A new tetrahedrally distorted copper(II) complex derived from disulphide coupled N-(2-ethanethiol)salicylideneimine

Copper(II) acetate reacts with N-(2-ethanethiol)salicylideneimine forming an ONNO chelate of α,α′-(diethylenedisulphide)-N,N′-disalicylideneimine with an uncoordinated disulphide. This copper(II) complex can also be obtained in higher yield if the thiol is first oxidized to disulphide with iodine. The geometry about copper(II) is distorted from planar to a flattened tetrahedron.     

Determination of sulphide, polysulphide, thiocarbonates and sulphur by extraction with tributyltin hydroxide, and of thiosulphate by hydrogenation

The methods presented involve the separation of sulphur compounds by means of a hexane solution of tributyltin hydroxide (TBT), followed by titration with o-hydroxymercuribenzoic acid in the presence of dithizone as indicator. Free sulphide is selectively extracted from strongly alkaline solution, whereas the polysulphides and thiocarbonates are extracted at pH 9-10. The polysulphide and thiocarbonate extracts decompose to form TBT-sulphide, sulphur and carbon disulphide. Treatment with sulphite, stannate(II), copper, vinyl cyanide and ethylenediamine, and hydrogenation with zinc and hydrobromic acid have been applied in the course of the analysis. The sulphur is determined by its attack on copper to form copper(I) sulphide which is subsequently dissolved in aqueous potassium cyanide solution and the sulphide separated by extraction.     

Cobalt(III), nickel(II), and copper(II) complexes of 1-thia (or oxa)4,7-diazacyclononane and related mixed-ligand cobalt(III) complexes

Summary To investigate the effect of substitution of an oxygen or a sulphur donor atom for a nitrogen donor atom in a cyclic triamine, 1,4,7-triazacyclononane (tacn), cobalt(III), nickel(II), and copper(II) complexes of 1-oxa-4,7-diazacyclononane (taon) and 1-thia-4,7-diazacyclononane (tasn), and related mixed ligand cobalt(III) complexes were prepared and characterized. The coordination ability of an ether-oxygen or a thioether-sulphur atom increases when these atoms are incorporated into cyclic terdentate ligands. Electronic spectra reveal that ligand field strengths of these atoms are enhanced significantly. The presence of these heteroatoms affects circular dichroism spectra because of the increased flexibility of the chelate rings.     

X-ray photoelectron spectra of complexes with 1-(D-3-mercapto-2-methylpropionyl)-L-proline and Ni(II), Cd(II) and Cu(I): synthesis and LAXS study of Cu(I) derivative

Metal complexes of general formula Na2M(CAP)2xH2O (with M = Cd(II) or Ni(II), x = 7 and 4, respectively, CAP = 1-(D-3-mercapto-2-methylpropionyl)-L-proline) and NaCuCAPx3H2O have been synthesized as amorphous compounds and studied by means of X-ray photoelectron spectroscopy (XPS). Cu(I) derivative has been studied by IR, XPS and large-angle X-ray scattering (LAXS). IR data and the chemical shift of core level signals suggest that CAP is bonded to the metal via the sulphur atom and the carbonylic oxygen. LAXS data confirm this finding and are consistent with a tetrahedral configuration around the copper ion. The CAP molecule is bonded through the sulphur and the carbonylic oxygen and two water molecules complete the coordination around the metal. The sodium ion exhibits a tetrahedral configuration and interacts with the carboxylic group and two water molecules. One of these is bridging bonded between copper and sodium. No metal-nitrogen bonds are present.     

Chelating and bridging diphosphinoamine (PPh2)2N(iPr) complexes of copper(I)

The ligand bis(diphenylphosphino)isopropylamine (dppipa) has been shown to be a versatile ligand sporting different coordination modes and geometries dictated by copper(I). Most of the molecular structures were confirmed by X-ray crystallography. It is found in a chelating mode, in a monomeric complex when the ligand to copper ratio is 2:1. A tetrameric complex is formed when low ratios of ligand to metal (1:2) were used. But with increasing ratios of ligand to metal (1:1 and 2:1), a trimer or a dimer was obtained depending on the crystallization conditions. Variable temperature ³¹P{¹H} NMR spectra of these complexes in solution showed that the Cu–P bond was labile and the highly strained 4-membered structure chelate found in the solid state readily converted to a bridged structures. On the other hand, complexes with the ligand in a bridging mode in the solid state did not form chelated structures in solution. The effect of adding tetra-alkylammonium salts to solutions of various complexes of dppipa were probed by ³¹P{¹H} NMR and revealed the effect of counter ions on the stability of complexes in solution.     

