan, and an oligogalacturonide) induced VOC emission, but with qualitative and quantitative differences. VOC emission thus constitutes a response of grapevine to elicitors of various chemical structures. Therefore, VOC analysis is relevant for studying the impact of environmental factors on grapevine defence responses and optimising the performance of elicitors in vineyards.     

Determination of volatile organic compounds in recycled polyethylene terephthalate and high-density polyethylene by headspace solid phase microextraction gas chromatography mass spectrometry to evaluate the efficiency of recycling processes

A method for the determination of volatile organic compounds (VOCs) in recycled polyethylene terephthalate and high-density polyethylene using headspace sampling by solid-phase microextraction and gas chromatography coupled to mass spectrometry detection is presented. This method was used to evaluate the efficiency of cleaning processes for VOC removal from recycled PET. In addition, the method was also employed to evaluate the level of VOC contamination in multilayer packaging material containing recycled HDPE material. The optimisation of the extraction procedure for volatile compounds was performed and the best extraction conditions were found using a 75 μm carboxen-polydimethylsiloxane (CAR-PDMS) fibre for 20 min at 60 °C. The validation parameters for the established method were linear range, linearity, sensitivity, precision (repeatability), accuracy (recovery) and detection and quantification limits. The results indicated that the method could easily be used in quality control for the production of recycled PET and HDPE.     

Insights into the Intraspecific Variability of the above and Belowground Emissions of Volatile Organic Compounds in Tomato

The in-vivo monitoring of volatile organic compound (VOC) emissions is a potential non-invasive tool in plant protection, especially in greenhouse cultivation. We studied VOC production from above and belowground organs of the eight parents of the Multi-Parent Advanced Generation Intercross population (MAGIC) tomato population, which exhibits a high genetic variability, in order to obtain more insight into the variability of constitutive VOC emissions from tomato plants under stress-free conditions. Foliage emissions were composed of terpenes, the majority of which were also stored in the leaves. Foliage emissions were very low, partly light-dependent, and differed significantly among genotypes, both in quantity and quality. Soil with roots emitted VOCs at similar, though more variable, rates than foliage. Soil emissions were characterized by terpenes, oxygenated alkanes, and alkenes and phenolic compounds, only a few of which were found in root extracts at low concentrations. Correlation analyses revealed that several VOCs emitted from foliage or soil are jointly regulated and that above and belowground sources are partially interconnected. With respect to VOC monitoring in tomato crops, our results underline that genetic variability, light-dependent de-novo synthesis, and belowground sources are factors to be considered for successful use in crop monitoring.