193 nm激光引发PET表面的化学接枝

将聚对苯二甲酸乙二醇酯[Poly(ethylene terephthalate), PET]材料置于氨气气氛中, 利用激光光子同时激发材料表面及氨气形成自由基, 用激光引发反应并促进氨基在材料表面的接枝. 改性后的测试结果表明, 材料表面粗糙度没有显著变化, 但水接触角的减小表明表面化学结构发生了某种变化. 傅里叶变换红外光谱(FTIR/ATR)图谱在3352和1613 cm-1处出现了新的氨基吸收峰, 证实了表面接枝了氨基. 同时X射线光电子能谱(XPS)也证明了材料表面C—N键的存在, 其C1s结合能为285.5 eV, N1s为398.9 eV. 飞行时间二次离子质谱(Tof-SIMS)也检测到含氨基的分子碎片, 其碎片成像图显示接枝仅发生在激光辐照部位. 实验结果表明, 激光能在生物材料表面进行局部区域的选择性接枝.     

PET表面的碳氟等离子体改性及其表面动力学的研究 Ⅲ.表面能分析方法在表面动力学中的应用

ＰＥＴ表面的碳氟等离子体改性及其表面动力学的研究Ⅲ．表面能分析方法在表面动力学中的应用张亮＊（北京大学物理系介观物理国家重点实验室北京１００８７１）王建祺张新生（北京理工大学化工与材料学院北京）（北京教育学院宣武区分院北京）关键词聚对苯二甲酸乙二醇酯...     

纳米SiO2表面上的聚对苯二甲酸丁二醇酯预聚物接枝改性

纳米SiO2表面上的聚对苯二甲酸丁二醇酯预聚物接枝改性;纳米粒子; 表面改性;接枝; 聚对苯二甲酸丁二醇酯     

聚对苯二甲酸乙二酯的等离子体表面改性研究

阐述了等离子体原理,综述了等离子体对聚对苯二甲酸乙二酯表面改性的研究工作,大量的实验数据表明了这种方法可以成功改善各种性能。等离子体处理后PET材料表面粗糙度增加,并产生化学基团,因此可改善以下各种性能:润湿性、粘接性、染色性、抗静电性,对人体的生物相容性,添加TiO2的杀菌性,PET表面化学镀金属的性能。PET表面的刻蚀作用,导致其重量的减轻,可替代部分碱减量处理。     

聚酯的生物改性

从四个方面综述了近年来聚对苯二甲酸乙二酯(PET)和聚对苯二甲酸丁二酯(PBT)生物改性的研究进展:(1)在聚酯合成中采用生物原料;(2)采用共聚技术制备可生物降解性共聚酯;(3)生物活性物质在聚酯中的引入改性,可提高其生物相容性和抗菌能力,在聚酯用于人造器官时,可使血管纤维原细胞的细胞增殖;(4)生物酶对聚酯进行水解改性,可减轻重量,并改善吸湿性、染色性等性能。     

取向PET薄膜偶极热松弛的研究

用纵拉、先纵后横、纵-横-纵等拉伸方式得到了各种平面取向程度的PET薄膜。短路热释电流温谱显示α峰随平面取向度增大向高温线性移动。被冻结的大分子主链链段偶极热松弛活化能随反式构象含量增大呈线性下降。热松弛时间常数则随反式构象含量增大而增长。     

聚对苯二甲酸乙二酯微流控芯片的制备和表面改性

高聚物微流控芯片具有制备简单、成本低、可批量生产等突出优点而有望成为一次性器件,近年来在国内外引起了同行们的兴趣.但是,高聚物表面的憎水性、对有机分子的强吸附性、电渗流的不稳定性等又成为高聚物芯片在微流控分析领域得以广泛应用的障碍.表面改性是改善高聚物芯片分析特性的有效途径.     

碳氟等离子体改性PET表面的反应机制的研究

利用CF₄与cH₄/CF₄等离子体来处理涤沦膜(PET),讨论了不同摩尔比的碳氟等离子体改性PET表面的作用机制.利用变角x光电子能谱(XPS)和接触角测试技术研究了改性后PET表面的结构和性质.结果表明,碳氟等离子体的处理可以显著地改善PET表面的憎水性.不同摩尔比的碳氟混合气体的作用机制不同,其中碳氟混合气体等离子体以聚合为主,在PET表面形成均匀的改性层;而纯CF₄气体则以刻蚀为主,含氟基团主要分布在PET表面.     