Crystal structures of triazine-3-thione derivatives by reaction with copper and cobalt salts

The reaction of 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]triazine-3-thione L1H2OCH3 with copper(II) chloride leads to the formation of an organic molecule L2 containing two triazine rings linked by a new S-S bond. A binuclear copper(II) complex, 1, containing L1 is also isolated. The reaction of L1H2OCH3 with copper(I) chloride yields a hexanuclear cluster of copper(I), 2, in which the copper atoms form a distorted octahedron with the ligand L1 acting as an NS chelate and sulfur bridge, giving to the copper ion a trigonal geometry by one N and two S atoms. In any reaction of the disulfide L2 with metal salts, complexes containing this molecule are isolated. Reactions with copper(I) and copper(II) chloride and nickel(II) and cadmium(II) nitrate produce the S-S bond cleavage, giving complexes containing the triazine L1 behaving as the NS anion, which show spectroscopic characteristics identical with those formed by reaction with L1H2OCH3. However, the reaction with cobalt(II) nitrate gives a low-spin octahedral cobalt(III) complex, in which an asymmetric rupture of the disulfide L2 has been produced, giving an unexpected complex with a new ligand and keeping the S-S bond.     

Relationship between Coordination Structure and Biological Activity of Copper(II) Nicotinate

1 INTRODUCTION In 1945, Braude[1] found for the first time that adding copper (Cu) ten times the normal requisite amount into the feed can improve the production property of the animal obviously. Therefore, from then on copper has been widely applied in pig- breeding industry as an effective growth-promoting agent, especially in the process of intensive culture, which plays an important part in improving the growth of animal and the production property. However, at the same time, the high…     

Effect of chromium(III) and of other ions on the absorptiometric determination of copper with 2, 2'-biquinolyl

In the determination of small amounts of copper in certain alloys by liquid-liquid extraction of the bis-chelate of copper(I) with 2, 2'-biquinolyl, recovery of copper has been reported to be low when chromium(III) is present. The adverse effect of chromium(III) could be overcome by adding iron(II). It is now shown that the inhibiting effect of chromium is attributable to the formation of a kinetically inert ternary complex of chromium(III), copper(II) and citrate ions containing an equal number of atoms of each of the two metals. Copper can be displaced from this complex by any of the transition cations Mn(II), Fe(II), Co(II), Ni(II) and Zn(II). Zinc is shown to form a ternary complex formally analogous to that of copper. The formation of the ternary complexes has been studied polarographically. The formation of binuclear complexes of various hydroxy-acids is reviewed and a probable structure for the ternary complex is proposed which explains its stability and kinetic inertness. Analogies are drawn between this complex and ternary complexes of UO(2)(VI)-Al(III)-citrate and Cu(II)-Al(III)-tartrate which also cause interference in established analytical procedures.     

Interactions of Copper(I) Phenanthroline Chelate with Polyadenylic-Polyuridylic Acid in Aqueous Dioxane

Acid-base transformations in the system copper(I) phenanthroline chelate [Cu(phen)₂]⁺aq-poly-adenylic-polyuridylic acid in aqueous dioxane were studied by spectrophotometry. Changes in band intensi-ties, positions were revealed in the visible, near UV regions, dependent on the pH of the solution.Factor analysis was used to show that the absorption variance on titration of copper(I) bisphenanthrolinechelate is determined by mutual transformations of three spectral forms of complexes. Concentration profiles were calculated for compounds prevailing in the solution. In the presence of polyadenylic-polyuridylic acid, an additional spectral form appears as a result of a short-wave shift of the d-* MLCT transition in the copper(I) chelate complex. Analysis of the calculated concentration profiles established that the new complex is formed at pH 5.2-5.6 from the bisphenanthroline chelate and the double-helix rod-like form of the polymer.     

Mixed-ligand complex formation of (2,2′,2″-terpyridine)copper(I) and (2,2′2″-terpyridine)copper(II) with some sulfur-containing amino acids

Summary Mixed-ligand complex formation of copper(I) with 2,2,2-terpyridine (terpy) and various biologically significant sulfurcontaining amino acids, L [L = cysteine, penicillamine,N-acetylcysteine andN-acetylpenicillamine] was investigated. WithN-acetylcysteine andN-acetylpenicillamine, copper(I) complexes [Cu(terpy)L]HCl have been isolated and characterised. The amino acid in each case bonds to the copper(I) through the sulfur atom only. These complexes are readily oxidised to the corresponding copper(II) complexes which contain a Cu^II-S(mercaptide) bond as demonstrated by the (S)Cu^II LMCT at 420 nm. The e.p.r. and electronic spectroscopic results are consistent with a distorted octahedral structure. Reactions of copper(I) with terpy and cysteine/ penicillamine in weakly acidic medium produce complexes containing two different copper(II) centres. From a strongly acidic medium, a binary copper(I) terpyridine complex is obtained instead and is shown from i.r. spectral absorptions to contain a protonated pyridyl ring.     

