支化型交替聚(苯乙烯-alt-马来酸酐)自组装胶束的制备及其乳化性能

利用支化型交替聚(苯乙烯-alt-马来酸酐)(BPSMA)在选择溶剂DMF-H2O中自组装制备球形胶束,以之作为新型颗粒乳化剂稳定白油-水体系,探讨胶束浓度和pH对BPSMA胶束乳化性能的影响。用紫外分光光度计(UV-Vis)追踪了聚合物溶液自组装过程,粒径及Zeta电位分析仪和透射电子显微镜(TEM)表征了BPSMA胶束的基本性质;利用光学显微镜分析了乳液性质;扫描电子显微镜(SEM)观察了胶束在固化后的油水界面的形貌。结果表明:BPSMA胶束具有优异的乳化效率,在极低的胶束质量浓度下(0.25~1.00mg/mL)亦可长期稳定白油-水乳液;BPSMA胶束所稳定的乳液具有明显的pH响应性,当pH≤6时,胶束呈球形颗粒状吸附并稳定于油水界面,当pH6时,胶束从油水界面脱离,乳液破乳;此外,BPSMA胶束作为颗粒乳化剂还具备良好的普适性,可以长效稳定碳酸二辛脂、辛酸丙基庚酯、硅油、棕榈酸异辛酯和润肤油脂等。     

双亲性共聚物P(St/VBT-co-MA)自组装胶束的制备及其乳化性能

以1-(4-乙烯基苄基)胸腺嘧啶(VBT)、苯乙烯(St)、马来酸酐(MA)为共聚单体,采用自由基聚合法制备了双亲性共聚物P(St/VBT-co-MA)(PSVM)。PSVM在选择性溶剂N,N-二甲基甲酰胺(DMF)的水溶液中进行自组装可形成胶束。利用透射电镜(TEM)和动态激光光散射(DLS)表征了自组装胶束的形态和粒径分布。以该胶束作为颗粒乳化剂稳定白油-水体系形成乳液,研究了PSVM胶束浓度、pH、盐浓度等对其乳化性能的影响,并用光学显微镜(OM)表征了其乳液形态。结果表明:通过自由基聚合的方法成功合成了双亲共聚物PSVM,其自组装形成粒径分布均匀的球形胶束;该胶束具有优异的乳化效率,其乳液长期稳定且具有pH响应性及强耐盐性,静置四个月后,乳液仍具有良好的乳化效果且乳液层高度基本不变。     

香豆素改性透明质酸颗粒乳化剂的制备及应用

利用7-(2-羟基乙氧基)-4-甲基香豆素(HEMC)疏水改性透明质酸(HA)制得光敏双亲大分子(HA-HEMC),并通过自组装形成了HA-HEMC胶体粒子。通过核磁共振氢谱和紫外分光光度计确定了HA-HEMC的结构及取代度;采用动态激光光散射、纳米粒度仪和透射电镜等手段对胶体粒子的性质及形貌进行了表征。进一步以HA-HEMC胶体粒子作为颗粒乳化剂稳定油水界面,研究了胶体粒子质量浓度、油相类型、水相pH和盐浓度对胶体粒子乳化性能的影响。结果表明:HA-HEMC可以在选择性溶剂中自组装形成粒径约为236nm的球形胶体粒子;该胶体粒子能够在较宽的pH范围内(3~11)稳定水包油型乳液且所得乳液有良好的耐盐性;此外,HAHEMC胶体粒子还能稳定多种油-水体系。     

双亲性无规光敏共聚物的疏水基元对其自组装胶束乳化性能的影响

设计合成了一系列具有不同化学组成的双亲性无规光敏共聚物,聚(7-对乙烯基苄氧基-4-甲基香豆素-r-丙烯酸)(P(VM-r-AA)),通过选择性溶剂法自组装获得纳米胶束,并将纳米胶束用作大分子颗粒乳化剂,研究其在甲苯-水界面的稳定性能。研究表明:聚合物疏水基元含量的增加使自组装胶束结构由溶胀的微凝胶状向刚性颗粒状转变;同时,胶束初始乳化效率增加,但油水界面吸附稳定性显著下降。此外,通过对疏水基元PVM的摩尔分数为12%的胶束进行辐照交联,并研究其在不同pH下的乳化性能,结果表明:胶束表面溶胀的双亲性链段对其乳化性能产生了重要的影响。未交联的胶束保持着良好的乳化性能;而交联的胶束形变能力变差、刚性增强,在碱性条件下,彻底失去乳化能力。     