PET/PEN/DBS共混体系结构与形貌的研究

共混是改善聚合物性能的一种简单而又行之有效的方法,PET和PEN均为结晶性聚酯,由于PEN合成原料的影响,致使PEN的价格较高,但性能比PET优良,通过二者的共混,既可以提高PET的性能,又可以降低PEN成本,有关PET／PEN共混体系的研究已引起人们的关注,而对于共混体系结晶形态和结晶条件的研究较少,由于成核剂能够提高结晶速率,减小球晶尺寸,因此本文对PET／PEN／DBS共混体系中,组分组成的影响及不同结晶条件下共混物的结晶形貌进行研究。     

PET/PEN共混体系结构与性能研究进展

综述了国内外PET/PEN共混体系的研究进展,重点论述了PET/PEN共混体系的结晶性能相容性酯交换影响因素、结晶动力学,并对其应用前景做了展望.     

Shape Memory Properties in Poly(ethylene oxide)–Poly(ethylene terephthalate) Copolymers

Memory effects of several copolymers of poly(ethylene oxide) (PEO) and poly(ethylene terephthalate) (PET) were illustrated with photos, determined with shrinkage experiments and characterized by the recovery of samples to their original figures. Copolymers of appropriate composition could undertake an approximately full recovery which is tightly related to the annealing temperature at which shrinkage of samples occurs to some extent. Melting and recrystallization of PEO segments may be responsible for the memory effect. The memory properties of samples almost kept unchanged after many fatigue cycles (e.g. 15–20 cycles), which could make these copolymers useful in practical applications as novel shape memory materials. © 1997 John Wiley & Sons, Ltd.     

聚N—乙烯基吡咯烷酮分散钯催化剂加氢性能的研究

制备了聚N-乙烯基吡咯烷酮分散钯催化剂,考察了它对不同底物的加氢活性和在不同介质中对丙烯酸甲酯的加氢活性。结果表明,不同底物的加氢活性和反应级数都有很大的差别,且反应介质对丙烯酸甲酯的加氢速率也有很大影响。还得到了丙烯酸甲酯加氢反应的速率方程。     

The influence of vacuum-ultraviolet radiation on poly(ethylene terephthalate)

Poly(ethylene terephthalate) was exposed to radiation from different kinds of low-pressure plasmas in an oxygen atmosphere. The lower wavelength limit of the spectrum investigated, λ = 112 nm, is the cut-off of magnesium fluoride used for separating the specimen chamber from the plasma light source. The total surface oxygen concentration, and the formation of hydroxyl, carbonyl, and carboxyl groups were evaluated from XPS measurements in combination with chemical derivatizations, and their dependences on the radiation spectrum and the oxygen pressure in the sample chamber have been investigated. © 1996 John Wiley & Sons, Inc.     

Surface morphology and amide concentration depth profile of aminolyzed poly(ethylene terephthalate) films

Surface of biaxially oriented poly(ethylene terephthalate) films was chemically modified by exposure to ethylenediamine (EDA), triethylenetetramine (TETA), and tetraethylenepentamine (TEPA) for different treatment times. Variable angle attenuated total reflection Fourier transform infrared (ATR‐FTIR) spectroscopy was used in conjunction with weight loss measurements, scanning electron microscopy (SEM), and atomic force microscopy to establish the surface modification and to draw the depth profile of the newly created species, with emphasis on amide group. A clear differentiation was found between the effects of the three amines studied: EDA produces the highest amidation degree but, because of its deep penetration into the film, leads to delamination of rather thick layers, TETA reacts at and near surface and develops surface cracks without delamination, and TEPA is the mildest reactant, generating amide groups on the surface without visible deterioration of the sample. It was proved that the amide II absorption band became weaker with increasing analyzed depth, with a pronounced heterogeneity near the surface. SEM micrographs showed the development of cracks onto the surface at longer aminolysis time, which allowed a better understanding of ATR‐FTIR observations. Assuming an exponential decay for the depth profile spectrally obtained, the surface concentration of amide groups and the decay constant were determined for the amines and reaction times used. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

聚丙烯／聚对苯二甲酸乙二酯共混自增强材料的研究

聚丙烯／聚对苯二甲酸乙二酯共混自增强材料的研究陈鸣才，黄玉惠，赵树录，廖兵，林果，丛广民（中国科学院广州化学研究所广州５１０６５０）关键词聚丙烯，聚对苯二甲酸乙二酯，高分子共混物，自增强材料聚对苯二甲酸乙二酯（ＰＥＴ）具有良好的成纤性和透明性，但收缩...     