Charge-transfer photochemistry of bis(diethyl-diselenocarbamato)copper(II)

The photochemical reactions of bis(diethyl-diselenocarbamato)copper(II), Cu(Et2dsc)2, complex have been studied in toluene, CH2Cl2, CHCl3 and chloroalkane/EtOH mixed solvents. Charge-transfer irradiation induces intramolecular oxidation of the ligand and reduction of copper(II) to copper(I) as evidenced by EPR and UV-Vis spectra of the complex as well as quantum yield results. When photolysis is carried out in CHCl3 or CH2Cl2 or in the solvent mixture CHCl3/EtOH resp. CH2Cl2/EtOH of lower than 1:1 EtOH content, the primary photoproduct CuI(Et2dsc) is further oxidised in a dark reaction with the chloroalkane producing the corresponding paramagnetic mixed-ligand CuII(Et2dsc)Cl complex in equilibrium with its chloride-bridged and EPR silent, dimeric form Cu2(Et2dsc)2Cl2. At low concentration of EtOH the equilibrium is shifted to the dimeric form whereas at higher than 1:1 EtOH content in the mixed solvent CHCl3/EtOH it is shifted to CuII(Et2dsc)Cl. A reaction mechanism is proposed and the role of ethanol is discussed.     

Stability of Cu(II) and Zn(II) Complexes with Pyridinecarbohydrazones of Pyridoxal-5-phosphate in Aqueous Solution

Composition of coordination compounds formed by copper(II) or zinc(II) ions and pyridine-2-, -3-, and -4-carbohydrazones of pyridoxal-5-phosphate in aqueous solution at 298.2 K, рН 7.4, I 0.25 has been studied by means of spectrophotometry. Conditional constants of the complexes stability have been determined. Cu(II) ions formed more stable ML₂ coordination compounds in comparison with Zn(II), zinc(II) ions are efficiently bound to the derivative of picolinic acid hydrazide to form the ML complex.     

Preconcentration of cobalt with N-(dithiocarboxy)sarcosine and amberlite xad-4 resin

Cobalt reacts with N-(dithiocarboxy)sarcosine (DTCS) to form a 1:3 Co:DTCS complex which is so stable that after its formation no decomposition occurs even in 4M hydrochloric acid. The complex is sorbed on a column of Amberlite XAD-4 copolymer from an acidic solution and eluted with 10 ml of a 1:1:3 v v mixture of 1.0M ammonia solution (pH = 9), 0.1M EDTA and methanol. The absorbance of the eluted chelate is measured at 320 nm against water ( = 2.15 x 10(4) l.mole(-1).cm(-1)). The recovery of cobalt from 1 litre of tap-water or sea-water is quantitative. The effect of diverse ions can be eliminated by the addition of EDTA after chelation of the cobalt. The copper complex with DTCS is partly sorbed on the column because of its slow rate of decomposition by EDTA, but most of the copper chelate sorbed can be eluted with hydrochloric acid and any co-eluted with the cobalt chelate can be completely decomposed by heating the eluate. Cobalt enrichment factors of at least 100 are obtained, so the method is applicable to the determination of cobalt at the ng ml level.     

Synthesis and structural characterization of a novel mixed-valent Cu(II)Cu(I)Cu(II) triangular metallomacrocycle using an imine-based rigid ligand

A novel neutral mixed-valent Cu(I)Cu(II)(2) triangular metallomacrocycle [Cu(3)L(2)(HL)].3CH(3)OH.2H(2)O (1) was assembled by reaction of the tetradentate ligand bis(N-salicylidene-4,4'-diphenylamine), H(2)L, with a copper(II) salt. ESI-MS show peaks only corresponding to the triangular structural species, indicating the high stability of the trimer structure in solution. Magnetic study confirms that there are two Cu(II) ions and one Cu(I) ion in a discrete triangular molecule. The crystal structure of 1 reveals that the triangle is formed by three deprotonated ligands and three copper ions with a Cu-Cu separation of ca. 11.8 A. Each copper atom is coordinated by two oxygen atoms and two nitrogen atoms from two different bis-bidentate ligands in a heavily distorted tetrahedral geometry, while each ligand is bound to two metal ions in a bis-bidentate coordination mode and links the metal centers overlapping in an unprogressive manner. Strong intramolecular pi.pi interactions between the ligands are found to stabilize the constraint conformation of the triangle. Electrochemical study reveals that the mixed-valent Cu(I)Cu(II)(2) complex is the most stable state in solution condition, and the electrochemical communication between the copper ions might be explained on the basis of the through-bond interaction. UV-vis-NIR spectral measurement demonstrates the Robin-Day class II behavior of the mixed-valence compound with a weak copper-copper interaction.     