Papain/HA-Phe自组装复合纳米粒子及乳化性能

用L-苯丙氨酸乙酯(L-Phe)改性透明质酸(HA)双亲性生物大分子(HA-Phe)负载生物活性分子木瓜蛋白酶(papain),HA-Phe和Papain通过静电、氢键和疏水相互作用自组装形成生物基Papain/HA-Phe复合纳米粒子.用动态光散射(DLS)和透射电镜(TEM)对复合纳米粒子的尺寸和形貌进行表征.结果显示,形成的复合纳米粒子为球形结构,粒径约308 nm.以此复合纳米粒子为颗粒乳化剂稳定白油,形成水包油型Pickering乳液.乳液的扫描电镜(SEM)显示,复合纳米粒子吸附在油水界面,形成复合纳米粒子的吸附层以稳定乳液.详细研究了pH和盐浓度对复合纳米粒子性质和复合纳米粒子乳化性能的影响.结果表明,随着pH增加,复合纳米粒子在油滴表面的吸附数目减少,乳化性能降低;随着盐浓度增加,复合纳米粒子的形变能力增强,乳化性能提高.进一步研究了乳液中木瓜蛋白酶的活性及美白效果.研究表明,制备的乳液保留了一定的活性,且具有一定的美白效果.     

肉桂酸改性透明质酸颗粒乳化剂的制备及性能

将具有紫外吸收性能的单体肉桂酸(CA)引入天然大分子透明质酸(HA)中,制得疏水性改性HA(HA-CA),然后在二甲亚砜与水的混合溶剂中自组装制备HA-CA胶体粒子,并以之为颗粒乳化剂稳定油水界面制备Pickering乳液。通过紫外、核磁、纳米粒度仪、透射电镜、光学显微镜等方法对HA-CA、HA-CA胶体粒子及其所稳定的乳液进行表征。结果表明,HA-CA可以在选择性溶剂中自组装形成粒径约为95nm的球形胶体粒子;所得的HA-CA胶体粒子可以有效地稳定油/水界面,制备水包油(O/W)型的Pickering乳液,且所得乳液具有良好的耐盐性和细胞相容性;此外该胶体粒子可稳定多种油/水体系,具有一定普适性。     

颗粒乳化剂的研究及应用

近年来,颗粒乳化剂因其在食品、采油、化妆品、医药、催化以及功能纳米材料制备等领域具有潜在应用前景而备受关注。本文综述了近来颗粒乳化剂的研究进展,归纳了颗粒乳化剂的种类,包括:无机纳米粒子、表面改性或杂化的无机粒子、有机纳米粒子以及特殊的颗粒乳化剂Janus粒子;并对颗粒乳化剂能够在油水界面稳定吸附的热力学机理和动力学行为进行了阐述,颗粒乳化剂在油水界面接触角以及粒径大小是其在界面稳定吸附的关键参数,而颗粒在油水界面的排布方式则主要受粒子之间相互作用的影响。重点介绍了颗粒乳化剂的热点应用,包括:(1)利用颗粒乳化剂制备Pickering乳液,以及通过对颗粒乳化剂的功能化,使得Pickering乳液具备环境响应性(即pH、盐浓度、温度、紫外光、磁场敏感响应性);(2)以颗粒乳化剂为构筑基元、以Pickering乳液为模板制备Janus颗粒、Colloidosome、具有多级结构的粒子或膜,以及多孔结构材料;(3) Janus粒子在催化领域的应用。     