非晶聚对苯二甲酸乙二酯的制备与表征

采用引入U-polymer的路线制备了非晶聚对苯二甲酸乙二酯(APET).用DSC和DMA等手段研究了APET的性能.结果表明,经改性后得到的APET无结晶,透明性得到改善,玻璃化转变温度和储能模量都较PET有一定程度提高.     

Poly(ethylene terephthalate) copolymers containing nitroterephthalic units. I. Synthesis and characterization

The synthesis, microstructure, and thermal behavior of a series of poly(ethylene terephthalate) (PET) copolymers containing nitroterephthalic units are described. These novel copolyesters were synthesized by transesterification followed by melt copolycondensation of dimethyl terephthalate and dimethyl nitroterephthalate mixtures with ethylene glycol. The molar ratio of the two comonomers in the feed varied from 95/5 to 25/75. Furthermore, PET and poly(ethylene nitroterephthalate) homopolymers were synthesized with the same method and comparatively studied. Copolyester compositions were practically the same as in the feed, and weight‐average molecular weights ranged from 10,000 to 60,000. The two monomeric units were randomly distributed along the polymer chain, and the experimentally determined average sequence lengths were in accordance with ideal copolycondensation statistics. Melting temperatures and enthalpies of the copolyesters decreased with increasing content in nitroterephthalic units, and they all showed a single glass‐transition temperature superior to that of PET. They appeared to be stable up to 300 °C, and thermal degradation occurred in two well‐differentiated steps. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3761–3770, 2000     

Thermal,crystallization, mechanical,and rheological characteristics of poly(trimethylene terephthalate)/poly(ethylene terephthalate) blends

Blends of poly(trimethylene terephthalate) (PTT) and poly(ethylene terephthalate) in the amorphous state were miscible in all of the blend compositions studied, as evidenced by a single, composition‐dependent glass‐transition temperature observed for each blend composition. The variation in the glass‐transition temperature with the blend composition was well predicted by the Gordon–Taylor equation, with the fitting parameter being 0.91. The cold‐crystallization (peak) temperature decreased with an increasing PTT content, whereas the melt‐crystallization (peak) temperature decreased with an increasing amount of the minor component. The subsequent melting behavior after both cold and melt crystallizations exhibited melting point depression behavior in which the observed melting temperatures decreased with an increasing amount of the minor component of the blends. During crystallization, the pure components crystallized simultaneously just to form their own crystals. The blend having 50 wt % of PTT showed the lowest apparent degree of crystallinity and the lowest tensile‐strength values. The steady shear viscosity values for the pure components and the blends decreased slightly with an increasing shear rate (within the shear rate range of 0.25–25 s^?1); those of the blends were lower than those of the pure components. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 676–686, 2004     

Miscibility of poly(ethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends by transesterification

The effects of transesterification on the miscibility of poly(ethylene terephthalate)/poly(ethylene 2,6-naphthalate) were studied. Blends were obtained by solution precipitation at room temperature to avoid transesterification during blend preparation. The physical blends and transesterified products were analyzed by wide-angle x-ray scattering, differential scanning calorimetry, and nuclear magnetic resonance spectroscopy. It was found that the physical blends are immiscible and when the extent of transesterification reaches 50% of the completely randomized state, independent of blend composition, the blends are not crystallizable and show a single glass transition temperature between those of starting polymers. The interchange reactions were significantly influenced by annealing temperature and time but negligibly by blend composition. © 1996 John Wiley & Sons, Inc.     

Poly(ethylene terephthalate) modified with aromatic bisester diamides: Thermal and oxygen barrier properties

The synthesis and properties of poly(ethylene terephthalate) (PET) copolymers containing four bisester diamide structural units are reported. Two of the bisester diamides consist of three para‐substituted aromatic rings, and the other two consist of three meta‐substituted aromatic rings. The copolymers have been characterized by nuclear magnetic resonance, differential scanning calorimetry, and dilute solution viscometry. Three of the copolymers can be compression‐molded into amorphous films for oxygen barrier testing, and one of these three films can be oriented for additional barrier testing. The three amorphous films all have lower permeabilities than unoriented PET. However, this difference diminishes upon the orientation of the polymer films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1668–1681, 2004