Synthesis and characterization of mixed ligand complexes of copper(II), nickel(II), cobalt(II) and zinc(II) with glycine and uracil or 2-thiouracil

Mixed ligand complexes of Cu(II), Ni(II), Co(II) and Zn(II) formed with glycine and uracil or 2-thiouracil have been synthesized and characterized by elemental analysis, conductance, spectral (IR and electronic spectra) and magnetochemical measurements. Results show that glycine is bidentate in all cases; uracil behaves as a bidentate ligand in Cu(II) complex, coordinating through its one carbonyl oxygen and nitrogen, whereas in other cases it is only monodentate, coordinating only through nitrogen. With thiouracil, coordination occurs from carbonyl oxygen and one nitrogen in Cu(II) and Ni(II) complexes, but in the Co(II) complex coordination occurs from thionyl sulphur and nitrogen. In the Zn(II) complex it shows tridentate behaviour, coordinating through oxygen, sulphur and one nitrogen. Mixed Cu(II), Co(II) and Zn(II) complexes of uracil and of Ni(II) and Zn(II) with thiouracil are octahedral, whereas the mixed Ni(II) complex with uracil shows distorted tetrahedral geometry, and the mixed Co(II)-thiouracil complex is square planar. The mixed Cu(II)-thiouracil complex has a binuclear structure, with square planar arrangement around each copper atom.     

Synthesis,Structure and Fluorescence of a Copper(II) Complex [Cu_2(bipy)_2(Hpht)_2Cl](Hpht)(bipy=2,2'-Bipyridine,H_2pht=o-Phthalic Acid)

1 INTRODUCTION o-Phthalic acid (H2pht) is a versatile ligand for co-ordinating to metal ions in various modes, such asmonodentate bonding through a carboxylic O atom[1],bidentate fashion via two carboxylic O atoms[2] andtriple coordination through its three carboxylic Oatoms[3], and bridging mode with two or four Oatoms of its carboxylate groups[4]. The coordinationproperties thus allow for the preparation of complex-es with a large variety of architectures, forming iso-lated mono-, di…     

Tetrazole peptides as copper(II) ion chelators

The 1,5-disubstituted tetrazole ring a mimetic of the cis-amide bond is an unique element modifying the ability of peptides to chelate copper(II) ions. The position of the tetrazole ring system in the peptide backbone plays a critical role in the stabilization of the metallopeptide molecule. The insertion of a tetrazole between amide groups leads to enhancing the stability of the complex and to obtaining a very effective peptide chelating agent. These findings can provide important information for modeling biologically relevant peptide–metal binding sites. Some aspects of biological activity of tetrazole modified exogenous opioid peptides in the presence of copper(II) ions are also presented in this review.     

铜(II)/明胶(酶解明胶)络合物的制备及其络合形态的探讨

许多金属元素对于生物体是必需的,Ｎａ、Ｋ、Ｍｇ、Ｃａ、Ｍｎ、Ｆｅ、Ｃｏ、Ｃｕ、Ｍｏ和Ｚｎ在人体中的含量约３％;各种金属离子在生物体中具有不同的作用,其功能是很复杂的．铜在生物体内主要是进行氧化还原反应,起输送氧气和电子载体的作用．如果人体内缺乏铜,则...     

4-(8-quinolylazo)resorcinol and 1-(8-quinolylazo)-2-naphthol: Synthesis and sorption properties

A methodology of the synthesis of 4-(8-quinolylazo)resorcinol (QAR) and 1-(8-quinolylazo)-2-naphthol (QAN) was developed. The synthesized compounds were used to modify an oxidized charcoal sorbent. The sorbent efficiently adsorbs copper(II) and zinc(II) cations to form surface electroneutral chelate complexes. The conditions of sorption and desorption of zinc(II) and copper(II) were studied.     

Flow injection spectrophotometric determination of sub-mg dm(-3) silver(I) in a strongly acidic solution containing concentrated copper(II) using a pyridylazo reagent

A novel spectrophotometric flow injection method for determination of silver(I) in a strongly acidic solution containing concentrated copper(II) was developed using a coloring ligand, 4-(3,5-dibromo-2-pyridylazo)-N-ethyl-N-(3-sulfopropyl)aniline (3,5-diBr-PAESA). The method was first investigated by batch method. The interference from copper(II) chelate could be eliminated by the masking effect of EDTA. By utilizing the large formation constant (K = 12.3) of AgBr, one could determine silver(I) as a decrease of absorption by silver(I) chelate due to formation of AgBr by addition of KBr. Based on the results of batch experiments, two types of flow injection analysis (FIA) systems were constructed. Sub-mg dm(-3) determination of silver(I) was attained without interference from excess copper(II). The proposed method was successfully applied to determination of silver in a copper plating solution used in a plant to manufacture copper printed circuit boards, where the concentration of silver was critically important in the process control.