复合溶胶-凝胶法改善PBO纤维的光稳定性

分别以钛酸正丁酯(C16H36O4Ti)、醋酸(CH3COOH)、盐酸(HCl)、丙基三甲氧基硅烷(KH560)、苯基三甲氧基硅烷(Ph-TMS)、甲醇(CH3OH)和去离子水(H2O)为原料,氨水(NH3·H2O)为催化剂,分别采用溶胶-凝胶法和复合溶胶-凝胶法涂覆制备防老化聚亚苯基苯并二唑(PBO)纤维。通过粒度分析验证了纳米溶胶的成功制备,通过EDS能谱、SEM扫描电镜、接触角测定等分析测试PBO纤维表面的化学组成与物理性能,验证防老化PBO纤维的成功制备。以拉伸强度测试、SEM扫描电镜和表面接触角表征PBO纤维的防老化性能。结果表明:在氙灯耐气候试验箱经历130h的老化后,与未经过涂覆的PBO原纤相比,采用纳米TiO2水溶胶-凝胶法涂覆的PBO纤维拉伸强度保持率只提高了5%,利用纳米有机硅溶胶-凝胶法涂覆的PBO纤维拉伸强度保持率可提高10%,而经过纳米TiO2和有机硅溶胶-凝胶法涂覆的PBO纤维,拉伸强度保持率提高了27%,且老化后的纤维表面保持得非常完整。     

金纳米粒子修饰毛细管硅胶整体柱的制备及其电色谱性能研究

通过毛细管硅胶整体柱表面修饰十八烷基硫醇金纳米粒子,制备了一种新型毛细管电色谱固定相.制备金纳米粒子修饰整体柱时,采用溶胶-凝胶法制备毛细管硅胶整体柱,并在其表面化学修饰3-巯基丙基三甲氧基硅烷;通过巯基基团固载金纳米粒子于整体柱上,再共价键合十八烷基硫醇于金纳米粒子表面.以甲苯为探针,对理论塔板高度与流动相线速度之间...     

溶胶-凝胶法制备纳米Pb(Zr0.52Ti0.48)O3

溶胶-凝胶法;纳米晶;溶胶-凝胶法制备纳米Pb(Zr0.52Ti0.48)O3     

抗紫外老化聚对苯撑苯并二噁唑(PBO)纤维的制备与表征

通过化学添加2,5-二羟基对苯二甲酸(DHTA)共聚,以及添加金红石型纳米TiO2物理共混的方法,制备了聚对苯撑苯并二噁唑(PBO)的抗紫外改性纤维.考察了纤维的力学性能、特性粘度及表面形貌在紫外老化过程中的变化,并结合PBO纤维紫外加速老化后的红外分析,对PBO纤维的光老化机理进行了初步研究.结果表明,本实验所制备的DHPBO纤维以及DHPBO/n-TiO2纤维的抗紫外老化能力明显高于PBO纤维,并且金红石型纳米TiO2对PBO的抗紫外改性效果要优于有机紫外吸收剂(2,2'-(1,2-乙烷二基)双(4,1-亚苯基)双苯并噁唑).     

有机改性溶胶-凝胶固定联吡啶钌修饰电极的电化学行为

采用有机改性溶胶一凝胶制备技术,以四甲氧基硅烷(TMOW)和二甲基二甲氧基硅烷(OiMe-DiMOS)为共先驱体包埋聚苯乙烯磺酸钠(PSS),通过离子交换成功地将联吡啶钌固定在玻碳电极表面。电化学研究结果表明,被固定的联吡啶钌保持了良好的电化学活性,同时该方法制备的修饰电极对甲基安非他明有灵敏的电化学响应。     

二氧化钛/聚乙烯吡咯烷酮纳米复合薄膜的制备与表征

采用溶胶-凝胶法(so1 gel)制备了TiO2/聚乙烯吡咯烷酮(PVP)有机 无机纳米复合薄膜.采用扫描电子显微镜、接触角测定仪、红外光谱仪、紫外 可见吸收光谱仪和静 动摩擦系数测定仪对所制备的TiO2/PVP纳米复合薄膜进行了结构表征和性能研究.结果表明:所制备的TiO2/PVP纳米复合薄膜表面平整光滑、无裂纹、具有一定的疏水性、良好的透明性、防紫外线性能和减摩抗磨性能.     