共溶剂性质对双亲性无规共聚物P(St-co-DM)胶束化行为及其性能的影响

以苯乙烯(St)和甲基丙烯酸二甲氨乙酯(DMAEMA)为共聚单体, 通过普通自由基溶液聚合合成了双亲性无规共聚物P(St-co-DM). 用傅里叶变换红外(FTIR)光谱、核磁共振氢谱(¹H NMR)、凝胶渗透色谱(GPC)和差示扫描量热(DSC)仪对聚合物结构进行表征. 研究了共溶剂的性质对P(St-co-DM)自组装胶束结构及其乳化性能的影响. 用透射电镜(TEM)和动态激光光散射(DLS)表征了自组装胶体粒子的形态、粒径大小及其分布. 通过测量胶束在甲苯/水界面的接触角表征胶束表面性能. 结果表明: P(St-co-DM)以四氢呋喃(THF)为共溶剂自组装时, 胶束的临界聚集水含量较大, 胶束表面亲水性较强, 流体力学半径较大; 用二氧六环或THF为共溶剂, 水为选择性溶剂, P(St-co-DM)自组装可以得到外层松散、内层比较密实的球状胶束, 用N,N-二甲基甲酰胺(DMF)为共溶剂时, 胶束整体呈现比较密实的球状胶束; 分别用DMF、二氧六环和THF为共溶剂制备的胶束, 其接触角均值都小于90°, 可形成O/W型(水包油型)乳液. 乳化实验结果表明, 以二氧六环和THF为共溶剂制备的胶束作为颗粒乳化剂制备的乳液性能较好.     

马来松香酸和纳米氧化铝颗粒协同稳定具有pH响应性的Pickering乳液

使用有机颗粒稳定Pickering乳液受到越来越多的关注, 润湿性可调的有机颗粒且结合纳米无机颗粒协同稳定不同类型的Pickering乳液却鲜有报道. 系统研究了基于具有多羧酸基团的松香基衍生物马来松香(MPA)与纳米Al₂O₃颗粒在不同pH条件下形成的乳液类型及相关机理. 研究发现, 在单一MPA颗粒体系条件下, pH可以诱导乳液的类型由W/O Pickering乳液到O/W Pickering乳液, 到最后O/W乳液的转变, MPA的亲水性随着pH升高而增强是该乳液转变的原因. 当纳米Al₂O₃颗粒加入到MPA中后, 吸附在MPA颗粒上的亲水性Al₂O₃导致MPA颗粒亲水性增加, 从而可以使W/O Pickering乳液转变为O/W Pickering乳液(pH=1). 当pH=6时, MPA分子与纳米Al₂O₃颗粒同时具有较强的亲水性且分别无法形成稳定的乳液, 但两者的混合体系可以形成稳定的W/O Pickering乳液, 这是因为MPA分子与纳米Al₂O₃颗粒可以在水溶液中形成疏水性较强的络合物. 另外, 研究了MPA浓度及油相体积分数对乳液外观及粒径的影响, 发现随着MPA浓度增加Pickering乳液的粒径逐渐减小, 增加油相的体积分数会引起粒径的增大. 最后, 利用Zeta电势、颗粒在油水界面吸附率、接触角及表/界面张力研究了稳定Pickering乳液的稳定机理, 在油水界面上吸附的类似盔甲状颗粒层及颗粒层之间形成的网状结构是乳液液滴保持稳定的原因. 为Pickering乳液的绿色化制备提供了一种新的途径, 将在化妆品、医药及新材料等领域得到重要应用.     

高分子单链键接Fe_3O_4制备Janus复合纳米颗粒

采用溶剂热法制备油酸保护的Fe_3O_4纳米颗粒,通过硅烷配体交换在颗粒表面引入氨基.基于氨基快速淬灭阳离子活性种,将阳离子聚合制备的活性高分子链如聚(4-氯甲基苯乙烯)键接到氨基改性的Fe_3O_4纳米颗粒表面,制备高分子链/Fe_3O_4复合纳米颗粒.分子量决定键接活性高分子链数目.当高分子流体力学尺寸大于纳米颗粒直径时,空间排斥效应保证单根高分子链键接到Fe_3O_4纳米颗粒(10 nm),得到呈降落伞结构的复合Janus纳米颗粒,高分子链分布在Fe_3O_4颗粒一侧.当高分子链尺寸较小时,多根高分子链键接到纳米颗粒表面.研究了该复合Janus纳米颗粒双亲特性.作为固体乳化剂可容易乳化水/油体系得到稳定乳液.该Janus纳米颗粒在油水界面通过自组装可得到单层薄膜.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.