溶胶凝胶法制备超疏水二氧化硅涂膜及其表面润湿行为

采用溶胶-凝胶法以正硅酸乙酯(TEOS)和甲基三乙氧基硅烷(MTES)为前驱体制备超疏水SiO2涂层。红外光谱(FTIR)和热重分析(TGA)表征合成SiO2的化学组成,通过透射电镜(TEM)和扫描电镜(TEM)观察制备SiO2的结构形貌,扫描电镜(SEM)和原子力显微镜(AFM)观察SiO2涂膜的表面形貌,通过测试水接触角(WCA)讨论SiO2涂层的表面微观结构与其表面疏水性能的关系。结果表明以TEOS和MTES为共前驱体可以制备得到表面带-CH3基团的SiO2溶胶,SiO2溶胶在老化过程中纳米SiO2粒子由于自组装作用形成草莓状微米-纳米双微观结构,这种结构赋予SiO2涂膜表面不同等级的粗糙度,使得水滴与涂膜表面接触时能够形成高的空气捕捉率和较小的粗糙度因子,与SiO2表面疏水性的-CH3基团共同作用形成类荷叶超疏水结构。     

SNAP溶胶组成对镁合金涂层耐蚀性的影响

本文利用纳米自组装颗粒工艺(SNAP)在AZ31B镁合金表面制备了防腐涂层。通过透射电镜(TEM)和扫描电镜(SEM)观察及电化学阻抗谱(EIS)、电导率测试等,对SNAP溶胶的纳米粒子形态和电导率,以及SNAP涂层的表面形貌和耐蚀性进行了测试,研究了不同含量的有机硅烷前躯体3-缩水甘油醚丙基三甲氧基硅烷(GPTMS)和正硅酸乙酯基硅烷(TEOS)、溶剂水、助溶剂无水乙醇、交联剂三乙烯四胺(TETA)等对镁合金SNAP涂层耐蚀性的影响。研究结果表明,随着溶胶中TEOS和TETA含量的增大,镁合金涂层耐蚀性呈先增大后减小的趋势;随着溶胶中水含量的增大,镁合金涂层耐蚀性提高;溶胶中无水乙醇的含量较低时,对镁合金涂层耐蚀性的影响较小。     

苯基化纳米MCM-41材料的制备与表征

以苯基三甲氧基硅烷为偶联剂对纳米MCM-41分子筛进行了有机改性,制备了苯基改性的纳米MCM-41分子筛MCM-41(m)。利用元素分析、粉末XRD、傅里叶变换红外光谱、氮气吸附-解吸附、扫描电镜和差热-热重分析对制备产物进行了表征。粉末XRD结果表明,改性过程中,分子筛骨架未被破坏,并且所制备MCM-41(m)分子筛结晶度依然很高;傅里叶变换红外光谱表明苯官能团已经成功地接枝到了分子筛的孔道表面,且所得产物的骨架依然完好;低温氮气吸附-解吸附分析结果表明,MCM-41(m)分子筛孔道具有高度有序性,改性的纳米MCM-41分子筛孔道内的硅羟基与苯基三甲氧基硅烷发生了硅烷化反应,苯基成功地接枝到了分子筛的孔道表面。扫描电镜结果表明, 制得的苯基改性纳米MCM-41平均尺寸为110 nm。差热-热重分析结果说明了所制备的苯基化的纳米MCM-41样品具有良好的热稳定性,骨架稳定温度为823 ℃。苯基化的纳米MCM-41材料具有作为催化剂材料的潜在应用前景。     

N掺杂TiO2纳米膜吸附胆红素分子的石英晶体微天平研究

以柠檬酸催化溶胶-凝胶法合成了晶粒尺寸为16.9 nm的锐钛矿型N掺杂TiO2(N-TiO2)纳米颗粒,并用旋转涂膜法制备了N-TiO2纳米薄膜.采用石英晶体微天平(QCM)技术研究了胆红素在纳米N-TiO2膜表面的吸附动力学行为,考察了缓冲溶液pH、硅烷亲脂试剂三甲基氯硅烷及金属离子修饰纳米N-TiO2膜对胆红素吸附...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.